mmc: at91-mci: remove obsolete driver
authorLudovic Desroches <ludovic.desroches@atmel.com>
Mon, 29 Oct 2012 14:27:55 +0000 (15:27 +0100)
committerChris Ball <cjb@laptop.org>
Thu, 6 Dec 2012 18:54:41 +0000 (13:54 -0500)
The at91-mci driver is not needed anymore since the atmel-mci driver now
supports all Atmel devices.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
MAINTAINERS
arch/arm/mach-at91/include/mach/board.h
drivers/mmc/host/Kconfig
drivers/mmc/host/Makefile
drivers/mmc/host/at91_mci.c [deleted file]
drivers/mmc/host/at91_mci.h [deleted file]

index e73060f..d2189fb 100644 (file)
@@ -1352,14 +1352,6 @@ S:       Maintained
 F:     drivers/atm/
 F:     include/linux/atm*
 
-ATMEL AT91 MCI DRIVER
-M:     Ludovic Desroches <ludovic.desroches@atmel.com>
-L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:     http://www.atmel.com/products/AT91/
-W:     http://www.at91.com/
-S:     Maintained
-F:     drivers/mmc/host/at91_mci.c
-
 ATMEL AT91 / AT32 MCI DRIVER
 M:     Ludovic Desroches <ludovic.desroches@atmel.com>
 S:     Maintained
index c55a436..a0d92a9 100644 (file)
@@ -70,16 +70,6 @@ struct at91_cf_data {
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
-  /* at91_mci platform config */
-struct at91_mmc_data {
-       int             det_pin;        /* card detect IRQ */
-       unsigned        slot_b:1;       /* uses Slot B */
-       unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
-       int             wp_pin;         /* (SD) writeprotect detect */
-       int             vcc_pin;        /* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
   /* atmel-mci platform config */
 extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
 
index 9bf10e7..5c7c846 100644 (file)
@@ -270,26 +270,8 @@ config MMC_AU1X
 
          If unsure, say N.
 
-choice
-       prompt "Atmel SD/MMC Driver"
-       depends on AVR32 || ARCH_AT91
-       default MMC_ATMELMCI if AVR32
-       help
-         Choose which driver to use for the Atmel MCI Silicon
-
-config MMC_AT91
-       tristate "AT91 SD/MMC Card Interface support (DEPRECATED)"
-       depends on ARCH_AT91
-       help
-         This selects the AT91 MCI controller. This driver will
-         be removed soon (for more information have a look to
-         Documentation/feature-removal-schedule.txt). Please use
-         MMC_ATMEL_MCI.
-
-         If unsure, say N.
-
 config MMC_ATMELMCI
-       tristate "Atmel Multimedia Card Interface support"
+       tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
        depends on AVR32 || ARCH_AT91
        help
          This selects the Atmel Multimedia Card Interface driver. If
@@ -298,8 +280,6 @@ config MMC_ATMELMCI
 
          If unsure, say N.
 
-endchoice
-
 config MMC_ATMELMCI_DMA
        bool "Atmel MCI DMA support"
        depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
index 17ad0a7..cd64b5d 100644 (file)
@@ -17,7 +17,6 @@ obj-$(CONFIG_MMC_WBSD)                += wbsd.o
 obj-$(CONFIG_MMC_AU1X)         += au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)         += omap.o
 obj-$(CONFIG_MMC_OMAP_HS)      += omap_hsmmc.o
-obj-$(CONFIG_MMC_AT91)         += at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)     += atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)      += tifm_sd.o
 obj-$(CONFIG_MMC_MSM)          += msm_sdcc.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
deleted file mode 100644 (file)
index 74bed0f..0000000
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- *  linux/drivers/mmc/host/at91_mci.c - ATMEL AT91 MCI Driver
- *
- *  Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
- *
- *  Copyright (C) 2006 Malcolm Noyes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
-   This is the AT91 MCI driver that has been tested with both MMC cards
-   and SD-cards.  Boards that support write protect are now supported.
-   The CCAT91SBC001 board does not support SD cards.
-
-   The three entry points are at91_mci_request, at91_mci_set_ios
-   and at91_mci_get_ro.
-
-   SET IOS
-     This configures the device to put it into the correct mode and clock speed
-     required.
-
-   MCI REQUEST
-     MCI request processes the commands sent in the mmc_request structure. This
-     can consist of a processing command and a stop command in the case of
-     multiple block transfers.
-
-     There are three main types of request, commands, reads and writes.
-
-     Commands are straight forward. The command is submitted to the controller and
-     the request function returns. When the controller generates an interrupt to indicate
-     the command is finished, the response to the command are read and the mmc_request_done
-     function called to end the request.
-
-     Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
-     controller to manage the transfers.
-
-     A read is done from the controller directly to the scatterlist passed in from the request.
-     Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
-     swapped in the scatterlist buffers.  AT91SAM926x are not affected by this bug.
-
-     The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
-
-     A write is slightly different in that the bytes to write are read from the scatterlist
-     into a dma memory buffer (this is in case the source buffer should be read only). The
-     entire write buffer is then done from this single dma memory buffer.
