MIPS: Netlogic: Some cleanups for assembly code

No change in logic, the changes are:
* cleanup some whitespace and comments
* remove confusing argument of SYS_CPU_COHERENT_BASE macro
* make the numerical labels in macros consistent

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6273/

diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
index adb1828..06381e1 100644 (file)
--- a/arch/mips/netlogic/common/reset.S
+++ b/arch/mips/netlogic/common/reset.S
@@ -50,8 +50,8 @@
 #include <asm/netlogic/xlp-hal/cpucontrol.h>
 
 #define CP0_EBASE      $15
-#define SYS_CPU_COHERENT_BASE(node)    CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
-                       XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+#define SYS_CPU_COHERENT_BASE  CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+                       XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
                        SYS_CPU_NONCOHERENT_MODE * 4
 
 /* Enable XLP features and workarounds in the LSU */
@@ -82,26 +82,26 @@
        li      t1, LSU_DEBUG_ADDR
        li      t2, 0           /* index */
        li      t3, 0x1000      /* loop count */
-1:
+11:
        sll     v0, t2, 5
        mtcr    zero, t0
        ori     v1, v0, 0x3     /* way0 | write_enable | write_active */
        mtcr    v1, t1
-2:
+12:
        mfcr    v1, t1
        andi    v1, 0x1         /* wait for write_active == 0 */
-       bnez    v1, 2b
+       bnez    v1, 12b
        nop
        mtcr    zero, t0
        ori     v1, v0, 0x7     /* way1 | write_enable | write_active */
        mtcr    v1, t1
-3:
+13:
        mfcr    v1, t1
        andi    v1, 0x1         /* wait for write_active == 0 */
-       bnez    v1, 3b
+       bnez    v1, 13b
        nop
        addi    t2, 1
-       bne     t3, t2, 1b
+       bne     t3, t2, 11b
        nop
 .endm
 
@@ -149,7 +149,7 @@ FEXPORT(nlm_reset_entry)
        li      t1, 0x1
        sll     t0, t1, t0
        nor     t0, t0, zero            /* t0 <- ~(1 << core) */
-       li      t2, SYS_CPU_COHERENT_BASE(0)
+       li      t2, SYS_CPU_COHERENT_BASE
        add     t2, t2, t3              /* t2 <- SYS offset for node */
        lw      t1, 0(t2)
        and     t1, t1, t0
@@ -164,8 +164,7 @@ FEXPORT(nlm_reset_entry)
        /* FALL THROUGH */
 
 /*
- * Wake up sibling threads from the initial thread in
- * a core.
+ * Wake up sibling threads from the initial thread in a core.
  */
 EXPORT(nlm_boot_siblings)
        /* core L1D flush before enable threads */
@@ -181,8 +180,10 @@ EXPORT(nlm_boot_siblings)
        /*
         * The new hardware thread starts at the next instruction
         * For all the cases other than core 0 thread 0, we will
-       * jump to the secondary wait function.
-       */
+        * jump to the secondary wait function.
+
+        * NOTE: All GPR contents are lost after the mtcr above!
+        */
        mfc0    v0, CP0_EBASE, 1
        andi    v0, 0x3ff               /* v0 <- node/core */
 
@@ -196,7 +197,7 @@ EXPORT(nlm_boot_siblings)
 #endif
        mtc0    t1, CP0_STATUS
 
-       /* mark CPU ready, careful here, previous mtcr trashed registers */
+       /* mark CPU ready */
        li      t3, CKSEG1ADDR(RESET_DATA_PHYS)
        ADDIU   t1, t3, BOOT_CPU_READY
        sll     v1, v0, 2

diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index aa6cff0..db3b894 100644 (file)
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -98,7 +98,7 @@ END(nlm_boot_secondary_cpus)
  * In case of RMIboot bootloader which is used on XLR boards, the CPUs
  * be already woken up and waiting in bootloader code.
  * This will get them out of the bootloader code and into linux. Needed
- *  because the bootloader area will be taken and initialized by linux.
+ * because the bootloader area will be taken and initialized by linux.
  */
 NESTED(nlm_rmiboot_preboot, 16, sp)
        mfc0    t0, $15, 1      /* read ebase */
@@ -133,6 +133,7 @@ NESTED(nlm_rmiboot_preboot, 16, sp)
        or      t1, t2, v1      /* put in new value */
        mtcr    t1, t0          /* update core control */
 
+       /* wait for NMI to hit */
 1:     wait
        b       1b
        nop