[media] mt9p031: Use the common clock framework
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Fri, 21 Dec 2012 19:11:55 +0000 (16:11 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sun, 14 Apr 2013 19:03:22 +0000 (16:03 -0300)
Configure the device external clock using the common clock framework
instead of a board code callback function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/i2c/mt9p031.c
include/media/mt9p031.h

index ecf4492..28cf95b 100644 (file)
@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
@@ -122,6 +123,7 @@ struct mt9p031 {
        struct mutex power_lock; /* lock to protect power_count */
        int power_count;
 
+       struct clk *clk;
        struct regulator *vaa;
        struct regulator *vdd;
        struct regulator *vdd_io;
@@ -200,7 +202,7 @@ static int mt9p031_reset(struct mt9p031 *mt9p031)
                                          0);
 }
 
-static int mt9p031_pll_setup(struct mt9p031 *mt9p031)
+static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 {
        static const struct aptina_pll_limits limits = {
                .ext_clock_min = 6000000,
@@ -221,6 +223,12 @@ static int mt9p031_pll_setup(struct mt9p031 *mt9p031)
        struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
        struct mt9p031_platform_data *pdata = mt9p031->pdata;
 
+       mt9p031->clk = devm_clk_get(&client->dev, NULL);
+       if (IS_ERR(mt9p031->clk))
+               return PTR_ERR(mt9p031->clk);
+
+       clk_set_rate(mt9p031->clk, pdata->ext_freq);
+
        mt9p031->pll.ext_clock = pdata->ext_freq;
        mt9p031->pll.pix_clock = pdata->target_freq;
 
@@ -275,9 +283,8 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
        regulator_enable(mt9p031->vaa);
 
        /* Emable clock */
-       if (mt9p031->pdata->set_xclk)
-               mt9p031->pdata->set_xclk(&mt9p031->subdev,
-                                        mt9p031->pdata->ext_freq);
+       if (mt9p031->clk)
+               clk_prepare_enable(mt9p031->clk);
 
        /* Now RESET_BAR must be high */
        if (mt9p031->reset != -1) {
@@ -299,8 +306,8 @@ static void mt9p031_power_off(struct mt9p031 *mt9p031)
        regulator_disable(mt9p031->vdd_io);
        regulator_disable(mt9p031->vdd);
 
-       if (mt9p031->pdata->set_xclk)
-               mt9p031->pdata->set_xclk(&mt9p031->subdev, 0);
+       if (mt9p031->clk)
+               clk_disable_unprepare(mt9p031->clk);
 }
 
 static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on)
@@ -1033,7 +1040,7 @@ static int mt9p031_probe(struct i2c_client *client,
                mt9p031->reset = pdata->reset;
        }
 
-       ret = mt9p031_pll_setup(mt9p031);
+       ret = mt9p031_clk_setup(mt9p031);
 
 done:
        if (ret < 0) {
index 0c97b19..b1e63f2 100644 (file)
@@ -5,13 +5,11 @@ struct v4l2_subdev;
 
 /*
  * struct mt9p031_platform_data - MT9P031 platform data
- * @set_xclk: Clock frequency set callback
  * @reset: Chip reset GPIO (set to -1 if not used)
  * @ext_freq: Input clock frequency
  * @target_freq: Pixel clock frequency
  */
 struct mt9p031_platform_data {
-       int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
        int reset;
        int ext_freq;
        int target_freq;