select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the Texas Instruments
- TPS80031/ TPS80032 Fully Integrated Power Management with Power
- Path and Battery Charger. The device provides five configurable
- step-down converters, 11 general purpose LDOs, USB OTG Module,
- ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
- Power Path from USB, 32K clock generator.
+ Say yes here to support for Maxim Semiconductor MAX8907. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device; additional drivers must be enabled in order
+ to use the functionality of the device.
- config MENELAUS
- bool "Texas Instruments TWL92330/Menelaus PM chip"
- depends on I2C=y && ARCH_OMAP2
+ config MFD_MAX8925
+ bool "Maxim Semiconductor MAX8925 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
help
- If you say yes here you get support for the Texas Instruments
- TWL92330/Menelaus Power Management chip. This include voltage
- regulators, Dual slot memory card transceivers, real-time clock
- and other features that are often used in portable devices like
- cell phones and PDAs.
+ Say yes here to support for Maxim Semiconductor MAX8925. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device, additional drivers must be enabled in order
+ to use the functionality of the device.
- config TWL4030_CORE
- bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
+ config MFD_MAX8997
+ bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
select IRQ_DOMAIN
- select REGMAP_I2C
help
- Say yes here if you have TWL4030 / TWL6030 family chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
-
- These multi-function chips are found on many OMAP2 and OMAP3
- boards, providing power management, RTC, GPIO, keypad, a
- high speed USB OTG transceiver, an audio codec (on most
- versions) and many other features.
+ Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
+ MUIC controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
- config TWL4030_MADC
- tristate "Texas Instruments TWL4030 MADC"
- depends on TWL4030_CORE
+ config MFD_MAX8998
+ bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
help
- This driver provides support for triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
-
- This driver can be built as a module. If so it will be
- named twl4030-madc
+ Say yes here to support for Maxim Semiconductor MAX8998 and
+ National Semiconductor LP3974. This is a Power Management IC.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
- config TWL4030_POWER
- bool "Support power resources on TWL4030 family chips"
- depends on TWL4030_CORE && ARM
+ config EZX_PCAP
+ bool "Motorola EZXPCAP Support"
+ depends on GENERIC_HARDIRQS && SPI_MASTER
help
- Say yes here if you want to use the power resources on the
- TWL4030 family chips. Most of these resources are regulators,
- which have a separate driver; some are control signals, such
- as clock request handshaking.
-
- This driver uses board-specific data to initialize the resources
- and load scripts controlling which resources are switched off/on
- or reset when a sleep, wakeup or warm reset event occurs.
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
- config MFD_TWL4030_AUDIO
- bool
- depends on TWL4030_CORE && GENERIC_HARDIRQS
+ config MFD_VIPERBOARD
+ tristate "Nano River Technologies Viperboard"
select MFD_CORE
+ depends on USB && GENERIC_HARDIRQS
default n
+ help
+ Say yes here if you want support for Nano River Technologies
+ Viperboard.
+ There are mfd cell drivers available for i2c master, adc and
+ both gpios found on the board. The spi part does not yet
+ have a driver.
+ You need to select the mfd cell drivers separately.
+ The drivers do not support all features the board exposes.
- config TWL6040_CORE
- bool "Support for TWL6040 audio codec"
- depends on I2C=y && GENERIC_HARDIRQS
+ config MFD_RETU
+ tristate "Nokia Retu and Tahvo multi-function device"
select MFD_CORE
- select REGMAP_I2C
+ depends on I2C && GENERIC_HARDIRQS
select REGMAP_IRQ
- default n
help
- Say yes here if you want support for Texas Instruments TWL6040 audio
- codec.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device (audio, vibra).
+ Retu and Tahvo are a multi-function devices found on Nokia
+ Internet Tablets (770, N800 and N810).
- config MFD_STMPE
- bool "Support STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
- select MFD_CORE
+ config MFD_PCF50633
+ tristate "NXP PCF50633"
+ depends on I2C
+ select REGMAP_I2C
help
- Support for the STMPE family of I/O Expanders from
- STMicroelectronics.
