[libata] sata_mv: clean up DMA boundary issues, turn on 64-bit DMA
authorJeff Garzik <jeff@garzik.org>
Mon, 26 Feb 2007 06:26:06 +0000 (01:26 -0500)
committerJeff Garzik <jeff@garzik.org>
Sat, 28 Apr 2007 18:15:55 +0000 (14:15 -0400)
The chips covered by sata_mv have a 32-bit DMA boundary they must not
cross, not a 64K boundary.  We are merely limited to a 64K maximum
segment size.  Therefore, the DMA scatter/gather table fill code can be
greatly simplified, and we need not cut in half the S/G table size as
reported to the SCSI layer.

Also, the driver forget to turn on 64-bit DMA at the PCI layer.  All
other data structures (both hardware and software) have been prepped for
64-bit PCI DMA.  It was simply never turned on.  <fingers crossed> let's
see if it still works...

Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/sata_mv.c

index 5f3d524..7b73c73 100644 (file)
@@ -253,10 +253,7 @@ enum {
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
-       /* Our DMA boundary is determined by an ePRD being unable to handle
-        * anything larger than 64KB
-        */
-       MV_DMA_BOUNDARY         = 0xffffU,
+       MV_DMA_BOUNDARY         = 0xffffffffU,
 
        EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
 
@@ -384,10 +381,10 @@ static struct scsi_host_template mv_sht = {
        .queuecommand           = ata_scsi_queuecmd,
        .can_queue              = MV_USE_Q_DEPTH,
        .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = MV_MAX_SG_CT / 2,
+       .sg_tablesize           = MV_MAX_SG_CT,
        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
        .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
+       .use_clustering         = 1,
        .proc_name              = DRV_NAME,
        .dma_boundary           = MV_DMA_BOUNDARY,
        .slave_configure        = ata_scsi_slave_config,
@@ -585,6 +582,39 @@ static const struct mv_hw_ops mv6xxx_ops = {
 static int msi;              /* Use PCI msi; either zero (off, default) or non-zero */
 
 
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+       int rc;
+
+       if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+               rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+               if (rc) {
+                       rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+                       if (rc) {
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                          "64-bit DMA enable failed\n");
+                               return rc;
+                       }
+               }
+       } else {
+               rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit DMA enable failed\n");
+                       return rc;
+               }
+               rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit consistent DMA enable failed\n");
+                       return rc;
+               }
+       }
+
+       return rc;
+}
+
 /*
  * Functions
  */
@@ -957,38 +987,30 @@ static void mv_port_stop(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_fill_sg(struct ata_queued_cmd *qc)
+static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
 {
        struct mv_port_priv *pp = qc->ap->private_data;
-       unsigned int i = 0;
+       unsigned int n_sg = 0;
        struct scatterlist *sg;
+       struct mv_sg *mv_sg;
 
+       mv_sg = pp->sg_tbl;
        ata_for_each_sg(sg, qc) {
-               dma_addr_t addr;
-               u32 sg_len, len, offset;
-
-               addr = sg_dma_address(sg);
-               sg_len = sg_dma_len(sg);
-
-               while (sg_len) {
-                       offset = addr & MV_DMA_BOUNDARY;
-                       len = sg_len;
-                       if ((offset + sg_len) > 0x10000)
-                               len = 0x10000 - offset;
-
-                       pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
-                       pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
-                       pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
+               dma_addr_t addr = sg_dma_address(sg);
+               u32 sg_len = sg_dma_len(sg);
 
-                       sg_len -= len;
-                       addr += len;
+               mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+               mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+               mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
 
-                       if (!sg_len && ata_sg_is_last(sg, qc))
-                               pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+               if (ata_sg_is_last(sg, qc))
+                       mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
 
-                       i++;
-               }
+               mv_sg++;
+               n_sg++;
        }
+
+       return n_sg;
 }
 
 static inline unsigned mv_inc_q_index(unsigned index)
@@ -2327,6 +2349,10 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        if (rc)
                return rc;
 
+       rc = pci_go_64(pdev);
+       if (rc)
+               return rc;
+
        probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
        if (probe_ent == NULL)
                return -ENOMEM;