CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOOTP_DNS=y
+CONFIG_DM=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_DAVINCI_SPI=y
-CONFIG_OF_LIBFDT=y
#define CONFIG_USE_NAND
/*
+* Disable DM_* for SPL build and can be re-enabled after adding
+* DM support in SPL
+*/
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_I2C
+#undef CONFIG_DM_I2C_COMPAT
+#endif
+/*
* SoC Configuration
*/
#define CONFIG_MACH_OMAPL138_LCDK
/*
* Serial Driver info
*/
+#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
+#if !defined(CONFIG_DM_SERIAL)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#endif
#define CONFIG_SPI
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
/*
* I2C Configuration
*/
-#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DAVINCI
#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */