struct eeh_ops {
char *name;
int (*init)(void);
+ void* (*of_probe)(struct device_node *dn, void *flag);
+ void* (*dev_probe)(struct pci_dev *dev, void *flag);
int (*set_option)(struct eeh_pe *pe, int option);
int (*get_pe_addr)(struct eeh_pe *pe);
int (*get_state)(struct eeh_pe *pe, int *state);
extern struct eeh_ops *eeh_ops;
extern int eeh_subsystem_enabled;
extern struct mutex eeh_mutex;
+extern int eeh_probe_mode;
+
+#define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */
+#define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */
+
+static inline void eeh_probe_mode_set(int flag)
+{
+ eeh_probe_mode = flag;
+}
+
+static inline int eeh_probe_mode_devtree(void)
+{
+ return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE);
+}
+
+static inline int eeh_probe_mode_dev(void)
+{
+ return (eeh_probe_mode == EEH_PROBE_MODE_DEV);
+}
static inline void eeh_lock(void)
{
void eeh_slot_error_detail(struct eeh_pe *pe, int severity);
int eeh_pci_enable(struct eeh_pe *pe, int function);
int eeh_reset_pe(struct eeh_pe *);
+void eeh_save_bars(struct eeh_dev *edev);
int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
void eeh_pe_state_mark(struct eeh_pe *pe, int state);
int eeh_subsystem_enabled;
EXPORT_SYMBOL(eeh_subsystem_enabled);
+/*
+ * EEH probe mode support. The intention is to support multiple
+ * platforms for EEH. Some platforms like pSeries do PCI emunation
+ * based on device tree. However, other platforms like powernv probe
+ * PCI devices from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for particular
+ * OF node or PCI device so that the corresponding PE would be created
+ * there.
+ */
+int eeh_probe_mode;
+
/* Global EEH mutex */
DEFINE_MUTEX(eeh_mutex);
* PCI devices are added individually; but, for the restore,
* an entire slot is reset at a time.
*/
-static void eeh_save_bars(struct eeh_dev *edev)
+void eeh_save_bars(struct eeh_dev *edev)
{
int i;
struct device_node *dn;
}
/**
- * eeh_early_enable - Early enable EEH on the indicated device
- * @dn: device node
- * @data: BUID
- *
- * Enable EEH functionality on the specified PCI device. The function
- * is expected to be called before real PCI probing is done. However,
- * the PHBs have been initialized at this point.
- */
-static void *eeh_early_enable(struct device_node *dn, void *data)
-{
- int ret;
- const u32 *class_code = of_get_property(dn, "class-code", NULL);
- const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
- const u32 *device_id = of_get_property(dn, "device-id", NULL);
- const u32 *regs;
- int enable;
- struct eeh_dev *edev = of_node_to_eeh_dev(dn);
- struct eeh_pe pe;
-
- edev->class_code = 0;
- edev->mode = 0;
-
- if (!of_device_is_available(dn))
- return NULL;
-
- /* Ignore bad nodes. */
- if (!class_code || !vendor_id || !device_id)
- return NULL;
-
- /* There is nothing to check on PCI to ISA bridges */
- if (dn->type && !strcmp(dn->type, "isa"))
- return NULL;
- edev->class_code = *class_code;
-
- /* Ok... see if this device supports EEH. Some do, some don't,
- * and the only way to find out is to check each and every one.
- */
- regs = of_get_property(dn, "reg", NULL);
- if (regs) {
- /* Initialize the fake PE */
- memset(&pe, 0, sizeof(struct eeh_pe));
- pe.phb = edev->phb;
- pe.config_addr = regs[0];
-
- /* First register entry is addr (00BBSS00) */
- /* Try to enable eeh */
- ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
-
- enable = 0;
- if (ret == 0) {
- edev->config_addr = regs[0];
-
- /* If the newer, better, ibm,get-config-addr-info is supported,
- * then use that instead.
- */
- edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
- pe.addr = edev->pe_config_addr;
-
- /* Some older systems (Power4) allow the
- * ibm,set-eeh-option call to succeed even on nodes
- * where EEH is not supported. Verify support
- * explicitly.
- */
- ret = eeh_ops->get_state(&pe, NULL);
- if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
- enable = 1;
- }
-
- if (enable) {
- eeh_subsystem_enabled = 1;
-
- eeh_add_to_parent_pe(edev);
-
- pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n",
- dn->full_name, edev->config_addr,
- edev->pe_config_addr);
- } else {
-
- /* This device doesn't support EEH, but it may have an
- * EEH parent, in which case we mark it as supported.
