+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Common board functions for siemens AM335X based boards
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * U-Boot file:/board/ti/am335x/board.c
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <malloc.h>
-#include <serial.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <watchdog.h>
-#include <asm/mach-types.h>
-#include "eeprom.h"
-#include "factoryset.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-
-#ifdef CONFIG_SPL_BUILD
-void set_uart_mux_conf(void)
-{
- enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
- /* Initalize the board header */
- enable_i2c0_pin_mux();
-
- /* enable early the console */
- gd->baudrate = CONFIG_BAUDRATE;
- serial_init();
- gd->have_console = 1;
-
- siemens_ee_setup();
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- enable_board_pin_mux();
-}
-
-void sdram_init(void)
-{
- spl_siemens_board_init();
- board_init_ddr();
-
- return;
-}
-#endif /* #ifdef CONFIG_SPL_BUILD */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * Basic board specific setup. Pinmux has been handled already.
- */
-int board_init(void)
-{
-#if defined(CONFIG_HW_WATCHDOG)
- hw_watchdog_init();
-#endif /* defined(CONFIG_HW_WATCHDOG) */
- if (siemens_ee_setup() < 0)
- puts("Could not get board ID.\n");
-#ifdef CONFIG_MACH_TYPE
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
-#endif
- gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_FACTORYSET
- factoryset_read_eeprom(SIEMENS_EE_I2C_ADDR);
-#endif
-
- gpmc_init();
-
- return 0;
-}
-#endif /* #ifndef CONFIG_SPL_BUILD */
-
-#define OSC (V_OSCK/1000000)
-const struct dpll_params dpll_ddr = {
- DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
- return &dpll_ddr;
-}
-
-#ifndef CONFIG_SPL_BUILD
-
-#define MAX_NR_LEDS 10
-#define MAX_PIN_NUMBER 128
-#define STARTUP 0
-
-#if defined(BOARD_DFU_BUTTON_GPIO)
-unsigned char get_button_state(char * const envname, unsigned char def)
-{
- int button = 0;
- int gpio;
- char *ptr_env;
-
- /* If button is not found we take default */
- ptr_env = env_get(envname);
- if (NULL == ptr_env) {
- gpio = def;
- } else {
- gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0);
- if (gpio > MAX_PIN_NUMBER)
- gpio = def;
- }
-
- gpio_request(gpio, "");
- gpio_direction_input(gpio);
- if (gpio_get_value(gpio))
- button = 1;
- else
- button = 0;
-
- gpio_free(gpio);
-
- return button;
-}
-/**
- * This command returns the status of the user button on
- * Input - none
- * Returns - 1 if button is held down
- * 0 if button is not held down
- */
-static int
-do_userbutton(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- int button = 0;
- button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO);
- button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO);
- return button;
-}
-
-U_BOOT_CMD(
- dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
- "Return the status of the DFU button",
- ""
-);
-#endif
-
-static int
-do_usertestwdt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- printf("\n\n\n Go into infinite loop\n\n\n");
- while (1)
- ;
- return 0;
-};
-
-U_BOOT_CMD(
- testwdt, CONFIG_SYS_MAXARGS, 1, do_usertestwdt,
- "Sends U-Boot into infinite loop",
- ""
-);
-
-/**
- * Get led gpios from env and set them.
- * The led define in environment need to need to be of the form ledN=NN,S0,S1
- * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0
- * defines the startup state of the led, S1 the special state of the led when
- * it enters e.g. dfu mode.
