net: mvpp2: add explicit sgmii-2500 support

Until now the mvpp2 driver used an extra 'phy-speed'
DT property in order to differentiate between the
SGMII and SGMII @2.5GHz. As there is a dedicated
PHY_INTERFACE_MODE_SGMII_2500 flag to mark the latter
start using it and drop the custom flag.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index c5bfe41..4c0a7b0 100644 (file)
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -976,8 +976,6 @@ struct mvpp2_port {
        unsigned int duplex;
        unsigned int speed;
 
-       unsigned int phy_speed;         /* SGMII 1Gbps vs 2.5Gbps */
-
        struct mvpp2_bm_pool *pool_long;
        struct mvpp2_bm_pool *pool_short;
 
@@ -2875,6 +2873,7 @@ static void mvpp2_port_mii_set(struct mvpp2_port *port)
 
        switch (port->phy_interface) {
        case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_SGMII_2500:
                val |= MVPP2_GMAC_INBAND_AN_MASK;
                break;
        case PHY_INTERFACE_MODE_1000BASEX:
@@ -2942,6 +2941,7 @@ static void mvpp2_port_loopback_set(struct mvpp2_port *port)
                val &= ~MVPP2_GMAC_GMII_LB_EN_MASK;
 
        if (port->phy_interface == PHY_INTERFACE_MODE_SGMII ||
+           port->phy_interface == PHY_INTERFACE_MODE_SGMII_2500 ||
            port->phy_interface == PHY_INTERFACE_MODE_1000BASEX ||
            port->phy_interface == PHY_INTERFACE_MODE_2500BASEX)
                val |= MVPP2_GMAC_PCS_LB_EN_MASK;
@@ -3239,12 +3239,11 @@ static int gop_gmac_mode_cfg(struct mvpp2_port *port)
        /* Set TX FIFO thresholds */
        switch (port->phy_interface) {
        case PHY_INTERFACE_MODE_SGMII:
-               if (port->phy_speed == 2500)
-                       gop_gmac_sgmii2_5_cfg(port);
-               else
-                       gop_gmac_sgmii_cfg(port);
+               gop_gmac_sgmii_cfg(port);
+               break;
+       case PHY_INTERFACE_MODE_SGMII_2500:
+               gop_gmac_sgmii2_5_cfg(port);
                break;
-
        case PHY_INTERFACE_MODE_1000BASEX:
                gop_gmac_1000basex_cfg(port);
                break;
@@ -3425,6 +3424,7 @@ static int gop_port_init(struct mvpp2_port *port)
                break;
 
        case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                /* configure PCS */
@@ -3484,6 +3484,7 @@ static void gop_port_enable(struct mvpp2_port *port, int enable)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                if (enable)
@@ -3520,6 +3521,7 @@ static u32 mvpp2_netc_cfg_create(int gop_id, phy_interface_t phy_type)
 
        if (gop_id == 2) {
                if (phy_type == PHY_INTERFACE_MODE_SGMII ||
+                   phy_type == PHY_INTERFACE_MODE_SGMII_2500 ||
                    phy_type == PHY_INTERFACE_MODE_1000BASEX ||
                    phy_type == PHY_INTERFACE_MODE_2500BASEX)
                        val |= MV_NETC_GE_MAC2_SGMII;
@@ -3530,6 +3532,7 @@ static u32 mvpp2_netc_cfg_create(int gop_id, phy_interface_t phy_type)
 
        if (gop_id == 3) {
                if (phy_type == PHY_INTERFACE_MODE_SGMII ||
+                   phy_type == PHY_INTERFACE_MODE_SGMII_2500 ||
                    phy_type == PHY_INTERFACE_MODE_1000BASEX ||
                    phy_type == PHY_INTERFACE_MODE_2500BASEX)
                        val |= MV_NETC_GE_MAC3_SGMII;
@@ -4528,6 +4531,7 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                mvpp2_gmac_max_rx_size_set(port);
@@ -4838,15 +4842,6 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
                             &port->phy_tx_disable_gpio, GPIOD_IS_OUT);
 #endif
 
-       /*
-        * ToDo:
-        * Not sure if this DT property "phy-speed" will get accepted, so
-        * this might change later
-        */
-       /* Get phy-speed for SGMII 2.5Gbps vs 1Gbps setup */
-       port->phy_speed = fdtdec_get_int(gd->fdt_blob, port_node,
-                                        "phy-speed", 1000);
-
        port->id = id;
        if (port->priv->hw_version == MVPP21)
                port->first_rxq = port->id * rxq_number;
@@ -5275,6 +5270,7 @@ static int mvpp2_start(struct udevice *dev)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                mvpp2_port_power_up(port);