+++ /dev/null
-/*
- * bluetooth-frwk
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#ifndef _BLUETOOTH_API_H_
-#define _BLUETOOTH_API_H_
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <glib.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup BLUETOOTHFW BluetoothFW
- *
- * A base library for bluetooth framework
- *
- * @addtogroup BLUETOOTHFW
- * @{
- */
-
-#define BLUETOOTH_ADDRESS_LENGTH 6 /**< This specifies bluetooth device address length */
-#define BLUETOOTH_INTERFACE_NAME_LENGTH 16
-#define BLUETOOTH_DEVICE_NAME_LENGTH_MAX 248 /**< This specifies maximum device name length */
-
-#define BLUETOOTH_MAX_SERVICES_FOR_DEVICE 40 /**< This specifies maximum number of services
- a device can support */
-
-#define BLUETOOTH_UUID_STRING_MAX 50
-
-#define BLUETOOTH_OOB_DATA_LENGTH 16
-/**
- * This is Bluetooth Connected event role
- */
-#define RFCOMM_ROLE_SERVER 1
-#define RFCOMM_ROLE_CLIENT 2
-
-/**
- * This is Bluetooth error code
- */
-#define BLUETOOTH_ERROR_BASE ((int)0) /**< Error code base */
-
-#define BLUETOOTH_ERROR_NONE ((int)0) /**< No error #0 */
-#define BLUETOOTH_ERROR_CANCEL ((int)BLUETOOTH_ERROR_BASE - 0x01)
- /**< cancelled */
-#define BLUETOOTH_ERROR_INVALID_CALLBACK ((int)BLUETOOTH_ERROR_BASE - 0x02)
- /**< Callback error */
-#define BLUETOOTH_ERROR_INVALID_PARAM ((int)BLUETOOTH_ERROR_BASE - 0x03)
- /**< invalid paramerror */
-#define BLUETOOTH_ERROR_INVALID_DATA ((int)BLUETOOTH_ERROR_BASE - 0x04)
- /**< invalid data error */
-#define BLUETOOTH_ERROR_MEMORY_ALLOCATION ((int)BLUETOOTH_ERROR_BASE - 0x05)
- /**< Memory allocation error */
-#define BLUETOOTH_ERROR_OUT_OF_MEMORY ((int)BLUETOOTH_ERROR_BASE - 0x06)
- /**< out of memory error */
-#define BLUETOOTH_ERROR_TIMEOUT ((int)BLUETOOTH_ERROR_BASE - 0x07)
- /**< timeout error */
-#define BLUETOOTH_ERROR_NO_RESOURCES ((int)BLUETOOTH_ERROR_BASE - 0x08)
- /**< No resource error */
-#define BLUETOOTH_ERROR_INTERNAL ((int)BLUETOOTH_ERROR_BASE - 0x09)
- /**< internal error */
-#define BLUETOOTH_ERROR_NOT_SUPPORT ((int)BLUETOOTH_ERROR_BASE - 0x0a)
- /**< Not supported error */
-#define BLUETOOTH_ERROR_DEVICE_NOT_ENABLED ((int)BLUETOOTH_ERROR_BASE - 0x0b)
- /**< Operation is failed because
- of not enabled BT Adapter */
-#define BLUETOOTH_ERROR_DEVICE_ALREADY_ENABLED ((int)BLUETOOTH_ERROR_BASE - 0x0c)
- /**< Enabling is failed because of
- already enabled BT Adapter */
-#define BLUETOOTH_ERROR_DEVICE_BUSY ((int)BLUETOOTH_ERROR_BASE - 0x0d)
- /**< Operation is failed because of
- other on going operation */
-#define BLUETOOTH_ERROR_ACCESS_DENIED ((int)BLUETOOTH_ERROR_BASE - 0x0e)
- /**< access denied error */
-#define BLUETOOTH_ERROR_MAX_CLIENT ((int)BLUETOOTH_ERROR_BASE - 0x0f)
- /**< max client error */
-#define BLUETOOTH_ERROR_NOT_FOUND ((int)BLUETOOTH_ERROR_BASE - 0x10)
- /**< not found error */
-#define BLUETOOTH_ERROR_SERVICE_SEARCH_ERROR ((int)BLUETOOTH_ERROR_BASE - 0x11)
- /**< service search fail */
-#define BLUETOOTH_ERROR_PARING_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x12)
- /**< pairing failed error */
-#define BLUETOOTH_ERROR_NOT_PAIRED ((int)BLUETOOTH_ERROR_BASE - 0x13)
- /**< Not paired error */
-#define BLUETOOTH_ERROR_SERVICE_NOT_FOUND ((int)BLUETOOTH_ERROR_BASE - 0x14)
- /**< no service error */
-#define BLUETOOTH_ERROR_NOT_CONNECTED ((int)BLUETOOTH_ERROR_BASE - 0x15)
- /**< no connection error */
-#define BLUETOOTH_ERROR_ALREADY_CONNECT ((int)BLUETOOTH_ERROR_BASE - 0x16)
- /**< alread connected error */
-#define BLUETOOTH_ERROR_CONNECTION_BUSY ((int)BLUETOOTH_ERROR_BASE - 0x17)
- /**< connection busy error */
-#define BLUETOOTH_ERROR_CONNECTION_ERROR ((int)BLUETOOTH_ERROR_BASE - 0x18)
- /**< connection error */
-#define BLUETOOTH_ERROR_MAX_CONNECTION ((int)BLUETOOTH_ERROR_BASE - 0x19)
- /**< max connection error*/
-#define BLUETOOTH_ERROR_NOT_IN_OPERATION ((int)BLUETOOTH_ERROR_BASE - 0x1a)
- /**< Not in operation */
-#define BLUETOOTH_ERROR_CANCEL_BY_USER ((int)BLUETOOTH_ERROR_BASE - 0x1b)
- /**< Cancelled by user */
-#define BLUETOOTH_ERROR_REGISTRATION_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x1c)
- /**< Service record registration failed */
-#define BLUETOOTH_ERROR_IN_PROGRESS ((int)BLUETOOTH_ERROR_BASE - 0x1d)
- /**< Operation in progress */
-#define BLUETOOTH_ERROR_AUTHENTICATION_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x1e)
- /**< authentication failed error when paring*/
-#define BLUETOOTH_ERROR_HOST_DOWN ((int)BLUETOOTH_ERROR_BASE - 0x1f)
- /**< Remote host is down */
-#define BLUETOOTH_ERROR_END_OF_DEVICE_LIST ((int)BLUETOOTH_ERROR_BASE - 0x20)
- /**< End of device list */
-
-#define BLUETOOTH_ERROR_AGENT_ALREADY_EXIST ((int)BLUETOOTH_ERROR_BASE - 0x21)
- /**< Obex agent already exists */
-#define BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST ((int)BLUETOOTH_ERROR_BASE - 0x22)
- /**< Obex agent does not exist */
-
-#define BLUETOOTH_ERROR_ALREADY_INITIALIZED ((int)BLUETOOTH_ERROR_BASE - 0x23)
- /**< Already initialized */
-
-
-/**
- * This is Bluetooth device address type, fixed to 6 bytes ##:##:##:##:##:##
- */
-typedef struct {
- unsigned char addr[BLUETOOTH_ADDRESS_LENGTH];
-} bluetooth_device_address_t;
-
-/**
- * This is Bluetooth device name type, maximum size of Bluetooth device name is 248 bytes
- */
-typedef struct {
- char name[BLUETOOTH_DEVICE_NAME_LENGTH_MAX + 1];
-} bluetooth_device_name_t;
-
-/**
- * Adapter state
- */
-typedef enum {
- BLUETOOTH_ADAPTER_DISABLED, /**< Bluetooth adapter is disabled */
- BLUETOOTH_ADAPTER_ENABLED, /**< Bluetooth adapter is enabled */
- BLUETOOTH_ADAPTER_CHANGING_ENABLE, /**< Bluetooth adapter is currently enabling */
- BLUETOOTH_ADAPTER_CHANGING_DISABLE, /**< Bluetooth adapter is currently disabling */
-} bluetooth_adapter_state_t;
-
-/**
- * Discoverable mode
- */
-typedef enum {
- BLUETOOTH_DISCOVERABLE_MODE_CONNECTABLE, /**< Non discoverable mode */
- /*Changed the order to make it compatable with old method */
- BLUETOOTH_DISCOVERABLE_MODE_GENERAL_DISCOVERABLE,/**< Discoverable mode */
- BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE,
- /**< Discoverable mode with time limit
- After specific timeout, it is changed
- to non discoverable mode */
-} bluetooth_discoverable_mode_t;
-
-/**
- * Network connect mode
- */
-typedef enum {
- BLUETOOTH_NETWORK_PANU_ROLE,
- /**< PAN user */
- BLUETOOTH_NETWORK_NAP_ROLE,/**< Network Access Point */
- BLUETOOTH_NETWORK_GN_ROLE, /**< Group ad-hoc Network */
- BLUETOOTH_NETWORK_CUSTOM_UUID, /**< Custom role */
-} bluetooth_network_role_t;
-
-/**
- * Service type
- */
-typedef enum {
- BLUETOOTH_RFCOMM_SERVICE = 0x01,
- BLUETOOTH_A2DP_SERVICE = 0x02,
- BLUETOOTH_HSP_SERVICE = 0x04,
- BLUETOOTH_HID_SERVICE = 0x08,
-} bluetooth_service_type_t;
-
-#define BLUETOOTH_EVENT_BASE ((int)(0x0000)) /**< No event */
-#define BLUETOOTH_EVENT_GAP_BASE ((int)(BLUETOOTH_EVENT_BASE + 0x0010))
- /**< Base ID for GAP Event */
-#define BLUETOOTH_EVENT_SDP_BASE ((int)(BLUETOOTH_EVENT_GAP_BASE + 0x0020))
- /**< Base ID for SDP events */
-#define BLUETOOTH_EVENT_RFCOMM_BASE ((int)(BLUETOOTH_EVENT_SDP_BASE + 0x0020))
- /**< Base ID for RFCOMM events */
-#define BLUETOOTH_EVENT_NETWORK_BASE ((int)(BLUETOOTH_EVENT_RFCOMM_BASE + 0x0020))
- /**< Base ID for NETWORK events */
-#define BLUETOOTH_EVENT_HDP_BASE ((int)(BLUETOOTH_EVENT_NETWORK_BASE + 0x0020))
- /**< Base ID for HDP events */
-#define BLUETOOTH_EVENT_OPC_BASE ((int)(BLUETOOTH_EVENT_HDP_BASE + 0x0020))
- /**< Base ID for OPC events */
-#define BLUETOOTH_EVENT_OBEX_SERVER_BASE ((int)(BLUETOOTH_EVENT_OPC_BASE + 0x0020))
- /**< Base ID for Obex Server events */
-#define BLUETOOTH_EVENT_GATT_BASE ((int)(BLUETOOTH_EVENT_OBEX_SERVER_BASE + 0x0020))
- /**< Base ID for GATT events */
-
-#define BLUETOOTH_EVENT_AUDIO_BASE ((int)(BLUETOOTH_EVENT_GATT_BASE + 0x0020))
- /**< Base ID for Audio events */
-#define BLUETOOTH_EVENT_HID_BASE ((int)(BLUETOOTH_EVENT_AUDIO_BASE + 0x0020))
- /**< Base ID for HID events */
-
-/**
- * Bluetooth event type
- */
-typedef enum {
- BLUETOOTH_EVENT_NONE = BLUETOOTH_EVENT_BASE,/**< No event */
-
- BLUETOOTH_EVENT_ENABLED, /**< Bluetooth event adpater enabled */
- BLUETOOTH_EVENT_DISABLED, /**< Bluetooth event adpater disabled */
- BLUETOOTH_EVENT_LOCAL_NAME_CHANGED, /**< Bluetooth event local name changed*/
- BLUETOOTH_EVENT_DISCOVERABLE_TIMEOUT_REQUESTED,
- /**< Bluetooth event Discoverable timeout requested*/
- BLUETOOTH_EVENT_DISCOVERABLE_MODE_CHANGED, /**< Bluetooth event mode changed */
- BLUETOOTH_EVENT_DISCOVERY_OPTION_REQUESTED, /**< Bluetooth event discovery option */
- BLUETOOTH_EVENT_DISCOVERY_STARTED, /**< Bluetooth event discovery started */
- BLUETOOTH_EVENT_DISCOVERY_FINISHED, /**< Bluetooth event discovery finished */
-
- BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND, /**< Bluetooth event remote deice found */
- BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED,/**< Bluetooth event remote device name updated*/
- BLUETOOTH_EVENT_BONDING_FINISHED, /**< Bluetooth event bonding completed */
- BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED, /**< Bluetooth event bonding removed */
- BLUETOOTH_EVENT_BONDED_DEVICE_FOUND, /**< Bluetooth event paired device found */
- BLUETOOTH_EVENT_REMOTE_DEVICE_READ, /**< Bluetooth event read remote device */
- BLUETOOTH_EVENT_DEVICE_AUTHORIZED, /**< Bluetooth event authorize device */
- BLUETOOTH_EVENT_DEVICE_UNAUTHORIZED, /**< Bluetooth event unauthorize device */
- BLUETOOTH_EVENT_DISCOVERABLE_TIMEOUT_CHANGED, /**< Bluetooth event mode changed */
-
- BLUETOOTH_EVENT_SERVICE_SEARCHED = BLUETOOTH_EVENT_SDP_BASE,
- /**< Bluetooth event serice search base id */
- BLUETOOTH_EVENT_SERVICE_SEARCH_CANCELLED, /**< Bluetooth event service search cancelled */
- BLUETOOTH_EVENT_RFCOMM_DATA_RECEIVED = BLUETOOTH_EVENT_RFCOMM_BASE,
- /**< RFCOMM data receive event */
- BLUETOOTH_EVENT_RFCOMM_CONNECTED, /**< Rfcomm server incomming connection */
- BLUETOOTH_EVENT_RFCOMM_DISCONNECTED, /**< Rfcomm server/client disconnect */
-
- BLUETOOTH_EVENT_RFCOMM_AUTHORIZE,
-
- BLUETOOTH_EVENT_DEVICE_CONNECTED, /**< Bluetooth event device connected */
- BLUETOOTH_EVENT_DEVICE_DISCONNECTED, /**< Bluetooth event device disconnected */
-
- BLUETOOTH_EVENT_RFCOMM_SERVER_REMOVED,
-
- BLUETOOTH_EVENT_NETWORK_SERVER_ACTIVATED = BLUETOOTH_EVENT_NETWORK_BASE,
- /**< Bluetooth Network event */
- BLUETOOTH_EVENT_NETWORK_SERVER_DEACTIVATED, /**< Network server deactivated */
- BLUETOOTH_EVENT_NETWORK_SERVER_CONNECTED, /**< Network connected event in server */
- BLUETOOTH_EVENT_NETWORK_SERVER_DISCONNECTED,
- /**< Network disconnected evnet in server */
-
- BLUETOOTH_EVENT_NETWORK_CONNECTED, /**< Network connected event in client*/
- BLUETOOTH_EVENT_NETWORK_DISCONNECTED, /**< Network disconnected evnet in client*/
-
- BLUETOOTH_EVENT_HDP_CONNECTED
- = BLUETOOTH_EVENT_HDP_BASE, /**<HDP Connect>*/
- BLUETOOTH_EVENT_HDP_DISCONNECTED, /**<HDP Disconnect>*/
- BLUETOOTH_EVENT_HDP_DATA_RECEIVED, /**<HDP Data Indication>*/
-
- BLUETOOTH_EVENT_OPC_CONNECTED = BLUETOOTH_EVENT_OPC_BASE,
- /* OPC Connected event */
- BLUETOOTH_EVENT_OPC_DISCONNECTED, /* OPC Disonnected event */
- BLUETOOTH_EVENT_OPC_TRANSFER_STARTED, /* OPC Transfer started event */
- BLUETOOTH_EVENT_OPC_TRANSFER_PROGRESS, /* OPC Transfer progress event */
- BLUETOOTH_EVENT_OPC_TRANSFER_COMPLETE, /* OPC Transfer Complete event */
-
- BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE = BLUETOOTH_EVENT_OBEX_SERVER_BASE,
- /* Obex server authorize event*/
- BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_STARTED, /* Obex Server transfer started event*/
- BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_PROGRESS,/* Obex Server transfer progress event*/
- BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_COMPLETED,/* Obex Server transfer complete event*/
- BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE,
-
- BLUETOOTH_EVENT_GATT_SVC_CHAR_DISCOVERED = BLUETOOTH_EVENT_GATT_BASE,
