--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _HCI_HAL_INIT_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_efuse.h>
+
+#include <rtl8188e_hal.h>
+#include <rtl8188e_led.h>
+#include <rtw_iol.h>
+#include <usb_ops.h>
+#include <usb_hal.h>
+#include <usb_osintf.h>
+
+#define HAL_MAC_ENABLE 1
+#define HAL_BB_ENABLE 1
+#define HAL_RF_ENABLE 1
+
+static void _ConfigNormalChipOutEP_8188E(struct adapter *adapt, u8 NumOutPipe)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+
+ switch (NumOutPipe) {
+ case 3:
+ haldata->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ;
+ haldata->OutEpNumber = 3;
+ break;
+ case 2:
+ haldata->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ;
+ haldata->OutEpNumber = 2;
+ break;
+ case 1:
+ haldata->OutEpQueueSel = TX_SELE_HQ;
+ haldata->OutEpNumber = 1;
+ break;
+ default:
+ break;
+ }
+ DBG_88E("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __func__, haldata->OutEpQueueSel, haldata->OutEpNumber);
+}
+
+static bool HalUsbSetQueuePipeMapping8188EUsb(struct adapter *adapt, u8 NumInPipe, u8 NumOutPipe)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ bool result = false;
+
+ _ConfigNormalChipOutEP_8188E(adapt, NumOutPipe);
+
+ /* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */
+ if (1 == haldata->OutEpNumber) {
+ if (1 != NumInPipe)
+ return result;
+ }
+
+ /* All config other than above support one Bulk IN and one Interrupt IN. */
+
+ result = Hal_MappingOutPipe(adapt, NumOutPipe);
+
+ return result;
+}
+
+static void rtl8188eu_interface_configure(struct adapter *adapt)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(adapt);
+
+ if (pdvobjpriv->ishighspeed)
+ haldata->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */
+ else
+ haldata->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */
+
+ haldata->interfaceIndex = pdvobjpriv->InterfaceNumber;
+
+ haldata->UsbTxAggMode = 1;
+ haldata->UsbTxAggDescNum = 0x6; /* only 4 bits */
+
+ haldata->UsbRxAggMode = USB_RX_AGG_DMA;/* USB_RX_AGG_DMA; */
+ haldata->UsbRxAggBlockCount = 8; /* unit : 512b */
+ haldata->UsbRxAggBlockTimeout = 0x6;
+ haldata->UsbRxAggPageCount = 48; /* uint :128 b 0x0A; 10 = MAX_RX_DMA_BUFFER_SIZE/2/haldata->UsbBulkOutSize */
+ haldata->UsbRxAggPageTimeout = 0x4; /* 6, absolute time = 34ms/(2^6) */
+
+ HalUsbSetQueuePipeMapping8188EUsb(adapt,
+ pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
+}
+
+static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
+{
+ u16 value16;
+ /* HW Power on sequence */
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ if (haldata->bMacPwrCtrlOn)
+ return _SUCCESS;
+
+ if (!HalPwrSeqCmdParsing(adapt, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) {
+ DBG_88E(KERN_ERR "%s: run power on flow fail\n", __func__);
+ return _FAIL;
+ }
+
+ /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
+ /* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
+ rtw_write16(adapt, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */
+
+ /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
+ value16 = rtw_read16(adapt, REG_CR);
+ value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
+ | PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
+ /* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
+
+ rtw_write16(adapt, REG_CR, value16);
+ haldata->bMacPwrCtrlOn = true;
+
+ return _SUCCESS;
+}
+
+/* Shall USB interface init this? */
+static void _InitInterrupt(struct adapter *Adapter)
+{
+ u32 imr, imr_ex;
+ u8 usb_opt;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ /* HISR write one to clear */
+ rtw_write32(Adapter, REG_HISR_88E, 0xFFFFFFFF);
+ /* HIMR - */
+ imr = IMR_PSTIMEOUT_88E | IMR_TBDER_88E | IMR_CPWM_88E | IMR_CPWM2_88E;
+ rtw_write32(Adapter, REG_HIMR_88E, imr);
+ haldata->IntrMask[0] = imr;
+
+ imr_ex = IMR_TXERR_88E | IMR_RXERR_88E | IMR_TXFOVW_88E | IMR_RXFOVW_88E;
+ rtw_write32(Adapter, REG_HIMRE_88E, imr_ex);
+ haldata->IntrMask[1] = imr_ex;
+
+ /* REG_USB_SPECIAL_OPTION - BIT(4) */
+ /* 0; Use interrupt endpoint to upload interrupt pkt */
+ /* 1; Use bulk endpoint to upload interrupt pkt, */
+ usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+
+ if (!adapter_to_dvobj(Adapter)->ishighspeed)
+ usb_opt = usb_opt & (~INT_BULK_SEL);
+ else
+ usb_opt = usb_opt | (INT_BULK_SEL);
+
+ rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt);
+}
+
+static void _InitQueueReservedPage(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ struct registry_priv *pregistrypriv = &Adapter->registrypriv;
+ u32 numHQ = 0;
+ u32 numLQ = 0;
+ u32 numNQ = 0;
+ u32 numPubQ;
+ u32 value32;
+ u8 value8;
+ bool bWiFiConfig = pregistrypriv->wifi_spec;
+
+ if (bWiFiConfig) {
+ if (haldata->OutEpQueueSel & TX_SELE_HQ)
+ numHQ = 0x29;
+
+ if (haldata->OutEpQueueSel & TX_SELE_LQ)
+ numLQ = 0x1C;
+
+ /* NOTE: This step shall be proceed before writting REG_RQPN. */
+ if (haldata->OutEpQueueSel & TX_SELE_NQ)
+ numNQ = 0x1C;
+ value8 = (u8)_NPQ(numNQ);
+ rtw_write8(Adapter, REG_RQPN_NPQ, value8);
+
+ numPubQ = 0xA8 - numHQ - numLQ - numNQ;
+
+ /* TX DMA */
+ value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
+ rtw_write32(Adapter, REG_RQPN, value32);
+ } else {
+ rtw_write16(Adapter, REG_RQPN_NPQ, 0x0000);/* Just follow MP Team,??? Georgia 03/28 */
+ rtw_write16(Adapter, REG_RQPN_NPQ, 0x0d);
+ rtw_write32(Adapter, REG_RQPN, 0x808E000d);/* reserve 7 page for LPS */
+ }
+}
+
+static void _InitTxBufferBoundary(struct adapter *Adapter, u8 txpktbuf_bndy)
+{
+ rtw_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
+ rtw_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
+ rtw_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
+ rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
+ rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
+}
+
+static void _InitPageBoundary(struct adapter *Adapter)
+{
+ /* RX Page Boundary */
+ /* */
+ u16 rxff_bndy = MAX_RX_DMA_BUFFER_SIZE_88E-1;
+
+ rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy);
+}
+
+static void _InitNormalChipRegPriority(struct adapter *Adapter, u16 beQ,
+ u16 bkQ, u16 viQ, u16 voQ, u16 mgtQ,
+ u16 hiQ)
+{
+ u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);
+
+ value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
+ _TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
+ _TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ);
+
+ rtw_write16(Adapter, REG_TRXDMA_CTRL, value16);
+}
+
+static void _InitNormalChipOneOutEpPriority(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ u16 value = 0;
+ switch (haldata->OutEpQueueSel) {
+ case TX_SELE_HQ:
+ value = QUEUE_HIGH;
+ break;
+ case TX_SELE_LQ:
+ value = QUEUE_LOW;
+ break;
+ case TX_SELE_NQ:
+ value = QUEUE_NORMAL;
+ break;
+ default:
+ break;
+ }
+ _InitNormalChipRegPriority(Adapter, value, value, value, value,
+ value, value);
+}
+
+static void _InitNormalChipTwoOutEpPriority(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ struct registry_priv *pregistrypriv = &Adapter->registrypriv;
+ u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
+ u16 valueHi = 0;
+ u16 valueLow = 0;
+
+ switch (haldata->OutEpQueueSel) {
+ case (TX_SELE_HQ | TX_SELE_LQ):
+ valueHi = QUEUE_HIGH;
+ valueLow = QUEUE_LOW;
+ break;
+ case (TX_SELE_NQ | TX_SELE_LQ):
+ valueHi = QUEUE_NORMAL;
+ valueLow = QUEUE_LOW;
+ break;
+ case (TX_SELE_HQ | TX_SELE_NQ):
+ valueHi = QUEUE_HIGH;
+ valueLow = QUEUE_NORMAL;
+ break;
+ default:
+ break;
+ }
+
+ if (!pregistrypriv->wifi_spec) {
+ beQ = valueLow;
+ bkQ = valueLow;
+ viQ = valueHi;
+ voQ = valueHi;
+ mgtQ = valueHi;
+ hiQ = valueHi;
+ } else {/* for WMM ,CONFIG_OUT_EP_WIFI_MODE */
+ beQ = valueLow;
+ bkQ = valueHi;
+ viQ = valueHi;
+ voQ = valueLow;
+ mgtQ = valueHi;
+ hiQ = valueHi;
+ }
+ _InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
+}
+
+static void _InitNormalChipThreeOutEpPriority(struct adapter *Adapter)
+{
+ struct registry_priv *pregistrypriv = &Adapter->registrypriv;
+ u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
+
+ if (!pregistrypriv->wifi_spec) {/* typical setting */
+ beQ = QUEUE_LOW;
+ bkQ = QUEUE_LOW;
+ viQ = QUEUE_NORMAL;
+ voQ = QUEUE_HIGH;
+ mgtQ = QUEUE_HIGH;
+ hiQ = QUEUE_HIGH;
+ } else {/* for WMM */
+ beQ = QUEUE_LOW;
+ bkQ = QUEUE_NORMAL;
+ viQ = QUEUE_NORMAL;
+ voQ = QUEUE_HIGH;
+ mgtQ = QUEUE_HIGH;
+ hiQ = QUEUE_HIGH;
+ }
+ _InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
+}
+
+static void _InitQueuePriority(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ switch (haldata->OutEpNumber) {
+ case 1:
+ _InitNormalChipOneOutEpPriority(Adapter);
+ break;
+ case 2:
+ _InitNormalChipTwoOutEpPriority(Adapter);
+ break;
+ case 3:
+ _InitNormalChipThreeOutEpPriority(Adapter);
+ break;
+ default:
+ break;
+ }
+}
+
+static void _InitNetworkType(struct adapter *Adapter)
+{
+ u32 value32;
+
+ value32 = rtw_read32(Adapter, REG_CR);
+ /* TODO: use the other function to set network type */
+ value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
+
+ rtw_write32(Adapter, REG_CR, value32);
+}
+
+static void _InitTransferPageSize(struct adapter *Adapter)
+{
+ /* Tx page size is always 128. */
+
+ u8 value8;
+ value8 = _PSRX(PBP_128) | _PSTX(PBP_128);
+ rtw_write8(Adapter, REG_PBP, value8);
+}
+
+static void _InitDriverInfoSize(struct adapter *Adapter, u8 drvInfoSize)
+{
+ rtw_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
+}
+
+static void _InitWMACSetting(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ haldata->ReceiveConfig = RCR_AAP | RCR_APM | RCR_AM | RCR_AB |
+ RCR_CBSSID_DATA | RCR_CBSSID_BCN |
+ RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL |
+ RCR_APP_MIC | RCR_APP_PHYSTS;
+
+ /* some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile() */
+ rtw_write32(Adapter, REG_RCR, haldata->ReceiveConfig);
+
+ /* Accept all multicast address */
+ rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
+ rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
+}
+
+static void _InitAdaptiveCtrl(struct adapter *Adapter)
+{
+ u16 value16;
+ u32 value32;
+
+ /* Response Rate Set */
+ value32 = rtw_read32(Adapter, REG_RRSR);
+ value32 &= ~RATE_BITMAP_ALL;
+ value32 |= RATE_RRSR_CCK_ONLY_1M;
+ rtw_write32(Adapter, REG_RRSR, value32);
+
+ /* CF-END Threshold */
+
+ /* SIFS (used in NAV) */
+ value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
+ rtw_write16(Adapter, REG_SPEC_SIFS, value16);
+
+ /* Retry Limit */
+ value16 = _LRL(0x30) | _SRL(0x30);
+ rtw_write16(Adapter, REG_RL, value16);
+}
+
+static void _InitEDCA(struct adapter *Adapter)
+{
+ /* Set Spec SIFS (used in NAV) */
+ rtw_write16(Adapter, REG_SPEC_SIFS, 0x100a);
+ rtw_write16(Adapter, REG_MAC_SPEC_SIFS, 0x100a);
+
+ /* Set SIFS for CCK */
+ rtw_write16(Adapter, REG_SIFS_CTX, 0x100a);
+
+ /* Set SIFS for OFDM */
+ rtw_write16(Adapter, REG_SIFS_TRX, 0x100a);
+
+ /* TXOP */
+ rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
+ rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
+ rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
+ rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
+}
+
+static void _InitBeaconMaxError(struct adapter *Adapter, bool InfraMode)
+{
+}
+
+static void _InitHWLed(struct adapter *Adapter)
+{
+ struct led_priv *pledpriv = &(Adapter->ledpriv);
+
+ if (pledpriv->LedStrategy != HW_LED)
+ return;
+
+/* HW led control */
+/* to do .... */
+/* must consider cases of antenna diversity/ commbo card/solo card/mini card */
+}
+
+static void _InitRDGSetting(struct adapter *Adapter)
+{
+ rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
+ rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
+ rtw_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
+}
+
+static void _InitRxSetting(struct adapter *Adapter)
+{
+ rtw_write32(Adapter, REG_MACID, 0x87654321);
+ rtw_write32(Adapter, 0x0700, 0x87654321);
+}
+
+static void _InitRetryFunction(struct adapter *Adapter)
+{
+ u8 value8;
+
+ value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
+ value8 |= EN_AMPDU_RTY_NEW;
+ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
+
+ /* Set ACK timeout */
+ rtw_write8(Adapter, REG_ACKTO, 0x40);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: usb_AggSettingTxUpdate()
+ *
+ * Overview: Seperate TX/RX parameters update independent for TP detection and
+ * dynamic TX/RX aggreagtion parameters update.