-
-     The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
-
-   GET RO
-     Gets the status of the write protect pin, if available.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/gpio.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "at91_mci.h"
-
-#define DRIVER_NAME "at91_mci"
-
-static inline int at91mci_is_mci1rev2xx(void)
-{
-       return (   cpu_is_at91sam9260()
-               || cpu_is_at91sam9263()
-               || cpu_is_at91sam9rl()
-               || cpu_is_at91sam9g10()
-               || cpu_is_at91sam9g20()
-               );
-}
-
-#define FL_SENT_COMMAND        (1 << 0)
-#define FL_SENT_STOP   (1 << 1)
-
-#define AT91_MCI_ERRORS        (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE       \
-               | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE               \
-               | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
-#define at91_mci_read(host, reg)       __raw_readl((host)->baseaddr + (reg))
-#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-
-#define MCI_BLKSIZE            512
-#define MCI_MAXBLKSIZE                 4095
-#define MCI_BLKATONCE          256
-#define MCI_BUFSIZE            (MCI_BLKSIZE * MCI_BLKATONCE)
-
-/*
- * Low level type for this driver
- */
-struct at91mci_host
-{
-       struct mmc_host *mmc;
-       struct mmc_command *cmd;
-       struct mmc_request *request;
-
-       void __iomem *baseaddr;
-       int irq;
-
-       struct at91_mmc_data *board;
-       int present;
-
-       struct clk *mci_clk;
-
-       /*
-        * Flag indicating when the command has been sent. This is used to
-        * work out whether or not to send the stop
-        */
-       unsigned int flags;
-       /* flag for current bus settings */
-       u32 bus_mode;
-
-       /* DMA buffer used for transmitting */
-       unsigned int* buffer;
-       dma_addr_t physical_address;
-       unsigned int total_length;
-
-       /* Latest in the scatterlist that has been enabled for transfer, but not freed */
-       int in_use_index;
-
-       /* Latest in the scatterlist that has been enabled for transfer */
-       int transfer_index;
-
-       /* Timer for timeouts */
-       struct timer_list timer;
-};
-
-/*
- * Reset the controller and restore most of the state
- */
-static void at91_reset_host(struct at91mci_host *host)
-{
-       unsigned long flags;
-       u32 mr;
-       u32 sdcr;
-       u32 dtor;
-       u32 imr;
-
-       local_irq_save(flags);
-       imr = at91_mci_read(host, AT91_MCI_IMR);
-
-       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-
-       /* save current state */
-       mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
-       sdcr = at91_mci_read(host, AT91_MCI_SDCR);
-       dtor = at91_mci_read(host, AT91_MCI_DTOR);
-
-       /* reset the controller */
-       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-
-       /* restore state */
-       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-       at91_mci_write(host, AT91_MCI_MR, mr);
-       at91_mci_write(host, AT91_MCI_SDCR, sdcr);
-       at91_mci_write(host, AT91_MCI_DTOR, dtor);
-       at91_mci_write(host, AT91_MCI_IER, imr);
-
-       /* make sure sdio interrupts will fire */
-       at91_mci_read(host, AT91_MCI_SR);
-
-       local_irq_restore(flags);
-}
-
-static void at91_timeout_timer(unsigned long data)
-{
-       struct at91mci_host *host;
-
-       host = (struct at91mci_host *)data;
-
-       if (host->request) {
-               dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
-
-               if (host->cmd && host->cmd->data) {
-                       host->cmd->data->error = -ETIMEDOUT;
-               } else {
-                       if (host->cmd)
-                               host->cmd->error = -ETIMEDOUT;
-                       else
-                               host->request->cmd->error = -ETIMEDOUT;
-               }
-
-               at91_reset_host(host);
-               mmc_request_done(host->mmc, host->request);
-       }
-}
-
-/*
- * Copy from sg to a dma block - used for transfers
- */
-static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
-{
-       unsigned int len, i, size;
-       unsigned *dmabuf = host->buffer;
-
-       size = data->blksz * data->blocks;
-       len = data->sg_len;
-
-       /* MCI1 rev2xx Data Write Operation and number of bytes erratum */
-       if (at91mci_is_mci1rev2xx())
-               if (host->total_length == 12)
-                       memset(dmabuf, 0, 12);
-
-       /*
-        * Just loop through all entries. Size might not
-        * be the entire list though so make sure that
-        * we do not transfer too much.
-        */
-       for (i = 0; i < len; i++) {
-               struct scatterlist *sg;
-               int amount;
-               unsigned int *sgbuffer;
-
-               sg = &data->sg[i];
-
-               sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
-               amount = min(size, sg->length);
-               size -= amount;
-
-               if (cpu_is_at91rm9200()) {      /* AT91RM9200 errata */
-                       int index;
-
-                       for (index = 0; index < (amount / 4); index++)
-                               *dmabuf++ = swab32(sgbuffer[index]);
-               } else {
-                       char *tmpv = (char *)dmabuf;
-                       memcpy(tmpv, sgbuffer, amount);
-                       tmpv += amount;
-                       dmabuf = (unsigned *)tmpv;
-               }
-
-               kunmap_atomic(sgbuffer);
-
-               if (size == 0)
-                       break;
-       }
-
-       /*
-        * Check that we didn't get a request to transfer
-        * more data than can fit into the SG list.