- /**<Discovered GATT service characteristics event*/
- BLUETOOTH_EVENT_GATT_CHAR_VAL_CHANGED,
- /**<Remote GATT charateristic value changed event*/
- BLUETOOTH_EVENT_GATT_GET_CHAR_FROM_UUID,
-
- BLUETOOTH_EVENT_AG_CONNECTED = BLUETOOTH_EVENT_AUDIO_BASE, /**<AG service connected event*/
- BLUETOOTH_EVENT_AG_DISCONNECTED, /**<AG service disconnected event*/
- BLUETOOTH_EVENT_AG_SPEAKER_GAIN, /**<Speaker gain request event*/
- BLUETOOTH_EVENT_AG_MIC_GAIN, /**<Mic gain request event*/
- BLUETOOTH_EVENT_AG_AUDIO_CONNECTED, /**<AV & AG service connected event*/
- BLUETOOTH_EVENT_AG_AUDIO_DISCONNECTED, /**<AV & AG service disconnected event*/
- BLUETOOTH_EVENT_AV_CONNECTED, /**<AV service connected event*/
- BLUETOOTH_EVENT_AV_DISCONNECTED, /**<AV service disconnected event*/
- BLUETOOTH_EVENT_AVRCP_CONNECTED, /**<AVRCP service connected event*/
- BLUETOOTH_EVENT_AVRCP_DISCONNECTED, /**<AVRCP service disconnected event*/
- BLUETOOTH_EVENT_AVRCP_SETTING_SHUFFLE_STATUS, /**<AVRCP service player suffle status event*/
- BLUETOOTH_EVENT_AVRCP_SETTING_EQUALIZER_STATUS, /**<AVRCP service player equalizer status event*/
- BLUETOOTH_EVENT_AVRCP_SETTING_REPEAT_STATUS, /**<AVRCP service player repeat status event*/
- BLUETOOTH_EVENT_AVRCP_SETTING_SCAN_STATUS, /**<AVRCP service player scan status event*/
-
- BLUETOOTH_HID_CONNECTED = BLUETOOTH_EVENT_HID_BASE, /**< Input connectd event*/
- BLUETOOTH_HID_DISCONNECTED, /**< Input disconnectd event*/
- BLUETOOTH_EVENT_MAX, /**< Bluetooth event Max value */
-} bluetooth_event_type_t;
-
- /**
- * This bt_service_uuid_list_t enum indicates service uuid list .
- * This values is stored the service_list_array in bt_sdp_info_t and bluetooth_device_info_t.
- */
-
-typedef enum {
- BLUETOOTH_SPP_PROFILE_UUID = ((unsigned short)0x1101), /**<SPP*/
- BLUETOOTH_LAP_PROFILE_UUID = ((unsigned short)0x1102), /**<LAP*/
- BLUETOOTH_DUN_PROFILE_UUID = ((unsigned short)0x1103), /**<DUN*/
- BLUETOOTH_OBEX_IR_MC_SYNC_SERVICE_UUID = ((unsigned short)0x1104), /**<OBEX IR MC SYNC*/
- BLUETOOTH_OBEX_OBJECT_PUSH_SERVICE_UUID = ((unsigned short)0x1105), /**<OPP*/
- BLUETOOTH_OBEX_FILE_TRANSFER_UUID = ((unsigned short)0x1106), /**<FTP*/
- BLUETOOTH_IRMC_SYNC_COMMAND_UUID = ((unsigned short)0x1107), /**<IRMC SYNC COMMAND*/
- BLUETOOTH_HS_PROFILE_UUID = ((unsigned short)0x1108), /**<HS*/
- BLUETOOTH_CTP_PROFILE_UUID = ((unsigned short)0x1109), /**<CTP*/
- BLUETOOTH_AUDIO_SOURCE_UUID = ((unsigned short)0x110A), /**<AUDIO SOURCE*/
- BLUETOOTH_AUDIO_SINK_UUID = ((unsigned short)0x110B), /**<AUDIO SINK*/
- BLUETOOTH_AV_REMOTE_CONTROL_TARGET_UUID = ((unsigned short)0x110C), /**<AV REMOTE CONTROL
- TARGET*/
- BLUETOOTH_ADVANCED_AUDIO_PROFILE_UUID = ((unsigned short)0x110D), /**<A2DP*/
- BLUETOOTH_AV_REMOTE_CONTROL_UUID = ((unsigned short)0x110E), /**<AV REMOTE CONTROL UUID*/
- BLUETOOTH_AV_REMOTE_CONTROL_CONTROLLER_UUID = ((unsigned short)0x110F), /**<AV REMOTE CONTROLLER UUID*/
- BLUETOOTH_ICP_PROFILE_UUID = ((unsigned short)0x1110), /**<ICP*/
- BLUETOOTH_FAX_PROFILE_UUID = ((unsigned short)0x1111), /**<FAX*/
- BLUETOOTH_HEADSET_AG_SERVICE_UUID = ((unsigned short)0x1112), /**<HS AG */
- BLUETOOTH_PAN_PANU_PROFILE_UUID = ((unsigned short)0x1115), /**<PAN*/
- BLUETOOTH_PAN_NAP_PROFILE_UUID = ((unsigned short)0x1116), /**<PAN*/
- BLUETOOTH_PAN_GN_PROFILE_UUID = ((unsigned short)0x1117), /**<PAN*/
- BLUETOOTH_DIRECT_PRINTING = ((unsigned short)0x1118),
- BLUETOOTH_OBEX_BPPS_PROFILE_UUID = ((unsigned short)0x1118), /**<OBEX BPPS*/ /* Will be removed */
- BLUETOOTH_REFERENCE_PRINTING = ((unsigned short)0x1119),
- BLUETOOTH_OBEX_IMAGING_UUID = ((unsigned short)0x111A), /**<OBEX_IMAGING*/
- BLUETOOTH_OBEX_IMAGING_RESPONDER_UUID = ((unsigned short)0x111B), /**<OBEX_IMAGING
- RESPONDER*/
- BLUETOOTH_IMAGING_AUTOMATIC_ARCHIVE_UUID = ((unsigned short)0x111C), /**<IMAGING AUTOMATIC ARCHIVE*/
- BLUETOOTH_IMAGING_REFERENCED_OBJECTS_UUID = ((unsigned short)0x111D), /**<IMAGING REFERENCED OBJECTS*/
- BLUETOOTH_HF_PROFILE_UUID = ((unsigned short)0x111E), /**<HF*/
- BLUETOOTH_HFG_PROFILE_UUID = ((unsigned short)0x111F), /**<HFG*/
- BLUETOOTH_DIRECT_PRINTING_REFERENCE_OBJ_UUID = ((unsigned short)0x1120),
- /**<DIRECT PRINTING*/
- BLUETOOTH_REFLECTED_UI = ((unsigned short)0x1121), /**<REFLECTED UI*/
- BLUETOOTH_BASIC_PRINTING = ((unsigned short)0x1122), /**<BASIC PRINTING*/
- BLUETOOTH_PRINTING_STATUS = ((unsigned short)0x1123), /**<PRINTING STATUS*/
- BLUETOOTH_OBEX_PRINTING_STATUS_UUID = ((unsigned short)0x1123), /**<OBEX PRINTING STATUS*/ /* Will be removed */
- BLUETOOTH_HID_PROFILE_UUID = ((unsigned short)0x1124), /**<HID*/
- BLUETOOTH_HCR_PROFILE_UUID = ((unsigned short)0x1125), /**<HCRP*/
- BLUETOOTH_HCR_PRINT_UUID = ((unsigned short)0x1126), /**<HCR PRINT*/
- BLUETOOTH_HCR_SCAN_UUID = ((unsigned short)0x1127), /**<HCR SCAN*/
- BLUETOOTH_SIM_ACCESS_PROFILE_UUID = ((unsigned short)0x112D), /**<SIM ACCESS PROFILE*/
- BLUETOOTH_PBAP_PCE_UUID = ((unsigned short)0x112E), /**<PBAP - PCE*/
- BLUETOOTH_PBAP_PSE_UUID = ((unsigned short)0x112F), /**<OBEX PBA*/
- BLUETOOTH_OBEX_PBA_PROFILE_UUID = ((unsigned short)0x112F), /**<OBEX PBA*/ /* Will be removed */
- BLUETOOTH_OBEX_PBAP_UUID = ((unsigned short)0x1130), /**<OBEX PBA*/
- BLUETOOTH_HEADSET_HS_UUID = ((unsigned short)0x1131), /**<HEADSET HS*/
- BLUETOOTH_MESSAGE_ACCESS_SERVER_UUID = ((unsigned short)0x1132),/**<MESSAGE ACCESS SERVER*/
- BLUETOOTH_MESSAGE_NOTIFICATION_SERVER_UUID = ((unsigned short)0x1133),/**<MESSAGE NOTIFICATION SERVER*/
- BLUETOOTH_MESSAGE_ACCESS_PROFILE_UUID = ((unsigned short)0x1134),/**<MESSAGE ACCESS PROFILE*/
- BLUETOOTH_PNP_INFORMATION_UUID = ((unsigned short)0x1200), /**<PNP*/
- BLUETOOTH_GENERIC_NETWORKING_UUID = ((unsigned short)0x1201), /**<GENERIC NETWORKING*/
- BLUETOOTH_GENERIC_FILE_TRANSFER_UUID = ((unsigned short)0x1202),/**<GENERIC FILE TRANSFER*/
- BLUETOOTH_GENERIC_AUDIO_UUID = ((unsigned short)0x1203), /**<GENERIC AUDIO*/
- BLUETOOTH_GENERIC_TELEPHONY_UUID = ((unsigned short)0x1204), /**<GENERIC TELEPHONY*/
- BLUETOOTH_VIDEO_SOURCE_UUID = ((unsigned short)0x1303), /**<VEDIO SOURCE*/
- BLUETOOTH_VIDEO_SINK_UUID = ((unsigned short)0x1304), /**<VEDIO SINK*/
- BLUETOOTH_VIDEO_DISTRIBUTION_UUID = ((unsigned short)0x1305), /**<VEDIO DISTRIBUTION*/
- BLUETOOTH_HDP_UUID = ((unsigned short)0x1400), /**<HDP*/
- BLUETOOTH_HDP_SOURCE_UUID = ((unsigned short)0x1401), /**<HDP SOURCE*/
- BLUETOOTH_HDP_SINK_UUID = ((unsigned short)0x1402), /**<HDP SINK*/
- BLUETOOTH_OBEX_SYNCML_TRANSFER_UUID = ((unsigned short)0x0000) /**<OBEX_SYNC*/ /* Will be removed */
-} bluetooth_service_uuid_list_t;
-
-/**
-* Service class part of class of device returned from device discovery
-*/
-typedef enum {
- BLUETOOTH_DEVICE_SERVICE_CLASS_LIMITED_DISCOVERABLE_MODE = 0x002000,
- BLUETOOTH_DEVICE_SERVICE_CLASS_POSITIONING = 0x010000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_NETWORKING = 0x020000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_RENDERING = 0x040000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_CAPTURING = 0x080000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_OBJECT_TRANSFER = 0x100000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_AUDIO = 0x200000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_TELEPHONY = 0x400000, /**< */
- BLUETOOTH_DEVICE_SERVICE_CLASS_INFORMATION = 0x800000, /**< */
-} bluetooth_device_service_class_t;
-
-
-/**
- * Major device mask (For device discovery)
- */
-typedef enum {
- BLUETOOTH_DEVICE_MAJOR_MASK_MISC = 0x00,
- BLUETOOTH_DEVICE_MAJOR_MASK_COMPUTER = 0x0001,
- BLUETOOTH_DEVICE_MAJOR_MASK_PHONE = 0x0002,
- BLUETOOTH_DEVICE_MAJOR_MASK_LAN_ACCESS_POINT = 0x0004,
- BLUETOOTH_DEVICE_MAJOR_MASK_AUDIO = 0x0008,
- BLUETOOTH_DEVICE_MAJOR_MASK_PERIPHERAL = 0x0010,
- BLUETOOTH_DEVICE_MAJOR_MASK_IMAGING = 0x0020,
- BLUETOOTH_DEVICE_MAJOR_MASK_WEARABLE = 0x0040,
- BLUETOOTH_DEVICE_MAJOR_MASK_TOY = 0x0080,
- BLUETOOTH_DEVICE_MAJOR_MASK_HEALTH = 0x0100,
-} bluetooth_device_major_mask_t;
-
-
-/**
- * Major device class (part of Class of Device)
- */
-typedef enum {
- BLUETOOTH_DEVICE_MAJOR_CLASS_MISC = 0x00, /**< Miscellaneous major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_COMPUTER = 0x01, /**< Computer major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_PHONE = 0x02, /**< Phone major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_LAN_ACCESS_POINT = 0x03, /**< LAN major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_AUDIO = 0x04, /**< AUDIO major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_PERIPHERAL = 0x05, /**< Peripheral major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_IMAGING = 0x06, /**< Imaging major device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_WEARABLE = 0x07, /**< Wearable device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_TOY = 0x08, /**< Toy device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_HEALTH = 0x09, /**< Health device class*/
- BLUETOOTH_DEVICE_MAJOR_CLASS_UNCLASSIFIED = 0x1F /**< Unknown major device class*/
-} bluetooth_device_major_class_t;
-
-typedef enum {
- BLUETOOTH_DEVICE_MINOR_CLASS_UNCLASSIFIED = 0x00, /**< unclassified minor class */
-
- /* About Computer Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_DESKTOP_WORKSTATION = 0x04, /**< desktop workstation
- minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_SERVER_CLASS_COMPUTER = 0x08, /**< server minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_LAPTOP = 0x0C, /**< laptop minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_PC_OR_PDA = 0x10, /**< PDA minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PALM_SIZED_PC_OR_PDA = 0x14, /**< PALM minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_WEARABLE_COMPUTER = 0x18, /**< Wearable PC minor class */
-
- /* About Phone Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CELLULAR = 0x04, /**< Cellular minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CORDLESS = 0x08, /**< cordless minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_SMART_PHONE = 0x0C, /**< smart phone minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_WIRED_MODEM_OR_VOICE_GATEWAY = 0x10,
- /**< voice gateway minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_COMMON_ISDN_ACCESS = 0x14, /**< ISDN minor class */
-
- /* About LAN/Network Access Point Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_FULLY_AVAILABLE = 0x04, /**< Fully available minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_1_TO_17_PERCENT_UTILIZED = 0x20, /**< 1-17% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_17_TO_33_PERCENT_UTILIZED = 0x40, /**< 17-33% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_33_TO_50_PERCENT_UTILIZED = 0x60, /**< 33-50% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_50_to_67_PERCENT_UTILIZED = 0x80, /**< 50-67% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_67_TO_83_PERCENT_UTILIZED = 0xA0, /**< 67-83% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_83_TO_99_PERCENT_UTILIZED = 0xC0, /**< 83-99% utilized minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_NO_SERVICE_AVAILABLE = 0xE0, /**< No service available minor class */
-
- /* About Audio/Video Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HEADSET_PROFILE = 0x04, /**< Headset minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HANDSFREE = 0x08, /**< Handsfree minor class*/
-
- BLUETOOTH_DEVICE_MINOR_CLASS_MICROPHONE = 0x10, /**< Microphone minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_LOUD_SPEAKER = 0x14, /**< Loud Speaker minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HEADPHONES = 0x18, /**< Headphones minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PORTABLE_AUDIO = 0x1C, /**< Portable Audio minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CAR_AUDIO = 0x20, /**< Car Audio minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_SET_TOP_BOX = 0x24, /**< Set top box minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HIFI_AUDIO_DEVICE = 0x28, /**< Hifi minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VCR = 0x2C, /**< VCR minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_CAMERA = 0x30, /**< Video Camera minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CAM_CORDER = 0x34, /**< CAM Corder minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_MONITOR = 0x38, /**<Video Monitor minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_DISPLAY_AND_LOUD_SPEAKER = 0x3C,
