tg3: 5719: Prevent tx data corruption

This patch enables a bit that prevents read DMA overflows and adjusts
the txmbuf margin from the hardware default.  The combination of these
modifications prevents a tx data corruption issue we were seeing on the
5719.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 982ed44..b6388be 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7857,7 +7857,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
        tw32(BUFMGR_DMA_HIGH_WATER,
             tp->bufmgr_config.dma_high_water);
 
-       tw32(BUFMGR_MODE, BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
+       val = BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE;
+       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+               val |= BUFMGR_MODE_NO_TX_UNDERRUN;
+       tw32(BUFMGR_MODE, val);
        for (i = 0; i < 2000; i++) {
                if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
                        break;
@@ -8037,6 +8040,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
                     val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
        }
 
+       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+               val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
+               tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val |
+                    TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K |
+                    TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K);
+       }
+
        /* Receive/send statistics. */
        if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
                val = tr32(RCVLPC_STATS_ENABLE);

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 44733e4..ec62f05 100644 (file)
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1225,6 +1225,7 @@
 #define  BUFMGR_MODE_ATTN_ENABLE        0x00000004
 #define  BUFMGR_MODE_BM_TEST            0x00000008
 #define  BUFMGR_MODE_MBLOW_ATTN_ENAB    0x00000010
+#define  BUFMGR_MODE_NO_TX_UNDERRUN     0x80000000
 #define BUFMGR_STATUS                  0x00004404
 #define  BUFMGR_STATUS_ERROR            0x00000004
 #define  BUFMGR_STATUS_MBLOW            0x00000010
@@ -1306,7 +1307,12 @@
 
 #define TG3_RDMA_RSRVCTRL_REG          0x00004900
 #define TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX         0x00000004
-/* 0x4904 --> 0x4c00 unused */
+/* 0x4904 --> 0x4910 unused */
+
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL     0x00004910
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K   0x00030000
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K  0x000c0000
+/* 0x4914 --> 0x4c00 unused */
 
 /* Write DMA control registers */
 #define WDMAC_MODE                     0x00004c00