armada-8040-mcbin.dtb \
armada-xp-crs305-1g-4s.dtb \
armada-xp-crs305-1g-4s-bit.dtb \
+ armada-xp-crs326-24g-2s.dtb \
+ armada-xp-crs326-24g-2s-bit.dtb \
armada-xp-db-xc3-24g4xg.dtb \
armada-xp-gp.dtb \
armada-xp-maxbcm.dtb \
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+ model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x001f0000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x001f0000 0x00010000>;
+ label = "u-boot-env";
+ };
+ partition@ubi1 {
+ reg = <0x00200000 0x03f00000>;
+ label = "ubi1";
+ };
+ partition@ubi2 {
+ reg = <0x04100000 0x03f00000>;
+ label = "ubi2";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+ u-boot,dm-pre-reloc;
+
+ spi-flash@0 {
+ u-boot,dm-pre-reloc;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+ model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs326-24g-2s-u-boot.dtsi"
+
+/ {
+ model = "CRS326-24G-2S+";
+ compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+ };
+};
+
+&L2 {
+ arm,parity-enable;
+ marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x001f0000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x001f0000 0x00010000>;
+ label = "u-boot-env";
+ };
+ partition@ubi1 {
+ reg = <0x00200000 0x00e00000>;
+ label = "ubi1";
+ };
+ };
+};
F: configs/crs305-1g-4s-bit_defconfig
F: arch/arm/dts/armada-xp-crs305-1g-4s.dts
F: arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts
+
+CRS326-24G-2S BOARD
+M: Luka Kovacic <luka.kovacic@sartura.hr>
+M: Luka Perkov <luka.perkov@sartura.hr>
+S: Maintained
+F: configs/crs326-24g-2s_defconfig
+F: configs/crs326-24g-2s-bit_defconfig
+F: arch/arm/dts/armada-xp-crs326-24g-2s.dts
+F: arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_CRS3XX_98DX3236=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x1F0000
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+# CONFIG_EFI_LOADER is not set
+CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
+CONFIG_AUTOBOOT_STOP_STR="s"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_I2C is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_BLK=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+# CONFIG_DM_I2C is not set
+# CONFIG_SYS_I2C_MVTWSI is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FIT=y
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_CRS3XX_98DX3236=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x1F0000
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+# CONFIG_EFI_LOADER is not set
+CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
+CONFIG_AUTOBOOT_STOP_STR="s"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_I2C is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_BLK=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+# CONFIG_DM_I2C is not set
+# CONFIG_SYS_I2C_MVTWSI is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FIT=y
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
projects / platform / kernel / u-boot.git / commitdiff