toplevel_check $srcfile
-tool_run "aclocal" "-I m4 -I common/m4 $ACLOCAL_FLAGS"
+tool_run "aclocal" "-I common/m4 $ACLOCAL_FLAGS"
# FIXME : why does libtoolize keep complaining about aclocal ?
-Subproject commit f1ddfc229b82ca75ab21707a0c52a0bcdb21d5d8
+Subproject commit 42efc7fe3eda3ea184fa620f2e0dbc4977f16c26
dnl Add parameters for aclocal
dnl (This must come after AM_INIT_AUTOMAKE, since it modifies ACLOCAL)
-ACLOCAL="cat m4/*.m4 >acinclude.m4;$ACLOCAL $ACLOCAL_FLAGS"
+ACLOCAL="$ACLOCAL -I common/m4 $ACLOCAL_FLAGS"
AM_MAINTAINER_MODE
AC_OUTPUT(
Makefile
include/Makefile
-m4/Makefile
gst/Makefile
gst/gstversion.h
gst/types/Makefile
+++ /dev/null
-EXTRA_DIST = \
- glib.m4 \
- gst-feature.m4 \
- gtk.m4 \
- README
+++ /dev/null
-All aclocal .m4 files we need are put here and cat'd to acinclude.m4 in
-the source root. Official ones (taken from the relevant devel packages)
-are named as-is, unofficial ones (or changed ones) get a gst-prefix.
+++ /dev/null
-# Configure paths for GLIB
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
-dnl gthread is specified in MODULES, pass to glib-config
-dnl
-AC_DEFUN(AM_PATH_GLIB,
-[dnl
-dnl Get the cflags and libraries from the glib-config script
-dnl
-AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
- glib_config_prefix="$withval", glib_config_prefix="")
-AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
- glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
- , enable_glibtest=yes)
-
- if test x$glib_config_exec_prefix != x ; then
- glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
- if test x${GLIB_CONFIG+set} != xset ; then
- GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
- fi
- fi
- if test x$glib_config_prefix != x ; then
- glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
- if test x${GLIB_CONFIG+set} != xset ; then
- GLIB_CONFIG=$glib_config_prefix/bin/glib-config
- fi
- fi
-
- for module in . $4
- do
- case "$module" in
- gmodule)
- glib_config_args="$glib_config_args gmodule"
- ;;
- gthread)
- glib_config_args="$glib_config_args gthread"
- ;;
- esac
- done
-
- AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
- min_glib_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
- no_glib=""
- if test "$GLIB_CONFIG" = "no" ; then
- no_glib=yes
- else
- GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
- GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
- glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_glibtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GLIB_CFLAGS"
- LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of glib-config to some extent
-dnl
- rm -f conf.glibtest
- AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.glibtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = g_strdup("$min_glib_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_glib_version");
- exit(1);
- }
-
- if ((glib_major_version != $glib_config_major_version) ||
- (glib_minor_version != $glib_config_minor_version) ||
- (glib_micro_version != $glib_config_micro_version))
- {
- printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
- $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
- glib_major_version, glib_minor_version, glib_micro_version);
- printf ("*** was found! If glib-config was correct, then it is best\n");
- printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
- printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
- else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
- (glib_minor_version != GLIB_MINOR_VERSION) ||
- (glib_micro_version != GLIB_MICRO_VERSION))
- {
- printf("*** GLIB header files (version %d.%d.%d) do not match\n",
- GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
- printf("*** library (version %d.%d.%d)\n",
- glib_major_version, glib_minor_version, glib_micro_version);
- }
- else
- {
- if ((glib_major_version > major) ||
- ((glib_major_version == major) && (glib_minor_version > minor)) ||
- ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
- glib_major_version, glib_minor_version, glib_micro_version);
- printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
- printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the glib-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
- printf("*** correct copy of glib-config. (In this case, you will have to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- }
- return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_glib" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GLIB_CONFIG" = "no" ; then
- echo "*** The glib-config script installed by GLIB could not be found"
- echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GLIB_CONFIG environment variable to the"
- echo "*** full path to glib-config."
- else
- if test -f conf.glibtest ; then
- :
- else
- echo "*** Could not run GLIB test program, checking why..."
- CFLAGS="$CFLAGS $GLIB_CFLAGS"
- LIBS="$LIBS $GLIB_LIBS"
- AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GLIB or finding the wrong"
- echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
- echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
- echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GLIB_CFLAGS=""
- GLIB_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GLIB_CFLAGS)
- AC_SUBST(GLIB_LIBS)
- rm -f conf.glibtest
-])
+++ /dev/null
-dnl Perform a check for a feature for GStreamer
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Thomas Vander Stichele <thomas@apestaart.org> added useful stuff
-dnl Last modification: 25/06/2001
-dnl GST_CHECK_FEATURE(FEATURE-NAME, FEATURE-DESCRIPTION,
-dnl DEPENDENT-PLUGINS, TEST-FOR-FEATURE,
-dnl DISABLE-BY-DEFAULT, ACTION-IF-USE, ACTION-IF-NOTUSE)
-dnl
-dnl This macro adds a command line argument to enable the user to enable
-dnl or disable a feature, and if the feature is enabled, performs a supplied
-dnl test to check if the feature is available.
-dnl
-dnl The test should define HAVE_<FEATURE-NAME> to "yes" or "no" depending
-dnl on whether the feature is available.
-dnl
-dnl The macro will set USE_<FEATURE-NAME> to "yes" or "no" depending on
-dnl whether the feature is to be used.
-dnl Thomas changed this, so that when USE_<FEATURE-NAME> was already set
-dnl to no, then it stays that way.
-dnl
-dnl The macro will call AM_CONDITIONAL(USE_<<FEATURE-NAME>, ...) to allow
-dnl the feature to control what is built in Makefile.ams. If you want
-dnl additional actions resulting from the test, you can add them with the
-dnl ACTION-IF-USE and ACTION-IF-NOTUSE parameters.
-dnl
-dnl FEATURE-NAME is the name of the feature, and should be in
-dnl purely upper case characters.
-dnl FEATURE-DESCRIPTION is used to describe the feature in help text for
-dnl the command line argument.
-dnl DEPENDENT-PLUGINS lists any plugins which depend on this feature.
-dnl TEST-FOR-FEATURE is a test which sets HAVE_<FEATURE-NAME> to "yes"
-dnl or "no" depending on whether the feature is
-dnl available.
-dnl DISABLE-BY-DEFAULT if "disabled", the feature is disabled by default,
-dnl if any other value, the feature is enabled by default.
-dnl ACTION-IF-USE any extra actions to perform if the feature is to be
-dnl used.
-dnl ACTION-IF-NOTUSE any extra actions to perform if the feature is not to
-dnl be used.
-dnl
-dnl
-dnl thomas :
-dnl we also added a history.
-dnl GST_PLUGINS_YES will contain all plugins to be built
-dnl that were checked through GST_CHECK_FEATURE
-dnl GST_PLUGINS_NO will contain those that won't be built
-
-AC_DEFUN(GST_CHECK_FEATURE,
-[dnl
-builtin(define, [gst_endisable], ifelse($5, [disabled], [enable], [disable]))dnl
-dnl if it is set to NO, then don't even consider it for building
-NOUSE=
-if test "x$USE_[$1]" = "xno"; then
- NOUSE="yes"
-fi
-AC_ARG_ENABLE(translit([$1], A-Z, a-z),
- [ ]builtin(format, --%-26s gst_endisable %s, gst_endisable-translit([$1], A-Z, a-z), [$2]ifelse([$3],,,: [$3])),
- [ case "${enableval}" in
- yes) USE_[$1]=yes;;
- no) USE_[$1]=no;;
- *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;;
- esac],
- [ USE_$1=]ifelse($5, [disabled], [no], [yes])) dnl DEFAULT
-
-dnl *** set it back to no if it was preset to no
-if test "x$NOUSE" = "xyes"; then
- USE_[$1]="no"
- AC_MSG_WARN(*** $3 pre-configured not to be built)
-fi
-NOUSE=
-
-dnl *** If it's enabled
-
-if test x$USE_[$1] = xyes; then
- gst_check_save_LIBS=$LIBS
- gst_check_save_LDFLAGS=$LDFLAGS
- gst_check_save_CFLAGS=$CFLAGS
- gst_check_save_CPPFLAGS=$CPPFLAGS
- gst_check_save_CXXFLAGS=$CXXFLAGS
- HAVE_[$1]=no
- $4
- LIBS=$gst_check_save_LIBS
- LDFLAGS=$gst_check_save_LDFLAGS
- CFLAGS=$gst_check_save_CFLAGS
- CPPFLAGS=$gst_check_save_CPPFLAGS
- CXXFLAGS=$gst_check_save_CXXFLAGS
-
- dnl If it isn't found, unset USE_[$1]
- if test x$HAVE_[$1] = xno; then
- USE_[$1]=no
- fi
-fi
-dnl *** Warn if it's disabled or not found
-if test x$USE_[$1] = xyes; then
- ifelse([$6], , :, [$6])
- GST_PLUGINS_YES="$GST_PLUGINS_YES \n\t[$3]"
-else
- ifelse([$3], , :, [AC_MSG_NOTICE(
-These plugins will not be built: [$3]
-)])
- GST_PLUGINS_NO="$GST_PLUGINS_NO \n\t[$3]"
- ifelse([$7], , :, [$7])
-fi
-dnl *** Define the conditional as appropriate
-AM_CONDITIONAL(USE_[$1], test x$USE_[$1] = xyes)
-])
-
-dnl Use a -config program which accepts --cflags and --libs parameters
-dnl to set *_CFLAGS and *_LIBS and check existence of a feature.
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Last modification: 26/06/2001
-dnl GST_CHECK_CONFIGPROG(FEATURE-NAME, CONFIG-PROG-FILENAME, MODULES)
-dnl
-dnl This check was written for GStreamer: it should be renamed and checked
-dnl for portability if you decide to use it elsewhere.
-dnl
-AC_DEFUN(GST_CHECK_CONFIGPROG,
-[
- AC_PATH_PROG([$1]_CONFIG, [$2], no)
- if test x$[$1]_CONFIG = xno; then
- [$1]_LIBS=
- [$1]_CFLAGS=
- HAVE_[$1]=no
- else
- [$1]_LIBS=`[$2] --libs [$3]`
- [$1]_CFLAGS=`[$2] --cflags [$3]`
- HAVE_[$1]=yes
- fi
- AC_SUBST([$1]_LIBS)
- AC_SUBST([$1]_CFLAGS)
-])
-
-dnl Use AC_CHECK_LIB and AC_CHECK_HEADER to do both tests at once
-dnl sets HAVE_module if we have it
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Last modification: 26/06/2001
-dnl GST_CHECK_LIBHEADER(FEATURE-NAME, LIB NAME, LIB FUNCTION, EXTRA LD FLAGS,
-dnl HEADER NAME, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND)
-dnl
-dnl This check was written for GStreamer: it should be renamed and checked
-dnl for portability if you decide to use it elsewhere.
-dnl
-AC_DEFUN(GST_CHECK_LIBHEADER,
-[
- AC_CHECK_LIB([$2], [$3], HAVE_[$1]=yes, HAVE_[$1]=no,[$4])
- if test "x$HAVE_[$1]" = "xyes"; then
- AC_CHECK_HEADER([$5], :, HAVE_[$1]=no)
- if test "x$HAVE_[$1]" = "xyes"; then
- dnl execute what needs to be
- ifelse([$6], , :, [$6])
- else
- ifelse([$7], , :, [$7])
- fi
- else
- AC_MSG_WARN([$1] not found)
- fi
- AC_SUBST(HAVE_[$1])
-]
-)
-
-dnl
-dnl Add a subsystem --disable flag and all the necessary symbols and substitions
-dnl
-dnl GST_SUBSYSTEM_DISABLE(SYSNAME, [subsystem name])
-dnl
-AC_DEFUN(GST_SUBSYSTEM_DISABLE,
-[AC_ARG_ENABLE(translit([$1], A-Z, a-z),
-[ ]builtin(format, --disable-%-17s disable %s, translit([$1], A-Z, a-z), $2),
-[ case "${enableval}" in
- yes) GST_DISABLE_[$1]=no ;;
- no) GST_DISABLE_[$1]=yes ;;
- *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;;
- esac],
-[GST_DISABLE_[$1]=no]) dnl Default value
-if test x$GST_DISABLE_[$1] = xyes; then
- AC_DEFINE(GST_DISABLE_[$1], 1, [Disable $2])
- GST_DISABLE_[$1]_DEFINE=-DGST_DISABLE_[$1]
-fi
-AM_CONDITIONAL(GST_DISABLE_[$1], test x$GST_DISABLE_[$1] = xyes)
-AC_SUBST(GST_DISABLE_[$1]_DEFINE)
-GST_SUBSYSTEM_DISABLE_DEFINES="$GST_SUBSYTEM_DISABLE_DEFINES $GST_DISABLE_[$1]_DEFINE"
-])
+++ /dev/null
-# Configure paths for GTK+
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
-dnl
-AC_DEFUN(AM_PATH_GTK,
-[dnl
-dnl Get the cflags and libraries from the gtk-config script
-dnl
-AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
- gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
- gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
- , enable_gtktest=yes)
-
- for module in . $4
- do
- case "$module" in
- gthread)
- gtk_config_args="$gtk_config_args gthread"
- ;;
- esac
- done
-
- if test x$gtk_config_exec_prefix != x ; then
- gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
- fi
- fi
- if test x$gtk_config_prefix != x ; then
- gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
- fi
- fi
-
- AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
- min_gtk_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
- no_gtk=""
- if test "$GTK_CONFIG" = "no" ; then
- no_gtk=yes
- else
- GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_gtktest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
-dnl
- rm -f conf.gtktest
- AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.gtktest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = g_strdup("$min_gtk_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_gtk_version");
- exit(1);
- }
-
- if ((gtk_major_version != $gtk_config_major_version) ||
