arm64: dts: imx8mp-evk: Add PCIe support

Add PCIe support on i.MX8MP EVK board.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index f6b017a..9f1469d 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -33,6 +34,12 @@
                      <0x1 0x00000000 0 0xc0000000>;
        };
 
+       pcie0_refclk: pcie0-refclk {
+               compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <100000000>;
+       };
+
        reg_can1_stby: regulator-can1-stby {
                compatible = "regulator-fixed";
                regulator-name = "can1-stby";
@@ -55,6 +62,17 @@
                enable-active-high;
        };
 
+       reg_pcie0: regulator-pcie {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pcie0_reg>;
+               regulator-name = "MPCIE_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
        reg_usdhc2_vmmc: regulator-usdhc2 {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -350,6 +368,28 @@
         */
 };
 
+&pcie_phy {
+       fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+       clocks = <&pcie0_refclk>;
+       clock-names = "ref";
+       status = "okay";
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie0>;
+       reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+                <&clk IMX8MP_CLK_PCIE_ROOT>,
+                <&clk IMX8MP_CLK_HSIO_AXI>;
+       clock-names = "pcie", "pcie_aux", "pcie_bus";
+       assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+       assigned-clock-rates = <10000000>;
+       assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+       vpcie-supply = <&reg_pcie0>;
+       status = "okay";
+};
+
 &snvs_pwrkey {
        status = "okay";
 };
@@ -502,6 +542,19 @@
                >;
        };
 
+       pinctrl_pcie0: pcie0grp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B    0x61 /* open drain, pull up */
+                       MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07      0x41
+               >;
+       };
+
+       pinctrl_pcie0_reg: pcie0reggrp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06      0x41
+               >;
+       };
+
        pinctrl_pmic: pmicgrp {
                fsl,pins = <
                        MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03     0x000001c0