phy/micrel: add ability to support 50MHz RMII clock on KZS8051RNL

Platform code can now set the MICREL_PHY_50MHZ_CLK bit of dev_flags in a fixup
routine (registered with phy_register_fixup_for_uid()), to make the KZS8051RNL
PHY work with 50MHz RMII reference clock.

Cc: David J. Choi <david.choi@micrel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0fd1678..590f902 100644 (file)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -19,13 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/phy.h>
-
-#define        PHY_ID_KSZ9021                  0x00221611
-#define        PHY_ID_KS8737                   0x00221720
-#define        PHY_ID_KS8041                   0x00221510
-#define        PHY_ID_KS8051                   0x00221550
-/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
-#define        PHY_ID_KS8001                   0x0022161A
+#include <linux/micrel_phy.h>
 
 /* general Interrupt control/status reg in vendor specific block. */
 #define MII_KSZPHY_INTCS                       0x1B
@@ -46,6 +40,7 @@
 #define KSZPHY_CTRL_INT_ACTIVE_HIGH            (1 << 9)
 #define KSZ9021_CTRL_INT_ACTIVE_HIGH           (1 << 14)
 #define KS8737_CTRL_INT_ACTIVE_HIGH            (1 << 14)
+#define KSZ8051_RMII_50MHZ_CLK                 (1 << 7)
 
 static int kszphy_ack_interrupt(struct phy_device *phydev)
 {
@@ -106,6 +101,19 @@ static int kszphy_config_init(struct phy_device *phydev)
        return 0;
 }
 
+static int ks8051_config_init(struct phy_device *phydev)
+{
+       int regval;
+
+       if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+               regval = phy_read(phydev, MII_KSZPHY_CTRL);
+               regval |= KSZ8051_RMII_50MHZ_CLK;
+               phy_write(phydev, MII_KSZPHY_CTRL, regval);
+       }
+
+       return 0;
+}
+
 static struct phy_driver ks8737_driver = {
        .phy_id         = PHY_ID_KS8737,
        .phy_id_mask    = 0x00fffff0,
@@ -142,7 +150,7 @@ static struct phy_driver ks8051_driver = {
        .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
                                | SUPPORTED_Asym_Pause),
        .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-       .config_init    = kszphy_config_init,
+       .config_init    = ks8051_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .ack_interrupt  = kszphy_ack_interrupt,

diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
new file mode 100644 (file)
index 0000000..dd8da34
--- /dev/null
+++ b/include/linux/micrel_phy.h
@@ -0,0 +1,16 @@
+#ifndef _MICREL_PHY_H
+#define _MICREL_PHY_H
+
+#define MICREL_PHY_ID_MASK     0x00fffff0
+
+#define PHY_ID_KSZ9021         0x00221611
+#define PHY_ID_KS8737          0x00221720
+#define PHY_ID_KS8041          0x00221510
+#define PHY_ID_KS8051          0x00221550
+/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
+#define PHY_ID_KS8001          0x0022161A
+
+/* struct phy_device dev_flags definitions */
+#define MICREL_PHY_50MHZ_CLK   0x00000001
+
+#endif /* _MICREL_PHY_H */