--- /dev/null
+Copyright 1987, 1988, 1989, 1990, 1994 by Digital Equipment Corporation,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
--- /dev/null
+2005-12-14 Kevin E. Martin <kem-at-freedesktop-dot-org>
+
+ * configure.ac:
+ Update package version number for final X11R7 release candidate.
+
+2005-12-03 Kevin E. Martin <kem-at-freedesktop-dot-org>
+
+ * configure.ac:
+ Update package version number for X11R7 RC3 release.
+
--- /dev/null
+trapdir = $(includedir)/X11/extensions
+trap_HEADERS = \
+ xtrapbits.h \
+ xtrapddmi.h \
+ xtrapdi.h \
+ xtrapemacros.h \
+ xtraplib.h \
+ xtraplibp.h \
+ xtrapproto.h
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = trapproto.pc
+
+EXTRA_DIST = autogen.sh trapproto.pc.in
--- /dev/null
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+am__leading_dot = @am__leading_dot@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+trapdir = $(includedir)/X11/extensions
+trap_HEADERS = \
+ xtrapbits.h \
+ xtrapddmi.h \
+ xtrapdi.h \
+ xtrapemacros.h \
+ xtraplib.h \
+ xtraplibp.h \
+ xtrapproto.h
+
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = trapproto.pc
+
+EXTRA_DIST = autogen.sh trapproto.pc.in
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES = trapproto.pc
+DIST_SOURCES =
+DATA = $(pkgconfig_DATA)
+
+HEADERS = $(trap_HEADERS)
+
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/configure $(trap_HEADERS) \
+ COPYING ChangeLog Makefile.am aclocal.m4 configure configure.ac \
+ install-sh missing mkinstalldirs trapproto.pc.in
+all: all-am
+
+.SUFFIXES:
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): configure.ac
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+trapproto.pc: $(top_builddir)/config.status trapproto.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
+ @list='$(pkgconfig_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \
+ $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; for p in $$list; do \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \
+ rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \
+ done
+trapHEADERS_INSTALL = $(INSTALL_HEADER)
+install-trapHEADERS: $(trap_HEADERS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(trapdir)
+ @list='$(trap_HEADERS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " $(trapHEADERS_INSTALL) $$d$$p $(DESTDIR)$(trapdir)/$$f"; \
+ $(trapHEADERS_INSTALL) $$d$$p $(DESTDIR)$(trapdir)/$$f; \
+ done
+
+uninstall-trapHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(trap_HEADERS)'; for p in $$list; do \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " rm -f $(DESTDIR)$(trapdir)/$$f"; \
+ rm -f $(DESTDIR)$(trapdir)/$$f; \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkinstalldirs) $(distdir)/.
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ $(am__remove_distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+ && rm -f $(distdir).tar.gz \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA) $(HEADERS)
+
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(trapdir)
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-pkgconfigDATA install-trapHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-pkgconfigDATA \
+ uninstall-trapHEADERS
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic ctags \
+ dist dist-all dist-bzip2 dist-gzip distcheck distclean \
+ distclean-generic distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am info info-am install install-am \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-pkgconfigDATA \
+ install-strip install-trapHEADERS installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-pkgconfigDATA uninstall-trapHEADERS
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# generated automatically by aclocal 1.7.9 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 10
+
+AC_PREREQ([2.54])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.7.9])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# -*- Autoconf -*-
+
+
+# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+# Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# -*- Autoconf -*-
+# Copyright (C) 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# serial 5 -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ : > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored.
+ if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 5
+
+AC_PREREQ(2.52)
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+dnl Copyright 2005 Red Hat, Inc
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation.
+dnl
+dnl The above copyright notice and this permission notice shall be included
+dnl in all copies or substantial portions of the Software.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+dnl OTHER DEALINGS IN THE SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of the copyright holders shall
+dnl not be used in advertising or otherwise to promote the sale, use or
+dnl other dealings in this Software without prior written authorization
+dnl from the copyright holders.
+dnl
+
+# XORG_RELEASE_VERSION
+# --------------------
+# Adds --with/without-release-string and changes the PACKAGE and
+# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION". If
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.
+
+AC_DEFUN([XORG_RELEASE_VERSION],[
+ AC_ARG_WITH(release-version,
+ AC_HELP_STRING([--with-release-version=STRING],
+ [Use release version string in package name]),
+ [RELEASE_VERSION="$withval"],
+ [RELEASE_VERSION=""])
+ if test "x$RELEASE_VERSION" != "x"; then
+ PACKAGE="$PACKAGE-$RELEASE_VERSION"
+ PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+ AC_MSG_NOTICE([Building with package name set to $PACKAGE])
+ fi
+])
+
--- /dev/null
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure --enable-maintainer-mode "$@"
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61 for TrapProto 3.4.3.
+#
+# Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ case $as_dir in
+ /*)
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf@gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME='TrapProto'
+PACKAGE_TARNAME='trapproto'
+PACKAGE_VERSION='3.4.3'
+PACKAGE_STRING='TrapProto 3.4.3'
+PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
+
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+AMTAR
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+AWK
+SET_MAKE
+am__leading_dot
+LIBOBJS
+LTLIBOBJS'
+ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures TrapProto 3.4.3 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/trapproto]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of TrapProto 3.4.3:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-release-version=STRING
+ Use release version string in package name
+
+Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" || continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+TrapProto configure 3.4.3
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by TrapProto $as_me 3.4.3, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args '$ac_arg'"
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version="1.7"
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
+
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ SET_MAKE=
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+ # test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='trapproto'
+ VERSION='3.4.3'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+
+
+
+
+
+
+# Check whether --with-release-version was given.
+if test "${with_release_version+set}" = set; then
+ withval=$with_release_version; RELEASE_VERSION="$withval"
+else
+ RELEASE_VERSION=""
+fi
+
+ if test "x$RELEASE_VERSION" != "x"; then
+ PACKAGE="$PACKAGE-$RELEASE_VERSION"
+ PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+ { echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+ fi
+
+
+ac_config_files="$ac_config_files Makefile trapproto.pc"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+t clear
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by TrapProto $as_me 3.4.3, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+TrapProto config.status 3.4.3
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "trapproto.pc") CONFIG_FILES="$CONFIG_FILES trapproto.pc" ;;
+
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+AMTAR!$AMTAR$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 57; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+
+
+
+ esac
+
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
--- /dev/null
+AC_PREREQ([2.57])
+AC_INIT([TrapProto], [3.4.3], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+
+XORG_RELEASE_VERSION
+
+AC_OUTPUT([Makefile
+ trapproto.pc])
--- /dev/null
+x11proto-trap (3.4.3-10slp2) unstable; urgency=low
+
+ * To sync git and dpkg
+ * Git: 165.213.180.234:slp/pkgs/xorg/proto/x11proto-trap
+ * Tag: x11proto-trap_3.4.3-10slp2
+
+ -- YoungHoon Jung <yhoon.jung@samsung.com> Thu, 02 Dec 2010 15:51:50 +0900
+
+x11proto-trap (3.4.3-9slp2) unstable; urgency=low
+
+ * Update maintainer
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: x11proto-trap_3.4.3-9slp2
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 21 Apr 2010 11:30:53 +0900
+
+x11proto-trap (3.4.3-8slp2) unstable; urgency=low
+
+ * Changed package name as a pure open souroce code.
+
+ -- YoungHoon Jung <yhoon.jung@samsung.com> Thu, 25 Mar 2010 17:04:27 +0900
+
+x11proto-trap (3.4.3-7) unstable; urgency=low
+
+ * Import debian package from debian main repository
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 08 Dec 2009 14:42:45 +0900
+
+x11proto-trap (3.4.3-6) unstable; urgency=low
+
+ [ Brice Goglin ]
+ * Update the long description.
+ * Add URL in debian/copyright.
+ * Add Vcs-* to debian/control.
+ * Remove Fabio from Uploaders, with his permission.
+
+ [ Julien Cristau ]
+ * Remove Branden from Uploaders with his permission.
+ * Add myself to Uploaders.
+ * Bump Standards-Version to 3.7.3.
+
+ -- Julien Cristau <jcristau@debian.org> Sun, 11 May 2008 20:13:50 +0200
+
+x11proto-trap (3.4.3-5) unstable; urgency=low
+
+ * trapproto.pc requires xt, so add Depends: libxt-dev.
+
+ -- Drew Parsons <dparsons@debian.org> Mon, 2 Oct 2006 03:11:01 +1000
+
+x11proto-trap (3.4.3-4) unstable; urgency=low
+
+ * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+ idempotency fix.
+ * Run dh_install w/ --list-missing.
+ * Change debhelper build-dep-indep to a normal build-dep, as dh_clean
+ is called inside the clean rule.
+ * Drop duplicate x11-common dep in -dev package.
+ * Bump standards version to 3.7.2.0.
+ * Version x11-common pre-dep in -dev package to 1:7.0.0 to match
+ the rest of Debian.
+
+ -- Andres Salomon <dilinger@debian.org> Fri, 21 Jul 2006 03:00:01 -0400
+
+x11proto-trap (3.4.3-3) unstable; urgency=low
+
+ * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 23 Mar 2006 21:36:23 -0500
+
+x11proto-trap (3.4.3-2) experimental; urgency=low
+
+ * Add epoch to versioned Pre-Depends on x11-common to make upgrades
+ from monolithic x11-common work (Closes: #351779).
+
+ -- Michel Dänzer <daenzer@debian.org> Thu, 9 Feb 2006 16:41:06 +0100
+
+x11proto-trap (3.4.3-1) experimental; urgency=low
+
+ * First upload to Debian
+
+ -- David Nusinow <dnusinow@debian.org> Fri, 30 Dec 2005 14:36:31 -0500
+
+x11proto-trap (3.4-1) breezy; urgency=low
+
+ * First x11proto-trap release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Mon, 16 May 2005 22:10:17 +1000
--- /dev/null
+Source: x11proto-trap
+Section: x11
+Priority: optional
+Maintainer: YoungHoon Jung <yhoon.jung@samsung.com>, SangJin Lee <lsj119@samsung.com>, Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: David Nusinow <dnusinow@debian.org>, Andres Salomon <dilinger@debian.org>, Julien Cristau <jcristau@debian.org>, YoungHoon Jung <yhoon.jung@samsung.com>
+Build-Depends: debhelper (>= 4.0.0)
+Standards-Version: 3.7.3
+Vcs-Git: git://git.debian.org/git/pkg-xorg/proto/x11proto-trap
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/proto/x11proto-trap.git
+
+Package: x11proto-trap-dev
+Architecture: all
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxt-dev
+Conflicts: libxtrap-dev (<< 6.8.2-25)
+Replaces: libxtrap-dev (<< 6.8.2-25)
+Pre-Depends: x11-common (>= 1:7.0.0)
+Description: X11 Trap extension wire protocol
+ This package provides development headers describing the wire protocol
+ for the DEC-XTRAP extension, used to synthesise input events.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This package is built from the X.org trapproto proto module.
--- /dev/null
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/proto/
+
+Copyright 1987, 1988, 1989, 1990, 1994 by Digital Equipment Corporation,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
--- /dev/null
+#!/usr/bin/make -f
+# debian/rules for the Debian x11proto-trap-dev package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+PACKAGE = x11proto-trap-dev
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+ INSTALL_PROGRAM += -s
+endif
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+
+build: build-stamp
+build-stamp:
+ dh_testdir
+
+ test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE)
+ cd obj-$(DEB_BUILD_GNU_TYPE) && \
+ ../configure --prefix=/usr --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info --disable-shared \
+ $(confflags) CFLAGS="$(CFLAGS)"
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ rm -f config.cache config.log config.status
+ rm -f */config.cache */config.log */config.status
+ rm -f conftest* */conftest*
+ rm -rf autom4te.cache */autom4te.cache
+ rm -rf obj-*
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-independent files here.
+binary-indep: build install
+ dh_testdir
+ dh_testroot
+
+ dh_installdocs
+ dh_installman
+ dh_install --sourcedir=debian/tmp --list-missing
+ dh_installchangelogs
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-dependent files here.
+binary-arch: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- /dev/null
+version=3
+http://xorg.freedesktop.org/releases/individual/proto/ trapproto-(.*)\.tar\.gz
--- /dev/null
+usr/include/X11/extensions/*
+usr/lib/pkgconfig/trapproto.pc
--- /dev/null
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc
+QUILT = quilt --quiltrc /dev/null
+# force QUILT_PATCHES to the default in case it is exported in the environment
+QUILT_PATCHES = patches/
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the
+# version number. Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+ ARCH:=$(ARCH)
+ else
+ ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(SOURCE_DIR) houses one or more source trees.