+ *
+ * Input: struct adapter *
+ *
+ * Output/Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 12/10/2010 MHC Seperate to smaller function.
+ *
+ *---------------------------------------------------------------------------*/
+static void usb_AggSettingTxUpdate(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ u32 value32;
+
+ if (Adapter->registrypriv.wifi_spec)
+ haldata->UsbTxAggMode = false;
+
+ if (haldata->UsbTxAggMode) {
+ value32 = rtw_read32(Adapter, REG_TDECTRL);
+ value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
+ value32 |= ((haldata->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
+
+ rtw_write32(Adapter, REG_TDECTRL, value32);
+ }
+} /* usb_AggSettingTxUpdate */
+
+/*-----------------------------------------------------------------------------
+ * Function: usb_AggSettingRxUpdate()
+ *
+ * Overview: Seperate TX/RX parameters update independent for TP detection and
+ * dynamic TX/RX aggreagtion parameters update.
+ *
+ * Input: struct adapter *
+ *
+ * Output/Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 12/10/2010 MHC Seperate to smaller function.
+ *
+ *---------------------------------------------------------------------------*/
+static void
+usb_AggSettingRxUpdate(
+ struct adapter *Adapter
+ )
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ u8 valueDMA;
+ u8 valueUSB;
+
+ valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
+ valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+
+ switch (haldata->UsbRxAggMode) {
+ case USB_RX_AGG_DMA:
+ valueDMA |= RXDMA_AGG_EN;
+ valueUSB &= ~USB_AGG_EN;
+ break;
+ case USB_RX_AGG_USB:
+ valueDMA &= ~RXDMA_AGG_EN;
+ valueUSB |= USB_AGG_EN;
+ break;
+ case USB_RX_AGG_MIX:
+ valueDMA |= RXDMA_AGG_EN;
+ valueUSB |= USB_AGG_EN;
+ break;
+ case USB_RX_AGG_DISABLE:
+ default:
+ valueDMA &= ~RXDMA_AGG_EN;
+ valueUSB &= ~USB_AGG_EN;
+ break;
+ }
+
+ rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
+ rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB);
+
+ switch (haldata->UsbRxAggMode) {
+ case USB_RX_AGG_DMA:
+ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
+ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, haldata->UsbRxAggPageTimeout);
+ break;
+ case USB_RX_AGG_USB:
+ rtw_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
+ rtw_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
+ break;
+ case USB_RX_AGG_MIX:
+ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
+ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, (haldata->UsbRxAggPageTimeout & 0x1F));/* 0x280[12:8] */
+ rtw_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
+ rtw_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
+ break;
+ case USB_RX_AGG_DISABLE:
+ default:
+ /* TODO: */
+ break;
+ }
+
+ switch (PBP_128) {
+ case PBP_128:
+ haldata->HwRxPageSize = 128;
+ break;
+ case PBP_64:
+ haldata->HwRxPageSize = 64;
+ break;
+ case PBP_256:
+ haldata->HwRxPageSize = 256;
+ break;
+ case PBP_512:
+ haldata->HwRxPageSize = 512;
+ break;
+ case PBP_1024:
+ haldata->HwRxPageSize = 1024;
+ break;
+ default:
+ break;
+ }
+} /* usb_AggSettingRxUpdate */
+
+static void InitUsbAggregationSetting(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ /* Tx aggregation setting */
+ usb_AggSettingTxUpdate(Adapter);
+
+ /* Rx aggregation setting */
+ usb_AggSettingRxUpdate(Adapter);
+
+ /* 201/12/10 MH Add for USB agg mode dynamic switch. */
+ haldata->UsbRxHighSpeedMode = false;
+}
+
+static void _InitOperationMode(struct adapter *Adapter)
+{
+}
+
+static void _InitBeaconParameters(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ rtw_write16(Adapter, REG_BCN_CTRL, 0x1010);
+
+ /* TODO: Remove these magic number */
+ rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0x6404);/* ms */
+ rtw_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);/* 5ms */
+ rtw_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); /* 2ms */
+
+ /* Suggested by designer timchen. Change beacon AIFS to the largest number */
+ /* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */
+ rtw_write16(Adapter, REG_BCNTCFG, 0x660F);
+
+ haldata->RegBcnCtrlVal = rtw_read8(Adapter, REG_BCN_CTRL);
+ haldata->RegTxPause = rtw_read8(Adapter, REG_TXPAUSE);
+ haldata->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL+2);
+ haldata->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT+2);
+ haldata->RegCR_1 = rtw_read8(Adapter, REG_CR+1);
+}
+
+static void _BeaconFunctionEnable(struct adapter *Adapter,
+ bool Enable, bool Linked)
+{
+ rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
+
+ rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F);
+}
+
+/* Set CCK and OFDM Block "ON" */
+static void _BBTurnOnBlock(struct adapter *Adapter)
+{
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
+}
+
+enum {
+ Antenna_Lfet = 1,
+ Antenna_Right = 2,
+};
+
+static void _InitAntenna_Selection(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ if (haldata->AntDivCfg == 0)
+ return;
+ DBG_88E("==> %s ....\n", __func__);
+
+ rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT23);
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
+
+ if (PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A)
+ haldata->CurAntenna = Antenna_A;
+ else
+ haldata->CurAntenna = Antenna_B;
+ DBG_88E("%s,Cur_ant:(%x)%s\n", __func__, haldata->CurAntenna, (haldata->CurAntenna == Antenna_A) ? "Antenna_A" : "Antenna_B");
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: HwSuspendModeEnable92Cu()
+ *
+ * Overview: HW suspend mode switch.
+ *
+ * Input: NONE
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 08/23/2010 MHC HW suspend mode switch test..
+ *---------------------------------------------------------------------------*/
+enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)
+{
+ u8 val8;
+ enum rt_rf_power_state rfpowerstate = rf_off;
+
+ if (adapt->pwrctrlpriv.bHWPowerdown) {
+ val8 = rtw_read8(adapt, REG_HSISR);
+ DBG_88E("pwrdown, 0x5c(BIT7)=%02x\n", val8);
+ rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
+ } else { /* rf on/off */
+ rtw_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
+ val8 = rtw_read8(adapt, REG_GPIO_IO_SEL);
+ DBG_88E("GPIO_IN=%02x\n", val8);
+ rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
+ }
+ return rfpowerstate;
+} /* HalDetectPwrDownMode */
+
+static u32 rtl8188eu_hal_init(struct adapter *Adapter)
+{
+ u8 value8 = 0;
+ u16 value16;
+ u8 txpktbuf_bndy;
+ u32 status = _SUCCESS;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
+ struct registry_priv *pregistrypriv = &Adapter->registrypriv;
+ u32 init_start_time = rtw_get_current_time();
+
+ #define HAL_INIT_PROFILE_TAG(stage) do {} while (0)
+
+_func_enter_;
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
+
+ if (Adapter->pwrctrlpriv.bkeepfwalive) {
+ _ps_open_RF(Adapter);
+
+ if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) {
+ PHY_IQCalibrate_8188E(Adapter, true);
+ } else {
+ PHY_IQCalibrate_8188E(Adapter, false);
+ haldata->odmpriv.RFCalibrateInfo.bIQKInitialized = true;
+ }
+
+ ODM_TXPowerTrackingCheck(&haldata->odmpriv);
+ PHY_LCCalibrate_8188E(Adapter);
+
+ goto exit;
+ }
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
+ status = rtl8188eu_InitPowerOn(Adapter);
+ if (status == _FAIL) {
+ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
+ goto exit;
+ }
+
+ /* Save target channel */
+ haldata->CurrentChannel = 6;/* default set to 6 */
+
+ if (pwrctrlpriv->reg_rfoff) {
+ pwrctrlpriv->rf_pwrstate = rf_off;
+ }
+
+ /* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */
+ /* HW GPIO pin. Before PHY_RFConfig8192C. */
+ /* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */
+
+ if (!pregistrypriv->wifi_spec) {
+ txpktbuf_bndy = TX_PAGE_BOUNDARY_88E;
+ } else {
+ /* for WMM */
+ txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_88E;
+ }
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
+ _InitQueueReservedPage(Adapter);
+ _InitQueuePriority(Adapter);
+ _InitPageBoundary(Adapter);
+ _InitTransferPageSize(Adapter);
+
+ _InitTxBufferBoundary(Adapter, 0);
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
+ if (Adapter->registrypriv.mp_mode == 1) {
+ _InitRxSetting(Adapter);
+ Adapter->bFWReady = false;
+ haldata->fw_ractrl = false;
+ } else {
+ status = rtl8188e_FirmwareDownload(Adapter);
+
+ if (status != _SUCCESS) {
+ DBG_88E("%s: Download Firmware failed!!\n", __func__);
+ Adapter->bFWReady = false;
+ haldata->fw_ractrl = false;
+ return status;
+ } else {
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
+ Adapter->bFWReady = true;
+ haldata->fw_ractrl = false;
+ }
+ }
+ rtl8188e_InitializeFirmwareVars(Adapter);
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
+#if (HAL_MAC_ENABLE == 1)
+ status = PHY_MACConfig8188E(Adapter);
+ if (status == _FAIL) {
+ DBG_88E(" ### Failed to init MAC ......\n ");
+ goto exit;
+ }
+#endif
+
+ /* */
+ /* d. Initialize BB related configurations. */
+ /* */
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
+#if (HAL_BB_ENABLE == 1)
+ status = PHY_BBConfig8188E(Adapter);
+ if (status == _FAIL) {
+ DBG_88E(" ### Failed to init BB ......\n ");
+ goto exit;
+ }
+#endif
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
+#if (HAL_RF_ENABLE == 1)
+ status = PHY_RFConfig8188E(Adapter);
+ if (status == _FAIL) {
+ DBG_88E(" ### Failed to init RF ......\n ");
+ goto exit;
+ }
+#endif
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH);
+ status = rtl8188e_iol_efuse_patch(Adapter);
+ if (status == _FAIL) {
+ DBG_88E("%s rtl8188e_iol_efuse_patch failed\n", __func__);
+ goto exit;
+ }
+
+ _InitTxBufferBoundary(Adapter, txpktbuf_bndy);
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
+ status = InitLLTTable(Adapter, txpktbuf_bndy);
+ if (status == _FAIL) {
+ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
+ goto exit;
+ }
+
+ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
+ /* Get Rx PHY status in order to report RSSI and others. */
+ _InitDriverInfoSize(Adapter, DRVINFO_SZ);
+
+ _InitInterrupt(Adapter);
+ hal_init_macaddr(Adapter);/* set mac_address */
+ _InitNetworkType(Adapter);/* set msr */
+ _InitWMACSetting(Adapter);
+ _InitAdaptiveCtrl(Adapter);
+ _InitEDCA(Adapter);
+ _InitRetryFunction(Adapter);
+ InitUsbAggregationSetting(Adapter);
+ _InitOperationMode(Adapter);/* todo */
+ _InitBeaconParameters(Adapter);
+ _InitBeaconMaxError(Adapter, true);
+
+ /* */
+ /* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
+ /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
