usb: musb: Start using struct usb_otg

Use struct usb_otg members with OTG specific functions instead
of usb_phy members.

[ balbi@ti.com: added a missing change on musb_gadget.c to avoid
	a compile error on a later patch ]

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index e233d2b..cb942b6 100644 (file)
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -226,6 +226,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
        struct device *dev = musb->controller;
        struct musb_hdrc_platform_data *plat = dev->platform_data;
        struct omap_musb_board_data *data = plat->board_data;
+       struct usb_otg *otg = musb->xceiv->otg;
        unsigned long flags;
        irqreturn_t ret = IRQ_NONE;
        u32 epintr, usbintr;
@@ -289,14 +290,14 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
                        WARNING("VBUS error workaround (delay coming)\n");
                } else if (is_host_enabled(musb) && drvvbus) {
                        MUSB_HST_MODE(musb);
-                       musb->xceiv->default_a = 1;
+                       otg->default_a = 1;
                        musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                        portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                        del_timer(&otg_workaround);
                } else {
                        musb->is_active = 0;
                        MUSB_DEV_MODE(musb);
-                       musb->xceiv->default_a = 0;
+                       otg->default_a = 0;
                        musb->xceiv->state = OTG_STATE_B_IDLE;
                        portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                }

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 2613bfd..f0cb776 100644 (file)
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -294,6 +294,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 {
        struct musb             *musb = hci;
        void __iomem            *reg_base = musb->ctrl_base;
+       struct usb_otg          *otg = musb->xceiv->otg;
        unsigned long           flags;
        irqreturn_t             ret = IRQ_NONE;
        u32                     status;
@@ -351,14 +352,14 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
                        WARNING("VBUS error workaround (delay coming)\n");
                } else if (is_host_enabled(musb) && drvvbus) {
                        MUSB_HST_MODE(musb);
-                       musb->xceiv->default_a = 1;
+                       otg->default_a = 1;
                        musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                        portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                        del_timer(&otg_workaround);
                } else {
                        musb->is_active = 0;
                        MUSB_DEV_MODE(musb);
-                       musb->xceiv->default_a = 0;
+                       otg->default_a = 0;
                        musb->xceiv->state = OTG_STATE_B_IDLE;
                        portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                }

diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 7c569f5..f2a63dd 100644 (file)
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -265,6 +265,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
        unsigned long   flags;
        irqreturn_t     retval = IRQ_NONE;
        struct musb     *musb = __hci;
+       struct usb_otg  *otg = musb->xceiv->otg;
        void __iomem    *tibase = musb->ctrl_base;
        struct cppi     *cppi;
        u32             tmp;
@@ -331,14 +332,14 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
                        WARNING("VBUS error workaround (delay coming)\n");
                } else if (is_host_enabled(musb) && drvvbus) {
                        MUSB_HST_MODE(musb);
-                       musb->xceiv->default_a = 1;
+                       otg->default_a = 1;
                        musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                        portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                        del_timer(&otg_workaround);
                } else {
                        musb->is_active = 0;
                        MUSB_DEV_MODE(musb);
-                       musb->xceiv->default_a = 0;
+                       otg->default_a = 0;
                        musb->xceiv->state = OTG_STATE_B_IDLE;
                        portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                }
@@ -464,7 +465,7 @@ static int davinci_musb_exit(struct musb *musb)
        davinci_musb_source_power(musb, 0 /*off*/, 1);
 
        /* delay, to avoid problems with module reload */
-       if (is_host_enabled(musb) && musb->xceiv->default_a) {
+       if (is_host_enabled(musb) && musb->xceiv->otg->default_a) {
                int     maxdelay = 30;
                u8      devctl, warn = 0;
 

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 7b7ecf6..f9ecd5e 100644 (file)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -414,6 +414,7 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                u8 devctl, u8 power)
 {
+       struct usb_otg *otg = musb->xceiv->otg;
        irqreturn_t handled = IRQ_NONE;
 
        dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
@@ -626,7 +627,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                case OTG_STATE_B_PERIPHERAL:
                        musb_g_suspend(musb);
                        musb->is_active = is_otg_enabled(musb)
-                                       && musb->xceiv->gadget->b_hnp_enable;
+                                       && otg->gadget->b_hnp_enable;
                        if (musb->is_active) {
                                musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
                                dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -643,7 +644,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                case OTG_STATE_A_HOST:
                        musb->xceiv->state = OTG_STATE_A_SUSPEND;
                        musb->is_active = is_otg_enabled(musb)
-                                       && musb->xceiv->host->b_hnp_enable;
+                                       && otg->host->b_hnp_enable;
                        break;
                case OTG_STATE_B_HOST:
                        /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1965,7 +1966,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
                if (is_otg_enabled(musb))
                        hcd->self.otg_port = 1;
-               musb->xceiv->host = &hcd->self;
+               musb->xceiv->otg->host = &hcd->self;
                hcd->power_budget = 2 * (plat->power ? : 250);
 
                /* program PHY to use external vBus if required */
@@ -1984,7 +1985,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
                struct usb_hcd  *hcd = musb_to_hcd(musb);
 
                MUSB_HST_MODE(musb);
-               musb->xceiv->default_a = 1;
+               musb->xceiv->otg->default_a = 1;
                musb->xceiv->state = OTG_STATE_A_IDLE;
 
                status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
@@ -1999,7 +2000,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
        } else /* peripheral is enabled */ {
                MUSB_DEV_MODE(musb);
-               musb->xceiv->default_a = 0;
+               musb->xceiv->otg->default_a = 0;
                musb->xceiv->state = OTG_STATE_B_IDLE;
 
                status = musb_gadget_setup(musb);