-        */
-       BUG_ON(size != 0);
-}
-
-/*
- * Handle after a dma read
- */
-static void at91_mci_post_dma_read(struct at91mci_host *host)
-{
-       struct mmc_command *cmd;
-       struct mmc_data *data;
-       unsigned int len, i, size;
-       unsigned *dmabuf = host->buffer;
-
-       pr_debug("post dma read\n");
-
-       cmd = host->cmd;
-       if (!cmd) {
-               pr_debug("no command\n");
-               return;
-       }
-
-       data = cmd->data;
-       if (!data) {
-               pr_debug("no data\n");
-               return;
-       }
-
-       size = data->blksz * data->blocks;
-       len = data->sg_len;
-
-       at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
-       at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-
-       for (i = 0; i < len; i++) {
-               struct scatterlist *sg;
-               int amount;
-               unsigned int *sgbuffer;
-
-               sg = &data->sg[i];
-
-               sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
-               amount = min(size, sg->length);
-               size -= amount;
-
-               if (cpu_is_at91rm9200()) {      /* AT91RM9200 errata */
-                       int index;
-                       for (index = 0; index < (amount / 4); index++)
-                               sgbuffer[index] = swab32(*dmabuf++);
-               } else {
-                       char *tmpv = (char *)dmabuf;
-                       memcpy(sgbuffer, tmpv, amount);
-                       tmpv += amount;
-                       dmabuf = (unsigned *)tmpv;
-               }
-
-               flush_kernel_dcache_page(sg_page(sg));
-               kunmap_atomic(sgbuffer);
-               data->bytes_xfered += amount;
-               if (size == 0)
-                       break;
-       }
-
-       pr_debug("post dma read done\n");
-}
-
-/*
- * Handle transmitted data
- */
-static void at91_mci_handle_transmitted(struct at91mci_host *host)
-{
-       struct mmc_command *cmd;
-       struct mmc_data *data;
-
-       pr_debug("Handling the transmit\n");
-
-       /* Disable the transfer */
-       at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-       /* Now wait for cmd ready */
-       at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-
-       cmd = host->cmd;
-       if (!cmd) return;
-
-       data = cmd->data;
-       if (!data) return;
-
-       if (cmd->data->blocks > 1) {
-               pr_debug("multiple write : wait for BLKE...\n");
-               at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
-       } else
-               at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-}
-
-/*
- * Update bytes transfered count during a write operation
- */
-static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
-{
-       struct mmc_data *data;
-
-       /* always deal with the effective request (and not the current cmd) */
-
-       if (host->request->cmd && host->request->cmd->error != 0)
-               return;
-
-       if (host->request->data) {
-               data = host->request->data;
-               if (data->flags & MMC_DATA_WRITE) {
-                       /* card is in IDLE mode now */
-                       pr_debug("-> bytes_xfered %d, total_length = %d\n",
-                               data->bytes_xfered, host->total_length);
-                       data->bytes_xfered = data->blksz * data->blocks;
-               }
-       }
-}
-
-
-/*Handle after command sent ready*/
-static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
-{
-       if (!host->cmd)
-               return 1;
-       else if (!host->cmd->data) {
-               if (host->flags & FL_SENT_STOP) {
-                       /*After multi block write, we must wait for NOTBUSY*/
-                       at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-               } else return 1;
-       } else if (host->cmd->data->flags & MMC_DATA_WRITE) {
-               /*After sendding multi-block-write command, start DMA transfer*/
-               at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE);
-               at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
-       }
-
-       /* command not completed, have to wait */
-       return 0;
-}
-
-
-/*
- * Enable the controller
- */
-static void at91_mci_enable(struct at91mci_host *host)
-{
-       unsigned int mr;
-
-       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-       at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-       mr = AT91_MCI_PDCMODE | 0x34a;
-
-       if (at91mci_is_mci1rev2xx())
-               mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
-
-       at91_mci_write(host, AT91_MCI_MR, mr);
-
-       /* use Slot A or B (only one at same time) */
-       at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-}
-
-/*
- * Disable the controller
- */
-static void at91_mci_disable(struct at91mci_host *host)
-{
-       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-}
-
-/*
- * Send a command
- */
-static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
-       unsigned int cmdr, mr;
-       unsigned int block_length;
-       struct mmc_data *data = cmd->data;
-
-       unsigned int blocks;
-       unsigned int ier = 0;
-
-       host->cmd = cmd;
-
-       /* Needed for leaving busy state before CMD1 */
-       if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
-               pr_debug("Clearing timeout\n");
-               at91_mci_write(host, AT91_MCI_ARGR, 0);
-               at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
-               while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
-                       /* spin */
-                       pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
-               }
-       }
-
-       cmdr = cmd->opcode;
-
-       if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-               cmdr |= AT91_MCI_RSPTYP_NONE;
-       else {
-               /* if a response is expected then allow maximum response latancy */
-               cmdr |= AT91_MCI_MAXLAT;
-               /* set 136 bit response for R2, 48 bit response otherwise */
-               if (mmc_resp_type(cmd) == MMC_RSP_R2)
-                       cmdr |= AT91_MCI_RSPTYP_136;
-               else
-                       cmdr |= AT91_MCI_RSPTYP_48;
-       }
-
-       if (data) {
-
-               if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) {
-                       if (data->blksz & 0x3) {
-                               pr_debug("Unsupported block size\n");
-                               cmd->error = -EINVAL;
-                               mmc_request_done(host->mmc, host->request);
-                               return;
-                       }
-                       if (data->flags & MMC_DATA_STREAM) {
-                               pr_debug("Stream commands not supported\n");
-                               cmd->error = -EINVAL;
-                               mmc_request_done(host->mmc, host->request);
-                               return;
-                       }
-               }
-
-               block_length = data->blksz;
-               blocks = data->blocks;
-
-               /* always set data start - also set direction flag for read */
-               if (data->flags & MMC_DATA_READ)
-                       cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
-               else if (data->flags & MMC_DATA_WRITE)
-                       cmdr |= AT91_MCI_TRCMD_START;
-
-               if (cmd->opcode == SD_IO_RW_EXTENDED) {
-                       cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
-               } else {
-                       if (data->flags & MMC_DATA_STREAM)
-                               cmdr |= AT91_MCI_TRTYP_STREAM;
-                       if (data->blocks > 1)
-                               cmdr |= AT91_MCI_TRTYP_MULTIPLE;
