USB: ark3116.c: remove dbg() usage

dbg() is a usb-serial specific macro.  This patch converts
the ark3116.c driver to use dev_dbg() instead to tie into the
dynamic debug infrastructure.

CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Bart Hartgers <bart.hartgers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 9413b74..f8ce97d 100644 (file)
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -265,7 +265,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
        hcr = (cflag & CRTSCTS) ? 0x03 : 0x00;
 
        /* calc baudrate */
-       dbg("%s - setting bps to %d", __func__, bps);
+       dev_dbg(&port->dev, "%s - setting bps to %d\n", __func__, bps);
        eval = 0;
        switch (bps) {
        case 0:
@@ -292,8 +292,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
        /* keep old LCR_SBC bit */
        lcr |= (priv->lcr & UART_LCR_SBC);
 
-       dbg("%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d",
-           __func__, hcr, lcr, quot);
+       dev_dbg(&port->dev, "%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d\n",
+               __func__, hcr, lcr, quot);
 
        /* handshake control */
        if (priv->hcr != hcr) {
@@ -375,8 +375,9 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 
        result = usb_serial_generic_open(tty, port);
        if (result) {
-               dbg("%s - usb_serial_generic_open failed: %d",
-                   __func__, result);
+               dev_dbg(&port->dev,
+                       "%s - usb_serial_generic_open failed: %d\n",
+                       __func__, result);
                goto err_out;
        }
 
@@ -622,24 +623,26 @@ static void ark3116_read_int_callback(struct urb *urb)
        case -ENOENT:
        case -ESHUTDOWN:
                /* this urb is terminated, clean up */
-               dbg("%s - urb shutting down with status: %d",
-                   __func__, status);
+               dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+                       __func__, status);
                return;
        default:
-               dbg("%s - nonzero urb status received: %d",
-                   __func__, status);
+               dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+                       __func__, status);
                break;
        case 0: /* success */
                /* discovered this by trail and error... */
                if ((urb->actual_length == 4) && (data[0] == 0xe8)) {
                        const __u8 id = data[1]&UART_IIR_ID;
-                       dbg("%s: iir=%02x", __func__, data[1]);
+                       dev_dbg(&port->dev, "%s: iir=%02x\n", __func__, data[1]);
                        if (id == UART_IIR_MSI) {
-                               dbg("%s: msr=%02x", __func__, data[3]);
+                               dev_dbg(&port->dev, "%s: msr=%02x\n",
+                                       __func__, data[3]);
                                ark3116_update_msr(port, data[3]);
                                break;
                        } else if (id == UART_IIR_RLSI) {
-                               dbg("%s: lsr=%02x", __func__, data[2]);
+                               dev_dbg(&port->dev, "%s: lsr=%02x\n",
+                                       __func__, data[2]);
                                ark3116_update_lsr(port, data[2]);
                                break;
                        }