- /**< Video Display and Loud
- Speaker minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_CONFERENCING = 0x40, /**< Video Conferencing minor
- class */
-
- BLUETOOTH_DEVICE_MINOR_CLASS_GAMING_OR_TOY = 0x48, /**< Gaming or toy minor class */
-
- /* About Peripheral Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_KEY_BOARD = 0x40, /**< Key board minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_POINTING_DEVICE = 0x80, /**< Pointing Device minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_COMBO_KEYBOARD_OR_POINTING_DEVICE = 0xC0,
- /**< Combo Keyboard or pointing
- device minorclass */
-
- BLUETOOTH_DEVICE_MINOR_CLASS_JOYSTICK = 0x04, /**< JoyStick minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_GAME_PAD = 0x08, /**< Game Pad minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_REMOTE_CONTROL = 0x0C, /**< Remote Control minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_SENSING_DEVICE = 0x10, /**< Sensing Device minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_DIGITIZER_TABLET = 0x14, /**< Digitizer minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CARD_READER = 0x18, /**< Card Reader minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_DIGITAL_PEN = 0x1C, /**< Digital pen minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_SCANNER = 0x20, /**< Handheld scanner for bar-codes, RFID minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_GESTURAL_INPUT_DEVICE = 0x24, /**< Handheld gestural input device minor class */
-
- /* About Imaging Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_DISPLAY = 0x10, /**< Display minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CAMERA = 0x20, /**< Camera minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_SCANNER = 0x40, /**< Scanner minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PRINTER = 0x80, /**< Printer minor class */
-
- /* About Wearable Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_WRIST_WATCH = 0x04, /**< Wrist watch minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PAGER = 0x08, /**< Pager minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_JACKET = 0x0C, /**< Jacket minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HELMET = 0x10, /**< Helmet minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_GLASSES = 0x14, /**< Glasses minor class */
-
- /* About Toy Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_ROBOT = 0x04, /**< Robot minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_VEHICLE = 0x08, /**< Vehicle minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_DOLL_OR_ACTION = 0x0C, /**< Doll or Action minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_CONTROLLER = 0x10, /**< Controller minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_GAME = 0x14, /**< Game minor class */
-
- /* About Health Major class */
- BLUETOOTH_DEVICE_MINOR_CLASS_BLOOD_PRESSURE_MONITOR = 0x04, /**< Blood Pressure minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_THERMOMETER = 0x08, /**< Thermometer minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_WEIGHING_SCALE = 0x0C, /**< Weighing Scale minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_GLUCOSE_METER = 0x10, /**< Glucose minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PULSE_OXIMETER = 0x14, /**< Pulse Oximeter minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_HEART_OR_PULSE_RATE_MONITOR = 0x18,/**< Heart or pulse rate monitor minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_MEDICAL_DATA_DISPLAY = 0x1C, /**< Medical minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_STEP_COUNTER = 0x20, /**< Step Counter minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_BODY_COMPOSITION_ANALYZER = 0x24, /**< Body composition analyzer minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_PEAK_FLOW_MONITOR = 0x28, /**< Peak flow monitor minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_MEDICATION_MONITOR = 0x2C, /**< Medication monitor minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_KNEE_PROSTHESIS = 0x30, /**< Knee prosthesis minor class */
- BLUETOOTH_DEVICE_MINOR_CLASS_ANKLE_PROSTHESIS = 0x34, /**< Ankle prosthesis minor class */
-} bluetooth_device_minor_class_t;
-
-/**
- * structure to hold the device information
- */
-typedef struct {
- bluetooth_device_major_class_t major_class; /**< major device class */
- bluetooth_device_minor_class_t minor_class; /**< minor device class */
- bluetooth_device_service_class_t service_class;
- /**< service device class */
-} bluetooth_device_class_t;
-
-/**
-* structure to hold the device information
-*/
-typedef struct {
- bluetooth_device_address_t device_address; /**< device address */
- bluetooth_device_name_t device_name; /**< device name */
- bluetooth_device_class_t device_class; /**< device class */
- char uuids[BLUETOOTH_MAX_SERVICES_FOR_DEVICE][BLUETOOTH_UUID_STRING_MAX];
- unsigned int service_list_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE]; /**< Use enum values in bt_service_uuid_list_t */
- int service_index;
- int rssi; /**< received strength signal*/
- gboolean paired; /**< paired flag */
- gboolean connected; /**< connected flag */
- gboolean trust; /**< connected flag */
-} bluetooth_device_info_t;
-
-/**
- * structure to hold the paired device information
- */
-typedef struct {
- bluetooth_device_address_t device_address; /**< paired device address */
- bluetooth_device_name_t device_name; /**< device name */
- bluetooth_device_class_t device_class; /**< device class */
-} bluetooth_paired_device_info_t;
-
-/**
-* structure to hold the paired device information
-*/
-typedef struct {
- bluetooth_device_address_t device_address;
- /**< device address */
- char interface_name[BLUETOOTH_INTERFACE_NAME_LENGTH + 1];
- /**< network interface name */
-} bluetooth_network_device_info_t;
-
-/**
-* Stucture to hold discovery option
-*/
-typedef struct {
- unsigned short max_response; /**< the number of maximum response */
- unsigned short discovery_duration;
- /**< duration of discovery (seconds) */
- unsigned int classOfDeviceMask; /**< mask for values of class of device. to be used with
- classOfDevice variable */
-} bluetooth_discovery_option_t;
-
-/**
- * Stucture to hold event information
- */
-typedef struct {
- int event; /**< event type */
- int result; /**< Success or error value */
- void *param_data;
- /**<parameter data pointer */
- void *user_data;
-} bluetooth_event_param_t;
-
-typedef struct {
- bluetooth_device_address_t device_addr;
- char uuids[BLUETOOTH_MAX_SERVICES_FOR_DEVICE][BLUETOOTH_UUID_STRING_MAX];
- unsigned int service_list_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE]; /**< Use enum values in bt_service_uuid_list_t */
- unsigned int service_name_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE];
- int service_index;
-} bt_sdp_info_t;
-
-/**
- * Stucture to rfcomm receive data
- */
-
-typedef struct {
- int socket_fd;
- /**< the socket fd */
- int buffer_size;/**< the length of the receive buffer */
- char *buffer;
- /**< the receive data buffer */
-} bluetooth_rfcomm_received_data_t;
-
-/**
-* Stucture to rfcomm connection
-*/
-
-typedef struct {
- int socket_fd;
- /**< the socket fd */
- int device_role;/** < Device role - RFCOMM_ROLE_SERVER or RFCOMM_ROLE_CLIENT */
- bluetooth_device_address_t device_addr;
- /**< device address */
- char uuid[BLUETOOTH_UUID_STRING_MAX];
-} bluetooth_rfcomm_connection_t;
-
-/**
- * Stucture to rfcomm disconnection
- */
-typedef struct {
- int socket_fd;
- /**< the socket fd */
- int device_role;/** < Device role - RFCOMM_ROLE_SERVER or RFCOMM_ROLE_CLIENT */
- bluetooth_device_address_t device_addr;
- /**< device address */
- char uuid[BLUETOOTH_UUID_STRING_MAX];
-} bluetooth_rfcomm_disconnection_t;
-
-typedef struct {
- int socket_fd;
- /**< the socket fd */
- bluetooth_device_address_t device_addr;
- /**< device address */
-} bluetooth_rfcomm_connection_request_t;
-
-/**
- * HDP QOS types
- */
-typedef enum {
- HDP_QOS_RELIABLE,
- HDP_QOS_STREAMING,
- HDP_QOS_ANY
-}bt_hdp_qos_type_t;
-
-/**
- * HDP Role types
- */
-typedef enum {
- HDP_ROLE_SOURCE = 0x0,
- HDP_ROLE_SINK
-}bt_hdp_role_type_t;
-
-
-/**
- * Stucture to HDP connected
- */
-typedef struct {
- const char *app_handle; /**< the application handle */
- unsigned int channel_id; /**< the channel id */
- bt_hdp_qos_type_t type; /**< the QOS type */
- bluetooth_device_address_t device_address; /**< the remote address */
-} bt_hdp_connected_t;
-
-/**
- * Stucture to HDP disconnected
- */
-typedef struct {
- unsigned int channel_id; /**< the channel id */
- bluetooth_device_address_t device_address; /**< the remote address */
-} bt_hdp_disconnected_t;
-
-/**
- * Stucture to HDP data indication
- */
-typedef struct {
- unsigned int channel_id; /**< the channel id */
- const char *buffer; /**< the RX data buffer */
- unsigned int size; /**< the RX data size */
-} bt_hdp_data_ind_t;
-
-/**
- * Stucture to OPP client transfer information
- */
-typedef struct {
- char *filename;
- unsigned long size;
- int percentage;
-}bt_opc_transfer_info_t;
-
-/* Obex Server transfer type */
-#define TRANSFER_PUT "PUT"
-#define TRANSFER_GET "GET"
-/**
- * Stucture to OPP/FTP Server authorize information
- */
-typedef struct {
- char *filename;
- int length;
-} bt_obex_server_authorize_into_t;
-
-/**
- * Stucture to OPP/FTP server transfer information
- */
-typedef struct {
- char *filename;
- char *device_name;
- char *type;
- int transfer_id;
- unsigned long file_size;
- int percentage;
-} bt_obex_server_transfer_info_t;
-
-/**
- * Stucture to OOB data
- */
-
-typedef struct {
- unsigned char hash[BLUETOOTH_OOB_DATA_LENGTH];
- unsigned char randomizer[BLUETOOTH_OOB_DATA_LENGTH];
- unsigned int hash_len;
- unsigned int randomizer_len;
-} bt_oob_data_t;
-
-/**
- * Structure to GATT attribute handle data
- */
-
-typedef struct {
- int count;
- char **handle;
-} bt_gatt_handle_info_t;
-
-/**
- * Structure to GATT Remote service data
- */
-
-typedef struct {
- char *uuid;
- char *handle;
- bt_gatt_handle_info_t handle_info;
-} bt_gatt_service_property_t;
-
-/**
- * Structure to GATT Remote characteristic data
- */
-
-typedef struct {
- char *service_handle;
- bt_gatt_handle_info_t handle_info;
-} bt_gatt_discovered_char_t;
-
-/**
- * Structure to format of GATT Characteristic Value
- */
-
-typedef struct {
- unsigned char format;
- unsigned char exponent;
- unsigned short unit;
- unsigned char name_space;
- unsigned short description;
-} bt_gatt_char_format_t;
-
-/**
- * Structure to GATT Characteristic property
- */
-
-typedef struct {
- char *handle;
- char *uuid;
- char *name;
- char *description;
- bt_gatt_char_format_t format;
- unsigned char *val;
- unsigned int val_len;
- char *representation;
-} bt_gatt_char_property_t;
-
-/**
- * Structure to GATT Characteristic value
- */
-
-typedef struct {
- char *char_handle;
- guint8 *char_value;
- guint32 val_len;
-} bt_gatt_char_value_t;
-
-/**
- * Callback pointer type
- */
-typedef void (*bluetooth_cb_func_ptr) (int, bluetooth_event_param_t *, void *);
-
-/**
- * @fn int bluetooth_register_callback(bluetooth_cb_func_ptr callback_ptr, void *user_data)
- * @brief Set the callback function pointer for bluetooth event
- *
- *
- * This API will register the callback function, when any response and event are received from
- * bluetooth framework. @n
- * this registered callback function will be get called with appropriate event and data structures.
