phy: rockchip-emmc: configure frequency range and drive impedance

Signal integrity analysis has suggested we set these values. Do this in
power_on(), so that they get reconfigured after suspend/resume.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
index 48cbe69..f2f75cf 100644 (file)
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/phy-rockchip-emmc.c
@@ -56,6 +56,19 @@
 #define PHYCTRL_DLLRDY_SHIFT   0x5
 #define PHYCTRL_DLLRDY_DONE    0x1
 #define PHYCTRL_DLLRDY_GOING   0x0
+#define PHYCTRL_FREQSEL_200M   0x0
+#define PHYCTRL_FREQSEL_50M    0x1
+#define PHYCTRL_FREQSEL_100M   0x2
+#define PHYCTRL_FREQSEL_150M   0x3
+#define PHYCTRL_FREQSEL_MASK   0x3
+#define PHYCTRL_FREQSEL_SHIFT  0xc
+#define PHYCTRL_DR_MASK                0x7
+#define PHYCTRL_DR_SHIFT       0x4
+#define PHYCTRL_DR_50OHM       0x0
+#define PHYCTRL_DR_33OHM       0x1
+#define PHYCTRL_DR_66OHM       0x2
+#define PHYCTRL_DR_100OHM      0x3
+#define PHYCTRL_DR_40OHM       0x4
 
 struct rockchip_emmc_phy {
        unsigned int    reg_offset;
@@ -154,6 +167,20 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
        struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
        int ret = 0;
 
+       /* DLL operation: 200 MHz */
+       regmap_write(rk_phy->reg_base,
+                    rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+                    HIWORD_UPDATE(PHYCTRL_FREQSEL_200M,
+                                  PHYCTRL_FREQSEL_MASK,
+                                  PHYCTRL_FREQSEL_SHIFT));
+
+       /* Drive impedance: 50 Ohm */
+       regmap_write(rk_phy->reg_base,
+                    rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+                    HIWORD_UPDATE(PHYCTRL_DR_50OHM,
+                                  PHYCTRL_DR_MASK,
+                                  PHYCTRL_DR_SHIFT));
+
        /* Power up emmc phy analog blocks */
        ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
        if (ret)