staging: comedi: addi_eeprom: add defines for the 93c76 eeprom bits

Define the magic values used for the clock, chip-select, data out,
and data in signals to the 93c76 eeprom.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index 935da64..6a2c389 100644 (file)
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -48,6 +48,11 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #define NVCMD_BEGIN_READ       (0x7 << 5)      /*  nvRam begin read command */
 #define NVCMD_LOAD_LOW         (0x4 << 5)      /*  nvRam load low command */
 #define NVCMD_LOAD_HIGH        (0x5 << 5)      /*  nvRam load high command */
+
+#define EE93C76_CLK_BIT                (1 << 0)
+#define EE93C76_CS_BIT         (1 << 1)
+#define EE93C76_DOUT_BIT       (1 << 2)
+#define EE93C76_DIN_BIT                (1 << 3)
 #define EE76_CMD_LEN           13      /*  bits in instructions */
 #define EE_READ                0x0180  /*  01 1000 0000 read instruction */
 
@@ -110,12 +115,10 @@ struct str_AnalogInputHeader {
 static void v_EepromClock76(unsigned long iobase,
                            unsigned int dw_RegisterValue)
 {
-       /* Set EEPROM clock Low */
-       outl(dw_RegisterValue & 0x6, iobase);
+       outl(dw_RegisterValue & ~EE93C76_CLK_BIT, iobase);
        udelay(100);
 
-       /* Set EEPROM clock High */
-       outl(dw_RegisterValue | 0x1, iobase);
+       outl(dw_RegisterValue | EE93C76_CLK_BIT, iobase);
        udelay(100);
 }
 
@@ -123,11 +126,8 @@ static void v_EepromSendCommand76(unsigned long iobase,
                                  unsigned int dw_EepromCommand,
                                  unsigned char b_DataLengthInBits)
 {
+       unsigned int dw_RegisterValue = EE93C76_CS_BIT;
        char c_BitPos = 0;
-       unsigned int dw_RegisterValue = 0;
-
-       /* Enable EEPROM Chip Select */
-       dw_RegisterValue = 0x2;
 
        /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
        outl(dw_RegisterValue, iobase);
@@ -135,13 +135,10 @@ static void v_EepromSendCommand76(unsigned long iobase,
 
        /* Send EEPROM command - one bit at a time */
        for (c_BitPos = (b_DataLengthInBits - 1); c_BitPos >= 0; c_BitPos--) {
-               if (dw_EepromCommand & (1 << c_BitPos)) {
-                       /* Write 1 */
-                       dw_RegisterValue = dw_RegisterValue | 0x4;
-               } else {
-                       /* Write 0 */
-                       dw_RegisterValue = dw_RegisterValue & 0x3;
-               }
+               if (dw_EepromCommand & (1 << c_BitPos))
+                       dw_RegisterValue = dw_RegisterValue | EE93C76_DOUT_BIT;
+               else
+                       dw_RegisterValue = dw_RegisterValue & ~EE93C76_DOUT_BIT;
 
                /* Write the command */
                outl(dw_RegisterValue, iobase);
@@ -165,7 +162,7 @@ static void v_EepromCs76Read(unsigned long iobase,
                EE76_CMD_LEN);
 
        /* Get the last register value */
-       dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | 0x2;
+       dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | EE93C76_CS_BIT;
 
        /* Set the 16-bit value of 0 */
        *pw_Value = 0;
@@ -180,7 +177,7 @@ static void v_EepromCs76Read(unsigned long iobase,
                udelay(100);
 
                /* Get bit value and shift into result */
-               if (dw_RegisterValueRead & 0x8) {
+               if (dw_RegisterValueRead & EE93C76_DIN_BIT) {
                        /* Read 1 */
                        *pw_Value = (*pw_Value << 1) | 0x1;
                } else {