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ac3d2ee..0524a34 100644 (file)
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1898,6 +1898,7 @@ static int musb_gadget_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver)
 {
        struct musb             *musb = gadget_to_musb(g);
+       struct usb_otg          *otg = musb->xceiv->otg;
        unsigned long           flags;
        int                     retval = -EINVAL;
 
@@ -1945,7 +1946,7 @@ static int musb_gadget_start(struct usb_gadget *g,
                }
 
                if ((musb->xceiv->last_event == USB_EVENT_ID)
-                                       && musb->xceiv->set_vbus)
+                                       && otg->set_vbus)
                        otg_set_vbus(musb->xceiv, 1);
 
                hcd->self.uses_pio_for_control = 1;

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index e9f80ad..22ec3e3 100644 (file)
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -47,6 +47,7 @@
 
 static void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
+       struct usb_otg  *otg = musb->xceiv->otg;
        u8              power;
        void __iomem    *mbase = musb->mregs;
 
@@ -81,7 +82,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
                case OTG_STATE_A_HOST:
                        musb->xceiv->state = OTG_STATE_A_SUSPEND;
                        musb->is_active = is_otg_enabled(musb)
-                                       && musb->xceiv->host->b_hnp_enable;
+                                       && otg->host->b_hnp_enable;
                        if (musb->is_active)
                                mod_timer(&musb->otg_timer, jiffies
                                        + msecs_to_jiffies(
@@ -91,7 +92,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
                case OTG_STATE_B_HOST:
                        musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
                        musb->is_active = is_otg_enabled(musb)
-                                       && musb->xceiv->host->b_hnp_enable;
+                                       && otg->host->b_hnp_enable;
                        musb_platform_try_idle(musb, 0);
                        break;
                default:
@@ -179,6 +180,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 void musb_root_disconnect(struct musb *musb)
 {
+       struct usb_otg  *otg = musb->xceiv->otg;
+
        musb->port1_status = USB_PORT_STAT_POWER
                        | (USB_PORT_STAT_C_CONNECTION << 16);
 
@@ -188,7 +191,7 @@ void musb_root_disconnect(struct musb *musb)
        switch (musb->xceiv->state) {
        case OTG_STATE_A_SUSPEND:
                if (is_otg_enabled(musb)
-                               && musb->xceiv->host->b_hnp_enable) {
+                               && otg->host->b_hnp_enable) {
                        musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
                        musb->g.is_a_peripheral = 1;
                        break;

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index df719ea..a427fcb 100644 (file)
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -132,6 +132,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 
 static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
+       struct usb_otg  *otg = musb->xceiv->otg;
        u8              devctl;
        unsigned long timeout = jiffies + msecs_to_jiffies(1000);
        int ret = 1;
@@ -167,7 +168,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
                                otg_set_vbus(musb->xceiv, 1);
                } else {
                        musb->is_active = 1;
-                       musb->xceiv->default_a = 1;
+                       otg->default_a = 1;
                        musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                        devctl |= MUSB_DEVCTL_SESSION;
                        MUSB_HST_MODE(musb);
@@ -179,7 +180,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
                 * jumping right to B_IDLE...
                 */
 
-               musb->xceiv->default_a = 0;
+               otg->default_a = 0;
                musb->xceiv->state = OTG_STATE_B_IDLE;
                devctl &= ~MUSB_DEVCTL_SESSION;
 

diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 5ce01bd..0665c14 100644 (file)
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -293,7 +293,7 @@ static int tusb_draw_power(struct usb_phy *x, unsigned mA)
         * The actual current usage would be very board-specific.  For now,
         * it's simpler to just use an aggregate (also board-specific).
         */
-       if (x->default_a || mA < (musb->min_power << 1))
+       if (x->otg->default_a || mA < (musb->min_power << 1))
                mA = 0;
 
        reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
@@ -510,6 +510,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
        void __iomem    *tbase = musb->ctrl_base;
        u32             conf, prcm, timer;
        u8              devctl;
+       struct usb_otg  *otg = musb->xceiv->otg;
 
        /* HDRC controls CPEN, but beware current surges during device
         * connect.  They can trigger transient overcurrent conditions
@@ -522,7 +523,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 
        if (is_on) {
                timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
-               musb->xceiv->default_a = 1;
+               otg->default_a = 1;
                musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                devctl |= MUSB_DEVCTL_SESSION;
 
@@ -548,11 +549,11 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
                                musb->xceiv->state = OTG_STATE_A_IDLE;
                        }
                        musb->is_active = 0;
-                       musb->xceiv->default_a = 1;
+                       otg->default_a = 1;
                        MUSB_HST_MODE(musb);
                } else {
                        musb->is_active = 0;
-                       musb->xceiv->default_a = 0;
+                       otg->default_a = 0;
                        musb->xceiv->state = OTG_STATE_B_IDLE;
                        MUSB_DEV_MODE(musb);
                }
@@ -644,6 +645,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 {
        u32             otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
        unsigned long   idle_timeout = 0;
+       struct usb_otg  *otg = musb->xceiv->otg;
 
        /* ID pin */
        if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
@@ -654,7 +656,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
                else
                        default_a = is_host_enabled(musb);
                dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B');
-               musb->xceiv->default_a = default_a;
+               otg->default_a = default_a;
                tusb_musb_set_vbus(musb, default_a);
 
                /* Don't allow idling immediately */
@@ -666,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
        if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
 
                /* B-dev state machine:  no vbus ~= disconnect */
-               if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
+               if ((is_otg_enabled(musb) && !otg->default_a)
                                || !is_host_enabled(musb)) {
                        /* ? musb_root_disconnect(musb); */
                        musb->port1_status &=