+SOURCE_DIR:=build-tree
+
+# $(SOURCE_TREE) is the location of the source tree to be compiled. If there
+# is more than one, others are found using this name plus a suffix to indicate
+# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The
+# "setup" target is responsible for creating such trees.
+#SOURCE_TREE:=$(SOURCE_DIR)/xc
+#FIXME We need to define this in our debian/rules file
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+# 1) A target name that is invoked by a package-building tool or the user.
+# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+# 2) A line delcaring 1) as a phony target (".PHONY:").
+# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+# depend on other targets.
+# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+# "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir". Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again. Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+ mkdir $(STAMP_DIR)
+ >$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches $(STAMP_DIR)/log
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
+ if [ ! -e $(STAMP_DIR)/patches ]; then \
+ mkdir $(STAMP_DIR)/patches; \
+ ln -s $(STAMP_DIR)/patches .pc; \
+ echo 2 >$(STAMP_DIR)/patches/.version; \
+ fi; \
+ if [ ! -e $(STAMP_DIR)/log ]; then \
+ mkdir $(STAMP_DIR)/log; \
+ fi; \
+ if [ -e debian/patches ] && [ ! -e patches ]; then \
+ ln -s debian/patches patches; \
+ fi; \
+ >$@
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+ if ! [ `which quilt` ]; then \
+ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+ exit 1; \
+ fi; \
+ if $(QUILT) next >/dev/null 2>&1; then \
+ echo -n "Applying patches..."; \
+ if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "No patches to apply"; \
+ fi; \
+ >$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch:
+ rm -f $(STAMP_DIR)/patch
+ @echo -n "Unapplying patches..."; \
+ if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \
+ if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "nothing to do."; \
+ fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+ rm -f $(STAMP_DIR)/genscripts
+ rm -f debian/*.config \
+ debian/*.postinst \
+ debian/*.postrm \
+ debian/*.preinst \
+ debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+ dh_testdir
+ rm -f .pc patches
+ rm -rf $(STAMP_DIR) $(SOURCE_DIR)
+ rm -rf imports
+ dh_clean debian/shlibs.local \
+ debian/po/pothead
+
+# Generate the debconf templates POT file header.
+debian/po/pothead: debian/po/pothead.in
+ sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
+ -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
+
+# Update POT and PO files.
+.PHONY: updatepo
+updatepo: debian/po/pothead
+ debian/scripts/debconf-updatepo --pot-header=pothead --verbose
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems. It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+ # Ensure we're in the correct directory.
+ dh_testdir
+ grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+ @echo -n "Auditing patches..."; \
+ >$(STAMP_DIR)/log/patch; \
+ FUZZY=; \
+ while [ -n "$$($(QUILT) next)" ]; do \
+ RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+ case "$$RESULT" in \
+ succeeded) \
+ echo "fuzzy patch: $$($(QUILT) top)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+ FUZZY=yes; \
+ ;; \
+ FAILED) \
+ echo "broken patch: $$($(QUILT) next)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+ exit 1; \
+ ;; \
+ esac; \
+ done; \
+ if [ -n "$$FUZZY" ]; then \
+ echo "there were fuzzy patches; please fix."; \
+ exit 1; \
+ else \
+ echo "done."; \
+ fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+ for FILE in debian/*.config.in \
+ debian/*.postinst.in \
+ debian/*.postrm.in \
+ debian/*.preinst.in \
+ debian/*.prerm.in; do \
+ if [ -e "$$FILE" ]; then \
+ MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+ cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+ sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+ -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+ -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
+ <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+ rm $$MAINTSCRIPT.tmp; \
+ fi; \
+ done
+ # Validate syntax of generated shell scripts.
+ #sh debian/scripts/validate-posix-sh debian/*.config \
+ # debian/*.postinst \
+ # debian/*.postrm \
+ # debian/*.preinst \
+ # debian/*.prerm
+ >$@
+
+# Generate the shlibs.local file.
+debian/shlibs.local:
+ cat debian/*.shlibs >$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi: install
+ifeq ($(SERVERMINVERS),)
+ @echo error: xserver-xorg-dev needs to be installed
+ @exit 1
+else
+ echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+ echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+ echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- /dev/null
+# $Id$
+
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts. It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions. By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+ DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+ DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+ARCHITECTURE="$(dpkg --print-installation-architecture)"
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+ RECONFIGURE="true"
+else
+ RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+ FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+ UPGRADE="yes"
+fi
+
+trap "message;\
+ message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+ message;\
+ exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+ # syntax: reject_nondigits [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters other than decimal digits and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain anything but digits?
+ if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ # can't use die(), because it wraps message() which wraps this function
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+reject_whitespace () {
+ # syntax: reject_whitespace [ operand ]
+ #
+ # scan operand (typically a shell variable whose value cannot be trusted) for
+ # whitespace characters and barf if any are found
+ if [ -n "$1" ]; then
+ # does the operand contain any whitespace?
+ if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ fi
+}
+
+reject_unlikely_path_chars () {
+ # syntax: reject_unlikely_path_chars [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters unlikely to be seen in a path and which the shell might
+ # interpret and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain any funny characters?
+ if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+ "encountered possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the
+# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+message () {
+ # pretty-print messages of arbitrary length
+ reject_nondigits "$COLUMNS"
+ echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+ # syntax: observe message ...
+ #
+ # issue observational message suitable for logging someday when support for
+ # it exists in dpkg
+ if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+ message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+ fi
+}
+
+warn () {
+ # syntax: warn message ...
+ #
+ # issue warning message suitable for logging someday when support for
+ # it exists in dpkg; also send to standard error
+ message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+ # syntax: die message ...
+ #
+ # exit script with error message
+ message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+ exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+ # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+ message "internal error: $*"
+ if [ -n "$OFFICIAL_BUILD" ]; then
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ fi
+ exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+ message "usage error: $*"
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ exit $SHELL_LIB_USAGE_ERROR
+}
+
+
+maplink () {
+ # returns what symlink should point to; i.e., what the "sane" answer is
+ # Keep this in sync with the debian/*.links files.
+ # This is only needed for symlinks to directories.
+ #
+ # XXX: Most of these look wrong in the X11R7 world and need to be fixed.
+ # If we've stopped using this function, fixing it might enable us to re-enable
+ # it again and catch more errors.
+ case "$1" in
+ /etc/X11/xkb/compiled) echo /var/lib/xkb ;;
+ /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;;
+ /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;;
+ /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;;
+ /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;;
+ /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;;
+ /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;;
+ /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;;
+ /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;;
+ /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;;
+ /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;;
+ /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;;
+ /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;;
+ /usr/bin/X11) echo ../X11R6/bin ;;
+ /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;;
+ /usr/include/X11) echo ../X11R6/include/X11 ;;
+ /usr/lib/X11) echo ../X11R6/lib/X11 ;;
+ *) internal_error "maplink() called with unknown path \"$1\"" ;;
+ esac
+}
+
+analyze_path () {
+ # given a supplied set of pathnames, break each one up by directory and do an
+ # ls -dl on each component, cumulatively; i.e.
+ # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin
+ # Thanks to Randolph Chung for this clever hack.
+
+ #local f g
+
+ while [ -n "$1" ]; do
+ reject_whitespace "$1"
+ _g=
+ message "Analyzing $1:"
+ for _f in $(echo "$1" | tr / \ ); do
+ if [ -e /$_g$_f ]; then
+ ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true
+ _g=$_g$_f/
+ else
+ message "/$_g$_f: nonexistent; directory contents of /$_g:"
+ ls -l /$_g
+ break
+ fi
+ done
+ shift
+ done
+}
+
+find_culprits () {
+ #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \
+ # msg
+
+ reject_whitespace "$1"
+ message "Searching for overlapping packages..."
+ _dpkg_info_dir=/var/lib/dpkg/info
+ if [ -d $_dpkg_info_dir ]; then
+ if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then
+ _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \
+ "(xbase-clients|x11-common|xfs|xlibs)")
+ if [ -n "$_possible_culprits" ]; then
+ _smoking_guns=$(grep -l "$1" $_possible_culprits || true)
+ if [ -n "$_smoking_guns" ]; then
+ _bad_packages=$(printf "\\n")
+ for f in $_smoking_guns; do
+ # too bad you can't nest parameter expansion voodoo
+ p=${f%*.list} # strip off the trailing ".list"
+ _package=${p##*/} # strip off the directories
+ _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package")
+ done
+ _msg=$(cat <<EOF
+The following packages appear to have file overlaps with the X.Org packages;
+these packages are either very old, or in violation of Debian Policy. Try
+upgrading each of these packages to the latest available version if possible:
+for example, with the command "apt-get install". If no newer version of a
+package is available, you will have to remove it; for example, with the command
+"apt-get remove". If even the latest available version of the package has
+this file overlap, please file a bug against that package with the Debian Bug
+Tracking System. You may want to refer the package maintainer to section 12.8
+of the Debian Policy manual.
+EOF
+)
+ message "$_msg"
+ message "The overlapping packages are: $_bad_packages"
+ else
+ message "no overlaps found."
+ fi
+ fi
+ else
+ message "cannot search; no matches for $_dpkg_info_dir/*.list."
+ fi
+ else
+ message "cannot search; $_dpkg_info_dir does not exist."
+ fi
+}
+
+# we require a readlink command or shell function
+if ! which readlink > /dev/null 2>&1; then
+ message "The readlink command was not found. Please install version" \
+ "1.13.1 or later of the debianutils package."
+ readlink () {
+ # returns what symlink in $1 actually points to
+ perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1"
+ }
+fi
+
+check_symlink () {
+ # syntax: check_symlink symlink
+ #
+ # See if specified symlink points where it is supposed to. Return 0 if it
+ # does, and 1 if it does not.
+ #
+ # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb().
+
+ #local symlink
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "check_symlink() called with wrong number of arguments;" \
+ "expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _symlink="$1"
+
+ if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+check_symlinks_and_warn () {
+ # syntax: check_symlinks_and_warn symlink ...
+ #
+ # For each argument, check for symlink sanity, and warn if it isn't sane.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install".
+
+ #local errmsg symlink
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "check_symlinks_and_warn() called with wrong number of" \
+ "arguments; expected at least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ while [ -n "$1" ]; do
+ _symlink="$1"
+ if [ -L "$_symlink" ]; then
+ if ! check_symlink "$_symlink"; then
+ observe "$_symlink symbolic link points to wrong location" \
+ "$(readlink "$_symlink"); removing"
+ rm "$_symlink"
+ fi
+ elif [ -e "$_symlink" ]; then
+ _errmsg="$_symlink exists and is not a symbolic link; this package cannot"
+ _errmsg="$_errmsg be installed until this"
+ if [ -f "$_symlink" ]; then
+ _errmsg="$_errmsg file"
+ elif [ -d "$_symlink" ]; then
+ _errmsg="$_errmsg directory"
+ else
+ _errmsg="$_errmsg thing"
+ fi
+ _errmsg="$_errmsg is removed"
+ die "$_errmsg"
+ fi
+ shift
+ done
+}
+
+check_symlinks_and_bomb () {
+ # syntax: check_symlinks_and_bomb symlink ...
+ #
+ # For each argument, check for symlink sanity, and bomb if it isn't sane.
+ #
+ # Call this function from a postinst script.
+
+ #local problem symlink
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "check_symlinks_and_bomb() called with wrong number of"
+ "arguments; expected at least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ while [ -n "$1" ]; do
+ _problem=
+ _symlink="$1"
+ if [ -L "$_symlink" ]; then
+ if ! check_symlink "$_symlink"; then
+ _problem=yes
+ warn "$_symlink symbolic link points to wrong location" \
+ "$(readlink "$_symlink")"
+ fi
+ elif [ -e "$_symlink" ]; then
+ _problem=yes
+ warn "$_symlink is not a symbolic link"
+ else
+ _problem=yes
+ warn "$_symlink symbolic link does not exist"
+ fi
+ if [ -n "$_problem" ]; then
+ analyze_path "$_symlink" "$(readlink "$_symlink")"
+ find_culprits "$_symlink"
+ die "bad symbolic links on system"
+ fi
+ shift
+ done
+}
+
+font_update () {
+ # run $UPDATECMDS in $FONTDIRS
+
+ #local dir cmd shortcmd x_font_dir_prefix
+
+ _x_font_dir_prefix="/usr/share/fonts/X11"
+
+ if [ -z "$UPDATECMDS" ]; then
+ usage_error "font_update() called but \$UPDATECMDS not set"
+ fi
+ if [ -z "$FONTDIRS" ]; then
+ usage_error "font_update() called but \$FONTDIRS not set"
+ fi
+
+ reject_unlikely_path_chars "$UPDATECMDS"
+ reject_unlikely_path_chars "$FONTDIRS"
+
+ for _dir in $FONTDIRS; do
+ if [ -d "$_x_font_dir_prefix/$_dir" ]; then
+ for _cmd in $UPDATECMDS; do
+ if which "$_cmd" > /dev/null 2>&1; then
+ _shortcmd=${_cmd##*/}
+ observe "running $_shortcmd in $_dir font directory"
+ _cmd_opts=
+ if [ "$_shortcmd" = "update-fonts-alias" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ if [ "$_shortcmd" = "update-fonts-dir" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ if [ "$_shortcmd" = "update-fonts-scale" ]; then
+ _cmd_opts=--x11r7-layout
+ fi
+ $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \
+ "failed; font directory data may not" \
+ "be up to date"
+ else
+ warn "$_cmd not found; not updating corresponding $_dir font" \
+ "directory data"
+ fi
+ done
+ else
+ warn "$_dir is not a directory; not updating font directory data"
+ fi
+ done
+}
+
+remove_conffile_prepare () {
+ # syntax: remove_conffile_prepare filename official_md5sum ...
