WAN: don't mention syncppp in z8530 DocBook.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>

diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl
index 42c75ba..a42a8a4 100644 (file)
--- a/Documentation/DocBook/z8530book.tmpl
+++ b/Documentation/DocBook/z8530book.tmpl
@@ -69,12 +69,6 @@
        device to be used as both a tty interface and as a synchronous 
        controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-       The support code handles most common card configurations and
-       supports running both Cisco HDLC and Synchronous PPP. With extra
-       glue the frame relay and X.25 protocols can also be used with this
-       driver.
-  </para>
   </chapter>
   
   <chapter id="Driver_Modes">
@@ -179,35 +173,27 @@
   <para>
        If you wish to use the network interface facilities of the driver,
        then you need to attach a network device to each channel that is
-       present and in use. In addition to use the SyncPPP and Cisco HDLC
+       present and in use. In addition to use the generic HDLC
        you need to follow some additional plumbing rules. They may seem 
        complex but a look at the example hostess_sv11 driver should
        reassure you.
   </para>
   <para>
        The network device used for each channel should be pointed to by
-       the netdevice field of each channel. The dev-&gt; priv field of the
+       the netdevice field of each channel. The hdlc-&gt; priv field of the
        network device points to your private data - you will need to be
-       able to find your ppp device from this. In addition to use the
-       sync ppp layer the private data must start with a void * pointer
-       to the syncppp structures.
+       able to find your private data from this.
   </para>
   <para>
        The way most drivers approach this particular problem is to
        create a structure holding the Z8530 device definition and
-       put that and the syncppp pointer into the private field of
-       the network device. The network device fields of the channels
-       then point back to the network devices. The ppp_device can also
-       be put in the private structure conveniently.
+       put that into the private field of the network device. The
+       network device fields of the channels then point back to the
+       network devices.
   </para>
   <para>
-       If you wish to use the synchronous ppp then you need to attach
-       the syncppp layer to the network device. You should do this before
-       you register the network device. The
-       <function>sppp_attach</function> requires that the first void *
-       pointer in your private data is pointing to an empty struct
-       ppp_device. The function fills in the initial data for the
-       ppp/hdlc layer.
+       If you wish to use the generic HDLC then you need to register
+       the HDLC device.
   </para>
   <para>
        Before you register your network device you will also need to
@@ -314,10 +300,10 @@
        buffer in sk_buff format and queues it for transmission. The
        caller must provide the entire packet with the exception of the
        bitstuffing and CRC. This is normally done by the caller via
-       the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-       the buffer it becomes property of the Z8530 layer and the caller 
-       should not free it. 
+       the generic HDLC interface layer. It returns 0 if the buffer has been
+       queued and non zero values for queue full. If the function accepts
+       the buffer it becomes property of the Z8530 layer and the caller
+       should not free it.
   </para>
   <para>
        The function <function>z8530_get_stats</function> returns a pointer