+ /* */
+ /* Enable MACTXEN/MACRXEN block */
+ value16 = rtw_read16(Adapter, REG_CR);
+ value16 |= (MACTXEN | MACRXEN);
+ rtw_write8(Adapter, REG_CR, value16);
+
+ if (haldata->bRDGEnable)
+ _InitRDGSetting(Adapter);
+
+ /* Enable TX Report */
+ /* Enable Tx Report Timer */
+ value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
+ /* Set MAX RPT MACID */
+ rtw_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
+ /* Tx RPT Timer. Unit: 32us */
+ rtw_write16(Adapter, REG_TX_RPT_TIME, 0xCdf0);
+
+ rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0);
+
+ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+
+ _InitHWLed(Adapter);
+
+ /* Keep RfRegChnlVal for later use. */
+ haldata->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
+ haldata->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
+ _BBTurnOnBlock(Adapter);
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
+ invalidate_cam_all(Adapter);
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
+ /* 2010/12/17 MH We need to set TX power according to EFUSE content at first. */
+ PHY_SetTxPowerLevel8188E(Adapter, haldata->CurrentChannel);
+
+/* Move by Neo for USB SS to below setp */
+/* _RfPowerSave(Adapter); */
+
+ _InitAntenna_Selection(Adapter);
+
+ /* */
+ /* Disable BAR, suggested by Scott */
+ /* 2010.04.09 add by hpfan */
+ /* */
+ rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
+
+ /* HW SEQ CTRL */
+ /* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
+ rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
+
+ if (pregistrypriv->wifi_spec)
+ rtw_write16(Adapter, REG_FAST_EDCA_CTRL, 0);
+
+ /* Nav limit , suggest by scott */
+ rtw_write8(Adapter, 0x652, 0x0);
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
+ rtl8188e_InitHalDm(Adapter);
+
+ if (Adapter->registrypriv.mp_mode == 1) {
+ Adapter->mppriv.channel = haldata->CurrentChannel;
+ MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
+ } else {
+ /* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */
+ /* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */
+ /* call initstruct adapter. May cause some problem?? */
+ /* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */
+ /* in MgntActSet_RF_State() after wake up, because the value of haldata->eRFPowerState */
+ /* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */
+ /* Added by tynli. 2010.03.30. */
+ pwrctrlpriv->rf_pwrstate = rf_on;
+
+ /* enable Tx report. */
+ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F);
+
+ /* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */
+ rtw_write8(Adapter, REG_EARLY_MODE_CONTROL+3, 0x01);/* Pretx_en, for WEP/TKIP SEC */
+
+ /* tynli_test_tx_report. */
+ rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
+
+ /* enable tx DMA to drop the redundate data of packet */
+ rtw_write16(Adapter, REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter, REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN));
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
+ /* 2010/08/26 MH Merge from 8192CE. */
+ if (pwrctrlpriv->rf_pwrstate == rf_on) {
+ if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) {
+ PHY_IQCalibrate_8188E(Adapter, true);
+ } else {
+ PHY_IQCalibrate_8188E(Adapter, false);
+ haldata->odmpriv.RFCalibrateInfo.bIQKInitialized = true;
+ }
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
+
+ ODM_TXPowerTrackingCheck(&haldata->odmpriv);
+
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
+ PHY_LCCalibrate_8188E(Adapter);
+ }
+ }
+
+/* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); */
+/* _InitPABias(Adapter); */
+ rtw_write8(Adapter, REG_USB_HRPWM, 0);
+
+ /* ack for xmit mgmt frames. */
+ rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
+
+exit:
+HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
+
+ DBG_88E("%s in %dms\n", __func__, rtw_get_passing_time_ms(init_start_time));
+
+_func_exit_;
+
+ return status;
+}
+
+void _ps_open_RF(struct adapter *adapt)
+{
+ /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
+ /* phy_SsPwrSwitch92CU(adapt, rf_on, 1); */
+}
+
+static void _ps_close_RF(struct adapter *adapt)
+{
+ /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
+ /* phy_SsPwrSwitch92CU(adapt, rf_off, 1); */
+}
+
+static void CardDisableRTL8188EU(struct adapter *Adapter)
+{
+ u8 val8;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("CardDisableRTL8188EU\n"));
+
+ /* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
+ val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
+
+ /* stop rx */
+ rtw_write8(Adapter, REG_CR, 0x0);
+
+ /* Run LPS WL RFOFF flow */
+ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
+
+ /* 2. 0x1F[7:0] = 0 turn off RF */
+
+ val8 = rtw_read8(Adapter, REG_MCUFWDL);
+ if ((val8 & RAM_DL_SEL) && Adapter->bFWReady) { /* 8051 RAM code */
+ /* Reset MCU 0x2[10]=0. */
+ val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
+ val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
+ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
+ }
+
+ /* reset MCU ready status */
+ rtw_write8(Adapter, REG_MCUFWDL, 0);
+
+ /* YJ,add,111212 */
+ /* Disable 32k */
+ val8 = rtw_read8(Adapter, REG_32K_CTRL);
+ rtw_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
+
+ /* Card disable power action flow */
+ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+
+ /* Reset MCU IO Wrapper */
+ val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
+ rtw_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
+ val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
+ rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
+
+ /* YJ,test add, 111207. For Power Consumption. */
+ val8 = rtw_read8(Adapter, GPIO_IN);
+ rtw_write8(Adapter, GPIO_OUT, val8);
+ rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
+
+ val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
+ rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
+ val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL+1);
+ rtw_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);/* Reg0x43 */
+ rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
+ haldata->bMacPwrCtrlOn = false;
+ Adapter->bFWReady = false;
+}
+static void rtl8192cu_hw_power_down(struct adapter *adapt)
+{
+ /* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */
+ /* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */
+
+ /* Enable register area 0x0-0xc. */
+ rtw_write8(adapt, REG_RSV_CTRL, 0x0);
+ rtw_write16(adapt, REG_APS_FSMCO, 0x8812);
+}
+
+static u32 rtl8188eu_hal_deinit(struct adapter *Adapter)
+{
+
+ DBG_88E("==> %s\n", __func__);
+
+ rtw_write32(Adapter, REG_HIMR_88E, IMR_DISABLED_88E);
+ rtw_write32(Adapter, REG_HIMRE_88E, IMR_DISABLED_88E);
+
+ DBG_88E("bkeepfwalive(%x)\n", Adapter->pwrctrlpriv.bkeepfwalive);
+ if (Adapter->pwrctrlpriv.bkeepfwalive) {
+ _ps_close_RF(Adapter);
+ if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown))
+ rtl8192cu_hw_power_down(Adapter);
+ } else {
+ if (Adapter->hw_init_completed) {
+ CardDisableRTL8188EU(Adapter);
+
+ if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown))
+ rtl8192cu_hw_power_down(Adapter);
+ }
+ }
+ return _SUCCESS;
+ }
+
+static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)
+{
+ u8 i;
+ struct recv_buf *precvbuf;
+ uint status;
+ struct intf_hdl *pintfhdl = &Adapter->iopriv.intf;
+ struct recv_priv *precvpriv = &(Adapter->recvpriv);
+ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
+
+_func_enter_;
+
+ _read_port = pintfhdl->io_ops._read_port;
+
+ status = _SUCCESS;
+
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
+ ("===> usb_inirp_init\n"));
+
+ precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
+
+ /* issue Rx irp to receive data */
+ precvbuf = (struct recv_buf *)precvpriv->precv_buf;
+ for (i = 0; i < NR_RECVBUFF; i++) {
+ if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == false) {
+ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n"));
+ status = _FAIL;
+ goto exit;
+ }
+
+ precvbuf++;
+ precvpriv->free_recv_buf_queue_cnt--;
+ }
+
+exit:
+
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n"));
+
+_func_exit_;
+
+ return status;
+}
+
+static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)
+{
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("\n ===> usb_rx_deinit\n"));
+
+ rtw_read_port_cancel(Adapter);
+
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("\n <=== usb_rx_deinit\n"));
+
+ return _SUCCESS;
+}
+
+/* */
+/* */
+/* EEPROM/EFUSE Content Parsing */
+/* */
+/* */
+static void _ReadLEDSetting(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
+{
+ struct led_priv *pledpriv = &(Adapter->ledpriv);
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ pledpriv->bRegUseLed = true;
+ pledpriv->LedStrategy = SW_LED_MODE1;
+ haldata->bLedOpenDrain = true;/* Support Open-drain arrangement for controlling the LED. */
+}
+
+static void Hal_EfuseParsePIDVID_8188EU(struct adapter *adapt, u8 *hwinfo, bool AutoLoadFail)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+
+ if (!AutoLoadFail) {
+ /* VID, PID */
+ haldata->EEPROMVID = EF2BYTE(*(__le16 *)&hwinfo[EEPROM_VID_88EU]);
+ haldata->EEPROMPID = EF2BYTE(*(__le16 *)&hwinfo[EEPROM_PID_88EU]);
+
+ /* Customer ID, 0x00 and 0xff are reserved for Realtek. */
+ haldata->EEPROMCustomerID = *(u8 *)&hwinfo[EEPROM_CUSTOMERID_88E];
+ haldata->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
+ } else {
+ haldata->EEPROMVID = EEPROM_Default_VID;
+ haldata->EEPROMPID = EEPROM_Default_PID;
+
+ /* Customer ID, 0x00 and 0xff are reserved for Realtek. */
+ haldata->EEPROMCustomerID = EEPROM_Default_CustomerID;
+ haldata->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
+ }
+
+ DBG_88E("VID = 0x%04X, PID = 0x%04X\n", haldata->EEPROMVID, haldata->EEPROMPID);
+ DBG_88E("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", haldata->EEPROMCustomerID, haldata->EEPROMSubCustomerID);
+}
+
+static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool AutoLoadFail)
+{
+ u16 i;
+ u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x88, 0x02};
+ struct eeprom_priv *eeprom = GET_EEPROM_EFUSE_PRIV(adapt);
+
+ if (AutoLoadFail) {
+ for (i = 0; i < 6; i++)
+ eeprom->mac_addr[i] = sMacAddr[i];
+ } else {
+ /* Read Permanent MAC address */
+ memcpy(eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN);
+ }
+ RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
+ ("Hal_EfuseParseMACAddr_8188EU: Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
+ eeprom->mac_addr[0], eeprom->mac_addr[1],