+ #
+ # Check a conffile "filename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ #local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 2 ]; then
+ usage_error "remove_conffile_prepare() called with wrong number of" \
+ "arguments; expected at least 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+ shift
+
+ # does the _conffile even exist?
+ if [ -e "$_conffile" ]; then
+ # calculate its checksum
+ _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//')
+ # compare it to each supplied checksum
+ while [ -n "$1" ]; do
+ if [ "$_current_checksum" = "$1" ]; then
+ # we found a match; move the confffile and stop looking
+ observe "preparing obsolete conffile $_conffile for removal"
+ mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp"
+ break
+ fi
+ shift
+ done
+ fi
+}
+
+remove_conffile_commit () {
+ # syntax: remove_conffile_commit filename
+ #
+ # Complete the removal of a conffile "filename" that has become obsolete.
+ #
+ # Call this function from a postinst script after having used
+ # remove_conffile_prepare() in the preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_commit() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, remove it
+ if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $_conffile"
+ rm "$_conffile.$THIS_PACKAGE-tmp"
+ fi
+}
+
+remove_conffile_rollback () {
+ # syntax: remove_conffile_rollback filename
+ #
+ # Roll back the removal of a conffile "filename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" is after having used remove_conffile_prepare() in the
+ # preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_rollback() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, move it
+ # back
+ if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $_conffile"
+ mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile"
+ fi
+}
+
+replace_conffile_with_symlink_prepare () {
+ # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+ # official_md5sum ...
+ #
+ # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails. Otherwise copy it
+ # to newfilename and let dpkg handle it through conffiles mechanism.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ #local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 3 ]; then
+ usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+ " number of arguments; expected at least 3, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _oldconffile="$1"
+ shift
+ _newconffile="$1"
+ shift
+
+ remove_conffile_prepare "$_oldconffile" "$@"
+ # If $_oldconffile still exists, then md5sums didn't match.
+ # Copy it to new one.
+ if [ -f "$_oldconffile" ]; then
+ cp "$_oldconffile" "$_newconffile"
+ fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+ # syntax: replace_conffile_with_symlink_commit oldfilename
+ #
+ # Complete the removal of a conffile "oldfilename" that has been
+ # replaced by a symlink.
+ #
+ # Call this function from a postinst script after having used
+ # replace_conffile_with_symlink_prepare() in the preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+ "number of arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _conffile="$1"
+
+ remove_conffile_commit "$_conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+ # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+ #
+ # Roll back the replacing of a conffile "oldfilename" with symlink to
+ # "newfilename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" and verify $2 to ensure the package failed to upgrade
+ # from a version (or install over a version removed-but-not-purged) prior
+ # to the one in which the conffile was obsoleted.
+ # You should have used replace_conffile_with_symlink_prepare() in the
+ # preinst.
+
+ #local conffile
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+ "number of arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ _oldconffile="$1"
+ _newconffile="$2"
+
+ remove_conffile_rollback "$_oldconffile"
+ if [ -f "$_newconffile" ]; then
+ rm "$_newconffile"
+ fi
+}
+
+run () {
+ # syntax: run command [ argument ... ]
+ #
+ # Run specified command with optional arguments and report its exit status.
+ # Useful for commands whose exit status may be nonzero, but still acceptable,
+ # or commands whose failure is not fatal to us.
+ #
+ # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+ # those cases the return value of the debconf command *must* be checked
+ # before the string returned by debconf is used for anything.
+
+ #local retval
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "run() called with wrong number of arguments; expected at" \
+ "least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ "$@" || _retval=$?
+
+ if [ ${_retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $_retval"
+ fi
+}
+
+register_x_lib_dir_with_ld_so () {
+ # syntax: register_x_lib_dir_with_ld_so
+ #
+ # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared
+ # libraries.
+ #
+ # Call this function from the postinst script of a package that places a
+ # shared library in /usr/X11R6/lib, before invoking ldconfig.
+
+ #local dir ldsoconf
+
+ _dir="/usr/X11R6/lib"
+ _ldsoconf="/etc/ld.so.conf"
+
+ # is the line not already present?
+ if ! fgrep -qsx "$_dir" "$_ldsoconf"; then
+ observe "adding $_dir directory to $_ldsoconf"
+ echo "$_dir" >> "$_ldsoconf"
+ fi
+}
+
+deregister_x_lib_dir_with_ld_so () {
+ # syntax: deregister_x_lib_dir_with_ld_so
+ #
+ # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared
+ # libraries, if and only if no shared libaries remain there.
+ #
+ # Call this function from the postrm script of a package that places a shared
+ # library in /usr/X11R6/lib, in the event "$1" is "remove", and before
+ # invoking ldconfig.
+
+ #local dir ldsoconf fgrep_status cmp_status
+
+ _dir="/usr/X11R6/lib"
+ _ldsoconf="/etc/ld.so.conf"
+
+ # is the line present?
+ if fgrep -qsx "$_dir" "$_ldsoconf"; then
+ # are there any shared objects in the directory?
+ if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then
+ # glob expansion produced nothing, so no shared libraries are present
+ observe "removing $_dir directory from $_ldsoconf"
+ # rewrite the file (very carefully)
+ set +e
+ fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp"
+ _fgrep_status=$?
+ set -e
+ case $_fgrep_status in
+ 0|1) ;; # we don't actually care if any lines matched or not
+ *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \
+ "$_fgrep_status" ;;
+ esac
+ set +e
+ cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf"
+ _cmp_status=$?
+ set -e
+ case $_cmp_status in
+ 0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical
+ 1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ
+ *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \
+ "cmp exited with status $_cmp_status" ;;
+ esac
+ fi
+ fi
+}
+
+make_symlink_sane () {
+ # syntax: make_symlink_sane symlink target
+ #
+ # Ensure that the symbolic link symlink exists, and points to target.
+ #
+ # If symlink does not exist, create it and point it at target.
+ #
+ # If symlink exists but is not a symbolic link, back it up.
+ #
+ # If symlink exists, is a symbolic link, but points to the wrong location, fix
+ # it.
+ #
+ # If symlink exists, is a symbolic link, and already points to target, do
+ # nothing.
+ #
+ # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "make_symlink_sane() called with wrong number of arguments;" \
+ "expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ #local symlink target
+
+ _symlink="$1"
+ _target="$2"
+
+ if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then
+ observe "link from $_symlink to $_target already exists"
+ else
+ observe "creating symbolic link from $_symlink to $_target"
+ mkdir -p "${_target%/*}" "${_symlink%/*}"
+ ln -s -b -S ".dpkg-old" "$_target" "$_symlink"
+ fi
+}
+
+migrate_dir_to_symlink () {
+ # syntax: migrate_dir_to_symlink old_location new_location
+ #
+ # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+ # symbolic link to a directory or vice versa; instead, the existing state
+ # (symlink or not) will be left alone and dpkg will follow the symlink if
+ # there is one."
+ #
+ # We have to do it ourselves.
+ #
+ # This function moves the contents of old_location, a directory, into
+ # new_location, a directory, then makes old_location a symbolic link to
+ # new_location.
+ #
+ # old_location need not exist, but if it does, it must be a directory (or a
+ # symlink to a directory). If it is not, it is backed up. If new_location
+ # exists already and is not a directory, it is backed up.
+ #
+ # This function should be called from a package's preinst so that other
+ # packages unpacked after this one --- but before this package's postinst runs
+ # --- are unpacked into new_location even if their payloads contain
+ # old_location filespecs.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "migrate_dir_to_symlink() called with wrong number of"
+ "arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local _new _old
+
+ _old="$1"
+ _new="$2"
+
+ # Is old location a symlink?
+ if [ -L "$_old" ]; then
+ # Does it already point to new location?
+ if [ "$(readlink "$_old")" = "$_new" ]; then
+ # Nothing to do; migration has already been done.
+ observe "migration of $_old to $_new already done"
+ return 0
+ else
+ # Back it up.
+ warn "backing up symbolic link $_old as $_old.dpkg-old"
+ mv -b "$_old" "$_old.dpkg-old"
+ fi
+ fi
+
+ # Does old location exist, but is not a directory?
+ if [ -e "$_old" ] && ! [ -d "$_old" ]; then
+ # Back it up.
+ warn "backing up non-directory $_old as $_old.dpkg-old"
+ mv -b "$_old" "$_old.dpkg-old"
+ fi
+
+ observe "migrating $_old to $_new"
+
+ # Is new location a symlink?
+ if [ -L "$_new" ]; then
+ # Does it point the wrong way, i.e., back to where we're migrating from?
+ if [ "$(readlink "$_new")" = "$_old" ]; then
+ # Get rid of it.
+ observe "removing symbolic link $_new which points to $_old"
+ rm "$_new"
+ else
+ # Back it up.
+ warn "backing up symbolic link $_new as $_new.dpkg-old"
+ mv -b "$_new" "$_new.dpkg-old"
+ fi
+ fi
+
+ # Does new location exist, but is not a directory?
+ if [ -e "$_new" ] && ! [ -d "$_new" ]; then
+ warn "backing up non-directory $_new as $_new.dpkg-old"
+ mv -b "$_new" "$_new.dpkg-old"
+ fi
+
+ # Create new directory if it does not yet exist.
+ if ! [ -e "$_new" ]; then
+ observe "creating $_new"
+ mkdir -p "$_new"
+ fi
+
+ # Copy files in old location to new location. Back up any filenames that
+ # already exist in the new location with the extension ".dpkg-old".
+ observe "copying files from $_old to $_new"
+ if ! (cd "$_old" && cp -a -b -S ".dpkg-old" . "$_new"); then
+ die "error(s) encountered while copying files from $_old to $_new"
+ fi
+
+ # Remove files at old location.
+ observe "removing $_old"
+ rm -r "$_old"
+
+ # Create symlink from old location to new location.
+ make_symlink_sane "$_old" "$_new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- /dev/null
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "$0: no input file specified" >&2
+ exit 1
+else
+ :
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d "$dst" ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=$mkdirprog
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f "$src" ] || [ -d "$src" ]
+ then
+ :
+ else
+ echo "$0: $src does not exist" >&2
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "$0: no destination specified" >&2
+ exit 1
+ else
+ :
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d "$dst" ]
+ then
+ dst=$dst/`basename "$src"`
+ else
+ :
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+ '
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp=$pathcomp$1
+ shift
+
+ if [ ! -d "$pathcomp" ] ;
+ then
+ $mkdirprog "$pathcomp"
+ else
+ :
+ fi
+
+ pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd "$dst" &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ :
+ fi
+
+# Make a couple of temp file names in the proper directory.
+
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+# Trap to clean up temp files at exit.
+
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+} &&
+
+# Now rename the file to the real destination.
+
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+ (exit 0); exit
+}
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing 0.4 - GNU automake"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here
--- /dev/null
+
+Name: xorg-x11-proto-trapproto
+Summary: X.Org X11 Protocol trapproto
+Version: 3.4.3
+Release: 5.7
+Group: Development/System
+License: MIT
+URL: http://www.x.org
+Source0: http://xorg.freedesktop.org/releases/individual/proto/trapproto-%{version}.tar.gz
+BuildRequires: pkgconfig(xt)
+BuildRequires: pkgconfig(xorg-macros)
+Provides: trapproto
+
+
+%description
+Description: %{summary}
+
+
+
+%prep
+%setup -q -n trapproto-%{version}
+
+%build
+
+%reconfigure --disable-static
+# Call make instruction with smp support
+make %{?jobs:-j%jobs}
+
+%install
+rm -rf %{buildroot}
+%make_install
+
+
+%clean
+rm -rf %{buildroot}
+
+
+
+
+
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/pkgconfig/trapproto.pc
+%{_includedir}/X11/extensions/xtrapdi.h
+%{_includedir}/X11/extensions/xtrapproto.h
+%{_includedir}/X11/extensions/xtrapemacros.h
+%{_includedir}/X11/extensions/xtrapbits.h
+%{_includedir}/X11/extensions/xtraplib.h
+%{_includedir}/X11/extensions/xtrapddmi.h
+%{_includedir}/X11/extensions/xtraplibp.h
+
+
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: TrapProto
+Description: Trap extension headers
+Version: @PACKAGE_VERSION@
+Requires: xt
+Cflags: -I${includedir}
--- /dev/null
+/* $XFree86$ */
+/*
+ * This include file is designed to be a portable way for systems to define
+ * bit field manipulation of arrays of bits.