- * This function is a synchronous call. An application developer can call
- * bluetooth_register_callback() function to register a callback function of bluetooth_cb_func_ptr
- * type. This registered function will receive events of bluetooth_event_type_t type along with
- * data any.
- *
- *
- * @param[in] callback_ptr A pointer to the callback function
- * @param[in] user_data A pointer to user data
- * @return BLUETOOTH_ERROR_NONE - Success
- * @remark None
- * @see None
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param, void *user_data)
-{
- GMainLoop *main_loop = (GMainLoop*) user_data;
-
- switch(event)
- {
- // Code for each event
- default:
- g_main_loop_quit(main_loop);
- break;
- }
-}
-
-int main()
-{
- GMainLoop *main_loop = NULL;
- int ret = 0;
- g_type_init();
- main_loop = g_main_loop_new(NULL, FALSE);
- ret = bluetooth_register_callback(bt_event_callback, (void*)main_loop);
- if (ret >= BLUETOOTH_ERROR_NONE)
- {
- // bluetooth_register_callback returned Success
- }
- else
- {
- // bluetooth_register_callback returned failiure
- }
- g_main_loop_run(main_loop);
-}
-@endcode
- */
-int bluetooth_register_callback(bluetooth_cb_func_ptr callback_ptr, void *user_data);
-
-/**
- * @fn int bluetooth_deregister_callback(bluetooth_cb_func_ptr callback_ptr)
- * @brief Set the callback function pointer for bluetooth event
- *
- *
- * This API will register the callback function, when any response and event are received from
- * bluetooth framework. @n
- * this registered callback function will be get called with appropriate event and data structures.
- * This function is a synchronous call. An application developer can call
- * bluetooth_register_callback() function to register a callback function of bluetooth_cb_func_ptr
- * type. This registered function will receive events of bluetooth_event_type_t type along with
- * data any.
- *
- *
- * @param[in] none
- * @return BLUETOOTH_ERROR_NONE - Success
- * @remark None
- * @see None
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param, void *user_data)
-{
- GMainLoop *main_loop = (GMainLoop*) user_data;
-
- switch(event)
- {
- // Code for each event
- default:
- g_main_loop_quit(main_loop);
- break;
- }
-}
-
-int main()
-{
- GMainLoop *main_loop = NULL;
- int ret = 0;
- g_type_init();
- main_loop = g_main_loop_new(NULL, FALSE);
- ret = bluetooth_register_callback(bt_event_callback, (void*)main_loop);
- if (ret >= BLUETOOTH_ERROR_NONE)
- {
- // bluetooth_register_callback returned Success
- }
- else
- {
- // bluetooth_register_callback returned failiure
- }
- ret = bluetooth_deregister_callback(void);
- g_main_loop_run(main_loop);
-}
-@endcode
- */
-int bluetooth_unregister_callback(void);
-
-/**
- * @fn int bluetooth_enable_adapter(void)
- * @brief Enable the Bluetooth H/W
- *
- *
- * This API can be used to activate Bluetooth. It initializes Bluetooth protocol stack for use and
- * send request to bluetooth chip for activation.
- * This function is typically called at startup or when Bluetooth services are required. This
- * function must be called before calling any other API of Bluetooth operations.
- *
- * Before performing any operations like Device discover, service search etc.., the adapter must be
- * enabled.
- *
- * This function is a asynchronous call.
- * If the call is success then the application will receive BLUETOOTH_EVENT_ENABLED event
- * through registered callback function with appropriate result code
- * BLUETOOTH_CHANGE_STATUS_TIMEOUT - Timeout has happen \n
- * BLUETOOTH_ERROR_NONE - Success \n
- *
- * If the adpter is not enabled with in 30 seconds then BLUETOOTH_EVENT_ENABLED with result code
- * BLUETOOTH_CHANGE_STATUS_TIMEOUT will come
- *
- * @return BLUETOOTH_ERROR_NONE - Success\n
- * BLUETOOTH_ERROR_DEVICE_ALREADY_ENABLED - Adapter already enabled\n
- * BLUETOOTH_ERROR_ACCESS_DENIED - Enabling adapter is not allowed by MDM policy\n
- * BLUETOOTH_ERROR_IN_PROGRESS - Adapter is activating or deactivating\n
- * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
- * @remark None
- * @see bluetooth_check_adapter, bluetooth_disable_adapter
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_ENABLED:
- if (param->result == BLUETOOTH_ERROR_NONE)
- {
- // Successfully Enabled
- }
- else
- {
- // Failed
- }
- break;
- }
-}
-
-...
-
-int ret = 0;
-ret = bluetooth_enable_adapter();
-
-@endcode
- */
-int bluetooth_enable_adapter(void);
-
-/**
- * @fn int bluetooth_disable_adapter(void)
- * @brief Disable the Bluetooth H/W
- *
- *
- * This function disables Bluetooth protocol stack and hardware. This function is called when
- * Bluetooth is no longer used. It will internally free all resources and power off the RF radio.
- *
- * Bluetooth adapter should be disabled to switch off Bluetooth chip (and thereby saving power).
- * bluetooth_disable_adapter() API will do that job for you. After switching off Bluetooth,
- * BLUETOOTH_EVENT_DISABLED will be sent by SDK to application for confirmation with appropriate
- * error code.
- * The various error codes are BLUETOOTH_ERROR_NONE for success and BLUETOOTH_ERROR_INTERNAL for
- * internal error.
- *
- * This function is a asynchronous call.
- * If this call is success then the applications will receive BLUETOOTH_EVENT_DISABLED event
- * through registered callback function.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success\n
- * BLUETOOTH_ERROR_IN_PROGRESS - Adapter is activating or deactivating\n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled\n
- * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
- * @remark None
- * @see bluetooth_check_adapter, bluetooth_enable_adapter
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_DISABLED:
- if (param->result == BLUETOOTH_ERROR_NONE)
- {
- // Successfully disabled
- }
- else
- {
- // Failed
- }
- break;
- }
-}
-
-...
-
-int ret = 0;
-ret = bluetooth_disable_adapter();
-@endcode
- */
-int bluetooth_disable_adapter(void);
-
-/**
- * @fn int bluetooth_reset_adapter(void)
- * @brief Reset the Bluetooth H/W and values
- *
- *
- * This function resets Bluetooth protocol stack and hardware. This function is called when
- * an user want to initialize Bluetooth environment.
- *
- * The various error codes are BLUETOOTH_ERROR_NONE for success and BLUETOOTH_ERROR_INTERNAL for
- * internal error.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success\n
- * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
- * @remark None
- * @see bluetooth_check_adapter, bluetooth_enable_adapter
-@code
-...
-
-int ret = 0;
-ret = bluetooth_reset_adapter();
-@endcode
- */
-int bluetooth_reset_adapter(void);
-
-/**
- * @fn int bluetooth_is_supported(void)
- * @brief Check if the bluetooth is supported or not by the current target
- *
- * This API checks whether the bluetooth is supported or not.
- * This API only run by root permission.
- * This API was made for the MDM service.
- *
- * This function is a synchronous call.
- *
- * @return 0 - if bluetooth is not supported\n
- * 1 - if bluetooth is supported\n
- * BLUETOOTH_ERROR_INTERNAL - Error in API internal
- * @remark None
-@code
-
-int ret = 0;
-ret = bluetooth_is_supported();
-@endcode
- */
-int bluetooth_is_supported(void);
-
-
-/**
- * @fn int bluetooth_check_adapter(void)
- * @brief Check the current status of the Bluetooth adapter
- *
- *
- * This API checks whether the Bluetooth adapter is enabled or not. Before performing any operations
- * the bluetooth adapter should be enabled. This API helps to find out the current state of the
- * bluetooth adapter.
- * This API get the adapter internal data structure and check current adapter status.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ADAPTER_DISABLED - if bluetooth adapter is disabled\n
- * BLUETOOTH_ADAPTER_ENABLED - if bluetooth adapter is enabled\n
- * @remark None
- * @see bluetooth_enable_adapter, bluetooth_disable_adapter
-@code
-
-int ret = 0;
-ret = bluetooth_check_adapter();
-@endcode
- */
-int bluetooth_check_adapter(void);
-
-/**
- * @fn int bluetooth_get_local_address(bluetooth_device_address_t *local_address)
- * @brief Get the local adapter bluetooth address
- *
- *
- * This API is used, get the device address of the local bluetooth adapter. Before calling this API,
- * the adapter should be enabled.
- * In its output parameter, you can receive bluetooth_device_address_t type of pointer which will
- * contain Bluetooth address.
- * Since its inconvenient for user to remember the address, Bluetooth provides a method to have a
- * friendly name for each device.
- * There is no event callback for this API.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Succeess \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer) \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- * @param[out] local_address a device address of local bluetooth adapter
- * @remark None
- * @see None
-@code
-
-bluetooth_device_address_t local_address={0,};
-int ret = 0;
-
-ret = bluetooth_get_local_address(&local_address);
-@endcode
- */
-int bluetooth_get_local_address(bluetooth_device_address_t *local_address);
-
-/**
- * @fn int bluetooth_get_local_name(bluetooth_device_name_t* local_name)
- * @brief Get the local device name
- *
- *
- * This function is used, get the local device name. Since its difficult to remember the Adapter
- * address, the friendly name can be assigned to the adapter and we can get it using this API. This
- * friendly name is retrived by the remote device and displaying.
- * Before calling this API, the adapter should be enabled. There is no event callback for this API.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer)\n
- * @param[out] local_name a local device name
- * @remark None
- * @see None
-@code
-bluetooth_device_name_t local_name={0,}
-int ret = 0;
-ret = bluetooth_get_local_name (&local_name);
-@endcode
- */
-int bluetooth_get_local_name(bluetooth_device_name_t *local_name);
-
-/**
- * @fn int bluetooth_set_local_name(const bluetooth_device_name_t *local_name)
- * @brief Set the local device name
- *
- *
- * This function is used to set the local device name. This is a human friendly name whose
- * length can be BLUETOOTH_DEVICE_NAME_LENGTH_MAX maximum
- *
- * This function is a synchronous call.
- *
- * @param[in] local_name bluetooth device name to set local device
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
- * BLUETOOTH_ERROR_INVALID_DATA - Device address provided is incorrect \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Pre-allocated memory error \n
- * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
- *
- * @remark None
-
-@code
-bluetooth_device_name_t local_name={0,}
-int ret = 0;
-ret = bluetooth_set_local_name (&local_name);
-@endcode
- */
-int bluetooth_set_local_name(const bluetooth_device_name_t *local_name);
-
-
-/**
- * @fn int bluetooth_is_service_used(const char *service_uuid, gboolean *used)
- * @brief Check if the uuid is used or not
- *
- * This function is used to check if the uuid is used or not.
- *
- * This function is a synchronous call.
- *
- * @param[in] service_uuid service uuid (UUID 128 bit as string)
- * @param[out] used if the uuid is used or not
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
- * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
- *
- * @remark None
- *
-@code
-gboolean used = FALSE;
-const char *uuid ="00001101-0000-1000-8000-00805F9B34FB";
-ret = bluetooth_is_service_used(uuid, &used);
-@endcode
- */
-int bluetooth_is_service_used(const char *service_uuid, gboolean *used);
-
-/**
- * @fn int bluetooth_is_device_connected(const bluetooth_device_address_t *device_address, bluetooth_service_type_t type, gboolean *is_connected)
- * @brief Check if the device is connected to the specific service
- *
- * This function is used to check if if the device is connected to the specific service.
- *
- * This function is a synchronous call.
- *
- * @param[in] local_address a device address of remote bluetooth device
- * @param[in] type the service type
- * @param[out] is_connected if the device is connected or not
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
- * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
- *
- * @remark None
- *
-@code
-gboolean is_connected = FALSE;
-bluetooth_device_address_t device_address={{0x00,0x0D,0xFD,0x24,0x5E,0xFF}};
-ret = bluetooth_is_device_connected(&device_address, BLUETOOTH_HSP_SERVICE, &used);
-@endcode
- */
-int bluetooth_is_device_connected(const bluetooth_device_address_t *device_address,
- bluetooth_service_type_t type,
- gboolean *is_connected);
-
-/**
- * @fn int bluetooth_get_discoverable_mode(bluetooth_discoverable_mode_t *discoverable_mode_ptr)
- * @brief Get the visibility mode
- *
- *
- * This function is used to get the discoverable mode (Visibility option). Depending upon the
- * visibity mode, the property of the device is determined whether it can be discoverable, non
- * discoverable, connectable etc. Before calling this API make sure that the adapter is enabled.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_DATA - Invalid data \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
- * @param[out] discoverable_mode current bluetooth discoverable mode
- * @remark None
- * @see bluetooth_set_discoverable_mode
- @code
- bluetooth_discoverable_mode_t discoverable_mode_ptr;
- int ret = 0;
- ret = bluetooth_get_discoverable_mode (&discoverable_mode_ptr);
- @endcode
- */
-int bluetooth_get_discoverable_mode(bluetooth_discoverable_mode_t *discoverable_mode_ptr);
-
-/**
- * @fn int bluetooth_set_discoverable_mode(bluetooth_discoverable_mode_t discoverable_mode,
- * int timeout)
- * @brief Set the visibility mode
- *
- *
- * This function is used to set the discoverable mode (Visibility option).