+ eeprom->mac_addr[2], eeprom->mac_addr[3],
+ eeprom->mac_addr[4], eeprom->mac_addr[5]));
+}
+
+static void Hal_CustomizeByCustomerID_8188EU(struct adapter *adapt)
+{
+}
+
+static void
+readAdapterInfo_8188EU(
+ struct adapter *adapt
+ )
+{
+ struct eeprom_priv *eeprom = GET_EEPROM_EFUSE_PRIV(adapt);
+
+ /* parse the eeprom/efuse content */
+ Hal_EfuseParseIDCode88E(adapt, eeprom->efuse_eeprom_data);
+ Hal_EfuseParsePIDVID_8188EU(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_EfuseParseMACAddr_8188EU(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+
+ Hal_ReadPowerSavingMode88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_ReadTxPowerInfo88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_EfuseParseEEPROMVer88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ rtl8188e_EfuseParseChnlPlan(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_EfuseParseXtal_8188E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_EfuseParseCustomerID88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_ReadAntennaDiversity88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_EfuseParseBoardType88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+ Hal_ReadThermalMeter_88E(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+
+ /* */
+ /* The following part initialize some vars by PG info. */
+ /* */
+ Hal_InitChannelPlan(adapt);
+ Hal_CustomizeByCustomerID_8188EU(adapt);
+
+ _ReadLEDSetting(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
+}
+
+static void _ReadPROMContent(
+ struct adapter *Adapter
+ )
+{
+ struct eeprom_priv *eeprom = GET_EEPROM_EFUSE_PRIV(Adapter);
+ u8 eeValue;
+
+ /* check system boot selection */
+ eeValue = rtw_read8(Adapter, REG_9346CR);
+ eeprom->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
+ eeprom->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
+
+ DBG_88E("Boot from %s, Autoload %s !\n", (eeprom->EepromOrEfuse ? "EEPROM" : "EFUSE"),
+ (eeprom->bautoload_fail_flag ? "Fail" : "OK"));
+
+ Hal_InitPGData88E(Adapter);
+ readAdapterInfo_8188EU(Adapter);
+}
+
+static void _ReadRFType(struct adapter *Adapter)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+
+ haldata->rf_chip = RF_6052;
+}
+
+static int _ReadAdapterInfo8188EU(struct adapter *Adapter)
+{
+ u32 start = rtw_get_current_time();
+
+ MSG_88E("====> %s\n", __func__);
+
+ _ReadRFType(Adapter);/* rf_chip -> _InitRFType() */
+ _ReadPROMContent(Adapter);
+
+ MSG_88E("<==== %s in %d ms\n", __func__, rtw_get_passing_time_ms(start));
+
+ return _SUCCESS;
+}
+
+static void ReadAdapterInfo8188EU(struct adapter *Adapter)
+{
+ /* Read EEPROM size before call any EEPROM function */
+ Adapter->EepromAddressSize = GetEEPROMSize8188E(Adapter);
+
+ _ReadAdapterInfo8188EU(Adapter);
+}
+
+#define GPIO_DEBUG_PORT_NUM 0
+static void rtl8192cu_trigger_gpio_0(struct adapter *adapt)
+{
+}
+
+static void ResumeTxBeacon(struct adapter *adapt)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+
+ /* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
+ /* which should be read from register to a global variable. */
+
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT6);
+ haldata->RegFwHwTxQCtrl |= BIT6;
+ rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0xff);
+ haldata->RegReg542 |= BIT0;
+ rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
+}
+
+static void StopTxBeacon(struct adapter *adapt)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+
+ /* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
+ /* which should be read from register to a global variable. */
+
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT6));
+ haldata->RegFwHwTxQCtrl &= (~BIT6);
+ rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0x64);
+ haldata->RegReg542 &= ~(BIT0);
+ rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
+
+ /* todo: CheckFwRsvdPageContent(Adapter); 2010.06.23. Added by tynli. */
+}
+
+static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ u8 val8;
+ u8 mode = *((u8 *)val);
+
+ /* disable Port0 TSF update */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+
+ /* set net_type */
+ val8 = rtw_read8(Adapter, MSR)&0x0c;
+ val8 |= mode;
+ rtw_write8(Adapter, MSR, val8);
+
+ DBG_88E("%s()-%d mode = %d\n", __func__, __LINE__, mode);
+
+ if ((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) {
+ StopTxBeacon(Adapter);
+
+ rtw_write8(Adapter, REG_BCN_CTRL, 0x19);/* disable atim wnd */
+ } else if ((mode == _HW_STATE_ADHOC_)) {
+ ResumeTxBeacon(Adapter);
+ rtw_write8(Adapter, REG_BCN_CTRL, 0x1a);
+ } else if (mode == _HW_STATE_AP_) {
+ ResumeTxBeacon(Adapter);
+
+ rtw_write8(Adapter, REG_BCN_CTRL, 0x12);
+
+ /* Set RCR */
+ rtw_write32(Adapter, REG_RCR, 0x7000208e);/* CBSSID_DATA must set to 0,reject ICV_ERR packet */
+ /* enable to rx data frame */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
+ /* enable to rx ps-poll */
+ rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400);
+
+ /* Beacon Control related register for first time */
+ rtw_write8(Adapter, REG_BCNDMATIM, 0x02); /* 2ms */
+
+ rtw_write8(Adapter, REG_ATIMWND, 0x0a); /* 10ms */
+ rtw_write16(Adapter, REG_BCNTCFG, 0x00);
+ rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04);
+ rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);/* +32767 (~32ms) */
+
+ /* reset TSF */
+ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
+
+ /* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
+ rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
+
+ /* enable BCN0 Function for if1 */
+ /* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */
+ rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | BIT(1)));
+
+ /* dis BCN1 ATIM WND if if2 is station */
+ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
+ }
+}
+
+static void hw_var_set_macaddr(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ u8 idx = 0;
+ u32 reg_macid;
+
+ reg_macid = REG_MACID;
+
+ for (idx = 0; idx < 6; idx++)
+ rtw_write8(Adapter, (reg_macid+idx), val[idx]);
+}
+
+static void hw_var_set_bssid(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ u8 idx = 0;
+ u32 reg_bssid;
+
+ reg_bssid = REG_BSSID;
+
+ for (idx = 0; idx < 6; idx++)
+ rtw_write8(Adapter, (reg_bssid+idx), val[idx]);
+}
+
+static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ u32 bcn_ctrl_reg;
+
+ bcn_ctrl_reg = REG_BCN_CTRL;
+
+ if (*((u8 *)val))
+ rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
+ else
+ rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
+}
+
+static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &haldata->dmpriv;
+ struct odm_dm_struct *podmpriv = &haldata->odmpriv;
+_func_enter_;
+
+ switch (variable) {
+ case HW_VAR_MEDIA_STATUS:
+ {
+ u8 val8;
+
+ val8 = rtw_read8(Adapter, MSR)&0x0c;
+ val8 |= *((u8 *)val);
+ rtw_write8(Adapter, MSR, val8);
+ }
+ break;
+ case HW_VAR_MEDIA_STATUS1:
+ {
+ u8 val8;
+
+ val8 = rtw_read8(Adapter, MSR) & 0x03;
+ val8 |= *((u8 *)val) << 2;
+ rtw_write8(Adapter, MSR, val8);
+ }
+ break;
+ case HW_VAR_SET_OPMODE:
+ hw_var_set_opmode(Adapter, variable, val);
+ break;
+ case HW_VAR_MAC_ADDR:
+ hw_var_set_macaddr(Adapter, variable, val);
+ break;
+ case HW_VAR_BSSID:
+ hw_var_set_bssid(Adapter, variable, val);
+ break;
+ case HW_VAR_BASIC_RATE:
+ {
+ u16 BrateCfg = 0;
+ u8 RateIndex = 0;
+
+ /* 2007.01.16, by Emily */
+ /* Select RRSR (in Legacy-OFDM and CCK) */
+ /* For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate. */
+ /* We do not use other rates. */
+ HalSetBrateCfg(Adapter, val, &BrateCfg);
+ DBG_88E("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n", BrateCfg);
+
+ /* 2011.03.30 add by Luke Lee */
+ /* CCK 2M ACK should be disabled for some BCM and Atheros AP IOT */
+ /* because CCK 2M has poor TXEVM */
+ /* CCK 5.5M & 11M ACK should be enabled for better performance */
+
+ BrateCfg = (BrateCfg | 0xd) & 0x15d;
+ haldata->BasicRateSet = BrateCfg;
+
+ BrateCfg |= 0x01; /* default enable 1M ACK rate */
+ /* Set RRSR rate table. */
+ rtw_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
+ rtw_write8(Adapter, REG_RRSR+1, (BrateCfg >> 8) & 0xff);
+ rtw_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0);
+
+ /* Set RTS initial rate */
+ while (BrateCfg > 0x1) {
+ BrateCfg = (BrateCfg >> 1);
+ RateIndex++;
+ }
+ /* Ziv - Check */
+ rtw_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex);
+ }
+ break;
+ case HW_VAR_TXPAUSE:
+ rtw_write8(Adapter, REG_TXPAUSE, *((u8 *)val));
+ break;
+ case HW_VAR_BCN_FUNC:
+ hw_var_set_bcn_func(Adapter, variable, val);
+ break;
+ case HW_VAR_CORRECT_TSF:
+ {
+ u64 tsf;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+
+ tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) - 1024; /* us */
+
+ if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
+ StopTxBeacon(Adapter);
+
+ /* disable related TSF function */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
+
+ rtw_write32(Adapter, REG_TSFTR, tsf);
+ rtw_write32(Adapter, REG_TSFTR+4, tsf>>32);
+
+ /* enable related TSF function */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
+
+ if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
+ ResumeTxBeacon(Adapter);
+ }
+ break;
+ case HW_VAR_CHECK_BSSID:
+ if (*((u8 *)val)) {
+ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
+ } else {
+ u32 val32;
+
+ val32 = rtw_read32(Adapter, REG_RCR);
+
+ val32 &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+
+ rtw_write32(Adapter, REG_RCR, val32);
+ }
+ break;
+ case HW_VAR_MLME_DISCONNECT:
+ /* Set RCR to not to receive data frame when NO LINK state */
+ /* reject all data frames */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0x00);
+
+ /* reset TSF */
+ rtw_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
+
+ /* disable update TSF */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ break;
+ case HW_VAR_MLME_SITESURVEY:
+ if (*((u8 *)val)) { /* under sitesurvey */
+ /* config RCR to receive different BSSID & not to receive data frame */
+ u32 v = rtw_read32(Adapter, REG_RCR);
+ v &= ~(RCR_CBSSID_BCN);
+ rtw_write32(Adapter, REG_RCR, v);
+ /* reject all data frame */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0x00);
+
+ /* disable update TSF */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ } else { /* sitesurvey done */
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+
+ if ((is_client_associated_to_ap(Adapter)) ||
+ ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)) {
+ /* enable to rx data frame */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
