/**
* struct ks8851_net - KS8851 driver private data
* @netdev: The network device we're bound to
- * @spidev: The spi device we're bound to.
- * @lock: Lock to ensure that the device is not accessed when busy.
* @statelock: Lock on this structure for tx list.
* @mii: The MII state information for the mii calls.
* @rxctrl: RX settings for @rxctrl_work.
- * @tx_work: Work queue for tx packets
* @rxctrl_work: Work queue for updating RX mode and multicast lists
* @txq: Queue of packets for transmission.
- * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
- * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
* @txh: Space for generating packet TX header in DMA-able data
* @rxd: Space for receiving SPI data, in DMA-able space.
* @txd: Space for transmitting SPI data, in DMA-able space.
* @vdd_io: Optional digital power supply for IO
* @gpio: Optional reset_n gpio
*
- * The @lock ensures that the chip is protected when certain operations are
- * in progress. When the read or write packet transfer is in progress, most
- * of the chip registers are not ccessible until the transfer is finished and
- * the DMA has been de-asserted.
- *
* The @statelock is used to protect information in the structure which may
* need to be accessed via several sources, such as the network driver layer
* or one of the work queues.
*/
struct ks8851_net {
struct net_device *netdev;
- struct spi_device *spidev;
- struct mutex lock;
spinlock_t statelock;
union ks8851_tx_hdr txh ____cacheline_aligned;
struct mii_if_info mii;
struct ks8851_rxctrl rxctrl;
- struct work_struct tx_work;
struct work_struct rxctrl_work;
struct sk_buff_head txq;
- struct spi_message spi_msg1;
- struct spi_message spi_msg2;
- struct spi_transfer spi_xfer1;
- struct spi_transfer spi_xfer2[2];
-
struct eeprom_93cx6 eeprom;
struct regulator *vdd_reg;
struct regulator *vdd_io;
int gpio;
};
+/**
+ * struct ks8851_net_spi - KS8851 SPI driver private data
+ * @ks8851: KS8851 driver common private data
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @tx_work: Work queue for tx packets
+ * @spidev: The spi device we're bound to.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ */
+struct ks8851_net_spi {
+ struct ks8851_net ks8851;
+ struct mutex lock;
+ struct work_struct tx_work;
+ struct spi_device *spidev;
+ struct spi_message spi_msg1;
+ struct spi_message spi_msg2;
+ struct spi_transfer spi_xfer1;
+ struct spi_transfer spi_xfer2[2];
+};
+
+#define to_ks8851_spi(ks) container_of((ks), struct ks8851_net_spi, ks8851)
+
static int msg_enable;
/* SPI frame opcodes */
*/
static void ks8851_lock(struct ks8851_net *ks, unsigned long *flags)
{
- mutex_lock(&ks->lock);
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+
+ mutex_lock(&kss->lock);
}
/**
*/
static void ks8851_unlock(struct ks8851_net *ks, unsigned long *flags)
{
- mutex_unlock(&ks->lock);
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+
+ mutex_unlock(&kss->lock);
}
/* SPI register read/write calls.