- *
- * Many times user may want to keep his device discoverable so that when peer device is performing
- * device search, he/she can find user's device. Application programmer can keep the mode as
- * BLUETOOTH_DISCOVERABLE_MODE_GENERAL_DISCOVERABLE or
- * BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE for the same purpose. However, all these
- * modes cause bluetooth adapter to consume more battery. Hence developer should generally
- * keep discoverable mode as BLUETOOTH_DISCOVERABLE_MODE_CONNECTABLE.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NOT_SUPPORT - Requested mode is not supported \n
- *
- * @param[in] discoverable_mode the bluetooth discoverable mode to set
- * @param[in] timeout discoverable time in only limited discoverable mode (second), default: 0
- * @remark None
- * @see bluetooth_get_discoverable_mode
-
-@code
-
-bluetooth_discoverable_mode_t mode;
-int ret = 0;
-mode= BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE;
-ret = bluetooth_set_discoverable_mode (mode, 180);
-
-@endcode
- */
-int bluetooth_set_discoverable_mode(bluetooth_discoverable_mode_t discoverable_mode,
- int timeout);
-
-
-/**
- * @fn int bluetooth_get_timeout_value(int *timeout)
- * @brief Get the visibility timeout value
- *
- *
- * This function is used to get the visibility timeout
- * Before calling this API make sure that the adapter is enabled.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_DATA - Invalid data \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
- * @param[out] timeout remain visibility timeout value
- * @remark None
- * @see bluetooth_set_discoverable_mode
- @code
- int timeout;
- int ret = 0;
- ret = bluetooth_get_timeout_value (&timeout);
- @endcode
- */
-int bluetooth_get_timeout_value(int *timeout);
-
-
-/**
- * @fn int bluetooth_start_discovery(unsigned short max_response, unsigned short discovery_duration,
- * unsigned int classOfDeviceMask)
- * @brief Start the device discovery
- *
- * To connect connect to peer bluetooth device, you will need to know its bluetooth address and its
- * name. You can search for Bluetooth devices in vicinity by bluetooth_start_discovery() API. It
- * first performs an inquiry. For each device found from the inquiry it gets the remote name of the
- * device. Bluetooth device address and name are given to Application via
- * BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event. In param_data of bluetooth_event_param_t, you will
- * receive a pointer to a structure of bluetooth_device_info_t type. you will receive device
- * address, device name, device class, rssi (received signal strength indicator). please see
- * bluetooth_device_info_t for more details.
- *
- *
- * This API provides searching options like max responses, discovery duration in seconds and class
- * of device mask to filter device search. some times there may be too many bluetooth devices in
- * vicinity of your device.in such scenario, application can request to reduce number of responces
- * (BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event) with help of max_response parameter. However if you
- * pass zero, bluetooth adapter will not restrict number of responses. you can also specify duration
- * of the seach in discovery_duration. bluetooth adapter will automatically stop device search after
- * application defined time. please note that discovery_duration should be mentioned in seconds.
- * Also note that search will end after 180 seconds automatically if you pass 0 in discovery
- * duration.
- *
- * sometimes user may want to search for a perticular kind of device. for ex, mobile or pc. in such
- * case, you can use classOfDeviceMask parameter. please see bluetooth_device_service_class_t,
- * bluetooth_device_major_class_t and bluetooth_device_minor_class_t enums
- *
- * This function is a asynchronous call.
- * If the call is success then the application will receive BLUETOOTH_EVENT_DISCOVERY_STARTED event
- * through registered callback function.
- *
- * The discovery is responded by an BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event for each device it
- * finds and an BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED event for each fount device its name
- * finds.
- *
- * The completion or cancellation of the discovery is indicated by an
- * BLUETOOTH_EVENT_DISCOVERY_FINISHED event.
- *
- * The device discovery can be cancelled by calling bluetooth_stop_discovery().
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled \n
- * BLUETOOTH_ERROR_DEVICE_BUSY - Bluetooth adapter is busy doing some operation \n
- * BLUETOOTH_ERROR_INTERNAL - System error like heap full has occured or bluetooth
- agent is not running \n
- *
- * @param[in] max_response define the maximum response of the number of founded devices
- (0 means unlimited)
- * @param[in] discovery_duration define bluetooth discovery duration (0 means 180s )
- * @param[in] classOfDeviceMask define classes of the device mask which user wants
- (refer to class of device)
- * @remark None
- * @see bluetooth_cancel_discovery, bluetooth_device_info_t
-
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND:
- {
- bluetooth_device_info_t *device_info = NULL;
- printf("BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND, result [0x%04x]",
- param->result);
- device_info = (bluetooth_device_info_t *)param->param_data;
- memcpy(&searched_device, &device_info->device_address,
- sizeof(bluetooth_device_address_t));
- printf("dev [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]",
- device_info->device_address.addr[0],
- device_info->device_address.addr[1],
- device_info->device_address.addr[2],
- device_info->device_address.addr[3],
- device_info->device_address.addr[4],
- device_info->device_address.addr[5]);
- break;
- }
- case BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED:
- {
- bluetooth_device_info_t *device_info = NULL;
- printf("BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED, result [0x%04x]",
- param->result);
- device_info = (bluetooth_device_info_t *)param->param_data;
- memcpy(&searched_device, &device_info->device_address,
- sizeof(bluetooth_device_address_t));
- printf("dev [%s] [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]",
- device_info->device_name.name,
- device_info->device_address.addr[0],
- device_info->device_address.addr[1],
- device_info->device_address.addr[2],
- device_info->device_address.addr[3],
- device_info->device_address.addr[4],
- device_info->device_address.addr[5]);
- break;
- }
-
- case BLUETOOTH_EVENT_DISCOVERY_FINISHED:
- printf("BLUETOOTH_EVENT_DISCOVERY_FINISHED, result[0x%04x]", param->result);
- break;
- }
-}
-
-unsigned short max_response;
-unsigned short discovery_duration;
-unsigned classOfDeviceMask;
-int ret = 0;
-
-max_response =0;
-discovery_duration =0;
-classOfDeviceMask =0;
-
-ret = bluetooth_start_discovery(max_response,discovery_duration,classOfDeviceMask);
-
-@endcode
- *
- */
-
-int bluetooth_start_discovery(unsigned short max_response,
- unsigned short discovery_duration,
- unsigned int classOfDeviceMask);
-
-/**
- * @fn int bluetooth_cancel_discovery (void)
- * @brief Cancel the on-going device discovery operation
- *
- *
- * This function stops the on-going device discovery operation. This API has to be called after the
- * bluetooth_start_discovery API and before the BLUETOOTH_EVENT_DISCOVERY_FINISHED event comes of
- * the bluetooth_start_discovery API
- *
- * Normally the device discovery takes a more time (~10.24 seconds) to get all the devices in its
- * vicinity and it recevies as BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event. This API helps us to
- * cancel the discover request once the user received the device to which he wish to connect.
- *
- * This function is a asynchronous call.
- * If the call is success to cancel discovey then the application will receive
- * BLUETOOTH_EVENT_DISCOVERY_FINISHED event through registered callback function
- * with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure the error code will be
- * BLUETOOTH_ERROR_NONE
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_NOT_IN_OPERATION - No Discovery operation in progess to cancel \n
- * BLUETOOTH_ERROR_ACCESS_DENIED - Currently in discovery but it is requested from
- other application \n
- * BLUETOOTH_ERROR_INTERNAL - Internel IPC error \n
- * @remark None
- * @see bluetooth_start_discovery
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_DISCOVERY_FINISHED:
- TC_PRT("BLUETOOTH_EVENT_DISCOVERY_FINISHED, result[0x%04x]", param->result);
- break;
- }
-}
-
-..
-
-int ret = 0;
-
-ret = bluetooth_cancel_discovery();
-@endcode
- */
-int bluetooth_cancel_discovery(void);
-
-/**
- * @fn int bluetooth_is_discovering(void)
- * @brief Check for the device discovery is in-progress or not.
- *
- * This API is used to check the current status of the Discovery operation.If discovery is in\
- * progress normally other operations are not allowed.
- * If a device discovery is in progress, we have to either cancel the discovery operation or wait
- * for the BLUETOOTH_EVENT_DISCOVERY_FINISHED
- * event before performing other operations. This API is used to get for the current discovery
- * operation status and using bluetooth_cancel_discovery()
- * we can cancell the ongoing discovery process.
- * Before calling this API, make sure that the adapter is enabled. There is no callback event for
- * this API.
- *
- * This function checks whether the device discovery is started or not.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Discovery is not in progress \n
- * BLUETOOTH_ERROR_NONE+1 - Discovery in progress \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- *
- * @remark None
- * @see bluetooth_start_discovery, bluetooth_cancel_discovery
-
-@code
-int ret = 0;
-ret = bluetooth_is_discovering ();
-@endcode
- */
-int bluetooth_is_discovering(void);
-
-/**
- * @fn int bluetooth_bond_device(const bluetooth_device_address_t *device_address)
- * @brief Initiate a bonding process
- *
- *
- * This function initiates a bonding procedure with a peer device. The bonding procedure
- * enables authentication and optionally encryption on the Bluetooth link.
- *
- * Bonding is applied to the discovered device to which we need a secure connection. We cannot
- * inititate the bonding request to the devices already in the paired list.
- *
- * Usually we call this API after the device discovery.
- * This function is a asynchronous call.
- *
- * Response will be received through BLUETOOTH_EVENT_BONDING_FINISHED event. It can any of the below
- * mentioed result code
- * BLUETOOTH_ERROR_PARING_FAILED - Pairing faied \n
- * BLUETOOTH_ERROR_ACCESS_DENIED - Authetication rejected \n
- * BLUETOOTH_ERROR_CANCEL_BY_USER - Cancelled by the user \n
- * BLUETOOTH_ERROR_PARING_FAILED - Pairing failed \n
- * BLUETOOTH_ERROR_TIMEOUT - Timeout has haapened \n
- *
- * If the remote user is not responding with in a specific time(60 seconds), then a timeout happens
- * and BLUETOOTH_EVENT_BONDING_FINISHED callback event is called with and BLUETOOTH_ERROR_TIMEOUT
- * result code
- *
- * The bonding operation can be cancelled by calling bluetooth_cancel_bonding().
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_DEVICE_BUSY - Adapter is busy or Discovery is in Progress \n
- * BLUETOOTH_ERROR_INVALID_DATA - Invalid BD address \n
- * @exception None
- * @param[in] device_address This indicates an address of the device with which the pairing
- * should be initiated
- * @remark None
- * @see bluetooth_cancel_bonding
- @code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_BONDING_FINISHED:
- {
- TC_PRT("BLUETOOTH_EVENT_BONDING_FINISHED, result [0x%04x]", param->result);
- if (param->result >= BLUETOOTH_ERROR_NONE)
- {
- bluetooth_device_info_t *device_info = NULL;
- device_info = (bluetooth_device_info_t *)param->param_data;
- printf("dev [%s] [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]
- mjr[%#x] min[%#x] srv[%#x]",
- device_info->device_name.name,
- device_info->device_address.addr[0],
- device_info->device_address.addr[1],
- device_info->device_address.addr[2],
- device_info->device_address.addr[3],
- device_info->device_address.addr[4],
- device_info->device_address.addr[5],
- device_info->device_class.major_class,
- device_info->device_class.minor_class,
- device_info->device_class.service_class);
- }
- else
- {
- //bonding failed
- }
- break;
- }
- }
-}
-
-...
-
-int ret = 0;
-bluetooth_device_address_t device_address={{0}};
-
-ret = bluetooth_bond_device(&device_address);
-
-@endcode
- */
-int bluetooth_bond_device(const bluetooth_device_address_t *device_address);
-
-/**
- * @fn int bluetooth_cancel_bonding(void)
- * @brief Cancel the on-going bonding process
- *
- * This API is called to cancel the on-going bonding procedure. It should be called before the
- * BLUETOOTH_EVENT_BONDING_FINISHED event comes.
- * This API is useful when the remote device is not responding to the bond request or we wish to
- * cancel the bonding request. In this case we need not wait for the timeout to happen.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NOT_IN_OPERATION - No bonding request in progress \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * @exception None
- * @remark None
- * @see bluetooth_bond_device
-@code
-...
-
-int ret = 0;
-
-ret = bluetooth_cancel_bonding();
-@endcode
- */
-int bluetooth_cancel_bonding(void);
-
-/**
- * @fn int bluetooth_unbond_device(const bluetooth_device_address_t *device_address)
- * @brief Remove bonding
- *
- *
- * To communicate with remote device over bluetooth link, user should bond with peer device.
- * After bonding is over, peer device is added to list of bonded devices. bluetooth_unbond_device()
- * API is used to remove peer device from the list. Please note that after removing the device
- * from bonded device list, you cannot communication with peer device until bonding happens again.
- *
- * User can call this function by passing bluetooth device address of any bonded device. Please note
- * that after successful return of this function, any bluetooth application running on your device
- * will not be able to communicate with unbonded device until bond operation happens again using
- * bluetooth_bond_device()
- *
- *
- * This function is a asynchronous call. The request to remove the specified device from the bonded
- * list is responded by an BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED event. if the operation is success,
- * you will receive BLUETOOTH_ERROR_NONE. BLUETOOTH_ERROR_NOT_PAIRED may be received in result code
- * in case if there is a problem in locating given bluetooth device address in bonded devices list
- *
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Device address is not valid \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled \n
- * BLUETOOTH_ERROR_DEVICE_BUSY - Bluetooth adapter is busy doing some operation \n
- * BLUETOOTH_ERROR_INVALID_DATA - Device address provided is incorrect \n
- * BLUETOOTH_ERROR_INTERNAL - System error like heap full has occured or bluetooth
- * agent is not running \n
- * BLUETOOTH_ERROR_NOT_PAIRED - Device address mentioned in the argument is not a
- * bonded device \n
- *
- * @param[in] device_address This indicates an address of the device to remove bonding
- *
- * @remark None
- *
- * @see bluetooth_bond_device, bluetooth_cancel_bonding
- *
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event) {
- case BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED: {
- bluetooth_device_address_t *dev_addr = NULL;
-
- if (param->result == BLUETOOTH_ERROR_NONE) {
- dev_addr = (bluetooth_device_address_t *)param->param_data;
- //Unbound scuccess
- printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- dev_addr->addr[0], dev_addr->addr[1]
- dev_addr->addr[2], dev_addr->addr[3]
- dev_addr->addr[4], dev_addr->addr[5]
- } else {
- //unbound failure
- }
- }
- }
-}
-
-...
-
-int ret = 0;
-bluetooth_device_address_t *device_address;
-
-// copy valid device address in device_address
-
-ret = bluetooth_unbond_device(device_address);
-@endcode
- */
-int bluetooth_unbond_device(const bluetooth_device_address_t *device_address);
-
-/**
- * @fn int bluetooth_get_bonded_device_list(GPtrArray **dev_list)
- * @brief Get bonded(paired) device list
- *
- *
- * This API gets all bonded device list.
- * The devices in the bonded device list further can be used to perform the authorization by calling
- * bluetooth_authorize_device API.
- *
- * This function is a synchronous call.
- * Information for bonded devices can be obtained when result code is BLUETOOTH_ERROR_NONE. If not,
- * there is no valid information in the dev_list.
- * The len field in the dev_list represents the number of bonded devices. The data structure for
- * bonded device information is bluetooth_device_info_t.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NOT_SUPPORT - Opreation not supported \n
- * @remark None
- * @see bluetooth_bond_device, bluetooth_unbond_device, bluetooth_authorize_device
- @code
-void bt_get_bonded_devices(void)
-{
-...
