ARM: omap3: evm: Fix 'fitImage' booting

This commit sets two additional variables in the default BOOTCOMMAND.
Adding 'boot=mmc' and 'addr_fit=0x8b000000' removes the need for a
special 'uEnv.txt' to be created. The 'addr_fit' variable is the key
piece here. It is normally defined as 0x90000000, in the macro
DEFAULT_FIT_TI_ARGS. For this OMAP34XX board, 0x8b000000 works without
touching other varibles. This was tested with a 'fitImage' created
using the following FIT source:

----------------------------------------------------------------------
/dts-v1/;

/ {
	description = "Simple image with single Linux kernel and FDT blob";
	#address-cells = <1>;

	images {
		kernel {
			description = "Linux kernel: omap2plus";
			data = /incbin/("./zImage");
			type = "kernel";
			arch = "arm";
			os = "linux";
			compression = "none";
			load = <0x80008000>;
			entry = <0x80008000>;
			hash-1 {
				algo = "sha256";
			};
		};
		fdt-omap3-evm.dtb {
			description = "FDT: omap3-evm.dtb";
			data = /incbin/("./omap3-evm.dtb");
			type = "flat_dt";
			arch = "arm";
			compression = "none";
			load = <0x8ff00000>;
			hash-1 {
				algo = "sha256";
			};
		};
	};

	configurations {
		default = "conf-omap3-evm.dtb";
		conf-omap3-evm.dtb {
			description = "Boot Linux kernel with FDT blob";
			kernel = "kernel";
			fdt = "fdt-omap3-evm.dtb";
		};
	};
};
----------------------------------------------------------------------

Additionally, the default environment is now stored in "uboot.env" on
the FAT partition of MMC '0'.

Fixes: 11e2ab3f0b ("ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGS")
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>

diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index 41b197d..aa7a55e 100644 (file)
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run envboot; run distro_bootcmd"
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then setenv boot mmc; setenv addr_fit 0x8b000000; run update_to_fit; run mmcboot; fi; run envboot; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
@@ -55,7 +55,10 @@ CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y