board: spacemit: Remove k1-x.env file

Remove k1-x.env file.

Change-Id: I199d7b8d6984b963808e41713ffbeb4b41e8313a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/board/spacemit/k1-x/k1-x.env b/board/spacemit/k1-x/k1-x.env
deleted file mode 100644 (file)
index 3b30e07..0000000
--- a/board/spacemit/k1-x/k1-x.env
+++ /dev/null
@@ -1,165 +0,0 @@
-// Common parameter
-earlycon=sbi
-console=ttyS0,115200
-init=/init
-bootdelay=0
-baudrate=115200
-loglevel=8
-stderr=serial
-stdin=serial,usbkbd
-stdout=serial
-
-//partitions/mtdparts/mtdids would set while flashing env.bin
-
-// Nor flash rootfs device
-nor_root=/dev/mtdblock6
-nor_rootfstype=squashfs
-
-// eMMC/SDCard rootfs device
-mmc_rootfstype=ext4
-
-// Get "rootfs" partition number in decimal, and set var "mmc_root"
-// Variable "boot_devnum" is set during board_lat_init()
-set_mmc_root=part number mmc ${boot_devnum} rootfs rootfs_part; \
-             setexpr rootfs_part ${rootfs_part} + 0; \
-             setenv mmc_root "/dev/mmcblk${boot_devnum}p${rootfs_part}";
-
-set_nvme_root=part number nvme ${boot_devnum} rootfs rootfs_part; \
-             setexpr rootfs_part ${rootfs_part} + 0; \
-             setenv nvme_root "/dev/nvme${boot_devnum}n1p${rootfs_part}";
-
-//override here, otherwise gen random addr and save to eeprom by uboot
-//ethaddr=fe:fe:fe:22:22:01
-//eth1addr=fe:fe:fe:22:22:02
-
-ipaddr=10.0.92.100
-netmask=255.255.255.0
-serverip=10.0.92.134
-gatewayip=10.0.92.1
-net_data_path=net_flash_file/net_flash_file/
-
-preboot=
-kernel_addr_r=0x10000000
-ramdisk_addr=0x20000000
-ramdisk_size=-
-ramdisk_combo=-
-knl_name=Image.itb
-ramdisk_name=initramfs-generic.img
-dtb_dir=
-dtb_name=k1-x_evb.dtb
-dtb_addr=0x1F000000
-splashfile=bianbu.bmp
-mdio_intf=
-phyaddr0=1
-phy_link_time=10000
-netdev=eth0
-
-// Common boot args
-commonargs=setenv bootargs earlycon=${earlycon} earlyprintk console=tty1 console=${console} loglevel=${loglevel} clk_ignore_unused swiotlb=65536 rdinit=${init}
-
-//detect product_name from env and select dtb file to load
-dtb_env=if test -n "${product_name}"; then \
-                if test "${product_name}" = k1_evb; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_evb.dtb; \
-                elif test "${product_name}" = k1_deb1; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_deb1.dtb; \
-                elif test "${product_name}" = k1_deb2; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_deb2.dtb; \
-                elif test "${product_name}" = k1_hs450; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_hs450.dtb; \
-                elif test "${product_name}" = k1_kx312; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_kx312.dtb; \
-                elif test "${product_name}" = k1_mingo; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_mingo.dtb; \
-                elif test "${product_name}" = k1_MINI-PC; then \
-                    setenv dtb_name ${dtb_dir}/k1-x_MINI-PC.dtb; \
-                else \
-                    echo "falling to default dtb: ${dtb_dir}/${product_name}.dtb"; \
-                    setenv dtb_name  ${dtb_dir}/${product_name}.dtb; \
-                fi; \
-            fi;
-
-detect_dtb=echo "product_name: ${product_name}"; run dtb_env; echo "select ${dtb_name} to load";
-
-loadknl=echo "Loading kernel..."; \
-            load ${bootfs_devname} ${boot_devnum}:${bootfs_part} ${kernel_addr_r} ${knl_name};
-
-loadramdisk=echo "Loading ramdisk ..."; \
-            if load ${bootfs_devname} ${boot_devnum}:${bootfs_part} ${ramdisk_addr} ${ramdisk_name}; then \
-                size ${bootfs_devname} ${boot_devnum}:${bootfs_part} ${ramdisk_name}; \
-                setenv ramdisk_size ${filesize}; \
-                setenv ramdisk_combo ${ramdisk_addr}:${ramdisk_size}; \
-            else \
-                echo "load ramdisk from bootfs fail, use built-in ramdisk"; \
-                setenv ramdisk_addr -; \
-            fi;
-
-loaddtb=echo "Loading dtb..."; \
-            if load ${bootfs_devname} ${boot_devnum}:${bootfs_part} ${dtb_addr} ${dtb_name}; then \
-            else \
-                echo "load dtb from bootfs fail, use built-in dtb"; \
-                setenv dtb_addr ""; \
-            fi;
-
-// Nor+ssd boot combo
-set_nor_args=setenv bootargs ${bootargs} mtdparts=${mtdparts} root=${nvme_root} rootfstype=ext4
-nor_boot=echo "Try to boot from NVMe ..."; \
-         run commonargs; \
-         run set_nvme_root; \
-         run set_nor_args; \
-         run detect_dtb; \
-         run loadknl; \
-         run loaddtb; \
-         run loadramdisk; \
-         bootm ${kernel_addr_r} ${ramdisk_combo} ${dtb_addr}; \
-         echo "########### boot kernel failed by default config, check your boot config #############"
-
-//##############################################################################
-// eMMC/SDCard boot
-//##############################################################################
-set_mmc_args=setenv bootargs "${bootargs}" root=${mmc_root} rootwait rootfstype=${mmc_rootfstype};
-
-mmc_boot=echo "Try to boot from MMC${boot_devnum} ..."; \
-         run commonargs; \
-         run set_mmc_root; \
-         run set_mmc_args; \
-         run detect_dtb; \
-         run loadknl; \
-         run loaddtb; \
-         run loadramdisk; \
-         bootm ${kernel_addr_r} ${ramdisk_combo} ${dtb_addr}; \
-         echo "########### boot kernel failed by default config, check your boot config #############"
-
-// Variable "boot_device" is set during board_late_init()
-autoboot=if test ${boot_device} = nand; then \
-                run nand_boot; \
-        elif test ${boot_device} = nor; then \
-                run nor_boot; \
-        elif test ${boot_device} = mmc; then \
-                run mmc_boot; \
-        fi;
-
-bootcmd=run autoboot; echo "run autoboot"
-
-// Boot menu definitions
-boot_default=echo "Current Boot Device: ${boot_device}"
-flash_default=echo "Returning to Boot Menu..."
-flash_from_usb=echo "recovery from usb...... "; \
-                                         flash_image usb;
-flash_from_mmc=echo "recovery from mmc...... " \
-                                         flash_image mmc;
-flash_from_net=echo "recovery from net...... " \
-                                         flash_image net;
-
-bootmenu_delay=5
-bootmenu_0="-------- Boot Options --------"=run boot_default
-bootmenu_1="Boot from Nor"=run nor_boot
-bootmenu_2="Boot from Nand"=run nand_boot
-bootmenu_3="Boot from MMC"=run mmc_boot
-bootmenu_4="Autoboot"=run autoboot
-bootmenu_5="Show current Boot Device"=run boot_default
-bootmenu_6="-------- Flash Options --------"=run flash_default
-bootmenu_7="recovery from usb"=run flash_from_usb
-bootmenu_8="recovery from mmc"=run flash_from_mmc
-bootmenu_9="recovery from net"=run flash_from_net
-