- int i;
- GPtrArray *devinfo = NULL;
- bluetooth_device_info_t *ptr;
-
- // allocate the g_pointer_array
- devinfo = g_ptr_array_new();
-
- ret = bluetooth_get_bonded_device_list(&devinfo);
- if (ret != BLUETOOTH_ERROR_NONE)
- {
- printf("bluetooth_get_bonded_device_list failed with [%d]",ret);
- }
- else
- {
- printf("g pointer arrary count : [%d]", devinfo->len);
- for (i=0; i<devinfo->len; i++)
- {
- ptr = g_ptr_array_index(devinfo, i);
- if (ptr != NULL)
- {
- printf("Name [%s]\n", ptr->device_name.name);
- printf("Major Class [%d]\n", ptr->device_class.major_class);
- printf("Minor Class [%d]\n", ptr->device_class.minor_class);
- printf("Service Class [%d]\n", ptr->device_class.service_class);
- printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- ptr->device_address.addr[0],
- ptr->device_address.addr[1], ptr->device_address.addr[2],
- ptr->device_address.addr[3],
- ptr->device_address.addr[4], ptr->device_address.addr[5]);
-
- // handle
- ...
- }
- }
- }
- // free g_pointer_array
- g_ptr_array_free(devinfo, TRUE);
-}
-
-@endcode
- */
-int bluetooth_get_bonded_device_list(GPtrArray **dev_list);
-
-/**
- * @fn int bluetooth_get_bonded_device(const bluetooth_device_address_t *device_address,
- * bluetooth_device_info_t *dev_info)
- * @brief Get a bonded(paired) device
- *
- *
- * This API gets a bonded device.
- *
- * This function is a synchronous call.
- * Information for bonded devices can be obtained when result code is BLUETOOTH_ERROR_NONE. If not,
- * there is no valid information in the dev_info.
- * The data structure for bonded device information is bluetooth_device_info_t.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NOT_SUPPORT - Opreation not supported \n
- * @remark None
- * @see bluetooth_bond_device, bluetooth_unbond_device, bluetooth_authorize_device
- @code
-void bt_get_bonded_device(void)
-{
-...
- int i;
- bluetooth_device_info_t devinfo = {0};
- bluetooth_device_address_t device_address={{0x00,0x1C,0x43,0x2B,0x1A,0xE5}};
-
- ret = bluetooth_get_bonded_device(&device_address, &devinfo);
- if (ret != BLUETOOTH_ERROR_NONE)
- {
- printf("bluetooth_get_bonded_device failed with [%d]",ret);
- }
- else
- {
- printf("Name [%s]\n", devinfo.device_name.name);
- printf("Major Class [%d]\n", devinfo.device_class.major_class);
- printf("Minor Class [%d]\n", devinfo.device_class.minor_class);
- printf("Service Class [%d]\n", devinfo.device_class.service_class);
- printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", devinfo.device_address.addr[0],
- devinfo.device_address.addr[1], devinfo.device_address.addr[2],
- devinfo.device_address.addr[3], devinfo.device_address.addr[4],
- devinfo.device_address.addr[5]);
-
- // handle
- ...
- }
-}
-
-@endcode
- */
-int bluetooth_get_bonded_device(const bluetooth_device_address_t *device_address,
- bluetooth_device_info_t *dev_info);
-
-/**
- * @fn int bluetooth_set_alias(const bluetooth_device_address_t *device_address, const char *alias)
- * @brief set alias for bonded device
- *
- *
- * This function set alias for bonded device.
- *
- * This function is a synchronous call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * @param[in] device_address This indicates an address of the remote device
- * @param[in] alias This indicates an alias to set
- * @remark None
- * @see None
-@code
-int ret = 0;
-ret = bluetooth_set_alias(&remote_address);
-@endcode
- */
-int bluetooth_set_alias(const bluetooth_device_address_t *device_address,
- const char *alias);
-
-/**
- * @fn int bluetooth_get_remote_device(const bluetooth_device_address_t *device_address)
- * @brief Get remote deivice
- *
- *
- * This function gets specific remote device.
- *
- * This function is a asynchronous call.
- * This API is responded by an BLUETOOTH_EVENT_REMOTE_DEVICE_READ event.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NOT_SUPPORT - Operation not supported \n
- * @param[in] device_address This indicates an address of the remote device
- * @remark None
- * @see None
-@code
-int ret = 0;
-ret = bluetooth_get_remote_device(&remote_address);
-@endcode
- */
-int bluetooth_get_remote_device(const bluetooth_device_address_t *device_address);
-
-/**
- * @fn int bluetooth_authorize_device(const bluetooth_device_address_t *device_address,
- * gboolean authorized)
- * @brief Authorize/Unauthorize a bonded device
- *
- *
- * This function authorizes/unauthorize a bonded device. It decides the device to connect
- * with/without user confirmation.
- *
- * If we select a paired device and make it authorized by calling this API with the authorized
- * parameter to TRUE, then it will not ask for the user conformation before connecting. Similarly
- * if we unauthorize the paired device by calling this API with the authorized parameter to FALSE,
- * then it will ask for the user conformation before the connection.
- *
- * This API supposed to be called on the paired devices. Which means we have to use this API only
- * after successful pairing.
- *
- * This function is a asynchronous call.
- * Response will be received through BLUETOOTH_EVENT_DEVICE_AUTHORIZED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * @exception BLUETOOTH_ERROR_INTERNAL - Cannot get the interal DBUS proxy \n
- * @param[in] device_address This indicates an address of the device to authorize \n
- * @param[in] authorized TRUE : authorize FALSE: unauthorize
- * @remark None
- * @see bluetooth_get_bonded_device_list
-@code
-void bt_event_callback(int event, bluetooth_event_param_t *param)
-{
- switch(event)
- {
- case BLUETOOTH_EVENT_DEVICE_AUTHORIZED :
- {
- if (param->result == BLUETOOTH_ERROR_NONE)
- {
- //Device authorized
- }
- //device authorization failed failure
- }
- }
-}
-
-...
-
-int ret = 0;
-bluetooth_device_address_t device_address={{0}};
-gboolean authorized;
-
-authorized =TRUE;
-
-ret = bluetooth_authorize_device(&device_address,authorized);
-@endcode
- */
-int bluetooth_authorize_device(const bluetooth_device_address_t *device_address,
- gboolean authorized);
-
-/**
- * @fn int bluetooth_search_service(const bluetooth_device_address_t *device_address)
- * @brief Get all services supported by remote device
- *
- *
- * This API call initiates the search for the services supported by the specified device. Normally
- * the service search will take a couple of seconds to get it completed. Before calling this API
- * make sure that the Adapter is enabled. We have to give the device address of the remote device to
- * perform the service search. We can get the device address by doing a device discovery operation.
- *
- *
- * This function is a asynchronous call.
- * The service search request is responded by BLUETOOTH_EVENT_SERVICE_SEARCHED event.
- *
- * There is a timeout associated with the service search. The default time out is 40 seconds. If the
- * remove device did not respond with in the time out period the BLUETOOTH_EVENT_SERVICE_SEARCHED
- * event is generated with appropriate result code.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_SERVICE_SEARCH_ERROR - Service search error (NULL device address) \n
- * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
- * @param[in] device_address This indicates an address of the device
- * whose services need to be found
- * @remark None
- * @see bluetooth_cancel_service_search
- */
-int bluetooth_search_service(const bluetooth_device_address_t *device_address);
-
-/**
- * @fn int bluetooth_cancel_service_search(void)
- * @brief Cancel the ongoing service search operation
- *
- *
- * This function cancel the ongoing service search operation. This API is usually calling after the
- * bluetooth_search_service API.
- * Normally service search will take a more time (> 5 seconds) to complete. This API will be called
- * if the user wish to cancel the Ongoing service search operation.
- *
- * This API should be called just after the bluetooth_search_service API and before the
- * BLUETOOTH_EVENT_SERVICE_SEARCHED event
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_CANCEL - Error in service search cancel operation \n
- * BLUETOOTH_ERROR_NOT_PAIRED - Not paired device \n
- * BLUETOOTH_ERROR_NOT_IN_OPERATION - Searching service is not in operation \n
- *
- * @remark None
- * @see bluetooth_search_service
-@code
-...
-
-int ret = 0;
-ret = bluetooth_cancel_service_search();
-@endcode
-*/
-int bluetooth_cancel_service_search(void);
-
-/**
- * @fn int bluetooth_rfcomm_create_socket(const char *uuid)
- * @brief Register rfcomm socket with a specific uuid
- *
- *
- * This API register rfcomm socket with the given UUID. The return value of this API is the socket
- * descriptor of the server.
- * This is the first API which is called to create the server. Once we created the server socket,
- * we will listen on that return socket.
- * So a bluetooth_rfcomm_listen_and_accept should follow this API call. This is a synchronous call.
- *
- *
- * @return socket FD on Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_INTERNAL - Internal error\n
- * BLUETOOTH_ERROR_MAX_CONNECTION - Maximum connection reached\n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * @param[in] UUID (128 bits)
- *
- * @remark None
- * @see bluetooth_rfcomm_listen_and_accept, bluetooth_rfcomm_remove_socket
- *
- @code
-
- const char *rfcomm_test_uuid="00001101-0000-1000-8000-00805F9B34FB";
- fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
-
- @endcode
- */
-int bluetooth_rfcomm_create_socket(const char *uuid);
-
-/**
- * @fn int bluetooth_rfcomm_remove_socket(int socket_fd, const char *uuid)
- * @brief De-register the rfcomm socket
- *
- *
- * This API deregister rfcomm socket with the given socket fd and UUID. If the remote device is
- * already connected then we will receive the BLUETOOTH_EVENT_RFCOMM_DISCONNECTED with socket
- * descriptor else no event will come. We will call this API only after the
- * bluetooth_rfcomm_listen_and_accept.
- * This is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_NOT_FOUND - Cannot find the proxy\n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * @param[in] int socket_fd
- *
- * @remark None
- * @see bluetooth_rfcomm_create_socket, bluetooth_rfcomm_listen_and_accept
- *
- @code
- void bt_event_callback(int event, bluetooth_event_param_t *param)
- {
- switch(event)
- {
- case BLUETOOTH_EVENT_RFCOMM_DISCONNECTED:
- {
- bluetooth_rfcomm_connection_t *discon_ind =
- (bluetooth_rfcomm_connection_t *)param->param_data;
-
- printf("\nDisconnected from FD %d", discon_ind->socket_fd);
- }
- }
- }
-
- ...
-
- int ret = 0;
- fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
- ret = bluetooth_rfcomm_listen_and_accept(fd, 1);
- ....
- ret = bluetooth_rfcomm_remove_socket(fd);
- @endcode
- */
-int bluetooth_rfcomm_remove_socket(int socket_fd);
-
-/**
- * @fn int bluetooth_rfcomm_server_disconnect(int socket_fd)
- * @brief Disconnect rfcomm connection
- *
- *
- * Disconnect a specific(device node fd) RFCOMM connection. This is a Synchronous call and there
- * is no cabbback events for this API. We have to provice the valid client fd to disconnect from the
- * remote server.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_NOT_CONNECTED - Not connected \n
- * @param[in] int socket_fd the sending socket fd
- *
- * @remark None
- *
- @code
-
- ret = bluetooth_rfcomm_server_disconnect(g_ret_fd);
- if (ret < 0)
- printf("Disconnection failed");
- else
- printf("Disconnection Success");
-
- @endcode
- */
-int bluetooth_rfcomm_server_disconnect(int socket_fd);
-
-/**
- * @fn int bluetooth_rfcomm_listen_and_accept(int socket_fd,int max_pending_connection)
- * @brief Rfcomm socket listen
- *
- *
- * This API make rfcomm socket listen and accept with socket. We will call this API immediatly
- * after the bluetooth_rfcomm_create_socket API.
- * This API listen for the incomming connection and once it receives a connection, it will give
- * BLUETOOTH_EVENT_RFCOMM_CONNECTED
- * event to the application. This is an Asynchronous API call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_CONNECTION_ERROR - Listen failed \n
-
- * @param[in] int socket_fd
- * @param[in] max pending connection.
- *
- * @remark None
- * @see bluetooth_rfcomm_create_socket
- *
- @code
- void bt_event_callback(int event, bluetooth_event_param_t* param)
- {
- switch(event)
- {
- case BLUETOOTH_EVENT_RFCOMM_CONNECTED:
- {
- bluetooth_rfcomm_connection_t *conn_ind =
- (bluetooth_rfcomm_connection_t *)param->param_data;
-
- printf("\nConnected from FD %d", conn_ind->socket_fd);
- }
- }
- }
-
- ...
-
- int ret = 0;
- fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
- ret = bluetooth_rfcomm_listen_and_accept(fd, 1);
-
- @endcode
- */
-int bluetooth_rfcomm_listen_and_accept(int socket_fd, int max_pending_connection);
-
-/**
- * @fn int bluetooth_rfcomm_listen(int socket_fd,int max_pending_connection)
- * @brief Rfcomm socket listen
- *
- *
- * This API make rfcomm socket listen and accept with socket. We will call this API immediatly
- * after the bluetooth_rfcomm_create_socket API.
- * This API listen for the incomming connection and once it receives a connection, it will give
- * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE
- * event to the application. This is an Asynchronous API call.
- *
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_CONNECTION_ERROR - Listen failed \n
-
- * @param[in] int socket_fd
- * @param[in] max pending connection.
- *
- * @remark None
- * @see bluetooth_rfcomm_create_socket
- *
- @code
- void bt_event_callback(int event, bluetooth_event_param_t* param)
- {
- switch(event)
- {
- case BLUETOOTH_EVENT_RFCOMM_AUTHORIZE:
- {
- char *name = (char *)param->param_data;
-
- printf("\nConnected from %s", name);
-
- bluetooth_rfcomm_accept_connection();
- }
- }
- }
-
- ...
-
- int ret = 0;
- fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
- ret = bluetooth_rfcomm_listen(fd, 1);
-
- @endcode
- */
-int bluetooth_rfcomm_listen(int socket_fd, int max_pending_connection);
-
-/**
- * @fn int bluetooth_rfcomm_accept_connection()
- * @brief Accepts the authorization request indicated by the event
- * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal error \n
- *
- * @param[in] the socket fd of the server
- * @param[out] the socket fd of the client
- *
- * @exception None
- * @remark None
- * @see bluetooth_rfcomm_reject_connection
- */
-int bluetooth_rfcomm_accept_connection(int server_fd, int *client_fd);
-
-/**
- * @fn int bluetooth_rfcomm_reject_connection()
- * @brief Rejects the authorization request indicated by the event
- * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal error \n
- *
- * @param[in] the socket fd of the server
- *
- * @exception None
- * @remark None
- * @see bluetooth_rfcomm_accept_connection
- */
-int bluetooth_rfcomm_reject_connection(int server_fd);
-
-/**
- * @fn gboolean bluetooth_rfcomm_is_server_uuid_available(const char *uuid)
- * @brief Informs whether rfcomm server uuid is available or not.
- *
- * This function is a synchronous call.
- *
- * @return TRUE - RFCOMM uuid is available \n
- * FALSE - RFCOMM uuid is not available \n
- *
- * @param[in] uuid UUID string
- *
- * @exception None
- *
- * @remark None
- */
-gboolean bluetooth_rfcomm_is_server_uuid_available(const char *uuid);
-
-/**
- * @fn int bluetooth_rfcomm_connect(const bluetooth_device_address_t *remote_bt_address,
- * const char *remote_uuid)
- * @brief Connect to the remote device rfcomm *
- *
- * Connect to a specific RFCOMM based service on a remote device UUID. This is a Async call. Once
- * the connection is successful callback BLUETOOTH_EVENT_RFCOMM_CONNECTED events is generated,
- * which contains the socket_fd, device role (RFCOMM_ROLE_SERVER/RFCOMM_ROLE_CLIENT), device addess
- * etc. The socket_fd can be further used to send the data. It better to do a sevice search before
- * initiating a connection.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_CONNECTION_BUSY - Connection in progress \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error\n
- * @param[in] bluetooth_device_address_t remote bt_address
- * @param[in] char remote uuid
- * @remark None
- * @see bluetooth_rfcomm_disconnect, bluetooth_rfcomm_write, bluetooth_search_service
- *
- @code
-
- void bt_event_callback(int event, bluetooth_event_param_t *param)
- {
- switch(event)
- {
- case BLUETOOTH_EVENT_SERVICE_SEARCHED:
- {
- if (param->result >= BLUETOOTH_ERROR_NONE)
- {
- bt_sdp_info_t *bt_sdp_info=param->param_data;
-
- printf("Dev add = %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- bt_sdp_info->device_addr.addr[0],
- bt_sdp_info->device_addr.addr[1],
- bt_sdp_info->device_addr.addr[2],
- bt_sdp_info->device_addr.addr[3],
- bt_sdp_info->device_addr.addr[4],
- bt_sdp_info->device_addr.addr[5]);
-
- printf("Supported service list:\n");
- for(i=0; i<bt_sdp_info->service_index; i++)
- printf("[%#x]\n",
- bt_sdp_info->service_list_array[i]);
-
- //Alternate method
- //ret = bluetooth_rfcomm_connect(bt_sdp_info->device_addr,
- //rfcomm_test_uuid);
- }
- break;
- }
- case BLUETOOTH_EVENT_RFCOMM_CONNECTED:
- {
- bluetooth_rfcomm_connection_t *conn_ind =
- (bluetooth_rfcomm_connection_t *)param->param_data;
-
- printf("\nConnected from FD %d, Role = %s", conn_ind->socket_fd,
- (conn_ind->device_role == RFCOMM_ROLE_SERVER) ?
- "SERVER" : "CLIENT");
- }
- }
- }
-
- bluetooth_device_address_t remote_address = {{0},};
- remote_address.addr[0] = 0x0; remote_address.addr[1] = 0x0A; remote_address.addr[2] = 0x3A;
- remote_address.addr[3]= 0x54; remote_address.addr[4] = 0x19; remote_address.addr[5]= 0x36;
- ret = bluetooth_search_service(&remote_address);
- if (ret < 0)
- printf("Seach failed, Reason = %d", ret);
- else
- printf("Search Success, Ret = %d", ret);
-
- ret = bluetooth_rfcomm_connect(&remote_address, rfcomm_test_uuid);
- if (ret < 0)
- printf("Connection failed, Reason = %d", ret);
- else
- printf("Connection Success, Ret = %d", ret);
-
- @endcode
- */
-int bluetooth_rfcomm_connect(const bluetooth_device_address_t *remote_bt_address,
- const char *remote_uuid);
-
-/**
- * @fn int bluetooth_rfcomm_disconnect(int socket_fd)
- * @brief Disconnect rfcomm connection
- *
- *
- * Disconnect a specific(device node fd) RFCOMM connection. This is a Synchronous call and there
- * is no cabbback events for this API. We have to provice the valid client fd to disconnect from the
- * remote server.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_NOT_CONNECTED - Not connected \n
- * @param[in] char remote bt_address
- *
- * @remark None
- * @see bluetooth_rfcomm_connect
- *
- @code
-
- ret = bluetooth_rfcomm_disconnect(g_ret_fd);
- if (ret < 0)
- printf("Disconnection failed");
- else
- printf("Disconnection Success");
-
- @endcode
- */
-
-int bluetooth_rfcomm_disconnect(int socket_fd);
-
-/**
- * @fn int bluetooth_rfcomm_write (int fd, const char *buff, int length)
- * @brief Write to rfcomm connection
- *
- *
- * This API is used to send the data over the rfcomm connection. This is a synchronous API. The same
- * API is used to send the data for server and the client.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_NOT_IN_OPERATION - The Fd is currently not in operation\n
- * @param[in] int fd
- * @param[in] const char *buff Data buffer to send
- * @param[in] int length Length of the data
- *
- * @remark None
- * @see bluetooth_rfcomm_connect
- *
- @code
- char *buff = "Test data 123456789"
- ret = bluetooth_rfcomm_write(g_ret_fd, buff, 15);
- if (ret < 0)
- printf("Send failed");
- else
- printf("Send success");
-
- @endcode
- */
-int bluetooth_rfcomm_write(int fd, const char *buf, int length);
-
-/**
- * @fn gboolean bluetooth_rfcomm_is_client_connected(void)
- * @brief Informs whether rfcomm client is connected.
- *
- * This function is a synchronous call.
- *
- * @return TRUE - RFCOMM client is connected \n
- * FALSE - RFCOMM client is not connected \n
- *
- * @exception None
- *
- * @remark None
- */
-gboolean bluetooth_rfcomm_is_client_connected(void);
-
-/**
- * @fn int bluetooth_network_activate_server(void)
- * @brief Activate the NAP (Network Access Point) service
- *
- * This function is a asynchronous call.
- * The activate server request is responded by BLUETOOTH_EVENT_NETWORK_SERVER_ACTIVATED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- *
- * @remark None
- * @see bluetooth_network_deactivate_server
- *
- */
-int bluetooth_network_activate_server(void);
-
-/**
- * @fn int bluetooth_network_deactivate_server(void)
- * @brief Deactivate the NAP (Network Access Point) service
- *
- * This function is a asynchronous call.
- * The deactivate server request is responded by BLUETOOTH_EVENT_NETWORK_SERVER_DEACTIVATED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- *
- * @remark None
- * @see bluetooth_network_activate_server
- *
- */
-int bluetooth_network_deactivate_server(void);
-
-/**
- * @fn int bluetooth_network_connect(const bluetooth_device_address_t *device_address,
- * bluetooth_network_role_t role,
- * char custom_uuid)
- * @brief Connect the network server in the peer
- *
- * This function is a asynchronous call.
- * The network connect request is responded by BLUETOOTH_EVENT_NETWORK_CONNECTED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- *
- * @exception None
- * @param[in] device_address This indicates an address of the device with which the pairing
- * should be initiated
- * @param[in] role The role to connect. PANU / GN / NAP / CUSTOM. If use the CUSTOM value,
- * need to use the third parameter.
- * @param[in] custom_uuid If use the CUSTOM value in second parameter, use this parameter to
- * connect. UUID string
- * @remark None
- * @see bluetooth_network_disconnect
- */
-int bluetooth_network_connect(const bluetooth_device_address_t *device_address,
- bluetooth_network_role_t role, char *custom_uuid);
-
-/**
- * @fn int bluetooth_network_disconnect(const bluetooth_device_address_t *device_address,
- * bluetooth_network_role_t role,
- * char *custom_uuid)
- * @brief Connect the network server in the peer
- *
- * This function is a asynchronous call.
- * The network disconnect request is responded by BLUETOOTH_EVENT_NETWORK_CONNECTED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- *
- * @exception None
- * @param[in] device_address This indicates an address of the device with which the pairing
- * should be initiated
- * @remark None
- * @see bluetooth_network_connect
- */
-int bluetooth_network_disconnect(const bluetooth_device_address_t *device_address);
-
-/*HDP - API's*/
-
-/**
- * @fn int bluetooth_hdp_activate(unsigned short data_type,
- * bt_hdp_role_type_t role,
- * bt_hdp_qos_type_t channel_type,
- * char **app_handle)
- * @brief Activate the HDP service for a particular data type
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- *
- * @exception None
- * @param[in] data_type The data type against corresponding service
- * @param[in] role The role of HDP. HDP_ROLE_SOURCE/HDP_ROLE_SINK.
- * @param[in] channel_type The QOS type for the channel.
- * HDP_QOS_RELIABLE/HDP_QOS_STREAMING/HDP_QOS_ANY.
- * For role = HDP_ROLE_SINK, the channel_type
- * should be HDP_QOS_ANY.
- * @param[out] app_handle The application handler against corresponding service
- * @remark None
- * @see bluetooth_hdp_deactivate
- */
-int bluetooth_hdp_activate(unsigned short data_type,
- bt_hdp_role_type_t role,
- bt_hdp_qos_type_t channel_type,
- char **app_handle);
-/**
- * @fn int bluetooth_hdp_deactivate(const char *app_handle)
- * @brief Deactivate the HDP service for a particular service using the handler
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- *
- * @exception None
- * @param[in] app_handle The application handler against corresponding service
- * @remark None
- * @see bluetooth_hdp_deactivate
- */
-int bluetooth_hdp_deactivate(const char *app_handle);
-
-/**
- * @fn int bluetooth_hdp_send_data(unsigned int channel_id,
- * const char *buffer, unsigned int size)
- * @brief Send data to the remote HDP device
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_NOT_IN_OPERATION - FD is invalid \n
- *
- * @exception None
- * @param[in] channel_id The channel id for the connection.
- * @param[in] buffer The pdu buffer.
- * @param[in] size Size of the buffer.
- * @remark None
- * @see bluetooth_hdp_connect
- */
-int bluetooth_hdp_send_data(unsigned int channel_id,
- const char *buffer, unsigned int size);
-/**
- * @fn int bluetooth_hdp_connect(const char *app_handle,
- * bt_hdp_qos_type_t channel_type,
- * const bluetooth_device_address_t *device_address)
- * @brief Connect to the remote device(Mainly used by source)
- *
- * This function is a asynchronous call.
- * The HDP activate is responded by BLUETOOTH_EVENT_HDP_CONNECTED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_MEMORY_ALLOCATION -Memory allocation failed \n
- *
- * @exception None
- * @param[in] app_handle The application handler against corresponding service
- * @param[in] channel_type The QOS type for the channel.
- * HDP_QOS_RELIABLE/HDP_QOS_STREAMING.
- * @param[in] device_address The remote device Bd address.
- *
- * @remark None
- * @see bluetooth_hdp_disconnect
- */
-int bluetooth_hdp_connect(const char *app_handle,
- bt_hdp_qos_type_t channel_type,
- const bluetooth_device_address_t *device_address);
-/**
- * @fn int bluetooth_hdp_disconnect(unsigned int channel_id,
- * const bluetooth_device_address_t *device_address)
- * @brief Disconnect from the remote device(Mainly used by source)
- *
- * This function is a asynchronous call.
- * The HDP activate is responded by BLUETOOTH_EVENT_HDP_DISCONNECTED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_MEMORY_ALLOCATION -Memory allocation failed \n
- *
- * @exception None
- * @param[in] channel_id The channel id for the connection.
- * @param[in] device_address The remote device Bd address.
- *
- * @remark None
- * @see bluetooth_hdp_connect
- */
-int bluetooth_hdp_disconnect(unsigned int channel_id,
- const bluetooth_device_address_t *device_address);
-
-
-/**
- * @fn int bluetooth_opc_init(void)
- * @brief Initialize OPP client.
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_ACCESS_DENIED -Memory allocation failed \n
- *
- * @exception None
- *
- * @remark None
- * @see bluetooth_opc_deinit
- */
-int bluetooth_opc_init(void);
-
-/**
- * @fn int bluetooth_opc_deinit(void)
- * @brief Deinitialize OPP client.
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_ACCESS_DENIED -Memory allocation failed \n
- *
- * @exception None
- *
- * @remark None
- * @see bluetooth_opc_init
- */
-
- int bluetooth_opc_deinit(void);
-
-/**
- * @fn int bluetooth_opc_push_files(bluetooth_device_address_t *remote_address,
- char **file_name_array)
- * @brief Send multiple files to a remote device.
- *
- * This function is a asynchronous call.
- * This api is responded by BLUETOOTH_EVENT_OPC_CONNECTED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_IN_PROGRESS -Already one push in progress \n
- * BLUETOOTH_ERROR_ACCESS_DENIED - Not allowed by MDM policy \n
- *
- * @exception None
- * @param[in] device_address The remote device Bd address.
- * @param[in] file_name_array Array of filepaths to be sent.
- *
- * @remark None
- * @see bluetooth_opc_cancel_push
- */
-
-int bluetooth_opc_push_files(bluetooth_device_address_t *remote_address,
- char **file_name_array);
-
-/**
- * @fn int bluetooth_opc_cancel_push(void)
- * @brief Cancels the ongoing file push.
- *
- * This function is a asynchronous call.
- * This api is responded with either BLUETOOTH_EVENT_OPC_CONNECTED or
- * BLUETOOTH_EVENT_OPC_TRANSFER_COMPLETED event.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_ACCESS_DENIED - No push in progress \n
- *
- * @exception None
- *
- * @remark None
- * @see bluetooth_opc_push_files
- */
-
-int bluetooth_opc_cancel_push(void);
-
-/**
- * @fn gboolean bluetooth_opc_session_is_exist(void)
- * @brief Informs whether opc session exists or not.
- *
- * This function is a synchronous call.
- *
- * @return TRUE - OPC session exists \n
- * FALSE - OPC session does not exist \n
- *
- * @exception None
- *
- * @remark None
- * @see None
- */
-
-gboolean bluetooth_opc_session_is_exist(void);
-
-/**
- * @fn int bluetooth_opc_is_sending(gboolean *is_sending)
- * @brief Informs whether opc session exists or not.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- * BLUETOOTH_ERROR_INTERNAL \n
- *
- * @exception None
- * @param[out] is_sending The sending status: (@c TRUE = in sending , @c false = not in sending)
- *
- * @remark None
- * @see None
- */
-int bluetooth_opc_is_sending(gboolean *is_sending);
-
-/**
- * @fn int bluetooth_obex_server_init(const char *dst_path)
- * @brief Initialize OPP and FTP server.
