hwmon: (lm63) Expose automatic fan speed control lookup table

The LM63 and compatible devices have a lookup table to control the fan
speed automatically. Expose it in sysfs. Values are cached for 5
seconds, independently of the other register values to avoid slowing
down "sensors". We might make the table values writable in the future.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index df3e1ae..4d30d20 100644 (file)
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -66,7 +66,8 @@ supported either.
 
 The lm63 driver will not update its values more frequently than configured with
 the update_interval sysfs attribute; reading them more often will do no harm,
-but will return 'old' values.
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
 
 The LM64 is effectively an LM63 with GPIO lines. The driver does not
 support these GPIO lines at present.

diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index a5e4ba8..1c06a33 100644 (file)
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -75,6 +75,9 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
 
 #define LM63_REG_PWM_VALUE             0x4C
 #define LM63_REG_PWM_FREQ              0x4D
+#define LM63_REG_LUT_TEMP_HYST         0x4F
+#define LM63_REG_LUT_TEMP(nr)          (0x50 + 2 * (nr))
+#define LM63_REG_LUT_PWM(nr)           (0x51 + 2 * (nr))
 
 #define LM63_REG_LOCAL_TEMP            0x00
 #define LM63_REG_LOCAL_HIGH            0x05
@@ -192,7 +195,9 @@ struct lm63_data {
        struct device *hwmon_dev;
        struct mutex update_lock;
        char valid; /* zero until following fields are valid */
+       char lut_valid; /* zero until lut fields are valid */
        unsigned long last_updated; /* in jiffies */
+       unsigned long lut_last_updated; /* in jiffies */
        enum chips kind;
        int temp2_offset;
 
@@ -204,18 +209,22 @@ struct lm63_data {
        u16 fan[2];     /* 0: input
                           1: low limit */
        u8 pwm1_freq;
-       u8 pwm1_value;
-       s8 temp8[3];    /* 0: local input
+       u8 pwm1[9];     /* 0: current output
+                          1-8: lookup table */
+       s8 temp8[11];   /* 0: local input
                           1: local high limit
-                          2: remote critical limit */
+                          2: remote critical limit
+                          3-10: lookup table */
        s16 temp11[4];  /* 0: remote input
                           1: remote low limit
                           2: remote high limit
                           3: remote offset */
        u16 temp11u;    /* remote input (unsigned) */
        u8 temp2_crit_hyst;
+       u8 lut_temp_hyst;
        u8 alarms;
        bool pwm_highres;
+       bool lut_temp_highres;
        bool remote_unsigned; /* true if unsigned remote upper limits */
        bool trutherm;
 };
@@ -227,6 +236,11 @@ static inline int temp8_from_reg(struct lm63_data *data, int nr)
        return TEMP8_FROM_REG(data->temp8[nr]);
 }
 
+static inline int lut_temp_from_reg(struct lm63_data *data, int nr)
+{
+       return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000);
+}
+
 /*
  * Sysfs callback functions and files
  */
@@ -261,17 +275,19 @@ static ssize_t set_fan(struct device *dev, struct device_attribute *dummy,
        return count;
 }
 
-static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy,
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *devattr,
                         char *buf)
 {
+       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct lm63_data *data = lm63_update_device(dev);
+       int nr = attr->index;
        int pwm;
 
        if (data->pwm_highres)
-               pwm = data->pwm1_value;
+               pwm = data->pwm1[nr];
        else
-               pwm = data->pwm1_value >= 2 * data->pwm1_freq ?
-                      255 : (data->pwm1_value * 255 + data->pwm1_freq) /
+               pwm = data->pwm1[nr] >= 2 * data->pwm1_freq ?
+                      255 : (data->pwm1[nr] * 255 + data->pwm1_freq) /
                       (2 * data->pwm1_freq);
 
        return sprintf(buf, "%d\n", pwm);
@@ -294,9 +310,9 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
 
        val = SENSORS_LIMIT(val, 0, 255);
        mutex_lock(&data->update_lock);
-       data->pwm1_value = data->pwm_highres ? val :
-                          (val * data->pwm1_freq * 2 + 127) / 255;
-       i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
+       data->pwm1[0] = data->pwm_highres ? val :
+                       (val * data->pwm1_freq * 2 + 127) / 255;
+       i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1[0]);
        mutex_unlock(&data->update_lock);
        return count;
 }
@@ -333,6 +349,16 @@ static ssize_t show_remote_temp8(struct device *dev,
                       + data->temp2_offset);
 }
 