-               }
-       }
-       else {
-               block_length = 0;
-               blocks = 0;
-       }
-
-       if (host->flags & FL_SENT_STOP)
-               cmdr |= AT91_MCI_TRCMD_STOP;
-
-       if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
-               cmdr |= AT91_MCI_OPDCMD;
-
-       /*
-        * Set the arguments and send the command
-        */
-       pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
-               cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
-
-       if (!data) {
-               at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
-               at91_mci_write(host, ATMEL_PDC_RPR, 0);
-               at91_mci_write(host, ATMEL_PDC_RCR, 0);
-               at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-               at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-               at91_mci_write(host, ATMEL_PDC_TPR, 0);
-               at91_mci_write(host, ATMEL_PDC_TCR, 0);
-               at91_mci_write(host, ATMEL_PDC_TNPR, 0);
-               at91_mci_write(host, ATMEL_PDC_TNCR, 0);
-               ier = AT91_MCI_CMDRDY;
-       } else {
-               /* zero block length and PDC mode */
-               mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff;
-               mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
-               mr |= (block_length << 16);
-               mr |= AT91_MCI_PDCMODE;
-               at91_mci_write(host, AT91_MCI_MR, mr);
-
-               if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261()))
-                       at91_mci_write(host, AT91_MCI_BLKR,
-                               AT91_MCI_BLKR_BCNT(blocks) |
-                               AT91_MCI_BLKR_BLKLEN(block_length));
-
-               /*
-                * Disable the PDC controller
-                */
-               at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-               if (cmdr & AT91_MCI_TRCMD_START) {
-                       data->bytes_xfered = 0;
-                       host->transfer_index = 0;
-                       host->in_use_index = 0;
-                       if (cmdr & AT91_MCI_TRDIR) {
-                               /*
-                                * Handle a read
-                                */
-                               host->total_length = 0;
-
-                               at91_mci_write(host, ATMEL_PDC_RPR, host->physical_address);
-                               at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ?
-                                       (blocks * block_length) : (blocks * block_length) / 4);
-                               at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-                               at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-
-                               ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
-                       }
-                       else {
-                               /*
-                                * Handle a write
-                                */
-                               host->total_length = block_length * blocks;
-                               /*
-                                * MCI1 rev2xx Data Write Operation and
-                                * number of bytes erratum
-                                */
-                               if (at91mci_is_mci1rev2xx())
-                                       if (host->total_length < 12)
-                                               host->total_length = 12;
-
-                               at91_mci_sg_to_dma(host, data);
-
-                               pr_debug("Transmitting %d bytes\n", host->total_length);
-
-                               at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-                               at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
-                                               host->total_length : host->total_length / 4);
-
-                               ier = AT91_MCI_CMDRDY;
-                       }
-               }
-       }
-
-       /*
-        * Send the command and then enable the PDC - not the other way round as
-        * the data sheet says
-        */
-
-       at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
-       at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-
-       if (cmdr & AT91_MCI_TRCMD_START) {
-               if (cmdr & AT91_MCI_TRDIR)
-                       at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
-       }
-
-       /* Enable selected interrupts */
-       at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
-}
-
-/*
- * Process the next step in the request
- */
-static void at91_mci_process_next(struct at91mci_host *host)
-{
-       if (!(host->flags & FL_SENT_COMMAND)) {
-               host->flags |= FL_SENT_COMMAND;
-               at91_mci_send_command(host, host->request->cmd);
-       }
-       else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
-               host->flags |= FL_SENT_STOP;
-               at91_mci_send_command(host, host->request->stop);
-       } else {
-               del_timer(&host->timer);
-               /* the at91rm9200 mci controller hangs after some transfers,
-                * and the workaround is to reset it after each transfer.
-                */
-               if (cpu_is_at91rm9200())
-                       at91_reset_host(host);
-               mmc_request_done(host->mmc, host->request);
-       }
-}
-
-/*
- * Handle a command that has been completed
- */
-static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status)
-{
-       struct mmc_command *cmd = host->cmd;
-       struct mmc_data *data = cmd->data;
-
-       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
-       cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
-       cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
-       cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
-       cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
-
-       pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
-                status, at91_mci_read(host, AT91_MCI_SR),
-                cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-       if (status & AT91_MCI_ERRORS) {
-               if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
-                       cmd->error = 0;
-               }
-               else {
-                       if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) {
-                               if (data) {
-                                       if (status & AT91_MCI_DTOE)
-                                               data->error = -ETIMEDOUT;
-                                       else if (status & AT91_MCI_DCRCE)
-                                               data->error = -EILSEQ;
-                               }
-                       } else {
-                               if (status & AT91_MCI_RTOE)
-                                       cmd->error = -ETIMEDOUT;
-                               else if (status & AT91_MCI_RCRCE)
-                                       cmd->error = -EILSEQ;
-                               else
-                                       cmd->error = -EIO;
-                       }
-
-                       pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n",
-                               cmd->error, data ? data->error : 0,
-                                cmd->opcode, cmd->retries);
-               }
-       }
-       else
-               cmd->error = 0;
-
-       at91_mci_process_next(host);
-}
-
-/*
- * Handle an MMC request
- */
-static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-       struct at91mci_host *host = mmc_priv(mmc);
-       host->request = mrq;
-       host->flags = 0;
-
-       /* more than 1s timeout needed with slow SD cards */