+ */
+#ifndef __XTRAPBITS__
+#define __XTRAPBITS__ "@(#)xtrapbits.h 1.6 - 90/09/18 "
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1994 by Digital Equipment Corporation,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ */
+typedef unsigned char *UByteP; /* Pointer to an unsigned byte array */
+#define BitsInByte 8L /* The number of bits in a byte */
+
+#define BitInByte(bit) /* Returns the bit mask of a byte */ \
+ (1L << (((bit) % BitsInByte)))
+
+#define BitInWord(bit) /* Returns the bit mask of a word */ \
+ (1L << (((bit) % (BitsInByte * 2L))))
+
+#define BitInLong(bit) /* Returns the bit mask of a long */ \
+ (1L << (((bit) % (BitsInByte * 4L))))
+
+#define ByteInArray(array,bit) /* Returns the byte offset to get to a bit */ \
+ (((UByteP)(array))[(bit) / BitsInByte])
+
+#define BitIsTrue(array,bit) /* Test to see if a specific bit is True */ \
+ (ByteInArray(array,bit) & BitInByte(bit))
+
+#define BitIsFalse(array,bit) /* Test to see if a specific bit is False */ \
+ (!(BitIsTrue(array,bit)))
+
+#define BitTrue(array,bit) /* Set a specific bit to be True */ \
+ (ByteInArray(array,bit) |= BitInByte(bit))
+
+#define BitFalse(array,bit) /* Set a specific bit to be False */ \
+ (ByteInArray(array,bit) &= ~BitInByte(bit))
+
+#define BitToggle(array,bit) /* Toggle a specific bit */ \
+ (ByteInArray(array,bit) ^= BitInByte(bit))
+
+#define BitCopy(dest,src,bit) /* Copy a specific bit */ \
+ BitIsTrue((src),(bit)) ? BitTrue((dest),(bit)) : BitFalse((dest),(bit))
+
+#define BitValue(array,bit) /* Return True or False depending on bit */ \
+ (BitIsTrue((array),(bit)) ? True : False)
+
+#define BitSet(array,bit,value) /* Set bit to given value in array */ \
+ (value) ? BitTrue((array),(bit)) : BitFalse((array),(bit))
+
+#endif /* __XTRAPBITS__ */
--- /dev/null
+/* $XFree86$ */
+
+#ifndef __XTRAPDDMI__
+#define __XTRAPDDMI__
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991 by Digital Equipment Corp., Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This header file is used by the XTrap server extension only
+ * (not used by clients or the XTrap Toolkit). Information
+ * contained herein should *not* be visible to clients (xtrapdi.h
+ * is used for this). The name is historical.
+ */
+#include <X11/X.h>
+#include <X11/extensions/xtrapbits.h>
+#include "dix.h"
+
+#ifndef MIN
+# define MIN(a,b) ((a) < (b) ? (a) : (b))
+#endif
+#ifndef MAX
+# define MAX(a,b) ((a) > (b) ? (a) : (b))
+#endif
+
+#define XETrapNumEvents 1L /* constants used for AddExtension */
+
+/* Other constants used within the extension code */
+#define XETrapMinRepSize 32L /* Minimum number of longs */
+
+/* This structure will be globally declared to provide storage to hold
+ * the various extension wide configuration information. Allocated on
+ * a per-client basis.
+ */
+typedef struct
+{
+ ClientPtr client; /* Multi-client support and error handling */
+ xXTrapGetCurReply cur; /* Struct of Miscellaneous state info */
+ xXTrapGetStatsReply *stats; /* Pointer to stat's, malloc'd if requested */
+ CARD32 last_input_time B32; /* last timestamp from input event */
+ CARD16 protocol B16; /* current communication protocol */
+} XETrapEnv;
+
+#define XETrapSetHeaderEvent(phdr) ((phdr)->type = 0x1L)
+#define XETrapSetHeaderRequest(phdr) ((phdr)->type = 0x2L)
+#define XETrapSetHeaderSpecial(phdr) ((phdr)->type = 0x3L)
+#define XETrapSetHeaderCursor(phdr) ((phdr)->type = 0x4L)
+#define XETrapSetHeaderReply(phdr) ((phdr)->type = 0x5L)
+
+#ifndef vaxc
+#define globaldef
+#define globalref extern
+#endif
+
+/* Extension platform identifier (conditionally defined) */
+#if ( defined (__osf__) && defined(__alpha) )
+# define XETrapPlatform PF_DECOSF1
+#endif
+#ifdef ultrix
+# define XETrapPlatform PF_DECUltrix
+#endif
+#ifdef vms
+#ifdef VAXELN
+# define XETrapPlatform PF_DECELN
+#else
+# define XETrapPlatform PF_DECVMS
+#endif
+#endif
+#ifdef VT1000
+# define XETrapPlatform PF_DECVT1000
+#endif
+#ifdef VXT
+# define XETrapPlatform PF_DECXTerm
+#endif
+#ifdef PC
+# define XETrapPlatform PF_IBMAT
+#endif
+#ifdef sun
+# define XETrapPlatform PF_SunSparc
+#endif
+#ifndef XETrapPlatform
+# define XETrapPlatform PF_Other
+#endif /* XETrapPlatform */
+
+#endif /* __XTRAPDDMI__ */
--- /dev/null
+/* $XFree86$ */
+#ifndef __XTRAPDI__
+#define __XTRAPDI__
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991, 1992, 1994 by Digital Equipment Corp.,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This header file defines the common structures/constants
+ * between the XTrap extension and clients. All protocol
+ * definitions between XTrap extension/clients can be found
+ * here.
+ */
+
+#define NEED_REPLIES
+#define NEED_EVENTS
+#ifndef IN_MODULE
+#include <stdio.h>
+#endif
+#include <X11/X.h>
+#include <X11/Xmd.h>
+#ifdef SMT
+#define NEED_EVENTS
+#define NEED_REPLIES
+#endif
+#include <X11/Xproto.h>
+#include <X11/extensions/xtrapbits.h>
+#define XTrapExtName "DEC-XTRAP"
+/* Current Release, Version, and Revision of the XTrap Extension */
+#define XETrapRelease 3L
+#define XETrapVersion 4L
+#ifndef XETrapRevision /* Changed from the Makefile by users */
+# define XETrapRevision 0L
+#endif /* XETrapRevision */
+#define XETrapProtocol 32L
+
+#ifndef SIZEOF
+# ifdef __STDC__
+# define SIZEOF(x) sz_##x
+# else
+# define SIZEOF(x) sz_/**/x
+# endif /* if ANSI C compiler else not */
+#endif
+#ifndef sz_CARD32
+#define sz_CARD32 4L
+#endif
+#ifndef sz_CARD8
+#define sz_CARD8 1L
+#endif
+#ifndef True
+# define True 1L
+# define False 0L
+#endif
+
+typedef int (*int_function)();
+typedef void (*void_function)();
+
+/* This is used as flags to indicate desired request traps
+ * Note: This has been padded to a CARD32 to keep structure aligned
+ */
+#define XETrapMaxRequest (((SIZEOF(CARD32)+((256L-1L) / \
+ (BitsInByte*SIZEOF(CARD8))))/SIZEOF(CARD32))*SIZEOF(CARD32))
+typedef CARD8 ReqFlags[XETrapMaxRequest];
+
+/* This is used as flags to indicate desired event traps
+ * Until events become *fully vectored*, we'll have to fake it
+ * by defining an array of 5 events (KeyPress, KeyRelease,
+ * ButtonPress, ButtonRelease, and MotionNotify. The extra 2
+ * are required as the event types start with "2" (errors and
+ * replies are 0 & 1). The event type is the index into the
+ * bits.
+ * Note: This has been padded to a longword to keep structure aligned
+ */
+#ifndef VECTORED_EVENTS
+#define XETrapCoreEvents (2L+5L)
+#else
+#define XETrapCoreEvents 128L
+#endif
+#define XETrapMaxEvent (((SIZEOF(CARD32)+((XETrapCoreEvents-1L) / \
+ (BitsInByte*SIZEOF(CARD8))))/SIZEOF(CARD32))*SIZEOF(CARD32))
+typedef CARD8 EventFlags[XETrapMaxEvent];
+
+/* This structure is used in a request to specify the types of
+ * configuration information that should be changed or updated.
+ */
+typedef struct
+{
+ CARD8 valid[4L]; /* Bits TRUE indicates data field is used */
+ CARD8 data[4L]; /* Bits looked at if corresponding valid bit set */
+ ReqFlags req; /* Bits coorespond to core requests */
+ EventFlags event; /* Bits correspond to core events */
+} XETrapFlags;
+
+/* Bit definitions for the above XETrapFlags structure. */
+#define XETrapTimestamp 0L /* hdr timestamps desired */
+#define XETrapCmd 1L /* command key specified */
+#define XETrapCmdKeyMod 2L /* cmd key is a modifier */
+#define XETrapRequest 3L /* output requests array */
+#define XETrapEvent 4L /* future output events array */
+#define XETrapMaxPacket 5L /* Maximum packet length set */
+#define XETrapTransOut 6L /* obsolete */
+#define XETrapStatistics 7L /* collect counts on requests */
+#define XETrapWinXY 8L /* Fill in Window (X,Y) in hdr */
+#define XETrapTransIn 9L /* obsolete */
+#define XETrapCursor 10L /* Trap cursor state changes */
+#define XETrapXInput 11L /* Use XInput extension */
+#define XETrapVectorEvents 12L /* Use Vectored Events (128) */
+#define XETrapColorReplies 13L /* Return replies with Color Req's */
+#define XETrapGrabServer 14L /* Disables client GrabServers */
+
+typedef struct /* used by XEConfigRequest */
+{
+ XETrapFlags flags; /* Flags to specify what should be chg'd */
+ CARD16 max_pkt_size B16; /* Maximum number of bytes in a packet */
+ CARD8 cmd_key; /* Keyboard command_key (KeyCode) */
+/*
+ * cmd_key is intentionally *not* defined KeyCode since it's definition is
+ * ambiguous (int in Intrinsic.h and unsigned char in X.h.
+ */
+ CARD8 pad[1L]; /* pad out to a quadword */
+} XETrapCfg;
+
+/* These structures are used within the Xtrap request structure for
+ * the various types of xtrap request
+ */
+#ifndef _XINPUT
+/* (see the definition of XEvent as a reference) */
+typedef struct /* used by XESimulateXEventRequest for synthesizing core evts */
+{
+ CARD8 type; /* (must be first) as in XEvent */
+ CARD8 detail; /* Detail keycode/button as in XEvent */
+ CARD8 screen; /* screen number (0 to n) */
+ CARD8 pad; /* pad to longword */
+ INT16 x B16; /* X & Y coord as in XEvent */
+ INT16 y B16;
+} XETrapInputReq;
+#endif
+
+/* These are constants that refer to the extension request vector table.
+ * A request will use these values as minor opcodes.
+ */
+#define XETrap_Reset 0L /* set to steady state */
+#define XETrap_GetAvailable 1L /* get available funct from ext */
+#define XETrap_Config 2L /* configure extension */
+#define XETrap_StartTrap 3L /* use Trapping */
+#define XETrap_StopTrap 4L /* stop using Trapping */
+#define XETrap_GetCurrent 5L /* get current info from ext */
+#define XETrap_GetStatistics 6L /* get count statistics from ext */
+#ifndef _XINPUT
+#define XETrap_SimulateXEvent 7L /* async input simulation */
+#endif
+#define XETrap_GetVersion 8L /* Get (Just) Version */
+#define XETrap_GetLastInpTime 9L /* Get Timestamp of last client input */
+
+/* The following are formats of a request to the XTRAP
+ * extension. The data-less XTrap requests all use xXTrapReq
+ */
+typedef struct
+{
+ CARD8 reqType;
+ CARD8 minor_opcode;
+ CARD16 length B16;
+ CARD32 pad B32; /* Maintain quadword alignment */
+} xXTrapReq;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapReq (sizeof(xXTrapReq))
+/* For retrieving version/available info (passes lib-side protocol number) */
+typedef struct
+{
+ CARD8 reqType;
+ CARD8 minor_opcode;
+ CARD16 length B16;
+ CARD16 protocol B16; /* The xtrap extension protocol number */
+ CARD16 pad B16; /* Maintain quadword alignment */
+} xXTrapGetReq;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapGetReq (sizeof(xXTrapGetReq))
+
+typedef struct
+{
+ CARD8 reqType;
+ CARD8 minor_opcode;
+ CARD16 length B16;
+ /*
+ * The follwing is done so that structure padding wont be
+ * a problem. The request structure contains a shadow for
+ * the XETrapCfg structure. Since the XETrapCfg also has a
+ * substructure (XETrapFlags) this structure is also shadowed.
