arm:exynos4:trats: Use pinmux for mmc configuration

This patch use the pinmux for mmc configuration for Trats

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 7b981fa..57400ce 100644 (file)
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -29,6 +29,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/mipi_dsim.h>
@@ -157,54 +158,22 @@ int board_mmc_init(bd_t *bis)
 {
        struct exynos4_gpio_part2 *gpio =
                (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-       int i, err;
+       int err;
 
        /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
        s5p_gpio_direction_output(&gpio->k0, 2, 1);
        s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
 
        /*
-        * eMMC GPIO:
-        * SDR 8-bit@48MHz at MMC0
-        * GPK0[0]      SD_0_CLK(2)
-        * GPK0[1]      SD_0_CMD(2)
-        * GPK0[2]      SD_0_CDn        -> Not used
-        * GPK0[3:6]    SD_0_DATA[0:3](2)
-        * GPK1[3:6]    SD_0_DATA[0:3](3)
-        *
-        * DDR 4-bit@26MHz at MMC4
-        * GPK0[0]      SD_4_CLK(3)
-        * GPK0[1]      SD_4_CMD(3)
-        * GPK0[2]      SD_4_CDn        -> Not used
-        * GPK0[3:6]    SD_4_DATA[0:3](3)
-        * GPK1[3:6]    SD_4_DATA[4:7](4)
-        */
-       for (i = 0; i < 7; i++) {
-               if (i == 2)
-                       continue;
-               /* GPK0[0:6] special function 2 */
-               s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
-               /* GPK0[0:6] pull disable */
-               s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
-               /* GPK0[0:6] drv 4x */
-               s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
-       }
-
-       for (i = 3; i < 7; i++) {
-               /* GPK1[3:6] special function 3 */
-               s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
-               /* GPK1[3:6] pull disable */
-               s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
-               /* GPK1[3:6] drv 4x */
-               s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
-       }
-
-       /*
         * MMC device init
         * mmc0  : eMMC (8-bit buswidth)
         * mmc2  : SD card (4-bit buswidth)
         */
-       err = s5p_mmc_init(0, 8);
+       err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
+       if (err)
+               debug("SDMMC0 not configured\n");
+       else
+               err = s5p_mmc_init(0, 8);
 
        /* T-flash detect */
        s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
@@ -215,24 +184,11 @@ int board_mmc_init(bd_t *bis)
         * GPX3[4] T-flash detect pin
         */
        if (!s5p_gpio_get_value(&gpio->x3, 4)) {
-               /*
-                * SD card GPIO:
-                * GPK2[0]      SD_2_CLK(2)
-                * GPK2[1]      SD_2_CMD(2)
-                * GPK2[2]      SD_2_CDn        -> Not used
-                * GPK2[3:6]    SD_2_DATA[0:3](2)
-                */
-               for (i = 0; i < 7; i++) {
-                       if (i == 2)
-                               continue;
-                       /* GPK2[0:6] special function 2 */
-                       s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
-                       /* GPK2[0:6] pull disable */
-                       s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
-                       /* GPK2[0:6] drv 4x */
-                       s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
-               }
-               err = s5p_mmc_init(2, 4);
+               err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+               if (err)
+                       debug("SDMMC2 not configured\n");
+               else
+                       err = s5p_mmc_init(2, 4);
        }
 
        return err;