- */
- if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
- of_node_to_eeh_dev(dn->parent)->pe) {
- /* Parent supports EEH. */
- edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
- edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
-
- eeh_add_to_parent_pe(edev);
-
- return NULL;
- }
- }
- } else {
- printk(KERN_WARNING "EEH: %s: unable to get reg property.\n",
- dn->full_name);
- }
-
- eeh_save_bars(edev);
- return NULL;
-}
-
-/**
* eeh_ops_register - Register platform dependent EEH operations
* @ops: platform dependent EEH operations
*
raw_spin_lock_init(&confirm_error_lock);
/* Enable EEH for all adapters */
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- phb = hose->dn;
- traverse_pci_devices(phb, eeh_early_enable, NULL);
+ if (eeh_probe_mode_devtree()) {
+ list_for_each_entry_safe(hose, tmp,
+ &hose_list, list_node) {
+ phb = hose->dn;
+ traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
+ }
}
if (eeh_subsystem_enabled)
- printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n");
+ pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
else
- printk(KERN_WARNING "EEH: No capable adapters found\n");
+ pr_warning("EEH: No capable adapters found\n");
return ret;
}
if (NULL == phb || 0 == phb->buid)
return;
- eeh_early_enable(dn, NULL);
+ /* FIXME: hotplug support on POWERNV */
+ eeh_ops->of_probe(dn, NULL);
}
/**
eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
}
+ /* Set EEH probe mode */
+ eeh_probe_mode_set(EEH_PROBE_MODE_DEVTREE);
+
return 0;
}
/**
+ * pseries_eeh_of_probe - EEH probe on the given device
+ * @dn: OF node
+ * @flag: Unused
+ *
+ * When EEH module is installed during system boot, all PCI devices
+ * are checked one by one to see if it supports EEH. The function
+ * is introduced for the purpose.
+ */
+static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+{
+ struct eeh_dev *edev;
+ struct eeh_pe pe;
+ const u32 *class_code, *vendor_id, *device_id;
+ const u32 *regs;
+ int enable = 0;
+ int ret;
+
+ /* Retrieve OF node and eeh device */
+ edev = of_node_to_eeh_dev(dn);
+ if (!of_device_is_available(dn))
+ return NULL;
+
+ /* Retrieve class/vendor/device IDs */
+ class_code = of_get_property(dn, "class-code", NULL);
+ vendor_id = of_get_property(dn, "vendor-id", NULL);
+ device_id = of_get_property(dn, "device-id", NULL);
+
+ /* Skip for bad OF node or PCI-ISA bridge */
+ if (!class_code || !vendor_id || !device_id)
+ return NULL;
+ if (dn->type && !strcmp(dn->type, "isa"))
+ return NULL;
+
+ /* Update class code and mode of eeh device */
+ edev->class_code = *class_code;
+ edev->mode = 0;
+
+ /* Retrieve the device address */
+ regs = of_get_property(dn, "reg", NULL);
+ if (!regs) {
+ pr_warning("%s: OF node property %s::reg not found\n",
+ __func__, dn->full_name);
+ return NULL;
+ }
+
+ /* Initialize the fake PE */
+ memset(&pe, 0, sizeof(struct eeh_pe));
+ pe.phb = edev->phb;
+ pe.config_addr = regs[0];
+
+ /* Enable EEH on the device */
+ ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+ if (!ret) {
+ edev->config_addr = regs[0];
+ /* Retrieve PE address */
+ edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+ pe.addr = edev->pe_config_addr;
+
+ /* Some older systems (Power4) allow the ibm,set-eeh-option
+ * call to succeed even on nodes where EEH is not supported.
+ * Verify support explicitly.
+ */
+ ret = eeh_ops->get_state(&pe, NULL);
+ if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
+ enable = 1;
+
+ if (enable) {
+ eeh_subsystem_enabled = 1;
+ eeh_add_to_parent_pe(edev);
+
+ pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
+ __func__, dn->full_name, pe.phb->global_number,
+ pe.addr, pe.config_addr);
+ } else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+ (of_node_to_eeh_dev(dn->parent))->pe) {
+ /* This device doesn't support EEH, but it may have an
+ * EEH parent, in which case we mark it as supported.
+ */
+ edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
+ edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+ eeh_add_to_parent_pe(edev);
+ }
+ }
+
+ /* Save memory bars */
+ eeh_save_bars(edev);
+
+ return NULL;
+}
+
+/**
* pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
* @pe: EEH PE
* @option: operation to be issued
static struct eeh_ops pseries_eeh_ops = {
.name = "pseries",
.init = pseries_eeh_init,
+ .of_probe = pseries_eeh_of_probe,
+ .dev_probe = NULL,
.set_option = pseries_eeh_set_option,
.get_pe_addr = pseries_eeh_get_pe_addr,
.get_state = pseries_eeh_get_state,