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_AGENT_ALREADY_EXIST - Obex agent already registered \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- *
- * @exception None
- * @param[in] dst_path OPS destination file path.
- * @remark None
- * @see bluetooth_obex_server_deinit
- */
-int bluetooth_obex_server_init(const char *dst_path);
-
-
-/**
- * @fn int bluetooth_obex_server_deinit(void)
- * @brief Deinitialize OPP and FTP server.
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- *
- * @exception None
- *
- * @remark None
- * @see bluetooth_obex_server_init
- */
-int bluetooth_obex_server_deinit(void);
-
-
-/**
- * @fn gboolean bluetooth_obex_server_is_activated(void)
- * @brief Informs whether obex server is activated or not.
- *
- * This function is a synchronous call.
- *
- * @return TRUE - OBEX server is activated \n
- * FALSE - OBEX server is not activated \n
- *
- * @exception None
- *
- * @remark None
- */
-
-gboolean bluetooth_obex_server_is_activated(void);
-
-
-/**
- * @fn int bluetooth_obex_server_init_without_agent(const char *dst_path)
- * @brief Initialize OPP and FTP server without the conneciton authorization of the agent
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_AGENT_ALREADY_EXIST - Obex agent already registered \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- *
- *
- * @exception None
- * @param[in] dst_path OPS destination file path.
- * @remark None
- * @see bluetooth_obex_server_deinit_without_agent
- */
-int bluetooth_obex_server_init_without_agent(const char *dst_path);
-
-
-/**
- * @fn int bluetooth_obex_server_deinit_without_agent(void)
- * @brief Deinitialize OPP and FTP server without the conneciton authorization of the agent
- *
- * This function is a synchronous call.
- * No event corresponding to this api
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- *
- * @exception None
- *
- * @remark None
- * @see bluetooth_obex_server_init_without_agent
- */
-int bluetooth_obex_server_deinit_without_agent(void);
-
-
-/**
- * @fn int bluetooth_obex_server_accept_connection(void)
- * @brief Accepts the authorization request indicated by the event
- * BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_INTERNAL - Internal error \n
- *
- * @exception None
- * @remark None
- * @see bluetooth_obex_server_reject_authorize
- */
-int bluetooth_obex_server_accept_connection(void);
-
-
-/**
- * @fn int bluetooth_obex_server_reject_connection(void)
- * @brief Rejects the authorization request indicated by the event
- * BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_INTERNAL - Internal error \n
- *
- * @exception None
- * @remark None
- * @see bluetooth_obex_server_reject_authorize
- */
-int bluetooth_obex_server_reject_connection(void);
-
-
-/**
- * @fn int bluetooth_obex_server_accept_authorize(const char *filename)
- * @brief Accepts the authorization request indicated by the event
- * BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE.
- *
- * This function is a asynchronous call.
- * This api will be responded with the event BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_STARTED.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- *
- * @exception None
- * @param[in] filename Authorized filename.
-
- * @remark None
- * @see bluetooth_obex_server_reject_authorize
- */
-
-int bluetooth_obex_server_accept_authorize(const char *filename);
-
-/**
- * @fn int bluetooth_obex_server_reject_authorize(void)
- * @brief Reject the authorization request indicated by the event
- * BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE.
- *
- * This function is a asynchronous call.
- * No event for this api..
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- *
- * @exception None
-
- * @remark None
- * @see bluetooth_obex_server_accept_authorize
- */
-
-int bluetooth_obex_server_reject_authorize(void);
-
-/**
- * @fn int bluetooth_obex_server_set_destination_path(const char *dst_path)
- * @brief Set the OPS destination file path..
- *
- * This function is a asynchronous call.
- * No event for this api..
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid Param \n
- *
- * @exception None
- * @param[in] dst_path OPS destination file path.
-
- * @remark None
- * @see None
- */
-
-int bluetooth_obex_server_set_destination_path(const char *dst_path);
-
-/**
- * @fn int bluetooth_obex_server_set_root(const char *root)
- * @brief Set the FTS root folder..
- *
- * This function is a asynchronous call.
- * No event for this api..
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
- * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
- * BLUETOOTH_ERROR_ACCESS_DENIED - Operation not allowed \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- *
- * @exception None
- * @param[in] root FTS root folder.
-
- * @remark None
- * @see None
- */
-
-int bluetooth_obex_server_set_root(const char *root);
-
-/**
- * @fn int bluetooth_obex_server_cancel_transfer(int transfer_id)
- * @brief Cancel the transfer on server
- *
- * This function is an asynchronous call.
- * If the function call that cancels transfer is successful, the application would receive
- * BLUETOOTH_EVENT_TRANSFER_COMPLETED event through registered callback
- * function with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure
- * the error code will be BLUETOOTH_ERROR_NONE
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- * BLUETOOTH_ERROR_INTERNAL - internal error (proxy does not exist) \n
- * BLUETOOTH_ERROR_NOT_FOUND - The transfer is not found \n
- *
- * @exception None
- * @param[in] transfer_id transfer ID
-
- * @remark None
- * @see None
- */
-int bluetooth_obex_server_cancel_transfer(int transfer_id);
-
-
-/**
- * @fn int bluetooth_obex_server_cancel_all_transfers(void)
- * @brief Cancel the transfer on server
- *
- * This function is an asynchronous call.
- * If the function call that cancels transfer is successful, the application would receive
- * BLUETOOTH_EVENT_TRANSFER_COMPLETED event through registered callback
- * function with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure
- * the error code will be BLUETOOTH_ERROR_NONE
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
- * BLUETOOTH_ERROR_INTERNAL - internal error (proxy does not exist) \n
- * BLUETOOTH_ERROR_NOT_FOUND - The transfer is not found \n
- *
- * @exception None
- *
- * @remark None
- * @see None
- */
-int bluetooth_obex_server_cancel_all_transfers(void);
-
-
-/**
- * @fn int bluetooth_obex_server_is_receiving(gboolean *is_receiving)
- * @brief Informs whether obex server is receiving or not.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
- * BLUETOOTH_ERROR_INTERNAL \n
- *
- * @exception None
- * @param[out] is_receiving The receiving status: (@c TRUE = in receiving , @c false = not in receiving)
- *
- * @remark None
- * @see None
- */
-int bluetooth_obex_server_is_receiving(gboolean *is_receiving);
-
-
-/**
- * @fn int bluetooth_oob_read_local_data(bt_oob_data_t *local_oob_data)
- * @brief Read the local Hash and Randmizer.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- *
- * @exception None
- * @param[in] None.
- * @param[out] local_oob_data - Pointer to the local OOB data
- *
- * @remark None
- * @see None
- */
-
-int bluetooth_oob_read_local_data(bt_oob_data_t *local_oob_data);
-
-
-/**
- * @fn int bluetooth_oob_add_remote_data(
- * const bluetooth_device_address_t *remote_device_address,
- * bt_oob_data_t *oob_data)
- * @brief Add/updated the remote device Hash and Randmizer.
- *
- * This function is a synchronous call.
- * No event for this api..
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- *
- * @exception None
- * @param[in] remote_device_address - Remote device address
- * remote_oob_data - Ponter to Hash and Randomizer oob data structure
- *
- * @remark None
- * @see None
- */
-
-int bluetooth_oob_add_remote_data(
- const bluetooth_device_address_t *remote_device_address,
- bt_oob_data_t *remote_oob_data);
-
-
-/**
- * @fn int bluetooth_oob_remove_remote_data(
- * const bluetooth_device_address_t *remote_device_address)
- * @brief Delete the Hash and Randomizer w.r.t the remote device address.
- *
- * This function is a synchronous call.
- * No event for this api..
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- *
- * @exception None
- * @param[in] remote_device_address - Remote device address
- *
- * @remark None
- * @see None
- */
-
-int bluetooth_oob_remove_remote_data(
- const bluetooth_device_address_t *remote_device_address);
-
-/**
- * @fn int bluetooth_gatt_get_primary_services(const bluetooth_device_address_t *address,
- * bt_gatt_handle_info_t *prim_svc);
- *
- * @brief Gets the GATT based primary services handle supported by remote device
- *
- * This function is a synchronous call.
- * The output parameter needs to be freed by calling bluetooth_gatt_free_primary_services()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] address - Remote device address
- * @param[out] prim_svc - Structure containing remote service count and handle list.
- *
- * @remark None
- * @see bluetooth_gatt_free_primary_services()
- */
-int bluetooth_gatt_get_primary_services(const bluetooth_device_address_t *address,
- bt_gatt_handle_info_t *prim_svc);
-
-/**
- * @fn int bluetooth_gatt_discover_service_characteristics(const char *service_handle)
- *
- * @brief Discovers the characteristics of GATT based service of remote device
- *
- * This function is an asynchronous call.
- * This API is responded with BLUETOOTH_EVENT_GATT_SVC_CHAR_DISCOVERED
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] service_handle - Handle for remote service.
- *
- * @remark None
- * @see None
- */
-int bluetooth_gatt_discover_service_characteristics(const char *service_handle);
-
-/**
- * @fn int bluetooth_gatt_get_service_property(const char *service_handle,
- * bt_gatt_service_property_t *service);
- *
- * @brief Gets the properties of GATT based service of remote device
- *
- * This function is a synchronous call.
- * The output parameter needs to be freed by calling bluetooth_gatt_free_primary_services()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] service_handle - Handle for remote service.
- * @param[out] service - Structure containing remote service property.
- *
- * @remark None
- * @see bluetooth_gatt_free_service_property()
- */
-int bluetooth_gatt_get_service_property(const char *service_handle,
- bt_gatt_service_property_t *service);
-
-/**
- * @fn int bluetooth_gatt_watch_characteristics(const char *service_handle)
- *
- * @brief Register to GATT based service to receive value change notification/indication.
- *
- * This function is a synchronous call.
- * No event for this api.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] service_handle - Handle for remote service.
- *
- * @remark None
- * @see None
- */
-int bluetooth_gatt_watch_characteristics(const char *service_handle);
-
-/**
- * @fn int bluetooth_gatt_unwatch_characteristics(const char *service_handle)
- *
- * @brief Unregister GATT based service to receive value change notification/indication.
- *
- * This function is a synchronous call.
- * No event for this api.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] service_handle - Handle for remote service.
- *
- * @remark None
- * @see None
- */
-int bluetooth_gatt_unwatch_characteristics(const char *service_handle);
-
-/**
- * @fn int bluetooth_gatt_get_characteristics_property(const char *char_handle,
- * bt_gatt_char_property_t *characteristic);
- *
- * @brief Provides characteristic value along with properties.
- *
- * This function is a synchronous call.
- * The output parameter needs to be freed by calling bluetooth_gatt_free_char_property()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] char_handle - Handle for Characteristic property.
- * @param[out] characteristic - Structure containing remote characteristic property.
- *
- * @remark None
- * @see bluetooth_gatt_free_char_property()
- */
-int bluetooth_gatt_get_characteristics_property(const char *char_handle,
- bt_gatt_char_property_t *characteristic);
-
-/**
- * @fn int bluetooth_gatt_set_characteristics_value(const char *char_handle,
- * const guint8 *value, int length)
- *
- * @brief Set characteristic value.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] char_handle - Handle for Characteristic property.
- * @param[in] value - New value to set for characteristic property.
- * @param[in] length - Length of the value to be set.
- *
- * @remark None
- * @see None
- */
-int bluetooth_gatt_set_characteristics_value(const char *char_handle,
- const guint8 *value, int length);
-
-/**
- * @fn int bluetooth_gatt_get_service_from_uuid(bluetooth_device_address_t *address,
- * const char *service_uuid,
- * bt_gatt_service_property_t *service)
- *
- * @brief Gets the service property from a device based on a particular uuid
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] address - BD address of the remote device
- * @param[in] service_uuid - uuid of the service.
- * @param[out] service - Structure containing the service property.
- *
- * @remark None
- * @see None
- */
- int bluetooth_gatt_get_service_from_uuid(bluetooth_device_address_t *address,
- const char *service_uuid,
- bt_gatt_service_property_t *service);
-
-/**
- * @fn int bluetooth_gatt_get_char_from_uuid(const char *service_handle,
- * const char *char_uuid)
- *
- * @brief Gets the characteristic property from a service based on a particular char uuid
- *
- * This function is an asynchronous call.
- * This API is responded with BLUETOOTH_EVENT_GATT_GET_CHAR_FROM_UUID
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
- *
- * @exception None
- * @param[in] service_handle - Service handle.
- * @param[in] uuid - Characteristic uuid.
- *
- * @remark None
- * @see None
- */
-int bluetooth_gatt_get_char_from_uuid(const char *service_handle,
- const char *char_uuid);
-
-/**
- * @fn int bluetooth_gatt_free_primary_services(bt_gatt_handle_info_t *prim_svc);
- *
- * @brief Releases the memory allocated by bluetooth_gatt_get_primary_services()
- *
- * This function is a synchronous call.
- * The input parameter is obtained by calling bluetooth_gatt_get_primary_services()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- *
- * @exception None
- * @param[in] prim_svc - GATT handle info structure
- *
- * @remark None
- * @see bluetooth_gatt_get_primary_services()
- */
-int bluetooth_gatt_free_primary_services(bt_gatt_handle_info_t *prim_svc);
-
-/**
- * @fn int bluetooth_gatt_free_service_property(bt_gatt_service_property_t *svc_pty);
- *
- * @brief Releases the memory allocated by bluetooth_gatt_get_service_property()
- *
- * This function is a synchronous call.
- * The input parameter is obtained by calling bluetooth_gatt_get_service_property()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- *
- * @exception None
- * @param[in] svc_pty - GATT service property structure.
- *
- * @remark None
- * @see bluetooth_gatt_get_service_property()
- */
-int bluetooth_gatt_free_service_property(bt_gatt_service_property_t *svc_pty);
-
-/**
- * @fn int bluetooth_gatt_free_char_property(bt_gatt_char_property_t *char_pty);
- *
- * @brief Provides characteristic value along with properties.
- *
- * This function is a synchronous call.
- * The input parameter is obtained by calling bluetooth_gatt_get_characteristics_property()
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
- *
- * @exception None
- * @param[in] char_pty - GATT characteristics property structure.
- *
- * @remark None
- * @see bluetooth_gatt_get_characteristics_property()
- */
- int bluetooth_gatt_free_char_property(bt_gatt_char_property_t *char_pty);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-#endif /* _BLUETOOTH_API_H_*/
projects / platform / core / connectivity / bluetooth-frwk.git / commitdiff