stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE);
}
+static void stm32_usart_tc_interrupt_enable(struct uart_port *port)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TCIE);
+}
+
static void stm32_usart_rx_dma_complete(void *arg)
{
struct uart_port *port = arg;
stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
}
+static void stm32_usart_tc_interrupt_disable(struct uart_port *port)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TCIE);
+}
+
static void stm32_usart_rs485_rts_enable(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
u32 isr;
int ret;
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED) {
+ stm32_port->txdone = false;
+ stm32_usart_tc_interrupt_disable(port);
+ stm32_usart_rs485_rts_enable(port);
+ }
+
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit)) {
stm32_usart_tx_interrupt_disable(port);
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED) {
+ stm32_port->txdone = true;
+ stm32_usart_tc_interrupt_enable(port);
+ }
+ }
}
static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
sr = readl_relaxed(port->membase + ofs->isr);
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED &&
+ (sr & USART_SR_TC)) {
+ stm32_usart_tc_interrupt_disable(port);
+ stm32_usart_rs485_rts_disable(port);
+ }
+
if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
writel_relaxed(USART_ICR_RTOCF,
port->membase + ofs->icr);
{
struct circ_buf *xmit = &port->state->xmit;
- if (uart_circ_empty(xmit) && !port->x_char)
+ if (uart_circ_empty(xmit) && !port->x_char) {
+ stm32_usart_rs485_rts_disable(port);
return;
+ }
stm32_usart_rs485_rts_enable(port);