pm3fb: mtrr support and noaccel option

This patch adds usage of MTRR registers and two new options: noaccel and
nomtrr.

[bunk@kernel.org: make pm3fb_init() static again]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 10c0cc6..af615d9 100644 (file)
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -38,6 +38,9 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
 
 #include <video/permedia2.h>
 #include <video/cvisionppc.h>
@@ -73,6 +76,11 @@ static char *mode __devinitdata = NULL;
  */
 static int lowhsync;
 static int lowvsync;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
 
 /*
  * The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
        u32             mem_control;    /* MemControl reg at probe */
        u32             boot_address;   /* BootAddress reg at probe */
        u32             palette[16];
+       int             mtrr_handle;
 };
 
 /*
@@ -1316,6 +1325,15 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
                goto err_exit_mmio;
        }
 
+#ifdef CONFIG_MTRR
+       default_par->mtrr_handle = -1;
+       if (!nomtrr)
+               default_par->mtrr_handle =
+                       mtrr_add(pm2fb_fix.smem_start,
+                                pm2fb_fix.smem_len,
+                                MTRR_TYPE_WRCOMB, 1);
+#endif
+
        info->fbops             = &pm2fb_ops;
        info->fix               = pm2fb_fix;
        info->pseudo_palette    = default_par->palette;
@@ -1324,6 +1342,11 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
                                  FBINFO_HWACCEL_COPYAREA |
                                  FBINFO_HWACCEL_FILLRECT;
 
+       if (noaccel) {
+               printk(KERN_DEBUG "disabling acceleration\n");
+               info->flags |= FBINFO_HWACCEL_DISABLED;
+       }
+
        if (!mode)
                mode = "640x480@60";
 
@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)
 
        unregister_framebuffer(info);
 
+#ifdef CONFIG_MTRR
+       if (par->mtrr_handle >= 0)
+               mtrr_del(par->mtrr_handle, info->fix.smem_start,
+                        info->fix.smem_len);
+#endif /* CONFIG_MTRR */
        iounmap(info->screen_base);
        release_mem_region(fix->smem_start, fix->smem_len);
        iounmap(par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *options)
                        lowhsync = 1;
                } else if(!strcmp(this_opt, "lowvsync")) {
                        lowvsync = 1;
+#ifdef CONFIG_MTRR
+               } else if (!strncmp(this_opt, "nomtrr", 6)) {
+                       nomtrr = 1;
+#endif
+               } else if (!strncmp(this_opt, "noaccel", 7)) {
+                       noaccel = 1;
                } else {
                        mode = this_opt;
                }
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);
 MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
 module_param(lowvsync, bool, 0);
 MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
 
 MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
 MODULE_DESCRIPTION("Permedia2 framebuffer device driver");

diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 88af072..195bcdb 100644 (file)
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -32,6 +32,9 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
 
 #include <video/pm3fb.h>
 
@@ -52,6 +55,12 @@
  * Driver data
  */
 static char *mode_option __devinitdata;
+static int noaccel   __devinitdata = 0;
+
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata = 0;
+#endif
 
 /*
  * This structure defines the hardware state of the graphics card. Normally
@@ -65,6 +74,7 @@ struct pm3_par {
        u32             video;          /* video flags before blanking */
        u32             base;           /* screen base (xoffset+yoffset) in 128 bits unit */
        u32             palette[16];
+       int             mtrr_handle;
 };
 
 /*
@@ -1244,6 +1254,13 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
        }
        info->screen_size = pm3fb_fix.smem_len;
 
+#ifdef CONFIG_MTRR
+       if (!nomtrr) {
+               par->mtrr_handle = mtrr_add(pm3fb_fix.smem_start,
+                                               pm3fb_fix.smem_len,
+                                               MTRR_TYPE_WRCOMB, 1);
+       }
+#endif
        info->fbops = &pm3fb_ops;
 
        par->video = PM3_READ_REG(par, PM3VideoControl);
@@ -1257,6 +1274,10 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
                        FBINFO_HWACCEL_IMAGEBLIT |
                        FBINFO_HWACCEL_FILLRECT;
 
+       if (noaccel) {
+               printk(KERN_DEBUG "disabling acceleration\n");
+               info->flags |= FBINFO_HWACCEL_DISABLED;
+       }
        info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
        if (!info->pixmap.addr) {
                retval = -ENOMEM;
@@ -1330,6 +1351,11 @@ static void __devexit pm3fb_remove(struct pci_dev *dev)
                unregister_framebuffer(info);
                fb_dealloc_cmap(&info->cmap);
 
+#ifdef CONFIG_MTRR
+       if (par->mtrr_handle >= 0)
+               mtrr_del(par->mtrr_handle, info->fix.smem_start,
+                        info->fix.smem_len);
+#endif /* CONFIG_MTRR */
                iounmap(info->screen_base);
                release_mem_region(fix->smem_start, fix->smem_len);
                iounmap(par->v_regs);
@@ -1357,22 +1383,72 @@ static struct pci_driver pm3fb_driver = {
 
 MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
 
+#ifndef MODULE
+       /*
+        *  Setup
+        */
+
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+static int __init pm3fb_setup(char *options)
+{
+       char *this_opt;
+
+       /* Parse user speficied options (`video=pm3fb:') */
+       if (!options || !*options)
+               return 0;
+
+       while ((this_opt = strsep(&options, ",")) != NULL) {
+               if (!*this_opt)
+                       continue;
+               else if (!strncmp(this_opt, "noaccel", 7)) {
+                       noaccel = 1;
+#ifdef CONFIG_MTRR
+               } else if (!strncmp(this_opt, "nomtrr", 6)) {
+                       nomtrr = 1;
+#endif
+               } else {
+                       mode_option = this_opt;
+               }
+       }
+       return 0;
+}
+#endif /* MODULE */
+
 static int __init pm3fb_init(void)
 {
+       /*
+        *  For kernel boot options (in 'video=pm3fb:<options>' format)
+        */
 #ifndef MODULE
-       if (fb_get_options("pm3fb", NULL))
+       char *option = NULL;
+
+       if (fb_get_options("pm3fb", &option))
                return -ENODEV;
+       pm3fb_setup(option);
 #endif
+
        return pci_register_driver(&pm3fb_driver);
 }
 
+#ifdef MODULE
 static void __exit pm3fb_exit(void)
 {
        pci_unregister_driver(&pm3fb_driver);
 }
 
-module_init(pm3fb_init);
 module_exit(pm3fb_exit);
+#endif
+module_init(pm3fb_init);
+
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
 
 MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
 MODULE_LICENSE("GPL");