-       mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
-
-       at91_mci_process_next(host);
-}
-
-/*
- * Set the IOS
- */
-static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-       int clkdiv;
-       struct at91mci_host *host = mmc_priv(mmc);
-       unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
-
-       host->bus_mode = ios->bus_mode;
-
-       if (ios->clock == 0) {
-               /* Disable the MCI controller */
-               at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
-               clkdiv = 0;
-       }
-       else {
-               /* Enable the MCI controller */
-               at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-
-               if ((at91_master_clock % (ios->clock * 2)) == 0)
-                       clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
-               else
-                       clkdiv = (at91_master_clock / ios->clock) / 2;
-
-               pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
-                       at91_master_clock / (2 * (clkdiv + 1)));
-       }
-       if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
-               pr_debug("MMC: Setting controller bus width to 4\n");
-               at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
-       }
-       else {
-               pr_debug("MMC: Setting controller bus width to 1\n");
-               at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-       }
-
-       /* Set the clock divider */
-       at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
-
-       /* maybe switch power to the card */
-       if (gpio_is_valid(host->board->vcc_pin)) {
-               switch (ios->power_mode) {
-                       case MMC_POWER_OFF:
-                               gpio_set_value(host->board->vcc_pin, 0);
-                               break;
-                       case MMC_POWER_UP:
-                               gpio_set_value(host->board->vcc_pin, 1);
-                               break;
-                       case MMC_POWER_ON:
-                               break;
-                       default:
-                               WARN_ON(1);
-               }
-       }
-}
-
-/*
- * Handle an interrupt
- */
-static irqreturn_t at91_mci_irq(int irq, void *devid)
-{
-       struct at91mci_host *host = devid;
-       int completed = 0;
-       unsigned int int_status, int_mask;
-
-       int_status = at91_mci_read(host, AT91_MCI_SR);
-       int_mask = at91_mci_read(host, AT91_MCI_IMR);
-
-       pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
-               int_status & int_mask);
-
-       int_status = int_status & int_mask;
-
-       if (int_status & AT91_MCI_ERRORS) {
-               completed = 1;
-
-               if (int_status & AT91_MCI_UNRE)
-                       pr_debug("MMC: Underrun error\n");
-               if (int_status & AT91_MCI_OVRE)
-                       pr_debug("MMC: Overrun error\n");
-               if (int_status & AT91_MCI_DTOE)
-                       pr_debug("MMC: Data timeout\n");
-               if (int_status & AT91_MCI_DCRCE)
-                       pr_debug("MMC: CRC error in data\n");
-               if (int_status & AT91_MCI_RTOE)
-                       pr_debug("MMC: Response timeout\n");
-               if (int_status & AT91_MCI_RENDE)
-                       pr_debug("MMC: Response end bit error\n");
-               if (int_status & AT91_MCI_RCRCE)
-                       pr_debug("MMC: Response CRC error\n");
-               if (int_status & AT91_MCI_RDIRE)
-                       pr_debug("MMC: Response direction error\n");
-               if (int_status & AT91_MCI_RINDE)
-                       pr_debug("MMC: Response index error\n");
-       } else {
-               /* Only continue processing if no errors */
-
-               if (int_status & AT91_MCI_TXBUFE) {
-                       pr_debug("TX buffer empty\n");
-                       at91_mci_handle_transmitted(host);
-               }
-
-               if (int_status & AT91_MCI_ENDRX) {
-                       pr_debug("ENDRX\n");
-                       at91_mci_post_dma_read(host);
-               }
-
-               if (int_status & AT91_MCI_RXBUFF) {
-                       pr_debug("RX buffer full\n");
-                       at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-                       at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX);
-                       completed = 1;
-               }
-
-               if (int_status & AT91_MCI_ENDTX)
-                       pr_debug("Transmit has ended\n");
-
-               if (int_status & AT91_MCI_NOTBUSY) {
-                       pr_debug("Card is ready\n");
-                       at91_mci_update_bytes_xfered(host);
-                       completed = 1;
-               }
-
-               if (int_status & AT91_MCI_DTIP)
-                       pr_debug("Data transfer in progress\n");
-
-               if (int_status & AT91_MCI_BLKE) {
-                       pr_debug("Block transfer has ended\n");
-                       if (host->request->data && host->request->data->blocks > 1) {
-                               /* multi block write : complete multi write
-                                * command and send stop */
-                               completed = 1;
-                       } else {
-                               at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-                       }
-               }
-
-               if (int_status & AT91_MCI_SDIOIRQA)
-                       mmc_signal_sdio_irq(host->mmc);
-
-               if (int_status & AT91_MCI_SDIOIRQB)
-                       mmc_signal_sdio_irq(host->mmc);
-
-               if (int_status & AT91_MCI_TXRDY)
-                       pr_debug("Ready to transmit\n");
-
-               if (int_status & AT91_MCI_RXRDY)
-                       pr_debug("Ready to receive\n");
-
-               if (int_status & AT91_MCI_CMDRDY) {
-                       pr_debug("Command ready\n");
-                       completed = at91_mci_handle_cmdrdy(host);
-               }
-       }
-
-       if (completed) {
-               pr_debug("Completed command\n");
-               at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-               at91_mci_completed_command(host, int_status);
-       } else
-               at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
-       return IRQ_HANDLED;
-}
-
-static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
-{
-       struct at91mci_host *host = _host;
-       int present;
-
-       /* entering this ISR means that we have configured det_pin:
-        * we can use its value in board structure */
-       present = !gpio_get_value(host->board->det_pin);
-
-       /*
-        * we expect this irq on both insert and remove,
-        * and use a short delay to debounce.
-        */
-       if (present != host->present) {
-               host->present = present;
-               pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-                       present ? "insert" : "remove");
-               if (!present) {
-                       pr_debug("****** Resetting SD-card bus width ******\n");
-                       at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-               }
-               /* 0.5s needed because of early card detect switch firing */
-               mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-       }
-       return IRQ_HANDLED;
-}
-
-static int at91_mci_get_ro(struct mmc_host *mmc)
-{
-       struct at91mci_host *host = mmc_priv(mmc);
-
-       if (gpio_is_valid(host->board->wp_pin))
-               return !!gpio_get_value(host->board->wp_pin);
-       /*
-        * Board doesn't support read only detection; let the mmc core
-        * decide what to do.