- (gtk_minor_version != $gtk_config_minor_version) ||
- (gtk_micro_version != $gtk_config_micro_version))
- {
- printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
- $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config was correct, then it is best\n");
- printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
- printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
- else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
- (gtk_minor_version != GTK_MINOR_VERSION) ||
- (gtk_micro_version != GTK_MICRO_VERSION))
- {
- printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
- GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
- printf("*** library (version %d.%d.%d)\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
- else
- {
- if ((gtk_major_version > major) ||
- ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
- ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
- printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
- printf("*** correct copy of gtk-config. (In this case, you will have to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- }
- return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_gtk" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GTK_CONFIG" = "no" ; then
- echo "*** The gtk-config script installed by GTK could not be found"
- echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG environment variable to the"
- echo "*** full path to gtk-config."
- else
- if test -f conf.gtktest ; then
- :
- else
- echo "*** Could not run GTK test program, checking why..."
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$LIBS $GTK_LIBS"
- AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GTK or finding the wrong"
- echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK was incorrectly installed"
- echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GTK_CFLAGS=""
- GTK_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GTK_CFLAGS)
- AC_SUBST(GTK_LIBS)
- rm -f conf.gtktest
-])
+++ /dev/null
-
-dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
-dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
-dnl also defines GSTUFF_PKG_ERRORS on error
-AC_DEFUN(PKG_CHECK_MODULES, [
- succeeded=no
-
- if test -z "$PKG_CONFIG"; then
- AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
- fi
-
- if test "$PKG_CONFIG" = "no" ; then
- echo "*** The pkg-config script could not be found. Make sure it is"
- echo "*** in your path, or set the PKG_CONFIG environment variable"
- echo "*** to the full path to pkg-config."
- echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
- else
- if ! $PKG_CONFIG --atleast-pkgconfig-version 0.7.0; then
- echo "*** Your version of pkg-config is too old. You need version 0.7.0 or newer."
- echo "*** See http://www.freedesktop.org/software/pkgconfig"
- else
- AC_MSG_CHECKING(for $2)
-
- if $PKG_CONFIG --exists "$2" ; then
- AC_MSG_RESULT(yes)
- succeeded=yes
-
- AC_MSG_CHECKING($1_CFLAGS)
- $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
- AC_MSG_RESULT($$1_CFLAGS)
-
- AC_MSG_CHECKING($1_LIBS)
- $1_LIBS=`$PKG_CONFIG --libs "$2"`
- AC_MSG_RESULT($$1_LIBS)
- else
- $1_CFLAGS=""
- $1_LIBS=""
- ## If we have a custom action on failure, don't print errors, but
- ## do set a variable so people can do so.
- $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
- ifelse([$4], ,echo $$1_PKG_ERRORS,)
- fi
-
- AC_SUBST($1_CFLAGS)
- AC_SUBST($1_LIBS)
- fi
- fi
-
- if test $succeeded = yes; then
- ifelse([$3], , :, [$3])
- else
- ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
- fi
-])
-
-
projects / platform / upstream / gstreamer.git / commitdiff