staging:iio:accel:lis3l02dq move to threaded trigger handling.
authorJonathan Cameron <jic23@cam.ac.uk>
Wed, 18 May 2011 13:41:22 +0000 (14:41 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 19 May 2011 23:14:49 +0000 (16:14 -0700)
V2: Cleaned up handling of name string.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/iio/accel/lis3l02dq.h
drivers/staging/iio/accel/lis3l02dq_core.c
drivers/staging/iio/accel/lis3l02dq_ring.c

index 67f312d..a910f2d 100644 (file)
@@ -150,7 +150,6 @@ Form of high byte dependent on justification set in ctrl reg */
  * struct lis3l02dq_state - device instance specific data
  * @helper:            data and func pointer allowing generic functions
  * @us:                        actual spi_device
- * @inter:             used to check if new interrupt has been triggered
  * @trig:              data ready trigger registered with iio
  * @tx:                        transmit buffer
  * @rx:                        receive buffer
@@ -159,7 +158,6 @@ Form of high byte dependent on justification set in ctrl reg */
 struct lis3l02dq_state {
        struct iio_sw_ring_helper_state help;
        struct spi_device               *us;
-       bool                            inter;
        struct iio_trigger              *trig;
        u8                              *tx;
        u8                              *rx;
index 6c5f8a6..b1fb049 100644 (file)
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
-
 #include <linux/sysfs.h>
-#include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
@@ -724,7 +721,6 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
        }
 
        if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
-               st->inter = 0;
                ret = lis3l02dq_probe_trigger(st->help.indio_dev);
                if (ret)
                        goto error_uninitialize_ring;
@@ -800,8 +796,6 @@ static int lis3l02dq_remove(struct spi_device *spi)
        if (ret)
                goto err_ret;
 
-       flush_scheduled_work();
-
        lis3l02dq_remove_trigger(indio_dev);
        iio_ring_buffer_unregister(indio_dev->ring);
        lis3l02dq_unconfigure_ring(indio_dev);
index 9bc2e5f..d261bd6 100644 (file)
@@ -1,13 +1,11 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
-#include <linux/list.h>
 #include <linux/slab.h>
 
 #include "../iio.h"
@@ -29,37 +27,6 @@ static inline u16 combine_8_to_16(u8 lower, u8 upper)
 }
 
 /**
- * lis3l02dq_poll_func_th() top half interrupt handler called by trigger
- * @private_data:      iio_dev
- **/
-static void lis3l02dq_poll_func_th(struct iio_dev *indio_dev, s64 time)
-{
-       struct iio_sw_ring_helper_state *h
-               = iio_dev_get_devdata(indio_dev);
-       struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
-       /* in this case we need to slightly extend the helper function */
-       iio_sw_poll_func_th(indio_dev, time);
-
-       /* Indicate that this interrupt is being handled */
-       /* Technically this is trigger related, but without this
-        * handler running there is currently now way for the interrupt
-        * to clear.
-        */
-       st->inter = 1;
-}
-
-/**
- * lis3l02dq_data_rdy_trig_poll() the event handler for the data rdy trig
- **/
-static irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private)
-{
-       disable_irq_nosync(irq);
-       iio_trigger_poll(private, iio_get_time_ns());
-
-       return IRQ_HANDLED;
-}
-
-/**
  * lis3l02dq_read_accel_from_ring() individual acceleration read from ring
  **/
 ssize_t lis3l02dq_read_accel_from_ring(struct iio_ring_buffer *ring,
@@ -153,15 +120,16 @@ static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
        return ret;
 }
 
-static void lis3l02dq_trigger_bh_to_ring(struct work_struct *work_s)
+static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 {
-       struct iio_sw_ring_helper_state *h
-               = container_of(work_s, struct iio_sw_ring_helper_state,
-                       work_trigger_to_ring);
-       struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
+       struct iio_poll_func *pf = p;
+       struct iio_dev *indio_dev = pf->private_data;
+       struct iio_sw_ring_helper_state *h = iio_dev_get_devdata(indio_dev);
 
-       st->inter = 0;
-       iio_sw_trigger_bh_to_ring(work_s);
+       h->last_timestamp = pf->timestamp;
+       iio_sw_trigger_to_ring(h);
+
+       return IRQ_HANDLED;
 }
 
 static int lis3l02dq_get_ring_element(struct iio_sw_ring_helper_state *h,
@@ -236,7 +204,7 @@ __lis3l02dq_write_data_ready_config(struct device *dev, bool state)
                valold = ret |
                        LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION;
                ret = request_irq(st->us->irq,
-                                 lis3l02dq_data_rdy_trig_poll,
+                                 &iio_trigger_generic_data_rdy_poll,
                                  IRQF_TRIGGER_RISING, "lis3l02dq_datardy",
                                  st->trig);
                if (ret)
@@ -272,10 +240,10 @@ static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig,
 
