ASoC: Convert WM8903 driver to register at I2C probe time
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 10 Dec 2008 18:36:42 +0000 (18:36 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 10 Dec 2008 19:47:44 +0000 (19:47 +0000)
The driver now registers the codec and DAI when probed as an I2C device.
Also convert the driver to use a single dynamic allocation to simplify
error handling.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
sound/soc/codecs/wm8903.c
sound/soc/codecs/wm8903.h

index b1f5cf7..c80968f 100644 (file)
 
 #include "wm8903.h"
 
-struct wm8903_priv {
-       int sysclk;
-
-       /* Reference counts */
-       int charge_pump_users;
-       int class_w_users;
-       int playback_active;
-       int capture_active;
-
-       struct snd_pcm_substream *master_substream;
-       struct snd_pcm_substream *slave_substream;
-};
-
 /* Register defaults at reset */
 static u16 wm8903_reg_defaults[] = {
        0x8903,     /* R0   - SW Reset and ID */
@@ -223,6 +210,23 @@ static u16 wm8903_reg_defaults[] = {
        0x0000,     /* R172 - Analogue Output Bias 0 */
 };
 
+struct wm8903_priv {
+       struct snd_soc_codec codec;
+       u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
+
+       int sysclk;
+
+       /* Reference counts */
+       int charge_pump_users;
+       int class_w_users;
+       int playback_active;
+       int capture_active;
+
+       struct snd_pcm_substream *master_substream;
+       struct snd_pcm_substream *slave_substream;
+};
+
+
 static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
                                                 unsigned int reg)
 {
@@ -360,6 +364,8 @@ static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache)
 static void wm8903_reset(struct snd_soc_codec *codec)
 {
        wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+       memcpy(codec->reg_cache, wm8903_reg_defaults,
+              sizeof(wm8903_reg_defaults));
 }
 
 #define WM8903_OUTPUT_SHORT 0x8
@@ -1563,39 +1569,48 @@ static int wm8903_resume(struct platform_device *pdev)
        return 0;
 }
 
-/*
- * initialise the WM8903 driver
- * register the mixer and dsp interfaces with the kernel
- */
-static int wm8903_init(struct snd_soc_device *socdev)
+static struct snd_soc_codec *wm8903_codec;
+
+static int wm8903_i2c_probe(struct i2c_client *i2c,
+                           const struct i2c_device_id *id)
 {
-       struct snd_soc_codec *codec = socdev->codec;
-       struct i2c_client *i2c = codec->control_data;
-       int ret = 0;
+       struct wm8903_priv *wm8903;
+       struct snd_soc_codec *codec;
+       int ret;
        u16 val;
 
-       val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
-       if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
-               dev_err(&i2c->dev,
-                       "Device with ID register %x is not a WM8903\n", val);
-               return -ENODEV;
-       }
+       wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+       if (wm8903 == NULL)
+               return -ENOMEM;
 
+       codec = &wm8903->codec;
+
+       mutex_init(&codec->mutex);
+       INIT_LIST_HEAD(&codec->dapm_widgets);
+       INIT_LIST_HEAD(&codec->dapm_paths);
+
+       codec->dev = &i2c->dev;
        codec->name = "WM8903";
        codec->owner = THIS_MODULE;
        codec->read = wm8903_read;
        codec->write = wm8903_write;
+       codec->hw_write = (hw_write_t)i2c_master_send;
        codec->bias_level = SND_SOC_BIAS_OFF;
        codec->set_bias_level = wm8903_set_bias_level;
        codec->dai = &wm8903_dai;
        codec->num_dai = 1;
-       codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
-       codec->reg_cache = kmemdup(wm8903_reg_defaults,
-                                  sizeof(wm8903_reg_defaults),
-                                  GFP_KERNEL);
-       if (codec->reg_cache == NULL) {
-               dev_err(&i2c->dev, "Failed to allocate register cache\n");
-               return -ENOMEM;
+       codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
+       codec->reg_cache = &wm8903->reg_cache[0];
+       codec->private_data = wm8903;
+
+       i2c_set_clientdata(i2c, codec);
+       codec->control_data = i2c;
+
+       val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+       if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
+               dev_err(&i2c->dev,
+                       "Device with ID register %x is not a WM8903\n", val);
+               return -ENODEV;
        }
 
        val = wm8903_read(codec, WM8903_REVISION_NUMBER);
@@ -1604,13 +1619,6 @@ static int wm8903_init(struct snd_soc_device *socdev)
 
        wm8903_reset(codec);
 
-       /* register pcms */
-       ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-       if (ret < 0) {
-               dev_err(&i2c->dev, "failed to create pcms\n");
-               goto pcm_err;
-       }
-
        /* SYSCLK is required for pretty much anything */
        wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
 
@@ -1648,47 +1656,45 @@ static int wm8903_init(struct snd_soc_device *socdev)
        val |= WM8903_DAC_MUTEMODE;
        wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
 
-       wm8903_add_controls(codec);
-       wm8903_add_widgets(codec);
-       ret = snd_soc_init_card(socdev);
-       if (ret < 0) {
-               dev_err(&i2c->dev, "wm8903: failed to register card\n");
-               goto card_err;
+       wm8903_dai.dev = &i2c->dev;
+       wm8903_codec = codec;
+
+       ret = snd_soc_register_codec(codec);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
+               goto err;
+       }
+
+       ret = snd_soc_register_dai(&wm8903_dai);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
+               goto err_codec;
        }
 
        return ret;
 
-card_err:
-       snd_soc_free_pcms(socdev);
-       snd_soc_dapm_free(socdev);
-pcm_err:
-       kfree(codec->reg_cache);
+err_codec:
+       snd_soc_unregister_codec(codec);
+err:
+       wm8903_codec = NULL;
+       kfree(wm8903);
        return ret;
 }
 