+ *
+ * The following are a shadow of the XETrapFlags
+ * structure.
+ */
+ CARD8 config_flags_valid[4L];
+ CARD8 config_flags_data[4L];
+ ReqFlags config_flags_req;
+ EventFlags config_flags_event;
+ /* End Shadow (XETrapFlags)*/
+ CARD16 config_max_pkt_size B16; /* Max number of bytes in a packet */
+ CARD8 config_cmd_key; /* Keyboard command_key (KeyCode) */
+/*
+ * cmd_key is intentionally *not* defined KeyCode since it's definition is
+ * ambiguous (int in Intrinsic.h and unsigned char in X.h.
+ */
+ CARD8 config_pad[1L]; /* pad out to a quadword */
+ /* End Shadow (XETrapCfg) */
+ CARD32 pad B32; /* Maintain quadword alignment */
+} xXTrapConfigReq;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapConfigReq (sizeof(xXTrapConfigReq))
+
+#ifndef _XINPUT
+typedef struct
+{
+ CARD8 reqType;
+ CARD8 minor_opcode;
+ CARD16 length B16;
+ CARD32 pad B32; /* Maintain quadword alignment */
+ XETrapInputReq input;
+} xXTrapInputReq;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapInputReq (sizeof(xXTrapInputReq))
+#endif
+
+
+/* The following structures are used by the server extension to send
+ * information and replies to the client.
+ */
+
+/* header for all X replies */
+typedef struct
+{
+ CARD8 type;
+ CARD8 detail;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+} XETrapRepHdr;
+
+/* Structure of Get Available Functionality reply */
+typedef struct
+{
+ CARD32 pf_ident B32; /* Contains constant identifying the platform */
+ CARD16 xtrap_release B16; /* The xtrap extension release number */
+ CARD16 xtrap_version B16; /* The xtrap extension version number */
+ CARD16 xtrap_revision B16; /* The xtrap extension revision number */
+ CARD16 max_pkt_size B16; /* Maximum number of bytes in a packet */
+ CARD8 valid[4]; /* What specific configuration flags are valid */
+ CARD32 major_opcode B32; /* The major opcode identifying xtrap */
+ CARD32 event_base B32; /* The event value we start at */
+ CARD32 pad0 B32; /* obsolete field */
+ CARD16 pad1 B16, pad2 B16, pad3 B16; /* obsolete field */
+ CARD16 xtrap_protocol B16; /* The xtrap extension protocol number */
+ INT16 cur_x B16; /* Current X & Y coord for relative motion */
+ INT16 cur_y B16;
+} XETrapGetAvailRep;
+
+typedef struct
+{
+ CARD16 xtrap_release B16; /* The xtrap extension release number */
+ CARD16 xtrap_version B16; /* The xtrap extension version number */
+ CARD16 xtrap_revision B16; /* The xtrap extension revision number */
+ CARD16 xtrap_protocol B16; /* The xtrap extension protocol number */
+} XETrapGetVersRep;
+
+typedef struct
+{
+ CARD32 last_time B32; /* Timestamp of last input time */
+} XETrapGetLastInpTimeRep;
+
+/* Structure of Get Current Configuration Information reply */
+typedef struct
+{
+ CARD8 state_flags[2]; /* Miscelaneous flags, see below #define's */
+ CARD16 pad0 B16; /* Assure quadword alignment */
+ XETrapCfg config; /* Current Config information */
+ CARD32 pad1 B32;
+} XETrapGetCurRep;
+
+/* Mask definitions for the above flags. */
+#define XETrapTrapActive 0L /* If sending/receiving between client/ext */
+
+/* Structure of Get Statistics Information reply */
+typedef struct
+{
+ CARD32 requests[256L]; /* Array containing request counts if trapped */
+ CARD32 events[XETrapCoreEvents]; /* Array containing event stats */
+#ifndef VECTORED_EVENTS
+ CARD32 pad B32; /* Pad out to a quadword */
+#endif
+} XETrapGetStatsRep;
+
+#define PF_Other 0L /* server not one of the below */
+#define PF_Apollo 10L /* server on Apollo system */
+#define PF_ATT 20L /* server on AT&T system */
+#define PF_Cray1 30L /* server on Cray 1 system */
+#define PF_Cray2 31L /* server on Cray 2 system */
+#define PF_DECUltrix 40L /* server on DEC ULTRIX system */
+#define PF_DECVMS 41L /* server on DEC VMS system */
+#define PF_DECVT1000 42L /* server on DEC-VT1000-terminal */
+#define PF_DECXTerm 43L /* server on DEC-X-terminal */
+#define PF_DECELN 44L /* server on DEC VAXELN X terminal */
+#define PF_DECOSF1 45L /* server on DEC's OSF/1 system */
+#define PF_HP9000s800 50L /* server on HP 9000/800 system */
+#define PF_HP9000s300 51L /* server on HP 9000/300 system */
+#define PF_IBMAT 60L /* server on IBM/AT system */
+#define PF_IBMRT 61L /* server on IBM/RT system */
+#define PF_IBMPS2 62L /* server on IBM/PS2 system */
+#define PF_IBMRS 63L /* server on IBM/RS system */
+#define PF_MacII 70L /* server on Mac II system */
+#define PF_Pegasus 80L /* server on Tektronix Pegasus system */
+#define PF_SGI 90L /* server on Silicon Graphcis system */
+#define PF_Sony 100L /* server on Sony system */
+#define PF_Sun3 110L /* server on Sun 3 system */
+#define PF_Sun386i 111L /* server on Sun 386i system */
+#define PF_SunSparc 112L /* server on Sun Sparc system */
+
+/* reply sent back by XETrapGetAvailable request */
+typedef struct
+{
+ XETrapRepHdr hdr;
+ XETrapGetAvailRep data;
+} xXTrapGetAvailReply;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapGetAvailReply sizeof(xXTrapGetAvailReply)
+
+/* reply sent back by XETrapGetVersion request */
+typedef struct
+{
+ XETrapRepHdr hdr;
+ XETrapGetVersRep data;
+ CARD32 pad0 B32; /* pad out to 32 bytes */
+ CARD32 pad1 B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+} xXTrapGetVersReply;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapGetVersReply sizeof(xXTrapGetVersReply)
+
+/* reply sent back by XETrapGetLastInpTime request */
+typedef struct
+{
+ XETrapRepHdr hdr;
+ /*
+ * The following is a shadow of the XETrapGetLastInpTimeRep
+ * structure. This is done to avoid structure padding.
+ */
+ CARD32 data_last_time B32; /* Timestamp of last input time */
+ CARD32 pad0 B32; /* pad out to 32 bytes */
+ CARD32 pad1 B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+} xXTrapGetLITimReply;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapGetLITimReply sizeof(xXTrapGetLITimReply)
+
+/* reply sent back by XETrapGetCurrent request */
+typedef struct
+{
+ XETrapRepHdr hdr;
+ /*
+ * The following is a shadow of the XETrapGetCurRep
+ * structure. This is done to avoid structure padding.
+ * Since the XETrapGetCurRep structure contains a sub-structure
+ * (XETrapCfg) there is a shadow for that as well.*/
+ CARD8 data_state_flags[2]; /* Misc flags, see below #define's */
+ CARD16 data_pad0 B16; /* Assure quadword alignment */
+ /* XETrapCfg Shadow Starts */
+ CARD8 data_config_flags_valid[4L];
+ CARD8 data_config_flags_data[4L];
+ ReqFlags data_config_flags_req;
+ EventFlags data_config_flags_event;
+ CARD16 data_config_max_pkt_size B16; /* Max num of bytes in a pkt */
+ CARD8 data_config_cmd_key; /* Keyboard cmd_key (KeyCode) */
+/*
+ * cmd_key is intentionally *not* defined KeyCode since it's definition is
+ * ambiguous (int in Intrinsic.h and unsigned char in X.h.
+ */
+ CARD8 data_config_pad[1L]; /* pad out to a quadword */
+ /* End Shadow (XETrapCfg) */
+ CARD32 pad1 B32;
+} xXTrapGetCurReply;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_xXTrapGetCurReply sizeof(xXTrapGetCurReply)
+
+/* reply sent back by XETrapGetStatistics request */
+/* Note:
+ * The following does *not* use the standard XETrapRepHdr, but instead
+ * one which is padded out to 32-bytes. This is because Cray's have a problem
+ * reading arrays of CARD32s without using the _Read32 macro (see XERqsts.c).
+ * This requires that none of the data be in the _Reply area.
+ */
+typedef struct
+{
+ CARD8 type;
+ CARD8 detail;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+ CARD32 pad0 B32;
+ CARD32 pad1 B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+ CARD32 pad5 B32;
+ XETrapGetStatsRep data;
+} xXTrapGetStatsReply;
+#define sz_xXTrapGetStatsReply 1088
+
+typedef struct /* the XTrap Output header (for output from ext to client) */
+{ /* this must be quadword aligned for portability */
+ CARD32 count B32; /* Length including this header */
+ CARD32 timestamp B32; /* timestamp if desired */
+ CARD8 type; /* event id, request id, special id */
+ CARD8 screen; /* screen number (0 to n) */
+ INT16 win_x B16; /* X coord of drawable, if any */
+ INT16 win_y B16; /* X coord of drawable, if any */
+ CARD16 client B16; /* to distinguish requests */
+} XETrapHeader;
+/* the following works because all fields are defined as bit (Bnn) fields */
+#define sz_XETrapHeader sizeof(XETrapHeader)
+
+#define XETrapHeaderIsEvent(phdr) (XETrapGetHeaderType(phdr) == 0x1L)
+#define XETrapHeaderIsRequest(phdr) (XETrapGetHeaderType(phdr) == 0x2L)
+#define XETrapHeaderIsSpecial(phdr) (XETrapGetHeaderType(phdr) == 0x3L)
+#define XETrapHeaderIsCursor(phdr) (XETrapGetHeaderType(phdr) == 0x4L)
+#define XETrapHeaderIsReply(phdr) (XETrapGetHeaderType(phdr) == 0x5L)
+
+/* Define a structure used for reading/writing datum of type XTrap */
+typedef struct
+{
+ XETrapHeader hdr;
+ union
+ {
+ xEvent event;
+ xResourceReq req;
+ xGenericReply reply;
+ /* special? */
+ } u;
+} XETrapDatum;
+
+/* this doesn't get picked up for VMS server builds (different Xproto.h) */
+#ifndef sz_xEvent
+#define sz_xEvent 32
+#endif
+/* Minimum size of a packet from the server extension */
+#define XETrapMinPktSize (SIZEOF(XETrapHeader) + SIZEOF(xEvent))
+
+/* Constants used with the XLIB transport */
+#define XETrapDataStart 0L /* Used in the detail field */
+#define XETrapDataContinued 1L /* Used in the detail field */
+#define XETrapDataLast 2L /* Used in the detail field */
+#define XETrapData 0L /* Used in the type field */
+#define XETrapNumberEvents 1L
+/* This is the representation on the wire(see also XLib.h) */
+#define sz_EventData 24L /* 32 bytes - type, detail, seq, index */
+typedef struct {
+ CARD8 type;
+ CARD8 detail;
+ CARD16 sequenceNumber B16;
+ CARD32 idx B32;
+ CARD8 data[sz_EventData];
+} xETrapDataEvent;
+
+/* Error message indexes added to X for extension */
+#define BadIO 2L /* Can't read/write */
+#define BadStatistics 4L /* Stat's not avail. */
+#define BadDevices 5L /* Devices not vectored */
+#define BadScreen 7L /* Can't send event to given screen */
+#define BadSwapReq 8L /* Can't send swapped extension requests */
+#define XETrapNumErrors (BadSwapReq + 1)
+
+
+#define XEKeyIsClear 0
+#define XEKeyIsEcho 1
+#define XEKeyIsOther 2
+
+#endif /* __XTRAPDI__ */
--- /dev/null
+/* $XFree86: xc/include/extensions/xtrapemacros.h,v 1.1 2001/11/02 23:29:26 dawes Exp $ */
+#ifndef __XTRAPEMACROS__
+#define __XTRAPEMACROS__ "@(#)xtrapemacros.h 1.9 - 90/09/18 "
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991, 1994 by Digital Equipment Corp.,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This include file is designed to provide the *visible*
+ * interface to XTrap data structures. Fields can be set
+ * using these macros by client programs unless otherwise
+ * specified; however, use of Trap Context convenience
+ * routines is strongly encouraged (XETrapContext.c)
+ */
+#include <X11/extensions/xtrapbits.h>
+#include <signal.h>
+
+/* msleep macro to replace msleep() for portability reasons */
+#define msleep(m) usleep((m)*1000)
+
+/* Copying TC's assumes that the new TC must be created */
+#define XECopyTC(src,mask,dest) \
+ (dest = XECreateTC(((src)->dpy), (mask), (&((src)->values))))
+
+/* Expands to SET each element of the TCValues structure
+ * Returns the TCValues Mask so that the Set can be entered
+ * as an argument to the XEChangeTC() routine call
+ */
+/* Note: req_cb & evt_cb would only be used if you wanted to
+ * *share* callbacks between Trap Contexts. Normally,
+ * XEAddRequestCB() and XEAddEventCB() would be used.
