ARM: OMAP1: Palm Tungsten E board clean-up

Mostly gpio clean-up.

Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f392f5a..ca1a4bf 100644 (file)
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -10,6 +10,8 @@
  * Maintainers : http://palmtelinux.sf.net
  *                palmtelinux-developpers@lists.sf.net
  *
+ * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -24,8 +26,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
+#include <linux/apm-emulation.h>
 
-#include <asm/apm.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -51,11 +53,11 @@ static void __init omap_palmte_init_irq(void)
        omap_gpio_init();
 }
 
-static int palmte_keymap[] = {
-       KEY(0, 0, KEY_F1),
-       KEY(0, 1, KEY_F2),
-       KEY(0, 2, KEY_F3),
-       KEY(0, 3, KEY_F4),
+static const int palmte_keymap[] = {
+       KEY(0, 0, KEY_F1),              /* Calendar */
+       KEY(0, 1, KEY_F2),              /* Contacts */
+       KEY(0, 2, KEY_F3),              /* Tasks List */
+       KEY(0, 3, KEY_F4),              /* Note Pad */
        KEY(0, 4, KEY_POWER),
        KEY(1, 0, KEY_LEFT),
        KEY(1, 1, KEY_DOWN),
@@ -68,7 +70,7 @@ static int palmte_keymap[] = {
 static struct omap_kp_platform_data palmte_kp_data = {
        .rows   = 8,
        .cols   = 8,
-       .keymap = palmte_keymap,
+       .keymap = (int *) palmte_keymap,
        .rep    = 1,
        .delay  = 12,
 };
@@ -180,7 +182,7 @@ static struct platform_device palmte_irda_device = {
        .resource       = palmte_irda_resources,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *palmte_devices[] __initdata = {
        &palmte_rom_device,
        &palmte_kp_device,
        &palmte_lcd_device,
@@ -273,7 +275,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
                info->time = 0;
        } else {
                while (hi > lo + 1) {
-                       mid = (hi + lo) >> 2;
+                       mid = (hi + lo) >> 1;
                        if (batt <= palmte_battery_sample[mid])
                                lo = mid;
                        else
@@ -321,7 +323,7 @@ static struct tsc2102_config palmte_tsc2102_config = {
        .alsa_config    = &palmte_alsa_config,
 };
 
-static struct omap_board_config_kernel palmte_config[] = {
+static struct omap_board_config_kernel palmte_config[] __initdata = {
        { OMAP_TAG_USB,         &palmte_usb_config },
        { OMAP_TAG_MMC,         &palmte_mmc_config },
        { OMAP_TAG_LCD,         &palmte_lcd_config },
@@ -339,74 +341,34 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
        },
 };
 
-/* Periodically check for changes on important input pins */
-struct timer_list palmte_pin_timer;
-int prev_power, prev_headphones;
-
-static void palmte_pin_handler(unsigned long data) {
-       int power, headphones;
-
-       power = !omap_get_gpio_datain(PALMTE_DC_GPIO);
-       headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
-
-       if (power && !prev_power)
-               printk(KERN_INFO "PM: cable connected\n");
-       else if (!power && prev_power)
-               printk(KERN_INFO "PM: cable disconnected\n");
-
-       if (headphones && !prev_headphones) {
+static void palmte_headphones_detect(void *data, int state)
+{
+       if (state) {
                /* Headphones connected, disable speaker */
                omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
                printk(KERN_INFO "PM: speaker off\n");
-       } else if (!headphones && prev_headphones) {
+       } else {
                /* Headphones unplugged, re-enable speaker */
                omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
                printk(KERN_INFO "PM: speaker on\n");
        }
-
-       prev_power = power;
-       prev_headphones = headphones;
-       mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));
 }
 
-static void __init palmte_gpio_setup(void)
+static void __init palmte_misc_gpio_setup(void)
 {
-       /* Set TSC2102 PINTDAV pin as input */
+       /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
        if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
                printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
                return;
        }
        omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
 
-       /* Monitor cable-connected signals */
-       if (omap_request_gpio(PALMTE_DC_GPIO) ||
-                       omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||
-                       omap_request_gpio(PALMTE_USBDETECT_GPIO)) {
+       /* Set USB-or-DC-IN pin as input (unused) */
+       if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
                printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
                return;
        }
-       omap_set_gpio_direction(PALMTE_DC_GPIO, 1);
        omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
-       omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);
-
-       /* Set speaker-enable pin as output */
-       if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {
-               printk(KERN_ERR "Could not reserve speaker GPIO!\n");
-               return;
-       }
-       omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);
-
-       /* Monitor the headphones-connected signal */
-       if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {
-               printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");
-               return;
-       }
-       omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);
-
-       prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);
-       prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
-       setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);
-       palmte_pin_handler(0);
 }
 
 static void __init omap_palmte_init(void)
@@ -414,13 +376,12 @@ static void __init omap_palmte_init(void)
        omap_board_config = palmte_config;
        omap_board_config_size = ARRAY_SIZE(palmte_config);
 
-       platform_add_devices(devices, ARRAY_SIZE(devices));
+       platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
        spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-
+       palmte_misc_gpio_setup();
        omap_serial_init();
        omap_register_i2c_bus(1, 100, NULL, 0);
-       palmte_gpio_setup();
 }
 
 static void __init omap_palmte_map_io(void)