-        */
-       return -ENOSYS;
-}
-
-static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
-       struct at91mci_host *host = mmc_priv(mmc);
-
-       pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
-               host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
-       at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
-               host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
-
-}
-
-static const struct mmc_host_ops at91_mci_ops = {
-       .request        = at91_mci_request,
-       .set_ios        = at91_mci_set_ios,
-       .get_ro         = at91_mci_get_ro,
-       .enable_sdio_irq = at91_mci_enable_sdio_irq,
-};
-
-/*
- * Probe for the device
- */
-static int __init at91_mci_probe(struct platform_device *pdev)
-{
-       struct mmc_host *mmc;
-       struct at91mci_host *host;
-       struct resource *res;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res)
-               return -ENXIO;
-
-       if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME))
-               return -EBUSY;
-
-       mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
-       if (!mmc) {
-               ret = -ENOMEM;
-               dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
-               goto fail6;
-       }
-
-       mmc->ops = &at91_mci_ops;
-       mmc->f_min = 375000;
-       mmc->f_max = 25000000;
-       mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-       mmc->caps = 0;
-
-       mmc->max_blk_size  = MCI_MAXBLKSIZE;
-       mmc->max_blk_count = MCI_BLKATONCE;
-       mmc->max_req_size  = MCI_BUFSIZE;
-       mmc->max_segs      = MCI_BLKATONCE;
-       mmc->max_seg_size  = MCI_BUFSIZE;
-
-       host = mmc_priv(mmc);
-       host->mmc = mmc;
-       host->bus_mode = 0;
-       host->board = pdev->dev.platform_data;
-       if (host->board->wire4) {
-               if (at91mci_is_mci1rev2xx())
-                       mmc->caps |= MMC_CAP_4_BIT_DATA;
-               else
-                       dev_warn(&pdev->dev, "4 wire bus mode not supported"
-                               " - using 1 wire\n");
-       }
-
-       host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
-                                       &host->physical_address, GFP_KERNEL);
-       if (!host->buffer) {
-               ret = -ENOMEM;
-               dev_err(&pdev->dev, "Can't allocate transmit buffer\n");
-               goto fail5;
-       }
-
-       /* Add SDIO capability when available */
-       if (at91mci_is_mci1rev2xx()) {
-               /* at91mci MCI1 rev2xx sdio interrupt erratum */
-               if (host->board->wire4 || !host->board->slot_b)
-                       mmc->caps |= MMC_CAP_SDIO_IRQ;
-       }
-
-       /*
-        * Reserve GPIOs ... board init code makes sure these pins are set
-        * up as GPIOs with the right direction (input, except for vcc)
-        */
-       if (gpio_is_valid(host->board->det_pin)) {
-               ret = gpio_request(host->board->det_pin, "mmc_detect");
-               if (ret < 0) {
-                       dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
-                       goto fail4b;
-               }
-       }
-       if (gpio_is_valid(host->board->wp_pin)) {
-               ret = gpio_request(host->board->wp_pin, "mmc_wp");
-               if (ret < 0) {
-                       dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
-                       goto fail4;
-               }
-       }
-       if (gpio_is_valid(host->board->vcc_pin)) {
-               ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
-               if (ret < 0) {
-                       dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
-                       goto fail3;
-               }
-       }
-
-       /*
-        * Get Clock
-        */
-       host->mci_clk = clk_get(&pdev->dev, "mci_clk");
-       if (IS_ERR(host->mci_clk)) {
-               ret = -ENODEV;
-               dev_dbg(&pdev->dev, "no mci_clk?\n");
-               goto fail2;
-       }
-
-       /*
-        * Map I/O region
-        */
-       host->baseaddr = ioremap(res->start, resource_size(res));
-       if (!host->baseaddr) {
-               ret = -ENOMEM;
-               goto fail1;
-       }
-
-       /*
-        * Reset hardware
-        */
-       clk_enable(host->mci_clk);              /* Enable the peripheral clock */
-       at91_mci_disable(host);
-       at91_mci_enable(host);
-
-       /*
-        * Allocate the MCI interrupt
-        */
-       host->irq = platform_get_irq(pdev, 0);
-       ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
-                       mmc_hostname(mmc), host);
-       if (ret) {
-               dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
-               goto fail0;
-       }
-
-       setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
-
-       platform_set_drvdata(pdev, mmc);
-
-       /*
-        * Add host to MMC layer
-        */
-       if (gpio_is_valid(host->board->det_pin)) {
-               host->present = !gpio_get_value(host->board->det_pin);
-       }
-       else
-               host->present = -1;
-
-       mmc_add_host(mmc);
-
-       /*
-        * monitor card insertion/removal if we can
-        */
-       if (gpio_is_valid(host->board->det_pin)) {
-               ret = request_irq(gpio_to_irq(host->board->det_pin),
-                               at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
-               if (ret)
-                       dev_warn(&pdev->dev, "request MMC detect irq failed\n");
-               else
-                       device_init_wakeup(&pdev->dev, 1);
