{
phys_reset_t phys_reset;
- BUG_ON(!platform_ops);
+ if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
+ return;
BUG_ON(!irqs_disabled());
/*
{
phys_reset_t phys_reset;
- BUG_ON(!platform_ops);
+ if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+ return;
BUG_ON(!irqs_disabled());
/* Very similar to mcpm_cpu_power_down() */
#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
/*
* Certain hardware parameters determined at the time of device manufacture,
*/
#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
+#define param_start(x) (void *)(x)
#else
#define PARAM_BASE 0xa0000a00
+#define param_start(x) __va(x)
#endif
#define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 ) | ( b << 8 ) | a )
void sharpsl_save_param(void)
{
- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
+ memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
sharpsl_param.comadj=-1;
generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += unaligned.h
*
* This must be called with interrupts disabled.
*
- * This does not return. Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return. Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_power_down(void);
*
* This must be called with interrupts disabled.
*
- * This does not return. Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return. Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_suspend(u64 expected_residency);
unsigned int i, unsigned int n,
unsigned long *args)
{
+ if (n == 0)
+ return;
+
if (i + n > SYSCALL_MAX_ARGS) {
unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
unsigned int i, unsigned int n,
const unsigned long *args)
{
+ if (n == 0)
+ return;
+
if (i + n > SYSCALL_MAX_ARGS) {
pr_warning("%s called with max args %d, handling only %d\n",
__func__, i + n, SYSCALL_MAX_ARGS);
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
and r0, r0, #0xc0000000 @ multiprocessing extensions and
teq r0, #0x80000000 @ not part of a uniprocessor system?
- moveq pc, lr @ yes, assume SMP
+ bne __fixup_smp_on_up @ no, assume UP
+
+ @ Core indicates it is SMP. Check for Aegis SOC where a single
+ @ Cortex-A9 CPU is present but SMP operations fault.
+ mov r4, #0x41000000
+ orr r4, r4, #0x0000c000
+ orr r4, r4, #0x00000090
+ teq r3, r4 @ Check for ARM Cortex-A9
+ movne pc, lr @ Not ARM Cortex-A9,
+
+ @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
+ @ below address check will need to be #ifdef'd or equivalent
+ @ for the Aegis platform.
+ mrc p15, 4, r0, c15, c0 @ get SCU base address
+ teq r0, #0x0 @ '0' on actual UP A9 hardware
+ beq __fixup_smp_on_up @ So its an A9 UP
+ ldr r0, [r0, #4] @ read SCU Config
+ and r0, r0, #0x3 @ number of CPUs
+ teq r0, #0x0 @ is 1?
+ movne pc, lr
__fixup_smp_on_up:
adr r0, 1f