MIPS: SEAD-3: Fix GIC interrupt specifiers

The various interrupt specifiers in the device tree are not in a valid
format for the MIPS GIC interrupt controller binding. Where each
interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the
pin number & the type of interrupt - the device tree was only providing
the pin number. This causes interrupts for those devices to not be used
when a GIC is present. SEAD-3 systems without a GIC are unaffected since
the DT fixup code generates interrupt specifiers that are valid for the
CPU interrupt controller.

Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each
interrupt specifier.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c11e3b48dbc3 ("MIPS: SEAD3: Probe UARTs using DT")
Fixes: a34e93882de4 ("MIPS: SEAD3: Probe ethernet controller using DT")
Fixes: 7afd2a5aec2e ("MIPS: SEAD3: Probe EHCI controller using DT")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org  # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16189/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index cabe256..4f8bc83 100644 (file)
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -60,7 +60,7 @@
                reg = <0x1b200000 0x1000>;
 
                interrupt-parent = <&gic>;
-               interrupts = <0>; /* GIC 0 or CPU 6 */
+               interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
 
                has-transaction-translator;
        };
@@ -223,7 +223,7 @@
                clock-frequency = <14745600>;
 
                interrupt-parent = <&gic>;
-               interrupts = <3>; /* GIC 3 or CPU 4 */
+               interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */
 
                no-loopback-test;
        };
@@ -238,7 +238,7 @@
                clock-frequency = <14745600>;
 
                interrupt-parent = <&gic>;
-               interrupts = <2>; /* GIC 2 or CPU 4 */
+               interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */
 
                no-loopback-test;
        };
@@ -249,7 +249,7 @@
                reg-io-width = <4>;
 
                interrupt-parent = <&gic>;
-               interrupts = <0>; /* GIC 0 or CPU 6 */
+               interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
 
                phy-mode = "mii";
                smsc,irq-push-pull;