+
+ /* enable update TSF */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ } else if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
+ /* enable update TSF */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ }
+ if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
+ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
+ } else {
+ if (Adapter->in_cta_test) {
+ u32 v = rtw_read32(Adapter, REG_RCR);
+ v &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);/* RCR_ADF */
+ rtw_write32(Adapter, REG_RCR, v);
+ } else {
+ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
+ }
+ }
+ }
+ break;
+ case HW_VAR_MLME_JOIN:
+ {
+ u8 RetryLimit = 0x30;
+ u8 type = *((u8 *)val);
+ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+
+ if (type == 0) { /* prepare to join */
+ /* enable to rx data frame.Accept all data frame */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
+
+ if (Adapter->in_cta_test) {
+ u32 v = rtw_read32(Adapter, REG_RCR);
+ v &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);/* RCR_ADF */
+ rtw_write32(Adapter, REG_RCR, v);
+ } else {
+ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
+ }
+
+ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE))
+ RetryLimit = (haldata->CustomerID == RT_CID_CCX) ? 7 : 48;
+ else /* Ad-hoc Mode */
+ RetryLimit = 0x7;
+ } else if (type == 1) {
+ /* joinbss_event call back when join res < 0 */
+ rtw_write16(Adapter, REG_RXFLTMAP2, 0x00);
+ } else if (type == 2) {
+ /* sta add event call back */
+ /* enable update TSF */
+ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+
+ if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
+ RetryLimit = 0x7;
+ }
+ rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
+ }
+ break;
+ case HW_VAR_BEACON_INTERVAL:
+ rtw_write16(Adapter, REG_BCN_INTERVAL, *((u16 *)val));
+ break;
+ case HW_VAR_SLOT_TIME:
+ {
+ u8 u1bAIFS, aSifsTime;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+
+ rtw_write8(Adapter, REG_SLOT, val[0]);
+
+ if (pmlmeinfo->WMM_enable == 0) {
+ if (pmlmeext->cur_wireless_mode == WIRELESS_11B)
+ aSifsTime = 10;
+ else
+ aSifsTime = 16;
+
+ u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime);
+
+ /* <Roger_EXP> Temporary removed, 2008.06.20. */
+ rtw_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS);
+ rtw_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS);
+ rtw_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS);
+ rtw_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS);
+ }
+ }
+ break;
+ case HW_VAR_RESP_SIFS:
+ /* RESP_SIFS for CCK */
+ rtw_write8(Adapter, REG_R2T_SIFS, val[0]); /* SIFS_T2T_CCK (0x08) */
+ rtw_write8(Adapter, REG_R2T_SIFS+1, val[1]); /* SIFS_R2T_CCK(0x08) */
+ /* RESP_SIFS for OFDM */
+ rtw_write8(Adapter, REG_T2T_SIFS, val[2]); /* SIFS_T2T_OFDM (0x0a) */
+ rtw_write8(Adapter, REG_T2T_SIFS+1, val[3]); /* SIFS_R2T_OFDM(0x0a) */
+ break;
+ case HW_VAR_ACK_PREAMBLE:
+ {
+ u8 regTmp;
+ u8 bShortPreamble = *((bool *)val);
+ /* Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) */
+ regTmp = (haldata->nCur40MhzPrimeSC)<<5;
+ if (bShortPreamble)
+ regTmp |= 0x80;
+
+ rtw_write8(Adapter, REG_RRSR+2, regTmp);
+ }
+ break;
+ case HW_VAR_SEC_CFG:
+ rtw_write8(Adapter, REG_SECCFG, *((u8 *)val));
+ break;
+ case HW_VAR_DM_FLAG:
+ podmpriv->SupportAbility = *((u8 *)val);
+ break;
+ case HW_VAR_DM_FUNC_OP:
+ if (val[0])
+ podmpriv->BK_SupportAbility = podmpriv->SupportAbility;
+ else
+ podmpriv->SupportAbility = podmpriv->BK_SupportAbility;
+ break;
+ case HW_VAR_DM_FUNC_SET:
+ if (*((u32 *)val) == DYNAMIC_ALL_FUNC_ENABLE) {
+ pdmpriv->DMFlag = pdmpriv->InitDMFlag;
+ podmpriv->SupportAbility = pdmpriv->InitODMFlag;
+ } else {
+ podmpriv->SupportAbility |= *((u32 *)val);
+ }
+ break;
+ case HW_VAR_DM_FUNC_CLR:
+ podmpriv->SupportAbility &= *((u32 *)val);
+ break;
+ case HW_VAR_CAM_EMPTY_ENTRY:
+ {
+ u8 ucIndex = *((u8 *)val);
+ u8 i;
+ u32 ulCommand = 0;
+ u32 ulContent = 0;
+ u32 ulEncAlgo = CAM_AES;
+
+ for (i = 0; i < CAM_CONTENT_COUNT; i++) {
+ /* filled id in CAM config 2 byte */
+ if (i == 0)
+ ulContent |= (ucIndex & 0x03) | ((u16)(ulEncAlgo)<<2);
+ else
+ ulContent = 0;
+ /* polling bit, and No Write enable, and address */
+ ulCommand = CAM_CONTENT_COUNT*ucIndex+i;
+ ulCommand = ulCommand | CAM_POLLINIG|CAM_WRITE;
+ /* write content 0 is equall to mark invalid */
+ rtw_write32(Adapter, WCAMI, ulContent); /* delay_ms(40); */
+ rtw_write32(Adapter, RWCAM, ulCommand); /* delay_ms(40); */
+ }
+ }
+ break;
+ case HW_VAR_CAM_INVALID_ALL:
+ rtw_write32(Adapter, RWCAM, BIT(31)|BIT(30));
+ break;
+ case HW_VAR_CAM_WRITE:
+ {
+ u32 cmd;
+ u32 *cam_val = (u32 *)val;
+ rtw_write32(Adapter, WCAMI, cam_val[0]);
+
+ cmd = CAM_POLLINIG | CAM_WRITE | cam_val[1];
+ rtw_write32(Adapter, RWCAM, cmd);
+ }
+ break;
+ case HW_VAR_AC_PARAM_VO:
+ rtw_write32(Adapter, REG_EDCA_VO_PARAM, ((u32 *)(val))[0]);
+ break;
+ case HW_VAR_AC_PARAM_VI:
+ rtw_write32(Adapter, REG_EDCA_VI_PARAM, ((u32 *)(val))[0]);
+ break;
+ case HW_VAR_AC_PARAM_BE:
+ haldata->AcParam_BE = ((u32 *)(val))[0];
+ rtw_write32(Adapter, REG_EDCA_BE_PARAM, ((u32 *)(val))[0]);
+ break;
+ case HW_VAR_AC_PARAM_BK:
+ rtw_write32(Adapter, REG_EDCA_BK_PARAM, ((u32 *)(val))[0]);
+ break;
+ case HW_VAR_ACM_CTRL:
+ {
+ u8 acm_ctrl = *((u8 *)val);
+ u8 AcmCtrl = rtw_read8(Adapter, REG_ACMHWCTRL);
+
+ if (acm_ctrl > 1)
+ AcmCtrl = AcmCtrl | 0x1;
+
+ if (acm_ctrl & BIT(3))
+ AcmCtrl |= AcmHw_VoqEn;
+ else
+ AcmCtrl &= (~AcmHw_VoqEn);
+
+ if (acm_ctrl & BIT(2))
+ AcmCtrl |= AcmHw_ViqEn;
+ else
+ AcmCtrl &= (~AcmHw_ViqEn);
+
+ if (acm_ctrl & BIT(1))
+ AcmCtrl |= AcmHw_BeqEn;
+ else
+ AcmCtrl &= (~AcmHw_BeqEn);
+
+ DBG_88E("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
+ rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl);
+ }
+ break;
+ case HW_VAR_AMPDU_MIN_SPACE:
+ {
+ u8 MinSpacingToSet;
+ u8 SecMinSpace;
+
+ MinSpacingToSet = *((u8 *)val);
+ if (MinSpacingToSet <= 7) {
+ switch (Adapter->securitypriv.dot11PrivacyAlgrthm) {
+ case _NO_PRIVACY_:
+ case _AES_:
+ SecMinSpace = 0;
+ break;
+ case _WEP40_:
+ case _WEP104_:
+ case _TKIP_:
+ case _TKIP_WTMIC_:
+ SecMinSpace = 6;
+ break;
+ default:
+ SecMinSpace = 7;
+ break;
+ }
+ if (MinSpacingToSet < SecMinSpace)
+ MinSpacingToSet = SecMinSpace;
+ rtw_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
+ }
+ }
+ break;
+ case HW_VAR_AMPDU_FACTOR:
+ {
+ u8 RegToSet_Normal[4] = {0x41, 0xa8, 0x72, 0xb9};
+ u8 FactorToSet;
+ u8 *pRegToSet;
+ u8 index = 0;
+
+ pRegToSet = RegToSet_Normal; /* 0xb972a841; */
+ FactorToSet = *((u8 *)val);
+ if (FactorToSet <= 3) {
+ FactorToSet = (1<<(FactorToSet + 2));
+ if (FactorToSet > 0xf)
+ FactorToSet = 0xf;
+
+ for (index = 0; index < 4; index++) {
+ if ((pRegToSet[index] & 0xf0) > (FactorToSet<<4))
+ pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet<<4);
+
+ if ((pRegToSet[index] & 0x0f) > FactorToSet)
+ pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet);
+
+ rtw_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]);
+ }
+ }
+ }
+ break;
+ case HW_VAR_RXDMA_AGG_PG_TH:
+ {
+ u8 threshold = *((u8 *)val);
+ if (threshold == 0)
+ threshold = haldata->UsbRxAggPageCount;
+ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
+ }
+ break;
+ case HW_VAR_SET_RPWM:
+ break;
+ case HW_VAR_H2C_FW_PWRMODE:
+ {
+ u8 psmode = (*(u8 *)val);
+
+ /* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */
+ /* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */
+ if ((psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(haldata->VersionID)))
+ ODM_RF_Saving(podmpriv, true);
+ rtl8188e_set_FwPwrMode_cmd(Adapter, psmode);
+ }
+ break;
+ case HW_VAR_H2C_FW_JOINBSSRPT:
+ {
+ u8 mstatus = (*(u8 *)val);
+ rtl8188e_set_FwJoinBssReport_cmd(Adapter, mstatus);
+ }
+ break;
+#ifdef CONFIG_88EU_P2P
+ case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
+ {
+ u8 p2p_ps_state = (*(u8 *)val);
+ rtl8188e_set_p2p_ps_offload_cmd(Adapter, p2p_ps_state);
+ }
+ break;
+#endif
+ case HW_VAR_INITIAL_GAIN:
+ {
+ struct rtw_dig *pDigTable = &podmpriv->DM_DigTable;
+ u32 rx_gain = ((u32 *)(val))[0];
+
+ if (rx_gain == 0xff) {/* restore rx gain */
+ ODM_Write_DIG(podmpriv, pDigTable->BackupIGValue);
+ } else {
+ pDigTable->BackupIGValue = pDigTable->CurIGValue;
+ ODM_Write_DIG(podmpriv, rx_gain);
+ }
+ }
+ break;
+ case HW_VAR_TRIGGER_GPIO_0:
+ rtl8192cu_trigger_gpio_0(Adapter);
+ break;
+ case HW_VAR_RPT_TIMER_SETTING:
+ {
+ u16 min_rpt_time = (*(u16 *)val);
+ ODM_RA_Set_TxRPT_Time(podmpriv, min_rpt_time);
+ }
+ break;
+ case HW_VAR_ANTENNA_DIVERSITY_SELECT:
+ {
+ u8 Optimum_antenna = (*(u8 *)val);
+ u8 Ant;
+ /* switch antenna to Optimum_antenna */
+ if (haldata->CurAntenna != Optimum_antenna) {
+ Ant = (Optimum_antenna == 2) ? MAIN_ANT : AUX_ANT;
+ ODM_UpdateRxIdleAnt_88E(&haldata->odmpriv, Ant);
+
+ haldata->CurAntenna = Optimum_antenna;
+ }
+ }
+ break;
+ case HW_VAR_EFUSE_BYTES: /* To set EFUE total used bytes, added by Roger, 2008.12.22. */
+ haldata->EfuseUsedBytes = *((u16 *)val);
+ break;
+ case HW_VAR_FIFO_CLEARN_UP:
+ {
+ struct pwrctrl_priv *pwrpriv = &Adapter->pwrctrlpriv;
+ u8 trycnt = 100;
+
+ /* pause tx */
+ rtw_write8(Adapter, REG_TXPAUSE, 0xff);
+
+ /* keep sn */
+ Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter, REG_NQOS_SEQ);
+
+ if (!pwrpriv->bkeepfwalive) {
+ /* RX DMA stop */
+ rtw_write32(Adapter, REG_RXPKT_NUM, (rtw_read32(Adapter, REG_RXPKT_NUM)|RW_RELEASE_EN));
+ do {
+ if (!(rtw_read32(Adapter, REG_RXPKT_NUM)&RXDMA_IDLE))
+ break;
+ } while (trycnt--);
+ if (trycnt == 0)
+ DBG_88E("Stop RX DMA failed......\n");
+
+ /* RQPN Load 0 */
+ rtw_write16(Adapter, REG_RQPN_NPQ, 0x0);
+ rtw_write32(Adapter, REG_RQPN, 0x80000000);
+ rtw_mdelay_os(10);
+ }
+ }
+ break;
+ case HW_VAR_CHECK_TXBUF:
+ break;
+ case HW_VAR_APFM_ON_MAC:
+ haldata->bMacPwrCtrlOn = *val;
+ DBG_88E("%s: bMacPwrCtrlOn=%d\n", __func__, haldata->bMacPwrCtrlOn);
+ break;
+ case HW_VAR_TX_RPT_MAX_MACID:
+ {
+ u8 maxMacid = *val;
+ DBG_88E("### MacID(%d),Set Max Tx RPT MID(%d)\n", maxMacid, maxMacid+1);
+ rtw_write8(Adapter, REG_TX_RPT_CTRL+1, maxMacid+1);
+ }
+ break;
+ case HW_VAR_H2C_MEDIA_STATUS_RPT:
+ rtl8188e_set_FwMediaStatus_cmd(Adapter , (*(__le16 *)val));
+ break;
+ case HW_VAR_BCN_VALID:
+ /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
+ rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0);
+ break;
+ default:
+ break;
+ }
+_func_exit_;
+}
+
+static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ struct odm_dm_struct *podmpriv = &haldata->odmpriv;
