Remove support for depth mode. This is a special mode where 2 streams
(from 2 different sensors) can be setup and then starting/stopping
1 will automatically also start/stop the other.
Like many of these special features I'm pretty sure that if the queue
setup is not done exactly right things will crash and there is no error
checking for this.
This seems to be for stereoscopic vision and the only known hw which
actually supports this is the Intel Aero board/SDK, all other 1000+
BYT/CHT models don't need this.
This false outside of the standard webcam use scenario which we are
trying to get working and this involves a bunch of hacks / special
exceptions all over the code, so lets remove this.
Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/
Link: https://lore.kernel.org/r/20230221145906.8113-2-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
/* Lock and unlock raw buffer */
#define V4L2_CID_ENABLE_RAW_BUFFER_LOCK (V4L2_CID_CAMERA_LASTP1 + 29)
-#define V4L2_CID_DEPTH_MODE (V4L2_CID_CAMERA_LASTP1 + 30)
-
#define V4L2_CID_EXPOSURE_ZONE_NUM (V4L2_CID_CAMERA_LASTP1 + 31)
/* Disable digital zoom */
#define V4L2_CID_DISABLE_DZ (V4L2_CID_CAMERA_LASTP1 + 32)
struct pci_dev *pdev = to_pci_dev(isp->dev);
enum ia_css_pipe_id css_pipe_id;
bool stream_restart[MAX_STREAM_NUM] = {0};
- bool depth_mode = false;
- int i, ret, depth_cnt = 0;
unsigned long flags;
+ int i, ret;
lockdep_assert_held(&isp->mutex);
!asd->stream_prepared)
continue;
- depth_cnt++;
-
if (asd->delayed_init == ATOMISP_DELAYED_INIT_QUEUED)
cancel_work_sync(&asd->delayed_init_work);
atomisp_reset(isp);
isp->isp_timeout = false;
- if (!isp_timeout) {
- for (i = 0; i < isp->num_of_streams; i++) {
- if (isp->asd[i].depth_mode->val)
- return;
- }
- }
-
for (i = 0; i < isp->num_of_streams; i++) {
struct atomisp_sub_device *asd = &isp->asd[i];
atomisp_recover_params_queue(&asd->video_out_preview);
atomisp_recover_params_queue(&asd->video_out_video_capture);
- if ((asd->depth_mode->val) &&
- (depth_cnt == ATOMISP_DEPTH_SENSOR_STREAMON_COUNT)) {
- depth_mode = true;
- continue;
- }
-
ret = v4l2_subdev_call(
isp->inputs[asd->input_curr].camera, video,
s_stream, 1);
dev_warn(isp->dev,
"can't start streaming on sensor!\n");
}
-
- if (depth_mode) {
- if (atomisp_stream_on_master_slave_sensor(isp, true))
- dev_warn(isp->dev,
- "master slave sensor stream on failed!\n");
- }
}
void atomisp_assert_recovery_work(struct work_struct *work)
(ATOMISP_SOC_CAMERA(asd) && ATOMISP_CSS_SUPPORT_YUVPP && \
!asd->copy_mode)
-#define ATOMISP_DEPTH_SENSOR_STREAMON_COUNT 2
-
-#define ATOMISP_DEPTH_DEFAULT_MASTER_SENSOR 0
-#define ATOMISP_DEPTH_DEFAULT_SLAVE_SENSOR 1
-
/* ISP2401 */
#define ATOMISP_ION_DEVICE_FD_OFFSET 16
#define ATOMISP_ION_SHARED_FD_MASK (0xFFFF)
return 1;
}
-int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp,
- bool isp_timeout)
-{
- unsigned int master, slave, delay_slave = 0;
- int ret;
-
- master = ATOMISP_DEPTH_DEFAULT_MASTER_SENSOR;
- slave = ATOMISP_DEPTH_DEFAULT_SLAVE_SENSOR;
- dev_warn(isp->dev,
- "depth mode use default master=%s.slave=%s.\n",
- isp->inputs[master].camera->name,
- isp->inputs[slave].camera->name);
-
- ret = v4l2_subdev_call(isp->inputs[master].camera, core,
- ioctl, ATOMISP_IOC_G_DEPTH_SYNC_COMP,
- &delay_slave);
- if (ret)
- dev_warn(isp->dev,
- "get depth sensor %s compensation delay failed.\n",
- isp->inputs[master].camera->name);
-
- ret = v4l2_subdev_call(isp->inputs[master].camera,
- video, s_stream, 1);
- if (ret) {