+ */
+#define XETrapSetCfgReqCB(tcv,x) ((tcv)->req_cb = (x))
+#define XETrapSetCfgEvtCB(tcv,x) ((tcv)->evt_cb = (x))
+#define XETrapSetCfgMaxPktSize(tcv,x) ((tcv)->v.max_pkt_size = (x))
+#define XETrapSetCfgCmdKey(tcv,x) ((tcv)->v.cmd_key = (x))
+/* Note: e is only pertinent for "valid" or "data" */
+#define XETrapSetCfgFlags(tcv,e,a) \
+ memcpy((tcv)->v.flags.e, (a), sizeof((tcv)->v.flags.e))
+#define XETrapSetCfgFlagTimestamp(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapTimestamp, (x))
+#define XETrapSetCfgFlagCmd(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapCmd, (x))
+#define XETrapSetCfgFlagCmdKeyMod(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapCmdKeyMod, (x))
+#define XETrapSetCfgFlagRequest(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapRequest, (x))
+#define XETrapSetCfgFlagEvent(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapEvent, (x))
+#define XETrapSetCfgFlagMaxPacket(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapMaxPacket, (x))
+#define XETrapSetCfgFlagStatistics(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapStatistics, (x))
+#define XETrapSetCfgFlagWinXY(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapWinXY, (x))
+#define XETrapSetCfgFlagCursor(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapCursor, (x))
+#define XETrapSetCfgFlagReq(tcv,request,x) \
+ BitSet((tcv)->v.flags.req, (request), (x))
+#define XETrapSetCfgFlagXInput(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapXInput, (x))
+#define XETrapSetCfgFlagColorReplies(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapColorReplies, (x))
+#define XETrapSetCfgFlagGrabServer(tcv,e,x) \
+ BitSet((tcv)->v.flags.e, XETrapGrabServer, (x))
+#define XETrapSetCfgFlagEvt(tcv,evt,x) \
+ BitSet((tcv)->v.flags.event, (evt), (x))
+
+#define XETrapSetValFlagDeltaTimes(tcv,x) \
+ BitSet((tcv)->tc_flags, XETCDeltaTimes, (x))
+
+/* Fields returned in the "GetAvailable" request */
+#define XETrapGetAvailPFIdent(avail) ((avail)->pf_ident)
+#define XETrapGetAvailRelease(avail) ((avail)->xtrap_release)
+#define XETrapGetAvailVersion(avail) ((avail)->xtrap_version)
+#define XETrapGetAvailRevision(avail) ((avail)->xtrap_revision)
+#define XETrapGetAvailMaxPktSize(avail) ((avail)->max_pkt_size)
+#define XETrapGetAvailFlags(avail,a) \
+ memcpy((a), (avail)->valid, sizeof((avail)->valid))
+#define XETrapGetAvailFlagTimestamp(avail) \
+ (BitValue((avail)->valid, XETrapTimestamp))
+#define XETrapGetAvailFlagCmd(avail) \
+ (BitValue((avail)->valid, XETrapCmd))
+#define XETrapGetAvailFlagCmdKeyMod(avail) \
+ (BitValue((avail)->valid, XETrapCmdKeyMod))
+#define XETrapGetAvailFlagRequest(avail) \
+ (BitValue((avail)->valid, XETrapRequest))
+#define XETrapGetAvailFlagEvent(avail) \
+ (BitValue((avail)->valid, XETrapEvent))
+#define XETrapGetAvailFlagMaxPacket(avail) \
+ (BitValue((avail)->valid, XETrapMaxPacket))
+#define XETrapGetAvailFlagStatistics(avail) \
+ (BitValue((avail)->valid, XETrapStatistics))
+#define XETrapGetAvailFlagWinXY(avail) \
+ (BitValue((avail)->valid, XETrapWinXY))
+#define XETrapGetAvailFlagCursor(avail) \
+ (BitValue((avail)->valid, XETrapCursor))
+#define XETrapGetAvailFlagXInput(avail) \
+ (BitValue((avail)->valid, XETrapXInput))
+#define XETrapGetAvailFlagVecEvt(avail) \
+ (BitValue((avail)->valid, XETrapVectorEvents))
+#define XETrapGetAvailFlagColorReplies(avail) \
+ (BitValue((avail)->valid, XETrapColorReplies))
+#define XETrapGetAvailFlagGrabServer(avail) \
+ (BitValue((avail)->valid, XETrapGrabServer))
+#define XETrapGetAvailOpCode(avail) ((avail)->major_opcode)
+/* Macro's for creating current request and trap context macros */
+#define XETrapGetCfgMaxPktSize(cfg) ((cfg)->max_pkt_size)
+#define XETrapGetCfgCmdKey(cfg) ((cfg)->cmd_key)
+#define XETrapGetCfgFlags(cfg,e,a) \
+ memcpy((a), (cfg)->flags.e, sizeof((cfg)->flags.e))
+#define XETrapGetCfgFlagTimestamp(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapTimestamp))
+#define XETrapGetCfgFlagCmd(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapCmd))
+#define XETrapGetCfgFlagCmdKeyMod(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapCmdKeyMod))
+#define XETrapGetCfgFlagRequest(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapRequest))
+#define XETrapGetCfgFlagEvent(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapEvent))
+#define XETrapGetCfgFlagMaxPacket(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapMaxPacket))
+#define XETrapGetCfgFlagStatistics(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapStatistics))
+#define XETrapGetCfgFlagWinXY(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapWinXY))
+#define XETrapGetCfgFlagCursor(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapCursor))
+#define XETrapGetCfgFlagXInput(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapXInput))
+#define XETrapGetCfgFlagColorReplies(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapColorReplies))
+#define XETrapGetCfgFlagGrabServer(cfg,e) \
+ (BitValue((cfg)->flags.e, XETrapGrabServer))
+/* Request values are in "Xproto.h" of the flavor X_RequestType */
+#define XETrapGetCfgFlagReq(cfg,request) \
+ (BitValue((cfg)->flags.req, (request)))
+/* Event types are in "X.h" of the flavor EventType (e.g. KeyPress) */
+#define XETrapGetCfgFlagEvt(cfg,evt) \
+ (BitValue((cfg)->flags.event, (evt)))
+
+/* Fields returned int the "GetCurrent" Request */
+#define XETrapGetCurX(avail) ((avail)->cur_x)
+#define XETrapGetCurY(avail) ((avail)->cur_y)
+#define XETrapGetCurSFlags(cur,a) \
+ memcpy((a), (cur)->state_flags, sizeof((cur)->state_flags))
+#define XETrapGetCurMaxPktSize(cur) (XETrapGetCfgMaxPktSize(&((cur)->config)))
+#define XETrapGetCurCmdKey(cur) (XETrapGetCfgCmdKey(&((cur)->config)))
+/* Note: e is only pertinent for "valid" or "data" */
+#define XETrapGetCurCFlags(cur,e,a) (XETrapGetCfgFlags(&((cur)->config),e,a))
+#define XETrapGetCurFlagTimestamp(cur,e) \
+ (XETrapGetCfgFlagTimestamp(&((cur)->config),e))
+#define XETrapGetCurFlagCmd(cur,e) (XETrapGetCfgFlagCmd(&((cur)->config),e))
+#define XETrapGetCurFlagCmdKeyMod(cur,e) \
+ (XETrapGetCfgFlagCmdKeyMod(&((cur)->config),e))
+#define XETrapGetCurFlagRequest(cur,r) \
+ (XETrapGetCfgFlagRequest(&((cur)->config),r))
+#define XETrapGetCurFlagEvent(cur,e) \
+ (XETrapGetCfgFlagEvent(&((cur)->config),e))
+#define XETrapGetCurFlagMaxPacket(cur,e) \
+ (XETrapGetCfgFlagMaxPacket(&((cur)->config),e))
+#define XETrapGetCurFlagStatistics(cur,e) \
+ (XETrapGetCfgFlagStatistics(&((cur)->config),e))
+#define XETrapGetCurFlagWinXY(cur,e) \
+ (XETrapGetCfgFlagWinXY(&((cur)->config),e))
+#define XETrapGetCurFlagCursor(cur,e) \
+ (XETrapGetCfgFlagCursor(&((cur)->config),e))
+#define XETrapGetCurFlagXInput(cur,e) \
+ (XETrapGetCfgFlagXInput(&((cur)->config),e))
+#define XETrapGetCurFlagColorReplies(cur,e) \
+ (XETrapGetCfgFlagColorReplies(&((cur)->config),e))
+#define XETrapGetCurFlagGrabServer(cur,e) \
+ (XETrapGetCfgFlagGrabServer(&((cur)->config),e))
+/* Request values are in "Xproto.h" of the flavor X_RequestType */
+#define XETrapGetCurFlagReq(cur,r) (XETrapGetCfgFlagReq(&((cur)->config),r))
+/* Event types are in "X.h" of the flavor EventType (e.g. KeyPress) */
+#define XETrapGetCurFlagEvt(cur,e) (XETrapGetCfgFlagEvt(&((cur)->config),e))
+
+/* Fields returned int the "GetStatistics" Request */
+#define XETrapGetStatsReq(stat,e) ((stat)->requests[(e)])
+#define XETrapGetStatsEvt(stat,e) ((stat)->events[(e)])
+
+/* Fields returned in the "GetVersion" request */
+#define XETrapGetVersRelease(vers) ((vers)->xtrap_release)
+#define XETrapGetVersVersion(vers) ((vers)->xtrap_version)
+#define XETrapGetVersRevision(vers) ((vers)->xtrap_revision)
+
+/* Fields returned in the "GetLastInpTime" request */
+#define XETrapGetLastInpTime(time_rep) ((time_rep)->last_time)
+
+/* Expands to GET each element of the TCValues structure */
+#define XETrapGetTCReqCB(tc) ((tc)->values.req_cb)
+#define XETrapGetTCEvtCB(tc) ((tc)->values.evt_cb)
+#define XETrapGetTCTime(tc) ((tc)->values.last_time)
+/* TC specific flags */
+#define XETrapGetTCLFlags(tc,a) \
+ memcpy((a), (tc)->values.tc_flags, sizeof((tc)->values.tc_flags))
+#define XETrapGetTCFlagDeltaTimes(tc) \
+ (BitValue((tc)->values.tc_flags, XETCDeltaTimes))
+#define XETrapGetTCFlagTrapActive(tc) \
+ (BitValue((tc)->values.tc_flags, XETCTrapActive))
+#define XETrapGetTCMaxPktSize(tc) (XETrapGetCfgMaxPktSize(&((tc)->values.v)))
+#define XETrapGetTCCmdKey(tc) (XETrapGetCfgCmdKey(&((tc)->values.v)))
+/* Note: e is only pertinent for "valid" or "data" */
+#define XETrapGetTCFlags(tc,e,a) (XETrapGetCfgFlags(&((tc)->values.v),e,a))
+#define XETrapGetTCFlagTimestamp(tc,e) \
+ (XETrapGetCfgFlagTimestamp(&((tc)->values.v),e))
+#define XETrapGetTCFlagCmd(tc,e) \