        __lis3l02dq_write_data_ready_config(&st->help.indio_dev->dev, state);
        if (state == false) {
-               /* possible quirk with handler currently worked around
-                  by ensuring the work queue is empty */
-               flush_scheduled_work();
-               /* Clear any outstanding ready events */
+               /*
+                * A possible quirk with teh handler is currently worked around
+                *  by ensuring outstanding read events are cleared.
+                */
                ret = lis3l02dq_read_all(st, NULL);
        }
        lis3l02dq_spi_read_reg_8(st->help.indio_dev,
@@ -298,32 +266,23 @@ static const struct attribute_group lis3l02dq_trigger_attr_group = {
 /**
  * lis3l02dq_trig_try_reen() try renabling irq for data rdy trigger
  * @trig:      the datardy trigger
- *
- * As the trigger may occur on any data element being updated it is
- * really rather likely to occur during the read from the previous
- * trigger event.  The only way to discover if this has occurred on
- * boards not supporting level interrupts is to take a look at the line.
- * If it is indicating another interrupt and we don't seem to have a
- * handler looking at it, then we need to notify the core that we need
- * to tell the triggering core to try reading all these again.
- **/
+ */
 static int lis3l02dq_trig_try_reen(struct iio_trigger *trig)
 {
        struct lis3l02dq_state *st = trig->private_data;
-       enable_irq(st->us->irq);
+       int i;
+
        /* If gpio still high (or high again) */
-       if (gpio_get_value(irq_to_gpio(st->us->irq)))
-               if (st->inter == 0) {
-                       /* already interrupt handler dealing with it */
-                       disable_irq_nosync(st->us->irq);
-                       if (st->inter == 1) {
-                               /* interrupt handler snuck in between test
-                                * and disable */
-                               enable_irq(st->us->irq);
-                               return 0;
-                       }
-                       return -EAGAIN;
-               }
+       /* In theory possible we will need to do this several times */
+       for (i = 0; i < 5; i++)
+               if (gpio_get_value(irq_to_gpio(st->us->irq)))
+                       lis3l02dq_read_all(st, NULL);
+               else
+                       break;
+       if (i == 5)
+               printk(KERN_INFO
+                      "Failed to clear the interrupt for lis3l02dq\n");
+
        /* irq reenabled so success! */
        return 0;
 }
@@ -334,17 +293,19 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
        struct iio_sw_ring_helper_state *h
                = iio_dev_get_devdata(indio_dev);
        struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
+       char *name;
 
-       st->trig = iio_allocate_trigger();
-       if (!st->trig)
-               return -ENOMEM;
-
-       st->trig->name = kasprintf(GFP_KERNEL,
-                                  "lis3l02dq-dev%d",
-                                  indio_dev->id);
-       if (!st->trig->name) {
+       name = kasprintf(GFP_KERNEL,
+                        "lis3l02dq-dev%d",
+                        indio_dev->id);
+       if (name == NULL) {
                ret = -ENOMEM;
-               goto error_free_trig;
+               goto error_ret;
+       }
+       st->trig = iio_allocate_trigger_named(name);
+       if (!st->trig) {
+               ret = -ENOMEM;
+               goto error_free_name;
        }
 
        st->trig->dev.parent = &st->us->dev;
@@ -355,15 +316,15 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
        st->trig->control_attrs = &lis3l02dq_trigger_attr_group;
        ret = iio_trigger_register(st->trig);
        if (ret)
-               goto error_free_trig_name;
+               goto error_free_trig;
 
        return 0;
 
-error_free_trig_name:
-       kfree(st->trig->name);
 error_free_trig:
        iio_free_trigger(st->trig);
-
+error_free_name:
+       kfree(name);
+error_ret:
        return ret;
 }
 
@@ -380,6 +341,7 @@ void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
 
 void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev)
 {
+       kfree(indio_dev->pollfunc->name);
        kfree(indio_dev->pollfunc);
        lis3l02dq_free_buf(indio_dev->ring);
 }
@@ -459,7 +421,7 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
        int ret;
        struct iio_sw_ring_helper_state *h = iio_dev_get_devdata(indio_dev);
        struct iio_ring_buffer *ring;
-       INIT_WORK(&h->work_trigger_to_ring, lis3l02dq_trigger_bh_to_ring);
+
        h->get_ring_element = &lis3l02dq_get_ring_element;
 
        ring = lis3l02dq_alloc_buf(indio_dev);
@@ -482,9 +444,20 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
        iio_scan_mask_set(ring, 1);
        iio_scan_mask_set(ring, 2);
 
-       ret = iio_alloc_pollfunc(indio_dev, NULL, &lis3l02dq_poll_func_th);
-       if (ret)
+       /* Functions are NULL as we set handler below */
+       indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
+
+       if (indio_dev->pollfunc == NULL) {
+               ret = -ENOMEM;
                goto error_iio_sw_rb_free;
+       }
+       indio_dev->pollfunc->private_data = indio_dev;
+       indio_dev->pollfunc->thread = &lis3l02dq_trigger_handler;
+       indio_dev->pollfunc->h = &iio_pollfunc_store_time;
+       indio_dev->pollfunc->type = 0;
+       indio_dev->pollfunc->name
+               = kasprintf(GFP_KERNEL, "lis3l02dq_consumer%d", indio_dev->id);
+
        indio_dev->modes |= INDIO_RING_TRIGGERED;
        return 0;