-static struct snd_soc_device *wm8903_socdev;
-
-static int wm8903_i2c_probe(struct i2c_client *i2c,
-                           const struct i2c_device_id *id)
+static int wm8903_i2c_remove(struct i2c_client *client)
 {
-       struct snd_soc_device *socdev = wm8903_socdev;
-       struct snd_soc_codec *codec = socdev->codec;
-       int ret;
+       struct snd_soc_codec *codec = i2c_get_clientdata(client);
 
-       i2c_set_clientdata(i2c, codec);
-       codec->control_data = i2c;
+       snd_soc_unregister_dai(&wm8903_dai);
+       snd_soc_unregister_codec(codec);
 
-       ret = wm8903_init(socdev);
-       if (ret < 0)
-               dev_err(&i2c->dev, "Device initialisation failed\n");
+       wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
-       return ret;
-}
+       kfree(codec->private_data);
+
+       wm8903_codec = NULL;
+       wm8903_dai.dev = NULL;
 
-static int wm8903_i2c_remove(struct i2c_client *client)
-{
-       struct snd_soc_codec *codec = i2c_get_clientdata(client);
-       kfree(codec->reg_cache);
        return 0;
 }
 
@@ -1712,75 +1718,37 @@ static struct i2c_driver wm8903_i2c_driver = {
 static int wm8903_probe(struct platform_device *pdev)
 {
        struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-       struct wm8903_setup_data *setup;
-       struct snd_soc_codec *codec;
-       struct wm8903_priv *wm8903;
-       struct i2c_board_info board_info;
-       struct i2c_adapter *adapter;
-       struct i2c_client *i2c_client;
        int ret = 0;
 
-       setup = socdev->codec_data;
-
-       if (!setup->i2c_address) {
-               dev_err(&pdev->dev, "No codec address provided\n");
-               return -ENODEV;
+       if (!wm8903_codec) {
+               dev_err(&pdev->dev, "I2C device not yet probed\n");
+               goto err;
        }
 
-       codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-       if (codec == NULL)
-               return -ENOMEM;
+       socdev->codec = wm8903_codec;
 
-       wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
-       if (wm8903 == NULL) {
-               ret = -ENOMEM;
-               goto err_codec;
+       /* register pcms */
+       ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "failed to create pcms\n");
+               goto err;
        }
 
-       codec->private_data = wm8903;
-       socdev->codec = codec;
-       mutex_init(&codec->mutex);
-       INIT_LIST_HEAD(&codec->dapm_widgets);
-       INIT_LIST_HEAD(&codec->dapm_paths);
+       wm8903_add_controls(socdev->codec);
+       wm8903_add_widgets(socdev->codec);
 
-       wm8903_socdev = socdev;
-
-       codec->hw_write = (hw_write_t)i2c_master_send;
-       ret = i2c_add_driver(&wm8903_i2c_driver);
-       if (ret != 0) {
-               dev_err(&pdev->dev, "can't add i2c driver\n");
-               goto err_priv;
-       } else {
-               memset(&board_info, 0, sizeof(board_info));
-               strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
-               board_info.addr = setup->i2c_address;
-
-               adapter = i2c_get_adapter(setup->i2c_bus);
-               if (!adapter) {
-                       dev_err(&pdev->dev, "Can't get I2C bus %d\n",
-                               setup->i2c_bus);
-                       ret = -ENODEV;
-                       goto err_adapter;
-               }
-
-               i2c_client = i2c_new_device(adapter, &board_info);
-               i2c_put_adapter(adapter);
-               if (i2c_client == NULL) {
-                       dev_err(&pdev->dev,
-                               "I2C driver registration failed\n");
-                       ret = -ENODEV;
-                       goto err_adapter;
-               }
+       ret = snd_soc_init_card(socdev);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "wm8903: failed to register card\n");
+               goto card_err;
        }
 
        return ret;
 
-err_adapter:
-       i2c_del_driver(&wm8903_i2c_driver);
-err_priv:
-       kfree(codec->private_data);
-err_codec:
-       kfree(codec);
+card_err:
+       snd_soc_free_pcms(socdev);
+       snd_soc_dapm_free(socdev);
+err:
        return ret;
 }
 
@@ -1795,10 +1763,6 @@ static int wm8903_remove(struct platform_device *pdev)
 
        snd_soc_free_pcms(socdev);
        snd_soc_dapm_free(socdev);
-       i2c_unregister_device(socdev->codec->control_data);
-       i2c_del_driver(&wm8903_i2c_driver);
-       kfree(codec->private_data);
-       kfree(codec);
 
        return 0;
 }
@@ -1813,13 +1777,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
 
 static int __init wm8903_modinit(void)
 {
-       return snd_soc_register_dai(&wm8903_dai);
+       return i2c_add_driver(&wm8903_i2c_driver);
 }
 module_init(wm8903_modinit);
 
 static void __exit wm8903_exit(void)
 {
-       snd_soc_unregister_dai(&wm8903_dai);
+       i2c_del_driver(&wm8903_i2c_driver);
 }
 module_exit(wm8903_exit);
 
index cec622f..0ea27e2 100644 (file)
 extern struct snd_soc_dai wm8903_dai;
 extern struct snd_soc_codec_device soc_codec_dev_wm8903;
 
-struct wm8903_setup_data {
-       int i2c_bus;
-       int i2c_address;
-};
-
 #define WM8903_MCLK_DIV_2 1
 #define WM8903_CLK_SYS    2
 #define WM8903_BCLK       3