- dev_err(isp->dev, "depth mode master sensor %s stream-on failed.\n",
- isp->inputs[master].camera->name);
- return -EINVAL;
- }
-
- if (delay_slave != 0)
- udelay(delay_slave);
-
- ret = v4l2_subdev_call(isp->inputs[slave].camera,
- video, s_stream, 1);
- if (ret) {
- dev_err(isp->dev, "depth mode slave sensor %s stream-on failed.\n",
- isp->inputs[slave].camera->name);
- v4l2_subdev_call(isp->inputs[master].camera, video, s_stream, 0);
-
- return -EINVAL;
- }
-
- return 0;
-}
-
/* Input system HW workaround */
/* Input system address translation corrupts burst during */
/* invalidate. SW workaround for this is to set burst length */
dev_dbg(isp->dev, "DFS auto mode failed!\n");
}
- if (asd->depth_mode->val && atomisp_streaming_count(isp) ==
- ATOMISP_DEPTH_SENSOR_STREAMON_COUNT) {
- ret = atomisp_stream_on_master_slave_sensor(isp, false);
- if (ret) {
- dev_err(isp->dev, "master slave sensor stream on failed!\n");
- goto out_unlock;
- }
- goto start_delay_wq;
- } else if (asd->depth_mode->val && (atomisp_streaming_count(isp) <
- ATOMISP_DEPTH_SENSOR_STREAMON_COUNT)) {
- goto start_delay_wq;
- }
-
/* Enable the CSI interface on ANN B0/K0 */
if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 <<
ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) {
goto out_unlock;
}
-start_delay_wq:
if (asd->continuous_mode->val) {
atomisp_subdev_get_ffmt(&asd->subdev, NULL,
V4L2_SUBDEV_FORMAT_ACTIVE,
long atomisp_compat_ioctl32(struct file *file,
unsigned int cmd, unsigned long arg);
-int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp,
- bool isp_timeout);
-
int atomisp_start_streaming(struct vb2_queue *vq, unsigned int count);
void atomisp_stop_streaming(struct vb2_queue *vq);
{
struct atomisp_sub_device *asd = container_of(
ctrl->handler, struct atomisp_sub_device, ctrl_handler);
- unsigned int streaming;
- unsigned long flags;
-
switch (ctrl->id) {
case V4L2_CID_RUN_MODE:
return __atomisp_update_run_mode(asd);
- case V4L2_CID_DEPTH_MODE:
- /* Use spinlock instead of mutex to avoid possible locking issues */
- spin_lock_irqsave(&asd->isp->lock, flags);
- streaming = asd->streaming;
- spin_unlock_irqrestore(&asd->isp->lock, flags);
- if (streaming != ATOMISP_DEVICE_STREAMING_DISABLED) {
- dev_err(asd->isp->dev,
- "ISP is streaming, it is not supported to change the depth mode\n");
- return -EINVAL;
- }
- break;
}
return 0;
.def = 0,
};
-/*
- * Control for ISP depth mode
- *
- * When enabled, that means ISP will deal with dual streams and sensors will be
- * in slave/master mode.
- * slave sensor will have no output until master sensor is streamed on.
- */
-static const struct v4l2_ctrl_config ctrl_depth_mode = {
- .ops = &ctrl_ops,
- .id = V4L2_CID_DEPTH_MODE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Depth mode",
- .min = 0,
- .max = 1,
- .step = 1,
- .def = 0,
-};
-
static int atomisp_init_subdev_pipe(struct atomisp_sub_device *asd,
struct atomisp_video_pipe *pipe, enum v4l2_buf_type buf_type)
{
v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_enable_raw_buffer_lock,
NULL);
- asd->depth_mode =
- v4l2_ctrl_new_custom(&asd->ctrl_handler,
- &ctrl_depth_mode,
- NULL);
asd->disable_dz =
v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_disable_dz,
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *fmt_auto;
struct v4l2_ctrl *run_mode;
- struct v4l2_ctrl *depth_mode;
struct v4l2_ctrl *vfpp;
struct v4l2_ctrl *continuous_mode;
struct v4l2_ctrl *continuous_raw_buffer_size;
projects / platform / kernel / linux-rpi.git / commitdiff