+ (XETrapGetCfgFlagCmd(&((tc)->values.v),e))
+#define XETrapGetTCFlagCmdKeyMod(tc,e) \
+ (XETrapGetCfgFlagCmdKeyMod(&((tc)->values.v),e))
+#define XETrapGetTCFlagRequest(tc,r) \
+ (XETrapGetCfgFlagRequest(&((tc)->values.v),r))
+#define XETrapGetTCFlagEvent(tc,e) \
+ (XETrapGetCfgFlagEvent(&((tc)->values.v),e))
+#define XETrapGetTCFlagMaxPacket(tc,e) \
+ (XETrapGetCfgFlagMaxPacket(&((tc)->values.v),e))
+#define XETrapGetTCFlagStatistics(tc,e) \
+ (XETrapGetCfgFlagStatistics(&((tc)->values.v),e))
+#define XETrapGetTCFlagWinXY(tc,e) \
+ (XETrapGetCfgFlagWinXY(&((tc)->values.v),e))
+#define XETrapGetTCFlagCursor(tc,e) \
+ (XETrapGetCfgFlagCursor(&((tc)->values.v),e))
+#define XETrapGetTCFlagXInput(tc,e) \
+ (XETrapGetCfgFlagXInput(&((tc)->values.v),e))
+#define XETrapGetTCFlagColorReplies(tc,e) \
+ (XETrapGetCfgFlagColorReplies(&((tc)->values.v),e))
+#define XETrapGetTCFlagGrabServer(tc,e) \
+ (XETrapGetCfgFlagGrabServer(&((tc)->values.v),e))
+/* Request values are in "Xproto.h" of the flavor X_RequestType */
+#define XETrapGetTCFlagReq(tc,r) \
+ (XETrapGetCfgFlagReq(&((tc)->values.v),r))
+/* Event types are in "X.h" of the flavor EventType (e.g. KeyPress) */
+#define XETrapGetTCFlagEvt(tc,e) \
+ (XETrapGetCfgFlagEvt(&((tc)->values.v),e))
+/* The following can/should *not* be set directly! */
+#define XETrapGetNext(tc) ((tc)->next)
+#define XETrapGetDpy(tc) ((tc)->dpy)
+#define XETrapGetEventBase(tc) ((tc)->eventBase)
+#define XETrapGetErrorBase(tc) ((tc)->errorBase)
+#define XETrapGetExtOpcode(tc) ((tc)->extOpcode)
+#define XETrapGetXBuff(tc) ((tc)->xbuff)
+#define XETrapGetXMaxSize(tc) ((tc)->xmax_size)
+#define XETrapGetExt(tc) ((tc)->ext_data)
+#define XETrapGetDirty(tc) ((tc)->dirty)
+#define XETrapGetValues(tc) memcpy((x),(tc)->values,sizeof((tc)->values))
+#define XETrapGetEventFunc(tc) ((tc)->eventFunc)
+
+#define XETrapGetHeaderCount(phdr) ((phdr)->count)
+#define XETrapGetHeaderTimestamp(phdr) ((phdr)->timestamp)
+#define XETrapGetHeaderType(phdr) ((phdr)->type)
+#define XETrapGetHeaderScreen(phdr) ((phdr)->screen)
+#define XETrapGetHeaderWindowX(phdr) ((phdr)->win_x)
+#define XETrapGetHeaderWindowY(phdr) ((phdr)->win_y)
+#define XETrapGetHeaderClient(phdr) ((phdr)->client)
+
+#define XEGetRelease(tc) ((tc)->release)
+#define XEGetVersion(tc) ((tc)->version)
+#define XEGetRevision(tc) ((tc)->revision)
+
+/* Condition handling macros */
+#if !defined(vms) && \
+ (!defined(_InitExceptionHandling) || !defined(_ClearExceptionHandling))
+# ifndef _SetSIGBUSHandling
+# ifdef SIGBUS
+# define _SetSIGBUSHandling(rtn) (void)signal(SIGBUS, rtn)
+# else
+# define _SetSIGBUSHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGSEGVHandling
+# ifdef SIGSEGV
+# define _SetSIGSEGVHandling(rtn) (void)signal(SIGSEGV, rtn)
+# else
+# define _SetSIGSEGVHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGFPEHandling
+# ifdef SIGFPE
+# define _SetSIGFPEHandling(rtn) (void)signal(SIGFPE, rtn)
+# else
+# define _SetSIGFPEHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGILLHandling
+# ifdef SIGILL
+# define _SetSIGILLHandling(rtn) (void)signal(SIGILL, rtn)
+# else
+# define _SetSIGILLHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGSYSHandling
+# ifdef SIGSYS
+# define _SetSIGSYSHandling(rtn) (void)signal(SIGSYS, rtn)
+# else
+# define _SetSIGSYSHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGHUPHandling
+# ifdef SIGHUP
+# define _SetSIGHUPHandling(rtn) (void)signal(SIGHUP, rtn)
+# else
+# define _SetSIGHUPHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGPIPEHandling
+# ifdef SIGPIPE
+# define _SetSIGPIPEHandling(rtn) (void)signal(SIGPIPE, rtn)
+# else
+# define _SetSIGPIPEHandling(rtn) /* */
+# endif
+# endif
+# ifndef _SetSIGTERMHandling
+# ifdef SIGTERM
+# define _SetSIGTERMHandling(rtn) (void)signal(SIGTERM, rtn)
+# else
+# define _SetSIGTERMHandling(rtn) /* */
+# endif
+# endif
+#endif
+#ifndef _InitExceptionHandling
+#ifdef vms
+#define _InitExceptionHandling(rtn) \
+ VAXC$ESTABLISH(rtn) /* VMS exception handler */
+#else /* vms */
+#define _InitExceptionHandling(rtn) \
+ _SetSIGBUSHandling(rtn); /* Bus error */ \
+ _SetSIGSEGVHandling(rtn); /* Accvio/Segment error */ \
+ _SetSIGFPEHandling(rtn); /* Floating point exception */ \
+ _SetSIGILLHandling(rtn); /* Illegal instruction */ \
+ _SetSIGSYSHandling(rtn); /* Param error in sys call */ \
+ _SetSIGHUPHandling(rtn); \
+ _SetSIGPIPEHandling(rtn); \
+ _SetSIGTERMHandling(rtn)
+#endif /* vms */
+#endif /* _InitExceptionHandling */
+
+#ifndef _ClearExceptionHandling
+#ifdef vms
+#define _ClearExceptionHandling() \
+ LIB$REVERT()
+#else
+#define _ClearExceptionHandling() \
+ _SetSIGBUSHandling(SIG_DFL); /* Bus error */ \
+ _SetSIGSEGVHandling(SIG_DFL); /* Accvio/Segment error */ \
+ _SetSIGFPEHandling(SIG_DFL); /* Floating point exception */ \
+ _SetSIGILLHandling(SIG_DFL); /* Illegal instruction */ \
+ _SetSIGSYSHandling(SIG_DFL); /* Param error in sys call */ \
+ _SetSIGHUPHandling(SIG_DFL); \
+ _SetSIGPIPEHandling(SIG_DFL); \
+ _SetSIGTERMHandling(SIG_DFL)
+#endif /* vms */
+#endif /* _ClearExceptionHandling */
+
+#endif /* __XTRAPEMACROS__ */
--- /dev/null
+/* $XFree86$ */
+#ifndef __XTRAPLIB__
+#define __XTRAPLIB__
+
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991, 1994 by Digital Equipment Corp.,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This header file describes all the structures/constants required
+ * for interfacing with the client toolkit *except* the common
+ * client/extension definitions in xtrapdi.h. Namely, *no* extension-
+ * only information or client/extension information can be found here.
+ */
+#ifdef SMT
+#define NEED_EVENTS
+#define NEED_REPLIES
+#endif
+#include <X11/Xlib.h>
+#include <X11/Intrinsic.h>
+#include <X11/extensions/xtrapdi.h>
+#include <X11/extensions/xtrapemacros.h>
+
+typedef struct /* Callback structure */
+{
+ void_function func;
+ BYTE *data;
+} XETrapCB;
+
+/* Data structure for setting trap context */
+typedef struct
+{
+ CARD8 tc_flags[2L]; /* Toolkit-side specific flags */
+ XETrapCfg v; /* XTrap configuration values */
+ XETrapCB *req_cb; /* Pointer to Request Callbacks */
+ XETrapCB *evt_cb; /* Pointer to Event Callbacks (starting at 2) */
+ CARD32 last_time B32; /* Last (delta) timestamp */
+} XETCValues;
+
+ /* bits 0 thru 6 are formerly "families" (now obsolete) */
+#define XETCDeltaTimes 7
+#define XETCTrapActive 8
+ /* bits 9 thru 15 are reserved for future expansion */
+
+/* Values bit masks (used when determining what's dirty */
+#define TCStatistics (1L<<0L)
+#define TCRequests (1L<<1L)
+#define TCEvents (1L<<2L)
+#define TCMaxPacket (1L<<3L)
+#define TCCmdKey (1L<<4L)
+#define TCTimeStamps (1L<<5L)
+#define TCWinXY (1L<<6L)
+#define TCXInput (1L<<7L)
+#define TCReqCBs (1L<<8L)
+#define TCEvtCBs (1L<<9L)
+#define TCCursor (1L<<10L)
+#define TCColorReplies (1L<<11L)
+#define TCGrabServer (1L<<12L)
+
+/* This is the representation we use in the library code for XLib transport */
+typedef struct {
+ int type;
+ unsigned long serial;
+ Bool synthetic;
+ Display *display;
+ int detail;
+ unsigned long idx;
+ unsigned char data[sz_EventData];
+} XETrapDataEvent;
+
+/* Trap Context structure for maintaining XTrap State for client */
+typedef struct _XETC
+{
+ struct _XETC *next; /* Ptr to next linked-listed TC */
+ Display *dpy; /* Display ptr of current TC */
+ INT32 eventBase /*B32*/; /* First event value */
+ INT32 errorBase /*B32*/; /* First error value */
+ INT32 extOpcode /*B32*/; /* Major opcode of the extension */
+ BYTE *xbuff; /* Pointer to buffer for XLib Communications */
+ CARD16 xmax_size /*B16*/; /* Max Size of a request */
+ XExtData *ext_data; /* hook for extension to hang data */
+ /*
+ * The following are initialized with the client-side version number
+ * However, when either a GetAvailable or GetVersion reply is received,
+ * these values are updated with the *oldest* version numbers.
+ */
+ CARD16 release /*B16*/; /* The extension release number */
+ CARD16 version /*B16*/; /* The xtrap extension version number */
+ CARD16 revision /*B16*/; /* The xtrap extension revision number */
+ CARD16 protocol /*B16*/; /* The xtrap extension protocol number */
+ unsigned dirty /*B32*/; /* cache dirty bits */
+ XETCValues values; /* shadow structure of values */
+ Boolean (*eventFunc[XETrapNumberEvents])(XETrapDataEvent *event, struct _XETC *tc);
+} XETC;
+
+
+#endif /* __XTRAPLIB__ */
--- /dev/null
+/* $XFree86$ */
+#ifndef __XTRAPLIBP__
+#define __XTRAPLIBP__
+
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991, 1994 by Digital Equipment Corp.,
+Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This header file contains the function prototypes for client/toolkit
+ * routines sorted by module (globally defined routines *only*).