-
- Currently supported devices are:
-
- STMPE811: GPIO, Touchscreen
- STMPE1601: GPIO, Keypad
- STMPE2401: GPIO, Keypad
- STMPE2403: GPIO, Keypad
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device. Currently available sub drivers are:
-
- GPIO: stmpe-gpio
- Keypad: stmpe-keypad
- Touchscreen: stmpe-ts
-
- menu "STMPE Interface Drivers"
- depends on MFD_STMPE
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
- config STMPE_I2C
- bool "STMPE I2C Inteface"
- depends on I2C=y
- default y
+ config PCF50633_ADC
+ tristate "NXP PCF50633 ADC"
+ depends on MFD_PCF50633
help
- This is used to enable I2C interface of STMPE
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
- config STMPE_SPI
- bool "STMPE SPI Inteface"
- depends on SPI_MASTER
+ config PCF50633_GPIO
+ tristate "NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
help
- This is used to enable SPI interface of STMPE
- endmenu
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
- config MFD_TC3589X
- bool "Support Toshiba TC35892 and variants"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
+ config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ depends on AC97_BUS
+ depends on GPIOLIB
help
- Support for the Toshiba TC35892 and variants I/O Expander.
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
- config MFD_TMIO
- bool
- default n
+ config MFD_PM8XXX
+ tristate
- config MFD_T7L66XB
- bool "Support Toshiba T7L66XB"
- depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+ config MFD_PM8921_CORE
+ tristate "Qualcomm PM8921 PMIC chip"
- depends on MSM_SSBI
++ depends on SSBI && BROKEN
select MFD_CORE
- select MFD_TMIO
+ select MFD_PM8XXX
help
- Support for Toshiba Mobile IO Controller T7L66XB
+ If you say yes to this option, support will be included for the
+ built-in PM8921 PMIC chip.
- config MFD_SMSC
- bool "Support for the SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ This is required if your board has a PM8921 and uses its features,
+ such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+ Say M here if you want to include support for PM8921 chip as a module.
+ This will build a module called "pm8921-core".
+
+ config MFD_PM8XXX_IRQ
+ bool "Qualcomm PM8xxx IRQ features"
+ depends on MFD_PM8XXX
+ default y if MFD_PM8XXX
+ help
+ This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+ This is required to use certain other PM 8xxx features, such as GPIO
+ and MPP.
+
+ config MFD_RDC321X
+ tristate "RDC R-321x southbridge"
+ select MFD_CORE
+ depends on PCI && GENERIC_HARDIRQS
+ help
+ Say yes here if you want to have support for the RDC R-321x SoC
+ southbridge which provides access to GPIOs and Watchdog using the
+ southbridge PCI device configuration space.
+
+ config MFD_RTSX_PCI
+ tristate "Realtek PCI-E card reader"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ This supports for Realtek PCI-Express card reader including rts5209,
+ rts5229, rtl8411, etc. Realtek card reader supports access to many
+ types of memory cards, such as Memory Stick, Memory Stick Pro,
+ Secure Digital and MultiMediaCard.
+
+ config MFD_RC5T583
+ bool "Ricoh RC5T583 Power Management system device"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Select this option to get support for the RICOH583 Power
+ Management system device.
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
+ like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+ Additional drivers must be enabled in order to use the
+ different functionality of the device.
+
+ config MFD_SEC_CORE
+ bool "SAMSUNG Electronics PMIC Series Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Support for the Samsung Electronics MFD series.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device
+
+ config MFD_SI476X_CORE
+ tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ This is the core driver for the SI476x series of AM/FM
+ radio. This MFD driver connects the radio-si476x V4L2 module
+ and the si476x audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si476x-core.
+
+ config MFD_SM501
+ tristate "Silicon Motion SM501"
+ ---help---
+ This is the core driver for the Silicon Motion SM501 multimedia
+ companion chip. This device is a multifunction device which may
+ provide numerous interfaces including USB host controller, USB gadget,
+ asynchronous serial ports, audio functions, and a dual display video
+ interface. The device may be connected by PCI or local bus with
+ varying functions enabled.
+
+ config MFD_SM501_GPIO
+ bool "Export GPIO via GPIO layer"
+ depends on MFD_SM501 && GPIOLIB
+ ---help---
+ This option uses the gpio library layer to export the 64 GPIO
+ lines on the SM501. The platform data is used to supply the
+ base number for the first GPIO line to register.
+
+ config MFD_SMSC
+ bool "SMSC ECE1099 series chips"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help