+_func_enter_;
+
+ switch (variable) {
+ case HW_VAR_BASIC_RATE:
+ *((u16 *)(val)) = haldata->BasicRateSet;
+ case HW_VAR_TXPAUSE:
+ val[0] = rtw_read8(Adapter, REG_TXPAUSE);
+ break;
+ case HW_VAR_BCN_VALID:
+ /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */
+ val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2)) ? true : false;
+ break;
+ case HW_VAR_DM_FLAG:
+ val[0] = podmpriv->SupportAbility;
+ break;
+ case HW_VAR_RF_TYPE:
+ val[0] = haldata->rf_type;
+ break;
+ case HW_VAR_FWLPS_RF_ON:
+ {
+ /* When we halt NIC, we should check if FW LPS is leave. */
+ if (Adapter->pwrctrlpriv.rf_pwrstate == rf_off) {
+ /* If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave, */
+ /* because Fw is unload. */
+ val[0] = true;
+ } else {
+ u32 valRCR;
+ valRCR = rtw_read32(Adapter, REG_RCR);
+ valRCR &= 0x00070000;
+ if (valRCR)
+ val[0] = false;
+ else
+ val[0] = true;
+ }
+ }
+ break;
+ case HW_VAR_CURRENT_ANTENNA:
+ val[0] = haldata->CurAntenna;
+ break;
+ case HW_VAR_EFUSE_BYTES: /* To get EFUE total used bytes, added by Roger, 2008.12.22. */
+ *((u16 *)(val)) = haldata->EfuseUsedBytes;
+ break;
+ case HW_VAR_APFM_ON_MAC:
+ *val = haldata->bMacPwrCtrlOn;
+ break;
+ case HW_VAR_CHK_HI_QUEUE_EMPTY:
+ *val = ((rtw_read32(Adapter, REG_HGQ_INFORMATION)&0x0000ff00) == 0) ? true : false;
+ break;
+ default:
+ break;
+ }
+
+_func_exit_;
+}
+
+/* */
+/* Description: */
+/* Query setting of specified variable. */
+/* */
+static u8
+GetHalDefVar8188EUsb(
+ struct adapter *Adapter,
+ enum hal_def_variable eVariable,
+ void *pValue
+ )
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ u8 bResult = _SUCCESS;
+
+ switch (eVariable) {
+ case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB:
+ {
+ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+ struct sta_priv *pstapriv = &Adapter->stapriv;
+ struct sta_info *psta;
+ psta = rtw_get_stainfo(pstapriv, pmlmepriv->cur_network.network.MacAddress);
+ if (psta)
+ *((int *)pValue) = psta->rssi_stat.UndecoratedSmoothedPWDB;
+ }
+ break;
+ case HAL_DEF_IS_SUPPORT_ANT_DIV:
+ *((u8 *)pValue) = (haldata->AntDivCfg == 0) ? false : true;
+ break;
+ case HAL_DEF_CURRENT_ANTENNA:
+ *((u8 *)pValue) = haldata->CurAntenna;
+ break;
+ case HAL_DEF_DRVINFO_SZ:
+ *((u32 *)pValue) = DRVINFO_SZ;
+ break;
+ case HAL_DEF_MAX_RECVBUF_SZ:
+ *((u32 *)pValue) = MAX_RECVBUF_SZ;
+ break;
+ case HAL_DEF_RX_PACKET_OFFSET:
+ *((u32 *)pValue) = RXDESC_SIZE + DRVINFO_SZ;
+ break;
+ case HAL_DEF_DBG_DM_FUNC:
+ *((u32 *)pValue) = haldata->odmpriv.SupportAbility;
+ break;
+ case HAL_DEF_RA_DECISION_RATE:
+ {
+ u8 MacID = *((u8 *)pValue);
+ *((u8 *)pValue) = ODM_RA_GetDecisionRate_8188E(&(haldata->odmpriv), MacID);
+ }
+ break;
+ case HAL_DEF_RA_SGI:
+ {
+ u8 MacID = *((u8 *)pValue);
+ *((u8 *)pValue) = ODM_RA_GetShortGI_8188E(&(haldata->odmpriv), MacID);
+ }
+ break;
+ case HAL_DEF_PT_PWR_STATUS:
+ {
+ u8 MacID = *((u8 *)pValue);
+ *((u8 *)pValue) = ODM_RA_GetHwPwrStatus_8188E(&(haldata->odmpriv), MacID);
+ }
+ break;
+ case HW_VAR_MAX_RX_AMPDU_FACTOR:
+ *((u32 *)pValue) = MAX_AMPDU_FACTOR_64K;
+ break;
+ case HW_DEF_RA_INFO_DUMP:
+ {
+ u8 entry_id = *((u8 *)pValue);
+ if (check_fwstate(&Adapter->mlmepriv, _FW_LINKED)) {
+ DBG_88E("============ RA status check ===================\n");
+ DBG_88E("Mac_id:%d , RateID = %d, RAUseRate = 0x%08x, RateSGI = %d, DecisionRate = 0x%02x ,PTStage = %d\n",
+ entry_id,
+ haldata->odmpriv.RAInfo[entry_id].RateID,
+ haldata->odmpriv.RAInfo[entry_id].RAUseRate,
+ haldata->odmpriv.RAInfo[entry_id].RateSGI,
+ haldata->odmpriv.RAInfo[entry_id].DecisionRate,
+ haldata->odmpriv.RAInfo[entry_id].PTStage);
+ }
+ }
+ break;
+ case HW_DEF_ODM_DBG_FLAG:
+ {
+ struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
+ pr_info("dm_ocm->DebugComponents = 0x%llx\n", dm_ocm->DebugComponents);
+ }
+ break;
+ case HAL_DEF_DBG_DUMP_RXPKT:
+ *((u8 *)pValue) = haldata->bDumpRxPkt;
+ break;
+ case HAL_DEF_DBG_DUMP_TXPKT:
+ *((u8 *)pValue) = haldata->bDumpTxPkt;
+ break;
+ default:
+ bResult = _FAIL;
+ break;
+ }
+
+ return bResult;
+}
+
+/* */
+/* Description: */
+/* Change default setting of specified variable. */
+/* */
+static u8 SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eVariable, void *pValue)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
+ u8 bResult = _SUCCESS;
+
+ switch (eVariable) {
+ case HAL_DEF_DBG_DM_FUNC:
+ {
+ u8 dm_func = *((u8 *)pValue);
+ struct odm_dm_struct *podmpriv = &haldata->odmpriv;
+
+ if (dm_func == 0) { /* disable all dynamic func */
+ podmpriv->SupportAbility = DYNAMIC_FUNC_DISABLE;
+ DBG_88E("==> Disable all dynamic function...\n");
+ } else if (dm_func == 1) {/* disable DIG */
+ podmpriv->SupportAbility &= (~DYNAMIC_BB_DIG);
+ DBG_88E("==> Disable DIG...\n");
+ } else if (dm_func == 2) {/* disable High power */
+ podmpriv->SupportAbility &= (~DYNAMIC_BB_DYNAMIC_TXPWR);
+ } else if (dm_func == 3) {/* disable tx power tracking */
+ podmpriv->SupportAbility &= (~DYNAMIC_RF_CALIBRATION);
+ DBG_88E("==> Disable tx power tracking...\n");
+ } else if (dm_func == 5) {/* disable antenna diversity */
+ podmpriv->SupportAbility &= (~DYNAMIC_BB_ANT_DIV);
+ } else if (dm_func == 6) {/* turn on all dynamic func */
+ if (!(podmpriv->SupportAbility & DYNAMIC_BB_DIG)) {
+ struct rtw_dig *pDigTable = &podmpriv->DM_DigTable;
+ pDigTable->CurIGValue = rtw_read8(Adapter, 0xc50);
+ }
+ podmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE;
+ DBG_88E("==> Turn on all dynamic function...\n");
+ }
+ }
+ break;
+ case HAL_DEF_DBG_DUMP_RXPKT:
+ haldata->bDumpRxPkt = *((u8 *)pValue);
+ break;
+ case HAL_DEF_DBG_DUMP_TXPKT:
+ haldata->bDumpTxPkt = *((u8 *)pValue);
+ break;
+ case HW_DEF_FA_CNT_DUMP:
+ {
+ u8 bRSSIDump = *((u8 *)pValue);
+ struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
+ if (bRSSIDump)
+ dm_ocm->DebugComponents = ODM_COMP_DIG|ODM_COMP_FA_CNT ;
+ else
+ dm_ocm->DebugComponents = 0;
+ }
+ break;
+ case HW_DEF_ODM_DBG_FLAG:
+ {
+ u64 DebugComponents = *((u64 *)pValue);
+ struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
+ dm_ocm->DebugComponents = DebugComponents;
+ }
+ break;
+ default:
+ bResult = _FAIL;
+ break;
+ }
+
+ return bResult;
+}
+
+static void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
+{
+ u8 init_rate = 0;
+ u8 networkType, raid;
+ u32 mask, rate_bitmap;
+ u8 shortGIrate = false;
+ int supportRateNum = 0;
+ struct sta_info *psta;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+ struct wlan_bssid_ex *cur_network = &(pmlmeinfo->network);
+
+ if (mac_id >= NUM_STA) /* CAM_SIZE */
+ return;
+ psta = pmlmeinfo->FW_sta_info[mac_id].psta;
+ if (psta == NULL)
+ return;
+ switch (mac_id) {
+ case 0:/* for infra mode */
+ supportRateNum = rtw_get_rateset_len(cur_network->SupportedRates);
+ networkType = judge_network_type(adapt, cur_network->SupportedRates, supportRateNum) & 0xf;
+ raid = networktype_to_raid(networkType);
+ mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
+ mask |= (pmlmeinfo->HT_enable) ? update_MSC_rate(&(pmlmeinfo->HT_caps)) : 0;
+ if (support_short_GI(adapt, &(pmlmeinfo->HT_caps)))
+ shortGIrate = true;
+ break;
+ case 1:/* for broadcast/multicast */
+ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
+ if (pmlmeext->cur_wireless_mode & WIRELESS_11B)
+ networkType = WIRELESS_11B;
+ else
+ networkType = WIRELESS_11G;
+ raid = networktype_to_raid(networkType);
+ mask = update_basic_rate(cur_network->SupportedRates, supportRateNum);
+ break;
+ default: /* for each sta in IBSS */
+ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
+ networkType = judge_network_type(adapt, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) & 0xf;
+ raid = networktype_to_raid(networkType);
+ mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
+
+ /* todo: support HT in IBSS */
+ break;
+ }
+
+ rate_bitmap = 0x0fffffff;
+ rate_bitmap = ODM_Get_Rate_Bitmap(&haldata->odmpriv, mac_id, mask, rssi_level);
+ DBG_88E("%s => mac_id:%d, networkType:0x%02x, mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n",
+ __func__, mac_id, networkType, mask, rssi_level, rate_bitmap);
+
+ mask &= rate_bitmap;
+
+ init_rate = get_highest_rate_idx(mask)&0x3f;
+
+ if (haldata->fw_ractrl) {
+ u8 arg;
+
+ arg = mac_id & 0x1f;/* MACID */
+ arg |= BIT(7);
+ if (shortGIrate)
+ arg |= BIT(5);
+ mask |= ((raid << 28) & 0xf0000000);
+ DBG_88E("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg);
+ psta->ra_mask = mask;
+ mask |= ((raid << 28) & 0xf0000000);
+
+ /* to do ,for 8188E-SMIC */
+ rtl8188e_set_raid_cmd(adapt, mask);
+ } else {
+ ODM_RA_UpdateRateInfo_8188E(&(haldata->odmpriv),
+ mac_id,
+ raid,
+ mask,
+ shortGIrate
+ );
+ }
+ /* set ra_id */
+ psta->raid = raid;
+ psta->init_rate = init_rate;
+}
+
+static void SetBeaconRelatedRegisters8188EUsb(struct adapter *adapt)
+{
+ u32 value32;
+ struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+ u32 bcn_ctrl_reg = REG_BCN_CTRL;
+ /* reset TSF, enable update TSF, correcting TSF On Beacon */
+
+ /* BCN interval */
+ rtw_write16(adapt, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
+ rtw_write8(adapt, REG_ATIMWND, 0x02);/* 2ms */
+
+ _InitBeaconParameters(adapt);
+
+ rtw_write8(adapt, REG_SLOT, 0x09);
+
+ value32 = rtw_read32(adapt, REG_TCR);
+ value32 &= ~TSFRST;
+ rtw_write32(adapt, REG_TCR, value32);
+
+ value32 |= TSFRST;
+ rtw_write32(adapt, REG_TCR, value32);
+
+ /* NOTE: Fix test chip's bug (about contention windows's randomness) */
+ rtw_write8(adapt, REG_RXTSF_OFFSET_CCK, 0x50);
+ rtw_write8(adapt, REG_RXTSF_OFFSET_OFDM, 0x50);
+
+ _BeaconFunctionEnable(adapt, true, true);
+
+ ResumeTxBeacon(adapt);
+
+ rtw_write8(adapt, bcn_ctrl_reg, rtw_read8(adapt, bcn_ctrl_reg)|BIT(1));
+}
+
+static void rtl8188eu_init_default_value(struct adapter *adapt)
+{
+ struct hal_data_8188e *haldata;
+ struct pwrctrl_priv *pwrctrlpriv;
+ u8 i;
+
+ haldata = GET_HAL_DATA(adapt);
+ pwrctrlpriv = &adapt->pwrctrlpriv;
+
+ /* init default value */
+ haldata->fw_ractrl = false;
+ if (!pwrctrlpriv->bkeepfwalive)
+ haldata->LastHMEBoxNum = 0;
+
+ /* init dm default value */
+ haldata->odmpriv.RFCalibrateInfo.bIQKInitialized = false;
+ haldata->odmpriv.RFCalibrateInfo.TM_Trigger = 0;/* for IQK */
+ haldata->pwrGroupCnt = 0;
+ haldata->PGMaxGroup = 13;
+ haldata->odmpriv.RFCalibrateInfo.ThermalValue_HP_index = 0;
+ for (i = 0; i < HP_THERMAL_NUM; i++)
+ haldata->odmpriv.RFCalibrateInfo.ThermalValue_HP[i] = 0;
+}
+