+ */
+
+/* XEConTxt.c */
+XETC *XECreateTC (Display *dpy , CARD32 valuemask , XETCValues *value );
+int XEChangeTC (XETC *tc , CARD32 mask , XETCValues *values );
+void XEFreeTC (XETC *tc );
+int XETrapSetMaxPacket (XETC *tc , Bool set_flag , CARD16 size );
+int XETrapSetCommandKey (XETC *tc , Bool set_flag , KeySym cmd_key ,
+ Bool mod_flag );
+int XETrapSetTimestamps (XETC *tc , Bool set_flag , Bool delta_flag );
+int XETrapSetWinXY (XETC *tc , Bool set_flag );
+int XETrapSetCursor (XETC *tc , Bool set_flag );
+int XETrapSetXInput (XETC *tc , Bool set_flag );
+int XETrapSetColorReplies (XETC *tc , Bool set_flag );
+int XETrapSetGrabServer (XETC *tc , Bool set_flag );
+int XETrapSetStatistics (XETC *tc , Bool set_flag );
+int XETrapSetRequests (XETC *tc , Bool set_flag , ReqFlags requests );
+int XETrapSetEvents (XETC *tc , Bool set_flag , EventFlags events );
+Bool XESetCmdGateState (XETC *tc , CARD8 type, Bool *gate_closed ,
+ CARD8 *next_key , Bool *key_ignore );
+
+/* XERqsts.c */
+int XEFlushConfig (XETC *tc );
+int XEResetRequest (XETC *tc );
+int XEGetVersionRequest (XETC *tc , XETrapGetVersRep *ret );
+int XEGetLastInpTimeRequest (XETC *tc , XETrapGetLastInpTimeRep *ret );
+int XEGetAvailableRequest (XETC *tc , XETrapGetAvailRep *ret );
+int XEStartTrapRequest (XETC *tc );
+int XEStopTrapRequest (XETC *tc );
+int XESimulateXEventRequest (XETC *tc , CARD8 type , CARD8 detail ,
+ CARD16 x , CARD16 y , CARD8 screen );
+int XEGetCurrentRequest (XETC *tc , XETrapGetCurRep *ret );
+int XEGetStatisticsRequest (XETC *tc , XETrapGetStatsRep *ret );
+
+/* XECallBcks.c */
+int XEAddRequestCB (XETC *tc , CARD8 req , void_function func , BYTE *data );
+int XEAddRequestCBs (XETC *tc , ReqFlags req_flags , void_function func ,
+ BYTE *data );
+int XEAddEventCB (XETC *tc , CARD8 evt , void_function func , BYTE *data );
+int XEAddEventCBs (XETC *tc , EventFlags evt_flags , void_function func ,
+ BYTE *data );
+
+/* The following seem to never be used. Perhaps they should be removed */
+void XERemoveRequestCB (XETC *tc, CARD8 req);
+void XERemoveRequestCBs (XETC *tc, ReqFlags req_flags);
+void XERemoveAllRequestCBs (XETC *tc);
+void XERemoveEventCB (XETC *tc, CARD8 evt);
+void XERemoveEventCBs (XETC *tc, EventFlags evt_flags);
+void XERemoveAllEventCBs (XETC *tc);
+
+
+/* XEDsptch.c */
+Boolean XETrapDispatchXLib (XETrapDataEvent *event , XETC *tc);
+
+/* XEWrappers.c */
+Boolean XETrapDispatchEvent (XEvent *pevent , XETC *tc );
+XtInputMask XETrapAppPending (XtAppContext app);
+void XETrapAppMainLoop (XtAppContext app , XETC *tc );
+int XETrapAppWhileLoop (XtAppContext app , XETC *tc , Bool *done );
+int XETrapWaitForSomething (XtAppContext app );
+Boolean (*XETrapSetEventHandler(XETC *tc, CARD32 id, Boolean (*pfunc)(XETrapDataEvent *event, XETC *tc))) (XETrapDataEvent *event, XETC *tc);
+
+/* XEPrInfo.c */
+void XEPrintRelease (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintTkRelease ( FILE *ofp, XETC *tc);
+void XEPrintPlatform (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintAvailFlags (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintAvailPktSz (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintStateFlags (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintMajOpcode (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintCurXY (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintTkFlags (FILE *ofp , XETC *tc );
+void XEPrintLastTime (FILE *ofp , XETC *tc );
+void XEPrintCfgFlags (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintRequests (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintEvents (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintCurPktSz (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintCmdKey (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintEvtStats (FILE *ofp , XETrapGetStatsRep *pstats , XETC *tc);
+void XEPrintReqStats (FILE *ofp , XETrapGetStatsRep *pstats , XETC *tc);
+void XEPrintAvail (FILE *ofp , XETrapGetAvailRep *pavail );
+void XEPrintTkState (FILE *ofp , XETC *tc );
+void XEPrintCurrent (FILE *ofp , XETrapGetCurRep *pcur );
+void XEPrintStatistics (FILE *ofp , XETrapGetStatsRep *pstats, XETC *tc );
+
+/* XEStrMap.c */
+INT16 XEEventStringToID (char *string );
+INT16 XERequestStringToID (char *string );
+CARD32 XEPlatformStringToID (char *string );
+char *XEEventIDToString (CARD8 id , XETC *tc);
+char *XERequestIDToExtString (register CARD8 id , XETC *tc);
+char *XERequestIDToString (CARD8 id , XETC *tc);
+char *XEPlatformIDToString (CARD32 id );
+
+/* XETrapInit.c */
+Bool XETrapQueryExtension (Display *dpy,INT32 *event_base_return,
+ INT32 *error_base_return, INT32 *opcode_return);
+
+
+#endif /* __XTRAPLIBP__ */
--- /dev/null
+/* $XFree86: xc/include/extensions/xtrapproto.h,v 1.1 2001/11/02 23:29:26 dawes Exp $ */
+
+#ifndef __XTRAPPROTO__
+#define __XTRAPPROTO__
+
+/*****************************************************************************
+Copyright 1987, 1988, 1989, 1990, 1991 by Digital Equipment Corp., Maynard, MA
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+*****************************************************************************/
+/*
+ *
+ * CONTRIBUTORS:
+ *
+ * Dick Annicchiarico
+ * Robert Chesler
+ * Dan Coutu
+ * Gene Durso
+ * Marc Evans
+ * Alan Jamison
+ * Mark Henry
+ * Ken Miller
+ *
+ * DESCRIPTION:
+ * This header file contains the function prototypes for extension
+ * routines sorted by module (globally defined routines *only*).
+ */
+#ifndef Bool
+# define Bool int
+#endif
+/* xtrapdi.c */
+int XETrapDestroyEnv (pointer value , XID id );
+void XETrapCloseDown ( ExtensionEntry *extEntry );
+Bool XETrapRedirectDevices (void );
+void DEC_XTRAPInit (void );
+int XETrapCreateEnv (ClientPtr client );
+int XETrapDispatch (ClientPtr client );
+int sXETrapDispatch (ClientPtr client );
+int XETrapReset (xXTrapReq *request , ClientPtr client );
+int XETrapGetAvailable (xXTrapGetReq *request , ClientPtr client );
+int XETrapGetCurrent (xXTrapReq *request , ClientPtr client );
+int XETrapGetStatistics (xXTrapReq *request , ClientPtr client );
+int XETrapConfig (xXTrapConfigReq *request , ClientPtr client );
+int XETrapStartTrap (xXTrapReq *request , ClientPtr client );
+int XETrapStopTrap (xXTrapReq *request , ClientPtr client );
+int XETrapGetVersion (xXTrapGetReq *request , ClientPtr client );
+int XETrapGetLastInpTime (xXTrapReq *request , ClientPtr client );
+int XETrapRequestVector (ClientPtr client );
+int XETrapKeyboard (xEvent *x_event , DevicePtr keybd , int count );
+#ifndef VECTORED_EVENTS
+int XETrapPointer (xEvent *x_event , DevicePtr ptrdev , int count );
+#else
+int XETrapEventVector (ClientPtr client , xEvent *x_event );
+#endif
+void XETrapStampAndMail (xEvent *x_event );
+void sReplyXTrapDispatch (ClientPtr client , int size , char *reply );
+int XETrapWriteXLib (XETrapEnv *penv , BYTE *data , CARD32 nbytes );
+
+/* xtrapddmi.c */
+void XETrapPlatformSetup (void );
+int XETrapSimulateXEvent (xXTrapInputReq *request , ClientPtr client );
+
+/* xtrapdiswap.c */
+int sXETrapReset (xXTrapReq *request , ClientPtr client );
+int sXETrapGetAvailable (xXTrapGetReq *request , ClientPtr client );
+int sXETrapConfig (xXTrapConfigReq *request , ClientPtr client );
+int sXETrapStartTrap (xXTrapReq *request , ClientPtr client );
+int sXETrapStopTrap (xXTrapReq *request , ClientPtr client );
+int sXETrapGetCurrent (xXTrapReq *request , ClientPtr client );
+int sXETrapGetStatistics (xXTrapReq *request , ClientPtr client );
+int sXETrapSimulateXEvent (xXTrapInputReq *request , ClientPtr client );
+int sXETrapGetVersion (xXTrapGetReq *request , ClientPtr client );
+int sXETrapGetLastInpTime (xXTrapReq *request , ClientPtr client );
+void sReplyXETrapGetAvail (ClientPtr client , int size , char *reply );
+void sReplyXETrapGetVers (ClientPtr client , int size , char *reply );
+void sReplyXETrapGetLITim (ClientPtr client , int size , char *reply );
+void sReplyXETrapGetCur (ClientPtr client , int size , char *reply );
+void sReplyXETrapGetStats (ClientPtr client , int size , char *reply );
+void sXETrapHeader (XETrapHeader *hdr );
+void XETSwSimpleReq (xReq *data );
+void XETSwResourceReq (xResourceReq *data );
+void XETSwCreateWindow (xCreateWindowReq *data , ClientPtr client );
+void XETSwChangeWindowAttributes (xChangeWindowAttributesReq *data , ClientPtr client );
+void XETSwReparentWindow (xReparentWindowReq *data );
+void XETSwConfigureWindow (xConfigureWindowReq *data , ClientPtr client );
+void XETSwInternAtom (xInternAtomReq *data );
+void XETSwChangeProperty (xChangePropertyReq *data );
+void XETSwDeleteProperty (xDeletePropertyReq *data );
+void XETSwGetProperty (xGetPropertyReq *data );
+void XETSwSetSelectionOwner (xSetSelectionOwnerReq *data );
+void XETSwConvertSelection (xConvertSelectionReq *data );
+void XETSwSendEvent (xSendEventReq *data );
+void XETSwGrabPointer (xGrabPointerReq *data );
+void XETSwGrabButton (xGrabButtonReq *data );
+void XETSwUngrabButton (xUngrabButtonReq *data );
+void XETSwChangeActivePointerGrab (xChangeActivePointerGrabReq *data );
+void XETSwGrabKeyboard (xGrabKeyboardReq *data );
+void XETSwGrabKey (xGrabKeyReq *data );
+void XETSwUngrabKey (xUngrabKeyReq *data );
+void XETSwGetMotionEvents (xGetMotionEventsReq *data );
+void XETSwTranslateCoords (xTranslateCoordsReq *data );
+void XETSwWarpPointer (xWarpPointerReq *data );
+void XETSwSetInputFocus (xSetInputFocusReq *data );
+void XETSwOpenFont (xOpenFontReq *data );
+void XETSwListFonts (xListFontsReq *data );
+void XETSwListFontsWithInfo (xListFontsWithInfoReq *data );
+void XETSwSetFontPath (xSetFontPathReq *data );
+void XETSwCreatePixmap (xCreatePixmapReq *data );
+void XETSwCreateGC (xCreateGCReq *data , ClientPtr client );
+void XETSwChangeGC (xChangeGCReq *data , ClientPtr client );
+void XETSwCopyGC (xCopyGCReq *data );
+void XETSwSetDashes (xSetDashesReq *data );
+void XETSwSetClipRectangles (xSetClipRectanglesReq *data , ClientPtr client );
+void XETSwClearToBackground (xClearAreaReq *data );
+void XETSwCopyArea (xCopyAreaReq *data );
+void XETSwCopyPlane (xCopyPlaneReq *data );
+void XETSwPoly (xPolyPointReq *data , ClientPtr client );
+void XETSwFillPoly (xFillPolyReq *data , ClientPtr client );
+void XETSwPutImage (xPutImageReq *data );
+void XETSwGetImage (xGetImageReq *data );
+void XETSwPolyText (xPolyTextReq *data );
+void XETSwImageText (xImageTextReq *data );
+void XETSwCreateColormap (xCreateColormapReq *data );
+void XETSwCopyColormapAndFree (xCopyColormapAndFreeReq *data );
+void XETSwAllocColor (xAllocColorReq *data );
+void XETSwAllocNamedColor (xAllocNamedColorReq *data );
+void XETSwAllocColorCells (xAllocColorCellsReq *data );
+void XETSwAllocColorPlanes (xAllocColorPlanesReq *data );
+void XETSwFreeColors (xFreeColorsReq *data , ClientPtr client );
+void XETSwStoreColors (xStoreColorsReq *data , ClientPtr client );
+void XETSwStoreNamedColor (xStoreNamedColorReq *data );
+void XETSwQueryColors (xQueryColorsReq *data , ClientPtr client );
+void XETSwLookupColor (xLookupColorReq *data );
+void XETSwCreateCursor (xCreateCursorReq *data );
+void XETSwCreateGlyphCursor (xCreateGlyphCursorReq *data );
+void XETSwRecolorCursor (xRecolorCursorReq *data );
+void XETSwQueryBestSize (xQueryBestSizeReq *data );
+void XETSwQueryExtension (xQueryExtensionReq *data );
+void XETSwChangeKeyboardMapping (xChangeKeyboardMappingReq *data );
+void XETSwChangeKeyboardControl (xChangeKeyboardControlReq *data , ClientPtr client );
+void XETSwChangePointerControl (xChangePointerControlReq *data );
+void XETSwSetScreenSaver (xSetScreenSaverReq *data );
+void XETSwChangeHosts (xChangeHostsReq *data );
+void XETSwRotateProperties (xRotatePropertiesReq *data , ClientPtr client );
+void XETSwNoOperation (xReq *data );
+#ifdef vms
+void SwapLongs (long *list , unsigned long count );
+void SwapShorts (short *list , unsigned long count );
+int SwapColorItem (xColorItem *pItem );
+#endif /* vms */
+
+
+#endif /* __XTRAPPROTO__ */
projects / pkgs / xorg / proto / x11proto-trap.git / commitdiff