- */
-void set_env_gpios(unsigned char state)
-{
- char *ptr_env;
- char str_tmp[5]; /* must contain "ledX"*/
- unsigned char i, idx, pos1, pos2, ccount;
- unsigned char gpio_n, gpio_s0, gpio_s1;
-
- for (i = 0; i < MAX_NR_LEDS; i++) {
- sprintf(str_tmp, "led%d", i);
-
- /* If env var is not found we stop */
- ptr_env = env_get(str_tmp);
- if (NULL == ptr_env)
- break;
-
- /* Find sperators position */
- pos1 = 0;
- pos2 = 0;
- ccount = 0;
- for (idx = 0; ptr_env[idx] != '\0'; idx++) {
- if (ptr_env[idx] == ',') {
- if (ccount++ < 1)
- pos1 = idx;
- else
- pos2 = idx;
- }
- }
- /* Bad led description skip this definition */
- if (pos2 <= pos1 || ccount > 2)
- continue;
-
- /* Get pin number and request gpio */
- memset(str_tmp, 0, sizeof(str_tmp));
- strncpy(str_tmp, ptr_env, pos1*sizeof(char));
- gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0);
-
- /* Invalid gpio number skip definition */
- if (gpio_n > MAX_PIN_NUMBER)
- continue;
-
- gpio_request(gpio_n, "");
-
- if (state == STARTUP) {
- /* get pin state 0 and set */
- memset(str_tmp, 0, sizeof(str_tmp));
- strncpy(str_tmp, ptr_env+pos1+1,
- (pos2-pos1-1)*sizeof(char));
- gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL,
- 0);
-
- gpio_direction_output(gpio_n, gpio_s0);
-
- } else {
- /* get pin state 1 and set */
- memset(str_tmp, 0, sizeof(str_tmp));
- strcpy(str_tmp, ptr_env+pos2+1);
- gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL,
- 0);
- gpio_direction_output(gpio_n, gpio_s1);
- }
- } /* loop through defined led in environment */
-}
-
-static int do_board_led(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- if (argc != 2)
- return CMD_RET_USAGE;
- if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP)
- set_env_gpios(0);
- else
- set_env_gpios(1);
- return 0;
-};
-
-U_BOOT_CMD(
- draco_led, CONFIG_SYS_MAXARGS, 2, do_board_led,
- "Set LEDs defined in environment",
- "<0|1>"
-);
-#endif /* !CONFIG_SPL_BUILD */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common board functions for siemens AM335X based boards
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * U-Boot file:/board/ti/am335x/board.c
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ */
+
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <errno.h>
+#include <init.h>
+#include <malloc.h>
+#include <serial.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <watchdog.h>
+#include <asm/mach-types.h>
+#include "board_am335x.h"
+#include "eeprom.h"
+#include "factoryset.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+
+#ifdef CONFIG_SPL_BUILD
+void set_uart_mux_conf(void)
+{
+ enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+
+ /* enable early the console */
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init();
+ gd->have_console = 1;
+
+ siemens_ee_setup();
+ if (draco_read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ enable_board_pin_mux();
+}
+
+void sdram_init(void)
+{
+ spl_draco_board_init();
+ draco_init_ddr();
+
+ return;
+}
+#endif /* #ifdef CONFIG_SPL_BUILD */
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+#if defined(CONFIG_HW_WATCHDOG)
+ hw_watchdog_init();
+#endif /* defined(CONFIG_HW_WATCHDOG) */
+ if (siemens_ee_setup() < 0)
+ puts("Could not get board ID.\n");
+#ifdef CONFIG_MACH_TYPE
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+#endif
+ gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_FACTORYSET
+ factoryset_read_eeprom(SIEMENS_EE_I2C_ADDR);
+#endif
+
+ gpmc_init();
+
+ return 0;
+}
+#endif /* #ifndef CONFIG_SPL_BUILD */
+
+#define OSC (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {
+ DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+#ifndef CONFIG_SPL_BUILD
+
+#define MAX_NR_LEDS 10
+#define MAX_PIN_NUMBER 128
+#define STARTUP 0
+
+#if defined(BOARD_DFU_BUTTON_GPIO)
+unsigned char get_button_state(char * const envname, unsigned char def)
