CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK);
}
-unsigned int cm_get_noc_clk_hz(void)
-{
- unsigned int clk_src, divisor, nocclk, src_hz;
-
- nocclk = readl(&clock_manager_base->main_pll.nocclk);
- clk_src = (nocclk >> CLKMGR_MAINPLL_NOCCLK_SRC_LSB) &
- CLKMGR_MAINPLL_NOCCLK_SRC_MSK;
-
- divisor = 1 + (nocclk & CLKMGR_MAINPLL_NOCDIV_MSK);
-
- if (clk_src == CLKMGR_PERPLLGRP_SRC_MAIN) {
- src_hz = cm_get_main_vco_clk_hz();
- src_hz /= 1 +
- (readl(SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET) &
- CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
- } else if (clk_src == CLKMGR_PERPLLGRP_SRC_PERI) {
- src_hz = cm_get_per_vco_clk_hz();
- src_hz /= 1 +
- ((readl(SOCFPGA_CLKMGR_ADDRESS +
- CLKMGR_MAINPLL_NOC_CLK_OFFSET) >>
- CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
- CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
- } else if (clk_src == CLKMGR_PERPLLGRP_SRC_OSC1) {
- src_hz = eosc1_hz;
- } else if (clk_src == CLKMGR_PERPLLGRP_SRC_INTOSC) {
- src_hz = cb_intosc_hz;
- } else if (clk_src == CLKMGR_PERPLLGRP_SRC_FPGA) {
- src_hz = f2s_free_hz;
- } else {
- src_hz = 0;
- }
-
- return src_hz / divisor;
-}
-
-unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift)
-{
- unsigned int divisor2 = 1 <<
- ((readl(&clock_manager_base->main_pll.nocdiv) >>
- nocdivshift) & CLKMGR_MAINPLL_NOCDIV_MSK);
-
- return cm_get_noc_clk_hz() / divisor2;
-}
-
int cm_basic_init(const void *blob)
{
struct mainpll_cfg main_cfg;
return cm_full_cfg(&main_cfg, &per_cfg);
}
-unsigned long cm_get_mpu_clk_hz(void)
+static u32 cm_get_rate_dm(char *name)
{
- u32 reg, clk_hz;
- u32 clk_src, mainmpuclk_reg;
-
- mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk);
-
- clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) &
- CLKMGR_MAINPLL_MPUCLK_SRC_MSK;
-
- reg = readl(&clock_manager_base->altera.mpuclk);
- /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
- switch (clk_src) {
- case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
- clk_hz = cm_get_main_vco_clk_hz();
- clk_hz /= (reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
- break;
- case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
- clk_hz = cm_get_per_vco_clk_hz();
- clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
- CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
- break;
- case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
- clk_hz = eosc1_hz;
- break;
- case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
- clk_hz = cb_intosc_hz;
- break;
- case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
- clk_hz = f2s_free_hz;
- break;
- default:
- printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src);
+ struct uclass *uc;
+ struct udevice *dev = NULL;
+ struct clk clk = { 0 };
+ ulong rate;
+ int ret;
+
+ /* Device addresses start at 1 */
+ ret = uclass_get(UCLASS_CLK, &uc);
+ if (ret)
return 0;
- }
-
- clk_hz /= (mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
-
- return clk_hz;
-}
-unsigned int cm_get_per_vco_clk_hz(void)
-{
- u32 src_hz = 0;
- u32 clk_src = 0;
- u32 numer = 0;
- u32 denom = 0;
- u32 vco = 0;
-
- clk_src = readl(&clock_manager_base->per_pll.vco0);
-
- clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) &
- CLKMGR_PERPLL_VCO0_PSRC_MSK;
-
- if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) {
- src_hz = eosc1_hz;
- } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) {
- src_hz = cb_intosc_hz;
- } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) {
- src_hz = f2s_free_hz;
- } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) {
- src_hz = cm_get_main_vco_clk_hz();
- src_hz /= (readl(&clock_manager_base->main_pll.cntr15clk) &
- CLKMGR_MAINPLL_CNTRCLK_MSK) + 1;
- } else {
- printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src);
+ ret = uclass_get_device_by_name(UCLASS_CLK, name, &dev);
+ if (ret)
return 0;
- }
- vco = readl(&clock_manager_base->per_pll.vco1);
-
- numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK;
-
- denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) &
- CLKMGR_PERPLL_VCO1_DENOM_MSK;
-
- vco = src_hz;
- vco /= 1 + denom;
- vco *= 1 + numer;
-
- return vco;
-}
-
-unsigned int cm_get_main_vco_clk_hz(void)
-{
- u32 src_hz, numer, denom, vco;
-
- u32 clk_src = readl(&clock_manager_base->main_pll.vco0);
-
- clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) &
- CLKMGR_MAINPLL_VCO0_PSRC_MSK;
-
- if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) {
- src_hz = eosc1_hz;
- } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) {
- src_hz = cb_intosc_hz;
- } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) {
- src_hz = f2s_free_hz;
- } else {
- printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src);
+ ret = device_probe(dev);
+ if (ret)
return 0;
- }
-
- vco = readl(&clock_manager_base->main_pll.vco1);
-
- numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK;
- denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) &
- CLKMGR_MAINPLL_VCO1_DENOM_MSK;
+ ret = clk_request(dev, &clk);
+ if (ret)
+ return 0;
- vco = src_hz;
- vco /= 1 + denom;
- vco *= 1 + numer;
+ rate = clk_get_rate(&clk);
- return vco;
-}
+ clk_free(&clk);
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
- return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB);
+ return rate;
}
-unsigned int cm_get_mmc_controller_clk_hz(void)
+static u32 cm_get_rate_dm_khz(char *name)
{
- u32 clk_hz = 0;
- u32 clk_input = 0;
-
- clk_input = readl(&clock_manager_base->per_pll.cntr6clk);
- clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) &
- CLKMGR_PERPLLGRP_SRC_MSK;
-
- switch (clk_input) {
- case CLKMGR_PERPLLGRP_SRC_MAIN:
- clk_hz = cm_get_main_vco_clk_hz();
- clk_hz /= 1 + (readl(&clock_manager_base->main_pll.cntr6clk) &
- CLKMGR_MAINPLL_CNTRCLK_MSK);
- break;
-
- case CLKMGR_PERPLLGRP_SRC_PERI:
- clk_hz = cm_get_per_vco_clk_hz();
- clk_hz /= 1 + (readl(&clock_manager_base->per_pll.cntr6clk) &
- CLKMGR_PERPLL_CNTRCLK_MSK);
- break;
-
- case CLKMGR_PERPLLGRP_SRC_OSC1:
- clk_hz = eosc1_hz;
- break;
-
- case CLKMGR_PERPLLGRP_SRC_INTOSC:
- clk_hz = cb_intosc_hz;
- break;
-
- case CLKMGR_PERPLLGRP_SRC_FPGA:
- clk_hz = f2s_free_hz;
- break;
- }
-
- return clk_hz / 4;
+ return cm_get_rate_dm(name) / 1000;
}
-unsigned int cm_get_spi_controller_clk_hz(void)
+unsigned long cm_get_mpu_clk_hz(void)
{
- return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+ return cm_get_rate_dm("main_mpu_base_clk");
}
unsigned int cm_get_qspi_controller_clk_hz(void)
{
- return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+ return cm_get_rate_dm("qspi_clk");
}
-/* Override weak dw_spi_get_clk implementation in designware_spi.c driver */
-int dw_spi_get_clk(struct udevice *bus, ulong *rate)
+unsigned int cm_get_l4_sp_clk_hz(void)
{
- *rate = cm_get_spi_controller_clk_hz();
-
- return 0;
+ return cm_get_rate_dm("l4_sp_clk");
}
void cm_print_clock_quick_summary(void)
{
- printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
- printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
- printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
- printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
- printf("EOSC1 %8d kHz\n", eosc1_hz / 1000);
- printf("cb_intosc %8d kHz\n", cb_intosc_hz / 1000);
- printf("f2s_free %8d kHz\n", f2s_free_hz / 1000);
- printf("Main VCO %8d kHz\n", cm_get_main_vco_clk_hz() / 1000);
- printf("NOC %8d kHz\n", cm_get_noc_clk_hz() / 1000);
- printf("L4 Main %8d kHz\n",
- cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB) / 1000);
- printf("L4 MP %8d kHz\n",
- cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) / 1000);
- printf("L4 SP %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
- printf("L4 sys free %8d kHz\n", cm_get_noc_clk_hz() / 4000);
+ printf("MPU %10d kHz\n", cm_get_rate_dm_khz("main_mpu_base_clk"));
+ printf("MMC %8d kHz\n", cm_get_rate_dm_khz("sdmmc_clk"));
+ printf("QSPI %8d kHz\n", cm_get_rate_dm_khz("qspi_clk"));
+ printf("SPI %8d kHz\n", cm_get_rate_dm_khz("spi_m_clk"));
+ printf("EOSC1 %8d kHz\n", cm_get_rate_dm_khz("osc1"));
+ printf("cb_intosc %8d kHz\n", cm_get_rate_dm_khz("cb_intosc_ls_clk"));
+ printf("f2s_free %8d kHz\n", cm_get_rate_dm_khz("f2s_free_clk"));
+ printf("Main VCO %8d kHz\n", cm_get_rate_dm_khz("main_pll@40"));
+ printf("NOC %8d kHz\n", cm_get_rate_dm_khz("main_noc_base_clk"));
+ printf("L4 Main %8d kHz\n", cm_get_rate_dm_khz("l4_main_clk"));
+ printf("L4 MP %8d kHz\n", cm_get_rate_dm_khz("l4_mp_clk"));
+ printf("L4 SP %8d kHz\n", cm_get_rate_dm_khz("l4_sp_clk"));
+ printf("L4 sys free %8d kHz\n", cm_get_rate_dm_khz("l4_sys_free_clk"));
}
projects / platform / kernel / u-boot.git / commitdiff