arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates

[ Upstream commit 439677d416b17dd39964d5f7d64b742a2e51da5b ]

We found that (at least some versions of) the sci-fw set the base clock
rate for UARTs in the MCU domain to 96 MHz instead of the expected 48 MHz,
leading to incorrect baud rates when used from Linux.

As the 8250_omap driver will query the actual clock rate from the clk
driver when clock-frequency is unset, removing the incorrect property is
sufficient to fix the baud rate.

Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220419075157.189347-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 59cc58f7d0c8791d1fa211da9f480753d20f9fed..93e684bbd66cd9eacc60f2600b64f022c5528598 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -10,7 +10,6 @@
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a00000 0x00 0x100>;
                interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 149 0>;
@@ -21,7 +20,6 @@
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a10000 0x00 0x100>;
                interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 160 0>;