+{
+ int button = 0;
+ int gpio;
+ char *ptr_env;
+
+ /* If button is not found we take default */
+ ptr_env = env_get(envname);
+ if (NULL == ptr_env) {
+ gpio = def;
+ } else {
+ gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0);
+ if (gpio > MAX_PIN_NUMBER)
+ gpio = def;
+ }
+
+ gpio_request(gpio, "");
+ gpio_direction_input(gpio);
+ if (gpio_get_value(gpio))
+ button = 1;
+ else
+ button = 0;
+
+ gpio_free(gpio);
+
+ return button;
+}
+/**
+ * This command returns the status of the user button on
+ * Input - none
+ * Returns - 1 if button is held down
+ * 0 if button is not held down
+ */
+static int
+do_userbutton(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ int button = 0;
+ button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO);
+ button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO);
+ return button;
+}
+
+U_BOOT_CMD(
+ dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
+ "Return the status of the DFU button",
+ ""
+);
+#endif
+
+static int
+do_usertestwdt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ printf("\n\n\n Go into infinite loop\n\n\n");
+ while (1)
+ ;
+ return 0;
+};
+
+U_BOOT_CMD(
+ testwdt, CONFIG_SYS_MAXARGS, 1, do_usertestwdt,
+ "Sends U-Boot into infinite loop",
+ ""
+);
+
+/**
+ * Get led gpios from env and set them.
+ * The led define in environment need to need to be of the form ledN=NN,S0,S1
+ * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0
+ * defines the startup state of the led, S1 the special state of the led when
+ * it enters e.g. dfu mode.
+ */
+void set_env_gpios(unsigned char state)
+{
+ char *ptr_env;
+ char str_tmp[5]; /* must contain "ledX"*/
+ unsigned char i, idx, pos1, pos2, ccount;
+ unsigned char gpio_n, gpio_s0, gpio_s1;
+
+ for (i = 0; i < MAX_NR_LEDS; i++) {
+ sprintf(str_tmp, "led%d", i);
+
+ /* If env var is not found we stop */
+ ptr_env = env_get(str_tmp);
+ if (NULL == ptr_env)
+ break;
+
+ /* Find sperators position */
+ pos1 = 0;
+ pos2 = 0;
+ ccount = 0;
+ for (idx = 0; ptr_env[idx] != '\0'; idx++) {
+ if (ptr_env[idx] == ',') {
+ if (ccount++ < 1)
+ pos1 = idx;
+ else
+ pos2 = idx;
+ }
+ }
+ /* Bad led description skip this definition */
+ if (pos2 <= pos1 || ccount > 2)
+ continue;
+
+ /* Get pin number and request gpio */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env, pos1*sizeof(char));
+ gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0);
+
+ /* Invalid gpio number skip definition */
+ if (gpio_n > MAX_PIN_NUMBER)
+ continue;
+
+ gpio_request(gpio_n, "");
+
+ if (state == STARTUP) {
+ /* get pin state 0 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env+pos1+1,
+ (pos2-pos1-1)*sizeof(char));
+ gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+
+ gpio_direction_output(gpio_n, gpio_s0);
+
+ } else {
+ /* get pin state 1 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strcpy(str_tmp, ptr_env+pos2+1);
+ gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+ gpio_direction_output(gpio_n, gpio_s1);
+ }
+ } /* loop through defined led in environment */
+}
+
+static int do_board_led(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+ if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP)
+ set_env_gpios(0);
+ else
+ set_env_gpios(1);
+ return 0;
+};
+
+U_BOOT_CMD(
+ draco_led, CONFIG_SYS_MAXARGS, 2, do_board_led,
+ "Set LEDs defined in environment",
+ "<0|1>"
+);
+#endif /* !CONFIG_SPL_BUILD */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board definitions for draco products
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _BOARD_AM335X_H_
+#define _BOARD_AM335X_H_
+
+#include "eeprom.h"
+
+/* Common functions with product specific implementation */
+void spl_draco_board_init(void);
+void draco_init_ddr(void);
+int draco_read_eeprom(void);
+
+#ifdef CONFIG_SPL_BUILD
