[media] doc-rst: update CEC_RECEIVE

The timestamp field was split into rx_ts and tx_ts, and the rx/tx_status
fields were moved. Update the doc accordingly.

Also fix a bug that stated that a non-zero tx_status field signaled an
error. That's not true, since TX_STATUS_OK is 1, not 0.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index 9a16a3d..c315efc 100644 (file)
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -64,14 +64,20 @@ queue, then it will return -1 and set errno to the EBUSY error code.
 
        -  __u64
 
-       -  ``ts``
+       -  ``tx_ts``
 
-       -  Timestamp of when the message was transmitted in ns in the case of
-         :ref:`CEC_TRANSMIT` with ``reply`` set to 0, or the timestamp of the
-         received message in all other cases.
+       -  Timestamp in ns of when the last byte of the message was transmitted.
 
     -  .. row 2
 
+       -  __u64
+
+       -  ``rx_ts``
+
+       -  Timestamp in ns of when the last byte of the message was received.
+
+    -  .. row 3
+
        -  __u32
 
        -  ``len``
@@ -81,7 +87,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          :ref:`CEC_RECEIVE` and for :ref:`CEC_TRANSMIT` it will be filled in with
          the length of the reply message if ``reply`` was set.
 
-    -  .. row 3
+    -  .. row 4
 
        -  __u32
 
@@ -94,7 +100,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          then it will be replaced by 1000 if the ``reply`` is non-zero or
          ignored if ``reply`` is 0.
 
-    -  .. row 4
+    -  .. row 5
 
        -  __u32
 
@@ -105,7 +111,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          framework to generate an event if a reply for a message was
          requested and the message was transmitted in a non-blocking mode.
 
-    -  .. row 5
+    -  .. row 6
 
        -  __u32
 
@@ -113,18 +119,6 @@ queue, then it will return -1 and set errno to the EBUSY error code.
 
        -  Flags. No flags are defined yet, so set this to 0.
 
-    -  .. row 6
-
-       -  __u8
-
-       -  ``rx_status``
-
-       -  The status bits of the received message. See
-         :ref:`cec-rx-status` for the possible status values. It is 0 if
-         this message was transmitted, not received, unless this is the
-         reply to a transmitted message. In that case both ``rx_status``
-         and ``tx_status`` are set.
-
     -  .. row 7
 
        -  __u8
@@ -146,7 +140,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          for :ref:`CEC_TRANSMIT` it will be filled in with the payload of the
          reply message if ``reply`` was set.
 
-    -  .. row 9
+    -  .. row 8
 
        -  __u8
 
@@ -154,8 +148,8 @@ queue, then it will return -1 and set errno to the EBUSY error code.
 
        -  Wait until this message is replied. If ``reply`` is 0 and the
          ``timeout`` is 0, then don't wait for a reply but return after
-         transmitting the message. If there was an error as indicated by a
-         non-zero ``tx_status`` field, then ``reply`` and ``timeout`` are
+         transmitting the message. If there was an error as indicated by the
+         ``tx_status`` field, then ``reply`` and ``timeout`` are
          both set to 0 by the driver. Ignored by :ref:`CEC_RECEIVE`. The case
          where ``reply`` is 0 (this is the opcode for the Feature Abort
          message) and ``timeout`` is non-zero is specifically allowed to
@@ -163,10 +157,32 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          Feature Abort reply. In this case ``rx_status`` will either be set
          to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or :ref:`CEC_RX_STATUS-FEATURE-ABORT <CEC-RX-STATUS-FEATURE-ABORT>`.
 
+    -  .. row 9
+
+       -  __u8
+
+       -  ``rx_status``
+
+       -  The status bits of the received message. See
+         :ref:`cec-rx-status` for the possible status values. It is 0 if
+         this message was transmitted, not received, unless this is the
+         reply to a transmitted message. In that case both ``rx_status``
+         and ``tx_status`` are set.
+
     -  .. row 10
 
        -  __u8
 
+       -  ``tx_status``
+
+       -  The status bits of the transmitted message. See
+         :ref:`cec-tx-status` for the possible status values. It is 0 if
+         this messages was received, not transmitted.
+
+    -  .. row 11
+
+       -  __u8
+
        -  ``tx_arb_lost_cnt``
 
        -  A counter of the number of transmit attempts that resulted in the
@@ -174,7 +190,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          this, otherwise it is always 0. This counter is only valid if the
          :ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set.
 
-    -  .. row 11
+    -  .. row 12
 
        -  __u8
 
@@ -185,7 +201,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          this, otherwise it is always 0. This counter is only valid if the
          :ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set.
 
-    -  .. row 12
+    -  .. row 13
 
        -  __u8
 
@@ -196,7 +212,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
          this, otherwise it is always 0. This counter is only valid if the
          :ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set.
 
-    -  .. row 13
+    -  .. row 14
 
        -  __u8