-       }
-
-       pr_debug("Added MCI driver\n");
-
-       return 0;
-
-fail0:
-       clk_disable(host->mci_clk);
-       iounmap(host->baseaddr);
-fail1:
-       clk_put(host->mci_clk);
-fail2:
-       if (gpio_is_valid(host->board->vcc_pin))
-               gpio_free(host->board->vcc_pin);
-fail3:
-       if (gpio_is_valid(host->board->wp_pin))
-               gpio_free(host->board->wp_pin);
-fail4:
-       if (gpio_is_valid(host->board->det_pin))
-               gpio_free(host->board->det_pin);
-fail4b:
-       if (host->buffer)
-               dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
-                               host->buffer, host->physical_address);
-fail5:
-       mmc_free_host(mmc);
-fail6:
-       release_mem_region(res->start, resource_size(res));
-       dev_err(&pdev->dev, "probe failed, err %d\n", ret);
-       return ret;
-}
-
-/*
- * Remove a device
- */
-static int __exit at91_mci_remove(struct platform_device *pdev)
-{
-       struct mmc_host *mmc = platform_get_drvdata(pdev);
-       struct at91mci_host *host;
-       struct resource *res;
-
-       if (!mmc)
-               return -1;
-
-       host = mmc_priv(mmc);
-
-       if (host->buffer)
-               dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
-                               host->buffer, host->physical_address);
-
-       if (gpio_is_valid(host->board->det_pin)) {
-               if (device_can_wakeup(&pdev->dev))
-                       free_irq(gpio_to_irq(host->board->det_pin), host);
-               device_init_wakeup(&pdev->dev, 0);
-               gpio_free(host->board->det_pin);
-       }
-
-       at91_mci_disable(host);
-       del_timer_sync(&host->timer);
-       mmc_remove_host(mmc);
-       free_irq(host->irq, host);
-
-       clk_disable(host->mci_clk);                     /* Disable the peripheral clock */
-       clk_put(host->mci_clk);
-
-       if (gpio_is_valid(host->board->vcc_pin))
-               gpio_free(host->board->vcc_pin);
-       if (gpio_is_valid(host->board->wp_pin))
-               gpio_free(host->board->wp_pin);
-
-       iounmap(host->baseaddr);
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       release_mem_region(res->start, resource_size(res));
-
-       mmc_free_host(mmc);
-       platform_set_drvdata(pdev, NULL);
-       pr_debug("MCI Removed\n");
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-       struct mmc_host *mmc = platform_get_drvdata(pdev);
-       struct at91mci_host *host = mmc_priv(mmc);
-       int ret = 0;
-
-       if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
-               enable_irq_wake(host->board->det_pin);
-
-       if (mmc)
-               ret = mmc_suspend_host(mmc);
-
-       return ret;
-}
-
-static int at91_mci_resume(struct platform_device *pdev)
-{
-       struct mmc_host *mmc = platform_get_drvdata(pdev);
-       struct at91mci_host *host = mmc_priv(mmc);
-       int ret = 0;
-
-       if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
-               disable_irq_wake(host->board->det_pin);
-
-       if (mmc)
-               ret = mmc_resume_host(mmc);
-
-       return ret;
-}
-#else
-#define at91_mci_suspend       NULL
-#define at91_mci_resume                NULL
-#endif
-
-static struct platform_driver at91_mci_driver = {
-       .remove         = __exit_p(at91_mci_remove),
-       .suspend        = at91_mci_suspend,
-       .resume         = at91_mci_resume,
-       .driver         = {
-               .name   = DRIVER_NAME,
-               .owner  = THIS_MODULE,
-       },
-};
-
-static int __init at91_mci_init(void)
-{
-       return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
-}
-
-static void __exit at91_mci_exit(void)
-{
-       platform_driver_unregister(&at91_mci_driver);
-}
-
-module_init(at91_mci_init);
-module_exit(at91_mci_exit);
-
-MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
-MODULE_AUTHOR("Nick Randell");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_mci");
diff --git a/drivers/mmc/host/at91_mci.h b/drivers/mmc/host/at91_mci.h
deleted file mode 100644 (file)
index eec3a6b..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * drivers/mmc/host/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR            0x00            /* Control Register */
-#define                AT91_MCI_MCIEN          (1 <<  0)       /* Multi-Media Interface Enable */
-#define                AT91_MCI_MCIDIS         (1 <<  1)       /* Multi-Media Interface Disable */
-#define                AT91_MCI_PWSEN          (1 <<  2)       /* Power Save Mode Enable */
-#define                AT91_MCI_PWSDIS         (1 <<  3)       /* Power Save Mode Disable */
-#define                AT91_MCI_SWRST          (1 <<  7)       /* Software Reset */
-
-#define AT91_MCI_MR            0x04            /* Mode Register */
-#define                AT91_MCI_CLKDIV         (0xff  <<  0)   /* Clock Divider */
-#define                AT91_MCI_PWSDIV         (7     <<  8)   /* Power Saving Divider */
-#define                AT91_MCI_RDPROOF        (1     << 11)   /* Read Proof Enable [SAM926[03] only] */
-#define                AT91_MCI_WRPROOF        (1     << 12)   /* Write Proof Enable [SAM926[03] only] */
-#define                AT91_MCI_PDCFBYTE       (1     << 13)   /* PDC Force Byte Transfer [SAM926[03] only] */
-#define                AT91_MCI_PDCPADV        (1     << 14)   /* PDC Padding Value */
-#define                AT91_MCI_PDCMODE        (1     << 15)   /* PDC-orientated Mode */
-#define                AT91_MCI_BLKLEN         (0xfff << 18)   /* Data Block Length */
-