+/* Mux for init: uart?, i2c0 to read the main EEPROM */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+
+/* Main mux function to enable other pinmux required on the board */
+void enable_board_pin_mux(void);
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _BOARD_AM335X_H_ */
endif
obj-y += board.o
+obj-y += ../common/board_am335x.o
obj-y += ../common/eeprom.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(void)
+int draco_read_eeprom(void)
{
/* Read Siemens eeprom data (DDR3) */
if (siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, (uchar *)&settings.ddr3,
return draco_read_nand_geometry();
}
-static void board_init_ddr(void)
+void draco_init_ddr(void)
{
struct emif_regs draco_ddr3_emif_reg_data = {
.zq_config = 0x50074BE4,
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
}
-static void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
{
return;
}
);
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-
-#include "../common/board.c"
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * board.h
+ * Board definitions for draco products
*
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ * TI am335x specifics moved to ../common/board_am335x.h
*/
-#ifndef _BOARD_H_
-#define _BOARD_H_
+#ifndef _BOARD_DRACO_H_
+#define _BOARD_DRACO_H_
#define PARGS(x) #x , /* Parameter Name */ \
settings.ddr3.x, /* EEPROM Value */ \
struct chip_data chip;
};
-/*
- * We have three pin mux functions that must exist. We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_uart1_pin_mux(void);
-void enable_uart2_pin_mux(void);
-void enable_uart3_pin_mux(void);
-void enable_uart4_pin_mux(void);
-void enable_uart5_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-
-/* Forwared declaration, defined in common board.c */
-void set_env_gpios(unsigned char state);
-#endif
+#endif /* _BOARD_DRACO_H_ */
PXM2 BOARD
-M: Samuel Egli <samuel.egli@siemens.com>
+M: Enrico Leto <enrico.leto@siemens.com>
S: Maintained
F: board/siemens/pxm2/
F: include/configs/pxm2.h
endif
obj-y += board.o
+obj-y += ../common/board_am335x.o
obj-y += ../common/eeprom.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
#include <miiphy.h>
#include <cpsw.h>
#include <watchdog.h>
-#include "board.h"
+#include "../common/board_am335x.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
#include "pmic.h"
#include <bmp_layout.h>
#ifdef CONFIG_SPL_BUILD
-static void board_init_ddr(void)
+void draco_init_ddr(void)
{
struct emif_regs pxm2_ddr3_emif_reg_data = {
.sdram_config = 0x41805332,
const struct dpll_params dpll_mpu_pxm2 = {
720, OSC-1, 1, -1, -1, -1, -1};
-void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
{
uchar buf[4];
/*
}
}
-int read_eeprom(void)
+int draco_read_eeprom(void)
{
/* nothing ToDo here for this board */
return 0;
}
#endif
-
-#include "../common/board.c"
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
RUT BOARD
-M: Samuel Egli <samuel.egli@siemens.com>
+M: Enrico Leto <enrico.leto@siemens.com>
S: Maintained
F: board/siemens/rut/
F: include/configs/rut.h
endif
obj-y += board.o
+obj-y += ../common/board_am335x.o
obj-y += ../common/eeprom.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
#include <video.h>
#include <watchdog.h>
#include <linux/delay.h>
-#include "board.h"
+#include "../common/board_am335x.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(void)
+int draco_read_eeprom(void)
{
return 0;
}
-static void board_init_ddr(void)
+void draco_init_ddr(void)
{
struct emif_regs rut_ddr3_emif_reg_data = {
.sdram_config = 0x61C04AB2,
#define REQUEST_AND_PULSE_RESET(N) \
request_and_pulse_reset(N, #N);
-static void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
{
REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
return 0;
}
#endif
-
-#include "../common/board.c"
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
projects / platform / kernel / u-boot.git / commitdiff