+static ssize_t show_lut_temp(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+       struct lm63_data *data = lm63_update_device(dev);
+       return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index)
+                      + data->temp2_offset);
+}
+
 static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
                         const char *buf, size_t count)
 {
@@ -440,6 +466,17 @@ static ssize_t show_temp2_crit_hyst(struct device *dev,
                       - TEMP8_FROM_REG(data->temp2_crit_hyst));
 }
 
+static ssize_t show_lut_temp_hyst(struct device *dev,
+                                 struct device_attribute *devattr, char *buf)
+{
+       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+       struct lm63_data *data = lm63_update_device(dev);
+
+       return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index)
+                      + data->temp2_offset
+                      - TEMP8_FROM_REG(data->lut_temp_hyst));
+}
+
 /*
  * And now the other way around, user-space provides an absolute
  * hysteresis value and we have to store a relative one
@@ -574,8 +611,48 @@ static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
        set_fan, 1);
 
-static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 0);
 static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, show_pwm1, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IRUGO,
+       show_lut_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IRUGO, show_pwm1, NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO,
+       show_lut_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, show_pwm1, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IRUGO,
+       show_lut_temp, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IRUGO, show_pwm1, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IRUGO,
+       show_lut_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IRUGO, show_pwm1, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IRUGO,
+       show_lut_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IRUGO, show_pwm1, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IRUGO,
+       show_lut_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IRUGO, show_pwm1, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IRUGO,
+       show_lut_temp, NULL, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IRUGO, show_pwm1, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IRUGO,
+       show_lut_temp, NULL, 10);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp_hyst, S_IRUGO,
+       show_lut_temp_hyst, NULL, 10);
 
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8,
@@ -609,8 +686,33 @@ static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
                   set_update_interval);
 
 static struct attribute *lm63_attributes[] = {
-       &dev_attr_pwm1.attr,
+       &sensor_dev_attr_pwm1.dev_attr.attr,
        &dev_attr_pwm1_enable.attr,
+       &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point5_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point6_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point7_temp_hyst.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm1_auto_point8_temp_hyst.dev_attr.attr,
+
        &sensor_dev_attr_temp1_input.dev_attr.attr,
        &sensor_dev_attr_temp2_input.dev_attr.attr,
        &sensor_dev_attr_temp2_min.dev_attr.attr,
@@ -834,6 +936,8 @@ static void lm63_init_client(struct i2c_client *client)
                u8 config_enhanced
                  = i2c_smbus_read_byte_data(client,
                                             LM96163_REG_CONFIG_ENHANCED);
+               if (config_enhanced & 0x20)
+                       data->lut_temp_highres = true;
                if ((config_enhanced & 0x10)
                    && !(data->config_fan & 0x08) && data->pwm1_freq == 8)
                        data->pwm_highres = true;
@@ -872,6 +976,7 @@ static struct lm63_data *lm63_update_device(struct device *dev)
        struct i2c_client *client = to_i2c_client(dev);
        struct lm63_data *data = i2c_get_clientdata(client);
        unsigned long next_update;
+       int i;
 
        mutex_lock(&data->update_lock);
 
@@ -895,8 +1000,8 @@ static struct lm63_data *lm63_update_device(struct device *dev)
                                  LM63_REG_PWM_FREQ);
                if (data->pwm1_freq == 0)
                        data->pwm1_freq = 1;
-               data->pwm1_value = i2c_smbus_read_byte_data(client,
-                                  LM63_REG_PWM_VALUE);
+               data->pwm1[0] = i2c_smbus_read_byte_data(client,
+                               LM63_REG_PWM_VALUE);
 
                data->temp8[0] = i2c_smbus_read_byte_data(client,
                                 LM63_REG_LOCAL_TEMP);
@@ -939,6 +1044,21 @@ static struct lm63_data *lm63_update_device(struct device *dev)
                data->valid = 1;
        }
 
+       if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
+           !data->lut_valid) {
+               for (i = 0; i < 8; i++) {
+                       data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
+                                           LM63_REG_LUT_PWM(i));
+                       data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
+                                            LM63_REG_LUT_TEMP(i));
+               }
+               data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
+                                     LM63_REG_LUT_TEMP_HYST);
+
+               data->lut_last_updated = jiffies;
+               data->lut_valid = 1;
+       }
+
        mutex_unlock(&data->update_lock);
 
        return data;