-#define AT91_MCI_DTOR          0x08            /* Data Timeout Register */
-#define                AT91_MCI_DTOCYC         (0xf << 0)      /* Data Timeout Cycle Number */
-#define                AT91_MCI_DTOMUL         (7   << 4)      /* Data Timeout Multiplier */
-#define                AT91_MCI_DTOMUL_1               (0 <<  4)
-#define                AT91_MCI_DTOMUL_16              (1 <<  4)
-#define                AT91_MCI_DTOMUL_128             (2 <<  4)
-#define                AT91_MCI_DTOMUL_256             (3 <<  4)
-#define                AT91_MCI_DTOMUL_1K              (4 <<  4)
-#define                AT91_MCI_DTOMUL_4K              (5 <<  4)
-#define                AT91_MCI_DTOMUL_64K             (6 <<  4)
-#define                AT91_MCI_DTOMUL_1M              (7 <<  4)
-
-#define AT91_MCI_SDCR          0x0c            /* SD Card Register */
-#define                AT91_MCI_SDCSEL         (3 << 0)        /* SD Card Selector */
-#define                AT91_MCI_SDCBUS         (1 << 7)        /* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR          0x10            /* Argument Register */
-
-#define AT91_MCI_CMDR          0x14            /* Command Register */
-#define                AT91_MCI_CMDNB          (0x3f << 0)     /* Command Number */
-#define                AT91_MCI_RSPTYP         (3    << 6)     /* Response Type */
-#define                        AT91_MCI_RSPTYP_NONE    (0 <<  6)
-#define                        AT91_MCI_RSPTYP_48      (1 <<  6)
-#define                        AT91_MCI_RSPTYP_136     (2 <<  6)
-#define                AT91_MCI_SPCMD          (7    << 8)     /* Special Command */
-#define                        AT91_MCI_SPCMD_NONE     (0 <<  8)
-#define                        AT91_MCI_SPCMD_INIT     (1 <<  8)
-#define                        AT91_MCI_SPCMD_SYNC     (2 <<  8)
-#define                        AT91_MCI_SPCMD_ICMD     (4 <<  8)
-#define                        AT91_MCI_SPCMD_IRESP    (5 <<  8)
-#define                AT91_MCI_OPDCMD         (1 << 11)       /* Open Drain Command */
-#define                AT91_MCI_MAXLAT         (1 << 12)       /* Max Latency for Command to Response */
-#define                AT91_MCI_TRCMD          (3 << 16)       /* Transfer Command */
-#define                        AT91_MCI_TRCMD_NONE     (0 << 16)
-#define                        AT91_MCI_TRCMD_START    (1 << 16)
-#define                        AT91_MCI_TRCMD_STOP     (2 << 16)
-#define                AT91_MCI_TRDIR          (1 << 18)       /* Transfer Direction */
-#define                AT91_MCI_TRTYP          (3 << 19)       /* Transfer Type */
-#define                        AT91_MCI_TRTYP_BLOCK    (0 << 19)
-#define                        AT91_MCI_TRTYP_MULTIPLE (1 << 19)
-#define                        AT91_MCI_TRTYP_STREAM   (2 << 19)
-#define                        AT91_MCI_TRTYP_SDIO_BYTE        (4 << 19)
-#define                        AT91_MCI_TRTYP_SDIO_BLOCK       (5 << 19)
-
-#define AT91_MCI_BLKR          0x18            /* Block Register */
-#define                AT91_MCI_BLKR_BCNT(n)   ((0xffff & (n)) << 0)   /* Block count */
-#define                AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16)  /* Block length */
-
-#define AT91_MCI_RSPR(n)       (0x20 + ((n) * 4))      /* Response Registers 0-3 */
-#define AT91_MCR_RDR           0x30            /* Receive Data Register */
-#define AT91_MCR_TDR           0x34            /* Transmit Data Register */
-
-#define AT91_MCI_SR            0x40            /* Status Register */
-#define                AT91_MCI_CMDRDY         (1 <<  0)       /* Command Ready */
-#define                AT91_MCI_RXRDY          (1 <<  1)       /* Receiver Ready */
-#define                AT91_MCI_TXRDY          (1 <<  2)       /* Transmit Ready */
-#define                AT91_MCI_BLKE           (1 <<  3)       /* Data Block Ended */
-#define                AT91_MCI_DTIP           (1 <<  4)       /* Data Transfer in Progress */
-#define                AT91_MCI_NOTBUSY        (1 <<  5)       /* Data Not Busy */
-#define                AT91_MCI_ENDRX          (1 <<  6)       /* End of RX Buffer */
-#define                AT91_MCI_ENDTX          (1 <<  7)       /* End fo TX Buffer */
-#define                AT91_MCI_SDIOIRQA       (1 <<  8)       /* SDIO Interrupt for Slot A */
-#define                AT91_MCI_SDIOIRQB       (1 <<  9)       /* SDIO Interrupt for Slot B */
-#define                AT91_MCI_RXBUFF         (1 << 14)       /* RX Buffer Full */
-#define                AT91_MCI_TXBUFE         (1 << 15)       /* TX Buffer Empty */
-#define                AT91_MCI_RINDE          (1 << 16)       /* Response Index Error */
-#define                AT91_MCI_RDIRE          (1 << 17)       /* Response Direction Error */
-#define                AT91_MCI_RCRCE          (1 << 18)       /* Response CRC Error */
-#define                AT91_MCI_RENDE          (1 << 19)       /* Response End Bit Error */
-#define                AT91_MCI_RTOE           (1 << 20)       /* Response Time-out Error */
-#define                AT91_MCI_DCRCE          (1 << 21)       /* Data CRC Error */
-#define                AT91_MCI_DTOE           (1 << 22)       /* Data Time-out Error */
-#define                AT91_MCI_OVRE           (1 << 30)       /* Overrun */
-#define                AT91_MCI_UNRE           (1 << 31)       /* Underrun */
-
-#define AT91_MCI_IER           0x44            /* Interrupt Enable Register */
-#define AT91_MCI_IDR           0x48            /* Interrupt Disable Register */
-#define AT91_MCI_IMR           0x4c            /* Interrupt Mask Register */
-
-#endif