ARM: dts: NSP: Add DT files for Meraki MX64 series

MX64 & MX64W Hardware info:
  - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
  - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
  - Storage: 1 GB (Micron MT29F8G08ABACA)
  - Networking: BCM58625 internal switch (5x 1GbE ports)
  - USB: 1x USB2.0
  - Serial: Internal header
  - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus

This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724d86c704768e46600daaa828dc2c9..74b8449c0a1dcd7feae9cc96b0ca11e1ca8efaa4 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -157,6 +157,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
        bcm958525xmc.dtb \
        bcm958622hr.dtb \
        bcm958623hr.dtb \
+       bcm958625-meraki-mx64.dtb \
+       bcm958625-meraki-mx64-a0.dtb \
+       bcm958625-meraki-mx64w.dtb \
+       bcm958625-meraki-mx64w-a0.dtb \
        bcm958625hr.dtb \
        bcm988312hr.dtb \
        bcm958625k.dtb

diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644 (file)
index 0000000..7c487c7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+       keys {
+               compatible = "gpio-keys-polled";
+               autorepeat;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       /* green:lan1-left */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <0>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+               };
+
+               led-1 {
+                       /* green:lan1-right */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <1>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+               };
+
+               led-2 {
+                       /* green:lan2-left */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <2>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+               };
+
+               led-3 {
+                       /* green:lan2-right */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <3>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+               };
+
+               led-4 {
+                       /* green:lan3-left */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <4>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+               };
+
+               led-5 {
+                       /* green:lan3-right */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <5>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+               };
+
+               led-6 {
+                       /* green:lan4-left */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <6>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+               };
+
+               led-7 {
+                       /* green:lan4-right */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <7>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+               };
+
+               led-8 {
+                       /* green:wan-left */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <8>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+               };
+
+               led-9 {
+                       /* green:wan-right */
+                       function = LED_FUNCTION_ACTIVITY;
+                       function-enumerator = <9>;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+               };
+
+               led-a {
+                       /* amber:power */
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_AMBER>;
+                       gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               led-b {
+                       /* white:status */
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&srab {
+       compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+       status = "okay";
+
+       ports {
+               port@0 {
+                       label = "lan1";
+                       reg = <0>;
+               };
+
+               port@1 {
+                       label = "lan2";
+                       reg = <1>;
+               };
+
+               port@2 {
+                       label = "lan3";
+                       reg = <2>;
+               };
+
+               port@3 {
+                       label = "lan4";
+                       reg = <3>;
+               };
+
+               port@4 {
+                       label = "wan";
+                       reg = <4>;
+               };
+
+               port@8 {
+                       ethernet = <&amac2>;
+                       reg = <8>;
+                       fixed-link {
+                               speed = <1000>;
+                               full-duplex;
+                       };
+               };
+       };
+};

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644 (file)
index 0000000..9944566
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+       model = "Cisco Meraki MX64(A0)";
+       compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@60000000 {
+               device_type = "memory";
+               reg = <0x60000000 0x80000000>;
+       };
+};

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644 (file)
index 0000000..0693943
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+       model = "Cisco Meraki MX64";
+       compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@60000000 {
+               device_type = "memory";
+               reg = <0x60000000 0x80000000>;
+       };
+};

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644 (file)
index 0000000..112fddb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+       model = "Cisco Meraki MX64W(A0)";
+       compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@60000000 {
+               device_type = "memory";
+               reg = <0x60000000 0x80000000>;
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644 (file)
index 0000000..de2e367
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+       model = "Cisco Meraki MX64W";
+       compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@60000000 {
+               device_type = "memory";
+               reg = <0x60000000 0x80000000>;
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+};