mac80211: move ieee80211_enable_ht function to mlme.c

It really belongs into that file since it is only relevant
for managed mode. Move 1:1, not even whitespace changes,
but make it static and remove from header file.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 4e3c72f..73bd427 100644 (file)
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -83,89 +83,6 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
                ht_cap->mcs.rx_mask[32/8] |= 1;
 }
 
-/*
- * ieee80211_enable_ht should be called only after the operating band
- * has been determined as ht configuration depends on the hw's
- * HT abilities for a specific band.
- */
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-                       struct ieee80211_ht_info *hti,
-                       u16 ap_ht_cap_flags)
-{
-       struct ieee80211_local *local = sdata->local;
-       struct ieee80211_supported_band *sband;
-       struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-       struct ieee80211_bss_ht_conf ht;
-       struct sta_info *sta;
-       u32 changed = 0;
-       bool enable_ht = true, ht_changed;
-       enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
-
-       sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-       memset(&ht, 0, sizeof(ht));
-
-       /* HT is not supported */
-       if (!sband->ht_cap.ht_supported)
-               enable_ht = false;
-
-       /* check that channel matches the right operating channel */
-       if (local->hw.conf.channel->center_freq !=
-           ieee80211_channel_to_frequency(hti->control_chan))
-               enable_ht = false;
-
-       if (enable_ht) {
-               channel_type = NL80211_CHAN_HT20;
-
-               if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-                   (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
-                   (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
-                       switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-                       case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-                               channel_type = NL80211_CHAN_HT40PLUS;
-                               break;
-                       case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-                               channel_type = NL80211_CHAN_HT40MINUS;
-                               break;
-                       }
-               }
-       }
-
-       ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
-                    channel_type != local->hw.conf.channel_type;
-
-       local->oper_channel_type = channel_type;
-
-       if (ht_changed) {
-                /* channel_type change automatically detected */
-               ieee80211_hw_config(local, 0);
-
-               rcu_read_lock();
-
-               sta = sta_info_get(local, ifmgd->bssid);
-               if (sta)
-                       rate_control_rate_update(local, sband, sta,
-                                                IEEE80211_RC_HT_CHANGED);
-
-               rcu_read_unlock();
-
-        }
-
-       /* disable HT */
-       if (!enable_ht)
-               return 0;
-
-       ht.operation_mode = le16_to_cpu(hti->operation_mode);
-
-       /* if bss configuration changed store the new one */
-       if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
-               changed |= BSS_CHANGED_HT;
-               sdata->vif.bss_conf.ht = ht;
-       }
-
-       return changed;
-}
-
 void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta)
 {
        int i;

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 312347d..73d9f89 100644 (file)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -995,9 +995,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
 void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
                                       struct ieee80211_ht_cap *ht_cap_ie,
                                       struct ieee80211_sta_ht_cap *ht_cap);
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-                       struct ieee80211_ht_info *hti,
-                       u16 ap_ht_cap_flags);
 void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
 void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
                          const u8 *da, u16 tid,

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 08db02c..4ce5b9c 100644 (file)
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -80,6 +80,89 @@ static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
        return count;
 }
 
+/*
+ * ieee80211_enable_ht should be called only after the operating band
+ * has been determined as ht configuration depends on the hw's
+ * HT abilities for a specific band.
+ */
+static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
+                              struct ieee80211_ht_info *hti,
+                              u16 ap_ht_cap_flags)
+{
+       struct ieee80211_local *local = sdata->local;
+       struct ieee80211_supported_band *sband;
+       struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+       struct ieee80211_bss_ht_conf ht;
+       struct sta_info *sta;
+       u32 changed = 0;
+       bool enable_ht = true, ht_changed;
+       enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+
+       sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+       memset(&ht, 0, sizeof(ht));
+
+       /* HT is not supported */
+       if (!sband->ht_cap.ht_supported)
+               enable_ht = false;
+
+       /* check that channel matches the right operating channel */
+       if (local->hw.conf.channel->center_freq !=
+           ieee80211_channel_to_frequency(hti->control_chan))
+               enable_ht = false;
+
+       if (enable_ht) {
+               channel_type = NL80211_CHAN_HT20;
+
+               if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+                   (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+                   (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
+                       switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+                       case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+                               channel_type = NL80211_CHAN_HT40PLUS;
+                               break;
+                       case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+                               channel_type = NL80211_CHAN_HT40MINUS;
+                               break;
+                       }
+               }
+       }
+
+       ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
+                    channel_type != local->hw.conf.channel_type;
+
+       local->oper_channel_type = channel_type;
+
+       if (ht_changed) {
+                /* channel_type change automatically detected */
+               ieee80211_hw_config(local, 0);
+
+               rcu_read_lock();
+
+               sta = sta_info_get(local, ifmgd->bssid);
+               if (sta)
+                       rate_control_rate_update(local, sband, sta,
+                                                IEEE80211_RC_HT_CHANGED);
+
+               rcu_read_unlock();
+
+        }
+
+       /* disable HT */
+       if (!enable_ht)
+               return 0;
+
+       ht.operation_mode = le16_to_cpu(hti->operation_mode);
+
+       /* if bss configuration changed store the new one */
+       if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
+               changed |= BSS_CHANGED_HT;
+               sdata->vif.bss_conf.ht = ht;
+       }
+
+       return changed;
+}
+
 /* frame sending functions */
 
 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)