+static u8 rtl8188eu_ps_func(struct adapter *Adapter, enum hal_intf_ps_func efunc_id, u8 *val)
+{
+ u8 bResult = true;
+ return bResult;
+}
+
+void rtl8188eu_set_hal_ops(struct adapter *adapt)
+{
+ struct hal_ops *halfunc = &adapt->HalFunc;
+
+_func_enter_;
+
+ adapt->HalData = rtw_zmalloc(sizeof(struct hal_data_8188e));
+ if (adapt->HalData == NULL)
+ DBG_88E("cant not alloc memory for HAL DATA\n");
+ adapt->hal_data_sz = sizeof(struct hal_data_8188e);
+
+ halfunc->hal_power_on = rtl8188eu_InitPowerOn;
+ halfunc->hal_init = &rtl8188eu_hal_init;
+ halfunc->hal_deinit = &rtl8188eu_hal_deinit;
+
+ halfunc->inirp_init = &rtl8188eu_inirp_init;
+ halfunc->inirp_deinit = &rtl8188eu_inirp_deinit;
+
+ halfunc->init_xmit_priv = &rtl8188eu_init_xmit_priv;
+ halfunc->free_xmit_priv = &rtl8188eu_free_xmit_priv;
+
+ halfunc->init_recv_priv = &rtl8188eu_init_recv_priv;
+ halfunc->free_recv_priv = &rtl8188eu_free_recv_priv;
+ halfunc->InitSwLeds = &rtl8188eu_InitSwLeds;
+ halfunc->DeInitSwLeds = &rtl8188eu_DeInitSwLeds;
+
+ halfunc->init_default_value = &rtl8188eu_init_default_value;
+ halfunc->intf_chip_configure = &rtl8188eu_interface_configure;
+ halfunc->read_adapter_info = &ReadAdapterInfo8188EU;
+
+ halfunc->SetHwRegHandler = &SetHwReg8188EU;
+ halfunc->GetHwRegHandler = &GetHwReg8188EU;
+ halfunc->GetHalDefVarHandler = &GetHalDefVar8188EUsb;
+ halfunc->SetHalDefVarHandler = &SetHalDefVar8188EUsb;
+
+ halfunc->UpdateRAMaskHandler = &UpdateHalRAMask8188EUsb;
+ halfunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188EUsb;
+
+ halfunc->hal_xmit = &rtl8188eu_hal_xmit;
+ halfunc->mgnt_xmit = &rtl8188eu_mgnt_xmit;
+
+ halfunc->interface_ps_func = &rtl8188eu_ps_func;
+
+ rtl8188e_set_hal_ops(halfunc);
+_func_exit_;
+}
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _HCI_OPS_OS_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <osdep_intf.h>
+#include <usb_ops.h>
+#include <recv_osdep.h>
+#include <rtl8188e_hal.h>
+
+static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype)
+{
+ struct adapter *adapt = pintfhdl->padapter;
+ struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
+ struct usb_device *udev = dvobjpriv->pusbdev;
+ unsigned int pipe;
+ int status = 0;
+ u8 reqtype;
+ u8 *pIo_buf;
+ int vendorreq_times = 0;
+
+ if ((adapt->bSurpriseRemoved) || (adapt->pwrctrlpriv.pnp_bstop_trx)) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usbctrl_vendorreq:(adapt->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
+ status = -EPERM;
+ goto exit;
+ }
+
+ if (len > MAX_VENDOR_REQ_CMD_SIZE) {
+ DBG_88E("[%s] Buffer len error ,vendor request failed\n", __func__);
+ status = -EINVAL;
+ goto exit;
+ }
+
+ _enter_critical_mutex(&dvobjpriv->usb_vendor_req_mutex, NULL);
+
+ /* Acquire IO memory for vendorreq */
+ pIo_buf = dvobjpriv->usb_vendor_req_buf;
+
+ if (pIo_buf == NULL) {
+ DBG_88E("[%s] pIo_buf == NULL\n", __func__);
+ status = -ENOMEM;
+ goto release_mutex;
+ }
+
+ while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
+ _rtw_memset(pIo_buf, 0, len);
+
+ if (requesttype == 0x01) {
+ pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
+ reqtype = REALTEK_USB_VENQT_READ;
+ } else {
+ pipe = usb_sndctrlpipe(udev, 0);/* write_out */
+ reqtype = REALTEK_USB_VENQT_WRITE;
+ memcpy(pIo_buf, pdata, len);
+ }
+
+ status = rtw_usb_control_msg(udev, pipe, request, reqtype, value, index, pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
+
+ if (status == len) { /* Success this control transfer. */
+ rtw_reset_continual_urb_error(dvobjpriv);
+ if (requesttype == 0x01)
+ memcpy(pdata, pIo_buf, len);
+ } else { /* error cases */
+ DBG_88E("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n",
+ value, (requesttype == 0x01) ? "read" : "write",
+ len, status, *(u32 *)pdata, vendorreq_times);
+
+ if (status < 0) {
+ if (status == (-ESHUTDOWN) || status == -ENODEV) {
+ adapt->bSurpriseRemoved = true;
+ } else {
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ haldata->srestpriv.Wifi_Error_Status = USB_VEN_REQ_CMD_FAIL;
+ }
+ } else { /* status != len && status >= 0 */
+ if (status > 0) {
+ if (requesttype == 0x01) {
+ /* For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
+ memcpy(pdata, pIo_buf, len);
+ }
+ }
+ }
+
+ if (rtw_inc_and_chk_continual_urb_error(dvobjpriv)) {
+ adapt->bSurpriseRemoved = true;
+ break;
+ }
+
+ }
+
+ /* firmware download is checksumed, don't retry */
+ if ((value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS) || status == len)
+ break;
+ }
+release_mutex:
+ _exit_critical_mutex(&dvobjpriv->usb_vendor_req_mutex, NULL);
+exit:
+ return status;
+}
+
+static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ u8 data = 0;
+
+ _func_enter_;
+
+ request = 0x05;
+ requesttype = 0x01;/* read_in */
+ index = 0;/* n/a */
+
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 1;
+
+ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+
+ _func_exit_;
+
+ return data;
+
+}
+
+static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ __le32 data;
+
+_func_enter_;
+ request = 0x05;
+ requesttype = 0x01;/* read_in */
+ index = 0;/* n/a */
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 2;
+ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+_func_exit_;
+
+ return (u16)(le32_to_cpu(data)&0xffff);
+}
+
+static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ __le32 data;
+
+_func_enter_;
+
+ request = 0x05;
+ requesttype = 0x01;/* read_in */
+ index = 0;/* n/a */
+
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 4;
+
+ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+
+_func_exit_;
+
+ return le32_to_cpu(data);
+}
+
+static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ u8 data;
+ int ret;
+
+ _func_enter_;
+ request = 0x05;
+ requesttype = 0x00;/* write_out */
+ index = 0;/* n/a */
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 1;
+ data = val;
+ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+ _func_exit_;
+ return ret;
+}
+
+static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ __le32 data;
+ int ret;
+
+ _func_enter_;
+
+ request = 0x05;
+ requesttype = 0x00;/* write_out */
+ index = 0;/* n/a */
+
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 2;
+
+ data = cpu_to_le32(val & 0x0000ffff);
+
+ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+
+ _func_exit_;
+
+ return ret;
+}
+
+static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ __le32 data;
+ int ret;
+
+ _func_enter_;
+
+ request = 0x05;
+ requesttype = 0x00;/* write_out */
+ index = 0;/* n/a */
+
+ wvalue = (u16)(addr&0x0000ffff);
+ len = 4;
+ data = cpu_to_le32(val);
+
+ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
+
+ _func_exit_;
+
+ return ret;
+}
+
+static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
+{
+ u8 request;
+ u8 requesttype;
+ u16 wvalue;
+ u16 index;
+ u16 len;
+ u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
+ int ret;
+
+ _func_enter_;
+
+ request = 0x05;
+ requesttype = 0x00;/* write_out */
+ index = 0;/* n/a */
+
+ wvalue = (u16)(addr&0x0000ffff);
+ len = length;
+ memcpy(buf, pdata, len);
+
+ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, buf, len, requesttype);
+
+ _func_exit_;
+
+ return ret;
+}
+
+static void interrupt_handler_8188eu(struct adapter *adapt, u16 pkt_len, u8 *pbuf)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+
+ if (pkt_len != INTERRUPT_MSG_FORMAT_LEN) {
+ DBG_88E("%s Invalid interrupt content length (%d)!\n", __func__, pkt_len);
+ return;
+ }
+
+ /* HISR */
+ memcpy(&(haldata->IntArray[0]), &(pbuf[USB_INTR_CONTENT_HISR_OFFSET]), 4);
+ memcpy(&(haldata->IntArray[1]), &(pbuf[USB_INTR_CONTENT_HISRE_OFFSET]), 4);
+
+ /* C2H Event */
+ if (pbuf[0] != 0)
+ memcpy(&(haldata->C2hArray[0]), &(pbuf[USB_INTR_CONTENT_C2H_OFFSET]), 16);
+}
+
+static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
+{
+ u8 *pbuf;
+ u8 shift_sz = 0;
+ u16 pkt_cnt;
+ u32 pkt_offset, skb_len, alloc_sz;
+ s32 transfer_len;
+ struct recv_stat *prxstat;
+ struct phy_stat *pphy_status = NULL;
+ struct sk_buff *pkt_copy = NULL;
+ union recv_frame *precvframe = NULL;
+ struct rx_pkt_attrib *pattrib = NULL;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct recv_priv *precvpriv = &adapt->recvpriv;
+ struct __queue *pfree_recv_queue = &precvpriv->free_recv_queue;
+
+ transfer_len = (s32)pskb->len;
+ pbuf = pskb->data;
+
+ prxstat = (struct recv_stat *)pbuf;
+ pkt_cnt = (le32_to_cpu(prxstat->rxdw2) >> 16) & 0xff;
+
+ do {
+ RT_TRACE(_module_rtl871x_recv_c_, _drv_info_,
+ ("recvbuf2recvframe: rxdesc=offsset 0:0x%08x, 4:0x%08x, 8:0x%08x, C:0x%08x\n",
+ prxstat->rxdw0, prxstat->rxdw1, prxstat->rxdw2, prxstat->rxdw4));
+
+ prxstat = (struct recv_stat *)pbuf;
+
+ precvframe = rtw_alloc_recvframe(pfree_recv_queue);
+ if (precvframe == NULL) {
+ RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("recvbuf2recvframe: precvframe==NULL\n"));
+ DBG_88E("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __func__, __LINE__);
+ goto _exit_recvbuf2recvframe;
+ }
+
+ _rtw_init_listhead(&precvframe->u.hdr.list);
+ precvframe->u.hdr.precvbuf = NULL; /* can't access the precvbuf for new arch. */
+ precvframe->u.hdr.len = 0;
+
+ update_recvframe_attrib_88e(precvframe, prxstat);
+
+ pattrib = &precvframe->u.hdr.attrib;
+
+ if ((pattrib->crc_err) || (pattrib->icv_err)) {
+ DBG_88E("%s: RX Warning! crc_err=%d icv_err=%d, skip!\n", __func__, pattrib->crc_err, pattrib->icv_err);
+
+ rtw_free_recvframe(precvframe, pfree_recv_queue);
+ goto _exit_recvbuf2recvframe;
+ }
+
+ if ((pattrib->physt) && (pattrib->pkt_rpt_type == NORMAL_RX))
+ pphy_status = (struct phy_stat *)(pbuf + RXDESC_OFFSET);
+
+ pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;
+
+ if ((pattrib->pkt_len <= 0) || (pkt_offset > transfer_len)) {
+ RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("recvbuf2recvframe: pkt_len<=0\n"));
+ DBG_88E("%s()-%d: RX Warning!,pkt_len<=0 or pkt_offset> transfoer_len\n", __func__, __LINE__);
+ rtw_free_recvframe(precvframe, pfree_recv_queue);
+ goto _exit_recvbuf2recvframe;
+ }
+
+ /* Modified by Albert 20101213 */
+ /* For 8 bytes IP header alignment. */
+ if (pattrib->qos) /* Qos data, wireless lan header length is 26 */
+ shift_sz = 6;
+ else
+ shift_sz = 0;
+
+ skb_len = pattrib->pkt_len;
+
+ /* for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet. */
+ /* modify alloc_sz for recvive crc error packet by thomas 2011-06-02 */
+ if ((pattrib->mfrag == 1) && (pattrib->frag_num == 0)) {
+ if (skb_len <= 1650)
+ alloc_sz = 1664;
+ else
+ alloc_sz = skb_len + 14;
+ } else {