*/
static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
{
- struct spi_transfer *xfer = &ks->spi_xfer1;
- struct spi_message *msg = &ks->spi_msg1;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = &kss->spi_xfer1;
+ struct spi_message *msg = &kss->spi_msg1;
__le16 txb[2];
int ret;
xfer->rx_buf = NULL;
xfer->len = 4;
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "spi_sync() failed\n");
}
static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
u8 *rxb, unsigned rxl)
{
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
struct spi_transfer *xfer;
struct spi_message *msg;
__le16 *txb = (__le16 *)ks->txd;
txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
- if (ks->spidev->master->flags & SPI_MASTER_HALF_DUPLEX) {
- msg = &ks->spi_msg2;
- xfer = ks->spi_xfer2;
+ if (kss->spidev->master->flags & SPI_MASTER_HALF_DUPLEX) {
+ msg = &kss->spi_msg2;
+ xfer = kss->spi_xfer2;
xfer->tx_buf = txb;
xfer->rx_buf = NULL;
xfer->rx_buf = trx;
xfer->len = rxl;
} else {
- msg = &ks->spi_msg1;
- xfer = &ks->spi_xfer1;
+ msg = &kss->spi_msg1;
+ xfer = &kss->spi_xfer1;
xfer->tx_buf = txb;
xfer->rx_buf = trx;
xfer->len = rxl + 2;
}
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "read: spi_sync() failed\n");
- else if (ks->spidev->master->flags & SPI_MASTER_HALF_DUPLEX)
+ else if (kss->spidev->master->flags & SPI_MASTER_HALF_DUPLEX)
memcpy(rxb, trx, rxl);
else
memcpy(rxb, trx + 2, rxl);
*/
static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
{
- struct spi_transfer *xfer = ks->spi_xfer2;
- struct spi_message *msg = &ks->spi_msg2;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = kss->spi_xfer2;
+ struct spi_message *msg = &kss->spi_msg2;
u8 txb[1];
int ret;
xfer->tx_buf = NULL;
xfer->len = len;
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__);
}
*/
static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
{
- struct spi_transfer *xfer = ks->spi_xfer2;
- struct spi_message *msg = &ks->spi_msg2;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = kss->spi_xfer2;
+ struct spi_message *msg = &kss->spi_msg2;
unsigned fid = 0;
int ret;
xfer->rx_buf = NULL;
xfer->len = ALIGN(txp->len, 4);
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__);
}
*/
static void ks8851_tx_work(struct work_struct *work)
{
- struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+ struct ks8851_net_spi *kss;
+ struct ks8851_net *ks;
unsigned long flags;
struct sk_buff *txb;
- bool last = skb_queue_empty(&ks->txq);
+ bool last;
+
+ kss = container_of(work, struct ks8851_net_spi, tx_work);
+ ks = &kss->ks8851;
+ last = skb_queue_empty(&ks->txq);
ks8851_lock(ks, &flags);
static int ks8851_net_stop(struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
+ struct ks8851_net_spi *kss;
unsigned long flags;
+ kss = to_ks8851_spi(ks);
+
netif_info(ks, ifdown, dev, "shutting down\n");
netif_stop_queue(dev);
ks8851_unlock(ks, &flags);
/* stop any outstanding work */
- flush_work(&ks->tx_work);
+ flush_work(&kss->tx_work);
flush_work(&ks->rxctrl_work);
ks8851_lock(ks, &flags);
struct ks8851_net *ks = netdev_priv(dev);
unsigned needed = calc_txlen(skb->len);
netdev_tx_t ret = NETDEV_TX_OK;
+ struct ks8851_net_spi *kss;
+
+ kss = to_ks8851_spi(ks);
netif_dbg(ks, tx_queued, ks->netdev,
"%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
}
spin_unlock(&ks->statelock);
- schedule_work(&ks->tx_work);
+ schedule_work(&kss->tx_work);
return ret;
}
static int ks8851_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
+ struct ks8851_net_spi *kss;
struct net_device *netdev;
struct ks8851_net *ks;
int ret;
unsigned cider;
int gpio;
- netdev = devm_alloc_etherdev(dev, sizeof(struct ks8851_net));
+ netdev = devm_alloc_etherdev(dev, sizeof(struct ks8851_net_spi));
if (!netdev)
return -ENOMEM;
spi->bits_per_word = 8;
ks = netdev_priv(netdev);
+ kss = to_ks8851_spi(ks);
ks->netdev = netdev;
- ks->spidev = spi;
+ kss->spidev = spi;
ks->tx_space = 6144;
gpio = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0, NULL);
gpio_set_value(gpio, 1);
}
- mutex_init(&ks->lock);
+ mutex_init(&kss->lock);
spin_lock_init(&ks->statelock);
- INIT_WORK(&ks->tx_work, ks8851_tx_work);
+ INIT_WORK(&kss->tx_work, ks8851_tx_work);
INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
/* initialise pre-made spi transfer messages */
- spi_message_init(&ks->spi_msg1);
- spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+ spi_message_init(&kss->spi_msg1);
+ spi_message_add_tail(&kss->spi_xfer1, &kss->spi_msg1);
- spi_message_init(&ks->spi_msg2);
- spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
- spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+ spi_message_init(&kss->spi_msg2);
+ spi_message_add_tail(&kss->spi_xfer2[0], &kss->spi_msg2);
+ spi_message_add_tail(&kss->spi_xfer2[1], &kss->spi_msg2);
/* setup EEPROM state */
projects / platform / kernel / linux-rpi.git / commitdiff