igb: Cleanups to fix braces location warnings

This patch fixes WARNING:BRACES and ERROR:OPEN_BRACE from
checkpatch file check.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 7b7d08c..b1a759c 100644 (file)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -73,9 +73,8 @@ static s32  igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
 static s32  igb_update_nvm_checksum_82580(struct e1000_hw *hw);
 static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
 static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
-static const u16 e1000_82580_rxpbs_table[] =
-       { 36, 72, 144, 1, 2, 4, 8, 16,
-         35, 70, 140 };
+static const u16 e1000_82580_rxpbs_table[] = {
+       36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
 
 /**
  *  igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
@@ -1436,9 +1435,8 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw)
 
        /* set the completion timeout for interface */
        ret_val = igb_set_pcie_completion_timeout(hw);
-       if (ret_val) {
+       if (ret_val)
                hw_dbg("PCI-E Set completion timeout has failed.\n");
-       }
 
        hw_dbg("Masking off all interrupts\n");
        wr32(E1000_IMC, 0xffffffff);

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index e5570ac..1615226 100644 (file)
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -1196,8 +1196,8 @@ static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
 {
        struct e1000_hw *hw = &adapter->hw;
        u32 pat, val;
-       static const u32 _test[] =
-               {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+       static const u32 _test[] = {
+               0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
        for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
                wr32(reg, (_test[pat] & write));
                val = rd32(reg) & mask;

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 13edca9..e6e4f4b 100644 (file)
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4235,9 +4235,8 @@ static void igb_watchdog_task(struct work_struct *work)
 
                        /* check for thermal sensor event */
                        if (igb_thermal_sensor_event(hw,
-                           E1000_THSTAT_LINK_THROTTLE)) {
+                           E1000_THSTAT_LINK_THROTTLE))
                                netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
-                       }
 
                        /* adjust timeout factor according to speed/duplex */
                        adapter->tx_timeout_factor = 1;
@@ -4473,13 +4472,12 @@ static void igb_update_itr(struct igb_q_vector *q_vector,
        case low_latency:  /* 50 usec aka 20000 ints/s */
                if (bytes > 10000) {
                        /* this if handles the TSO accounting */
-                       if (bytes/packets > 8000) {
+                       if (bytes/packets > 8000)
                                itrval = bulk_latency;
-                       } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+                       else if ((packets < 10) || ((bytes/packets) > 1200))
                                itrval = bulk_latency;
-                       } else if ((packets > 35)) {
+                       else if ((packets > 35))
                                itrval = lowest_latency;
-                       }
                } else if (bytes/packets > 2000) {
                        itrval = bulk_latency;
                } else if (packets <= 2 && bytes < 512) {