+ alloc_sz = skb_len;
+ /* 6 is for IP header 8 bytes alignment in QoS packet case. */
+ /* 8 is for skb->data 4 bytes alignment. */
+ alloc_sz += 14;
+ }
+
+ pkt_copy = netdev_alloc_skb(adapt->pnetdev, alloc_sz);
+ if (pkt_copy) {
+ pkt_copy->dev = adapt->pnetdev;
+ precvframe->u.hdr.pkt = pkt_copy;
+ precvframe->u.hdr.rx_head = pkt_copy->data;
+ precvframe->u.hdr.rx_end = pkt_copy->data + alloc_sz;
+ skb_reserve(pkt_copy, 8 - ((size_t)(pkt_copy->data) & 7));/* force pkt_copy->data at 8-byte alignment address */
+ skb_reserve(pkt_copy, shift_sz);/* force ip_hdr at 8-byte alignment address according to shift_sz. */
+ memcpy(pkt_copy->data, (pbuf + pattrib->drvinfo_sz + RXDESC_SIZE), skb_len);
+ precvframe->u.hdr.rx_tail = pkt_copy->data;
+ precvframe->u.hdr.rx_data = pkt_copy->data;
+ } else {
+ if ((pattrib->mfrag == 1) && (pattrib->frag_num == 0)) {
+ DBG_88E("recvbuf2recvframe: alloc_skb fail , drop frag frame\n");
+ rtw_free_recvframe(precvframe, pfree_recv_queue);
+ goto _exit_recvbuf2recvframe;
+ }
+ precvframe->u.hdr.pkt = skb_clone(pskb, GFP_ATOMIC);
+ if (precvframe->u.hdr.pkt) {
+ precvframe->u.hdr.rx_tail = pbuf + pattrib->drvinfo_sz + RXDESC_SIZE;
+ precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_tail;
+ precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail;
+ precvframe->u.hdr.rx_end = pbuf + pattrib->drvinfo_sz + RXDESC_SIZE + alloc_sz;
+ } else {
+ DBG_88E("recvbuf2recvframe: skb_clone fail\n");
+ rtw_free_recvframe(precvframe, pfree_recv_queue);
+ goto _exit_recvbuf2recvframe;
+ }
+ }
+
+ recvframe_put(precvframe, skb_len);
+
+ switch (haldata->UsbRxAggMode) {
+ case USB_RX_AGG_DMA:
+ case USB_RX_AGG_MIX:
+ pkt_offset = (u16)_RND128(pkt_offset);
+ break;
+ case USB_RX_AGG_USB:
+ pkt_offset = (u16)_RND4(pkt_offset);
+ break;
+ case USB_RX_AGG_DISABLE:
+ default:
+ break;
+ }
+ if (pattrib->pkt_rpt_type == NORMAL_RX) { /* Normal rx packet */
+ if (pattrib->physt)
+ update_recvframe_phyinfo_88e(precvframe, (struct phy_stat *)pphy_status);
+ if (rtw_recv_entry(precvframe) != _SUCCESS) {
+ RT_TRACE(_module_rtl871x_recv_c_, _drv_err_,
+ ("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
+ }
+ } else {
+ /* enqueue recvframe to txrtp queue */
+ if (pattrib->pkt_rpt_type == TX_REPORT1) {
+ /* CCX-TXRPT ack for xmit mgmt frames. */
+ handle_txrpt_ccx_88e(adapt, precvframe->u.hdr.rx_data);
+ } else if (pattrib->pkt_rpt_type == TX_REPORT2) {
+ ODM_RA_TxRPT2Handle_8188E(
+ &haldata->odmpriv,
+ precvframe->u.hdr.rx_data,
+ pattrib->pkt_len,
+ pattrib->MacIDValidEntry[0],
+ pattrib->MacIDValidEntry[1]
+ );
+ } else if (pattrib->pkt_rpt_type == HIS_REPORT) {
+ interrupt_handler_8188eu(adapt, pattrib->pkt_len, precvframe->u.hdr.rx_data);
+ }
+ rtw_free_recvframe(precvframe, pfree_recv_queue);
+ }
+ pkt_cnt--;
+ transfer_len -= pkt_offset;
+ pbuf += pkt_offset;
+ precvframe = NULL;
+ pkt_copy = NULL;
+
+ if (transfer_len > 0 && pkt_cnt == 0)
+ pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff;
+
+ } while ((transfer_len > 0) && (pkt_cnt > 0));
+
+_exit_recvbuf2recvframe:
+
+ return _SUCCESS;
+}
+
+void rtl8188eu_recv_tasklet(void *priv)
+{
+ struct sk_buff *pskb;
+ struct adapter *adapt = (struct adapter *)priv;
+ struct recv_priv *precvpriv = &adapt->recvpriv;
+
+ while (NULL != (pskb = skb_dequeue(&precvpriv->rx_skb_queue))) {
+ if ((adapt->bDriverStopped) || (adapt->bSurpriseRemoved)) {
+ DBG_88E("recv_tasklet => bDriverStopped or bSurpriseRemoved\n");
+ dev_kfree_skb_any(pskb);
+ break;
+ }
+ recvbuf2recvframe(adapt, pskb);
+ skb_reset_tail_pointer(pskb);
+ pskb->len = 0;
+ skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+ }
+}
+
+static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
+{
+ struct recv_buf *precvbuf = (struct recv_buf *)purb->context;
+ struct adapter *adapt = (struct adapter *)precvbuf->adapter;
+ struct recv_priv *precvpriv = &adapt->recvpriv;
+
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete!!!\n"));
+
+ precvpriv->rx_pending_cnt--;
+
+ if (adapt->bSurpriseRemoved || adapt->bDriverStopped || adapt->bReadPortCancel) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+ ("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n",
+ adapt->bDriverStopped, adapt->bSurpriseRemoved));
+
+ precvbuf->reuse = true;
+ DBG_88E("%s() RX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bReadPortCancel(%d)\n",
+ __func__, adapt->bDriverStopped,
+ adapt->bSurpriseRemoved, adapt->bReadPortCancel);
+ goto exit;
+ }
+
+ if (purb->status == 0) { /* SUCCESS */
+ if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+ ("usb_read_port_complete: (purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)\n"));
+ precvbuf->reuse = true;
+ rtw_read_port(adapt, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
+ DBG_88E("%s()-%d: RX Warning!\n", __func__, __LINE__);
+ } else {
+ rtw_reset_continual_urb_error(adapter_to_dvobj(adapt));
+
+ precvbuf->transfer_len = purb->actual_length;
+ skb_put(precvbuf->pskb, purb->actual_length);
+ skb_queue_tail(&precvpriv->rx_skb_queue, precvbuf->pskb);
+
+ if (skb_queue_len(&precvpriv->rx_skb_queue) <= 1)
+ tasklet_schedule(&precvpriv->recv_tasklet);
+
+ precvbuf->pskb = NULL;
+ precvbuf->reuse = false;
+ rtw_read_port(adapt, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
+ }
+ } else {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete : purb->status(%d) != 0\n", purb->status));
+
+ DBG_88E("###=> usb_read_port_complete => urb status(%d)\n", purb->status);
+
+ if (rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(adapt)))
+ adapt->bSurpriseRemoved = true;
+
+ switch (purb->status) {
+ case -EINVAL:
+ case -EPIPE:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete:bSurpriseRemoved=true\n"));
+ case -ENOENT:
+ adapt->bDriverStopped = true;
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete:bDriverStopped=true\n"));
+ break;
+ case -EPROTO:
+ case -EOVERFLOW:
+ {
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ haldata->srestpriv.Wifi_Error_Status = USB_READ_PORT_FAIL;
+ }
+ precvbuf->reuse = true;
+ rtw_read_port(adapt, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
+ break;
+ case -EINPROGRESS:
+ DBG_88E("ERROR: URB IS IN PROGRESS!/n");
+ break;
+ default:
+ break;
+ }
+ }
+
+exit:
+_func_exit_;
+}
+
+static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
+{
+ struct urb *purb = NULL;
+ struct recv_buf *precvbuf = (struct recv_buf *)rmem;
+ struct adapter *adapter = pintfhdl->padapter;
+ struct dvobj_priv *pdvobj = adapter_to_dvobj(adapter);
+ struct recv_priv *precvpriv = &adapter->recvpriv;
+ struct usb_device *pusbd = pdvobj->pusbdev;
+ int err;
+ unsigned int pipe;
+ size_t tmpaddr = 0;
+ size_t alignment = 0;
+ u32 ret = _SUCCESS;
+
+_func_enter_;
+
+ if (adapter->bDriverStopped || adapter->bSurpriseRemoved ||
+ adapter->pwrctrlpriv.pnp_bstop_trx) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+ ("usb_read_port:(adapt->bDriverStopped ||adapt->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
+ return _FAIL;
+ }
+
+ if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
+ precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue);
+ if (NULL != precvbuf->pskb)
+ precvbuf->reuse = true;
+ }
+
+ if (precvbuf != NULL) {
+ rtl8188eu_init_recvbuf(adapter, precvbuf);
+
+ /* re-assign for linux based on skb */
+ if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
+ precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
+ if (precvbuf->pskb == NULL) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("init_recvbuf(): alloc_skb fail!\n"));
+ DBG_88E("#### usb_read_port() alloc_skb fail!#####\n");
+ return _FAIL;
+ }
+
+ tmpaddr = (size_t)precvbuf->pskb->data;
+ alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
+ skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
+
+ precvbuf->phead = precvbuf->pskb->head;
+ precvbuf->pdata = precvbuf->pskb->data;
+ precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
+ precvbuf->pend = skb_end_pointer(precvbuf->pskb);
+ precvbuf->pbuf = precvbuf->pskb->data;
+ } else { /* reuse skb */
+ precvbuf->phead = precvbuf->pskb->head;
+ precvbuf->pdata = precvbuf->pskb->data;
+ precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
+ precvbuf->pend = skb_end_pointer(precvbuf->pskb);
+ precvbuf->pbuf = precvbuf->pskb->data;
+
+ precvbuf->reuse = false;
+ }
+
+ precvpriv->rx_pending_cnt++;
+
+ purb = precvbuf->purb;
+
+ /* translate DMA FIFO addr to pipehandle */
+ pipe = ffaddr2pipehdl(pdvobj, addr);
+
+ usb_fill_bulk_urb(purb, pusbd, pipe,
+ precvbuf->pbuf,
+ MAX_RECVBUF_SZ,
+ usb_read_port_complete,
+ precvbuf);/* context is precvbuf */
+
+ err = usb_submit_urb(purb, GFP_ATOMIC);
+ if ((err) && (err != (-EPERM))) {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+ ("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x",
+ err, purb->status));
+ DBG_88E("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",
+ err, purb->status);
+ ret = _FAIL;
+ }
+ } else {
+ RT_TRACE(_module_hci_ops_os_c_, _drv_err_,
+ ("usb_read_port:precvbuf ==NULL\n"));
+ ret = _FAIL;
+ }
+
+_func_exit_;
+ return ret;
+}
+
+void rtl8188eu_xmit_tasklet(void *priv)
+{
+ int ret = false;
+ struct adapter *adapt = (struct adapter *)priv;
+ struct xmit_priv *pxmitpriv = &adapt->xmitpriv;
+
+ if (check_fwstate(&adapt->mlmepriv, _FW_UNDER_SURVEY))
+ return;
+
+ while (1) {
+ if ((adapt->bDriverStopped) ||
+ (adapt->bSurpriseRemoved) ||
+ (adapt->bWritePortCancel)) {
+ DBG_88E("xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel\n");
+ break;
+ }
+
+ ret = rtl8188eu_xmitframe_complete(adapt, pxmitpriv, NULL);
+
+ if (!ret)
+ break;
+ }
+}
+
+void rtl8188eu_set_intf_ops(struct _io_ops *pops)
+{
+ _func_enter_;
+ _rtw_memset((u8 *)pops, 0, sizeof(struct _io_ops));
+ pops->_read8 = &usb_read8;
+ pops->_read16 = &usb_read16;
+ pops->_read32 = &usb_read32;
+ pops->_read_mem = &usb_read_mem;
+ pops->_read_port = &usb_read_port;
+ pops->_write8 = &usb_write8;
+ pops->_write16 = &usb_write16;
+ pops->_write32 = &usb_write32;
+ pops->_writeN = &usb_writeN;
+ pops->_write_mem = &usb_write_mem;
+ pops->_write_port = &usb_write_port;
+ pops->_read_port_cancel = &usb_read_port_cancel;
+ pops->_write_port_cancel = &usb_write_port_cancel;
+ _func_exit_;
+}
+
+void rtl8188eu_set_hw_type(struct adapter *adapt)
+{
+ adapt->chip_type = RTL8188E;
+ adapt->HardwareType = HARDWARE_TYPE_RTL8188EU;
+ DBG_88E("CHIP TYPE: RTL8188E\n");
+}
projects / platform / kernel / linux-exynos.git / commitdiff