--- /dev/null
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+#include "cx23885.h"
+
+MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_LICENSE("GPL");
+
+static unsigned int debug = 0;
+module_param(debug,int,0644);
+MODULE_PARM_DESC(debug,"enable debug messages");
+
+static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card,"card type");
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "%s/0: " fmt, dev->name , ## arg)
+
+static unsigned int cx23885_devcount;
+
+static DEFINE_MUTEX(devlist);
+static LIST_HEAD(cx23885_devlist);
+
+#define NO_SYNC_LINE (-1U)
+
+/*
+ * CX23885 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ * 15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+struct sram_channel cx23885_sram_channels[] = {
+ [SRAM_CH01] = {
+ .name = "test ch1",
+ .cmds_start = 0x10000,
+ .ctrl_start = 0x10500,
+ .cdt = 0x10900,
+ .fifo_start = 0x3000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA1_PTR1,
+ .ptr2_reg = DMA1_PTR2,
+ .cnt1_reg = DMA1_CNT1,
+ .cnt2_reg = DMA1_CNT2,
+ .jumponly = 1,
+ },
+ [SRAM_CH02] = {
+ .name = "ch2",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA2_PTR1,
+ .ptr2_reg = DMA2_PTR2,
+ .cnt1_reg = DMA2_CNT1,
+ .cnt2_reg = DMA2_CNT2,
+ },
+ [SRAM_CH03] = {
+ .name = "ch3",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA3_PTR1,
+ .ptr2_reg = DMA3_PTR2,
+ .cnt1_reg = DMA3_CNT1,
+ .cnt2_reg = DMA3_CNT2,
+ },
+ [SRAM_CH04] = {
+ .name = "ch4",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA4_PTR1,
+ .ptr2_reg = DMA4_PTR2,
+ .cnt1_reg = DMA4_CNT1,
+ .cnt2_reg = DMA4_CNT2,
+ },
+ [SRAM_CH05] = {
+ .name = "ch5",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH06] = {
+ .name = "TS2 C",
+ .cmds_start = 0x10140,
+ .ctrl_start = 0x10680,
+ .cdt = 0x10480,
+ .fifo_start = 0x6000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH07] = {
+ .name = "ch7",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA6_PTR1,
+ .ptr2_reg = DMA6_PTR2,
+ .cnt1_reg = DMA6_CNT1,
+ .cnt2_reg = DMA6_CNT2,
+ },
+ [SRAM_CH08] = {
+ .name = "ch8",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA7_PTR1,
+ .ptr2_reg = DMA7_PTR2,
+ .cnt1_reg = DMA7_CNT1,
+ .cnt2_reg = DMA7_CNT2,
+ },
+ [SRAM_CH09] = {
+ .name = "ch9",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA8_PTR1,
+ .ptr2_reg = DMA8_PTR2,
+ .cnt1_reg = DMA8_CNT1,
+ .cnt2_reg = DMA8_CNT2,
+ },
+};
+
+/* FIXME, these allocations will change when
+ * analog arrives. The be reviewed.
+ * CX23887 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ * 15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+struct sram_channel cx23887_sram_channels[] = {
+ [SRAM_CH01] = {
+ .name = "test ch1",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA1_PTR1,
+ .ptr2_reg = DMA1_PTR2,
+ .cnt1_reg = DMA1_CNT1,
+ .cnt2_reg = DMA1_CNT2,
+ },
+ [SRAM_CH02] = {
+ .name = "ch2",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA2_PTR1,
+ .ptr2_reg = DMA2_PTR2,
+ .cnt1_reg = DMA2_CNT1,
+ .cnt2_reg = DMA2_CNT2,
+ },
+ [SRAM_CH03] = {
+ .name = "ch3",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA3_PTR1,
+ .ptr2_reg = DMA3_PTR2,
+ .cnt1_reg = DMA3_CNT1,
+ .cnt2_reg = DMA3_CNT2,
+ },
+ [SRAM_CH04] = {
+ .name = "ch4",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA4_PTR1,
+ .ptr2_reg = DMA4_PTR2,
+ .cnt1_reg = DMA4_CNT1,
+ .cnt2_reg = DMA4_CNT2,
+ },
+ [SRAM_CH05] = {
+ .name = "ch5",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH06] = {
+ .name = "TS2 C",
+ .cmds_start = 0x10140,
+ .ctrl_start = 0x10680,
+ .cdt = 0x10480,
+ .fifo_start = 0x6000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH07] = {
+ .name = "ch7",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA6_PTR1,
+ .ptr2_reg = DMA6_PTR2,
+ .cnt1_reg = DMA6_CNT1,
+ .cnt2_reg = DMA6_CNT2,
+ },
+ [SRAM_CH08] = {
+ .name = "ch8",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA7_PTR1,
+ .ptr2_reg = DMA7_PTR2,
+ .cnt1_reg = DMA7_CNT1,
+ .cnt2_reg = DMA7_CNT2,
+ },
+ [SRAM_CH09] = {
+ .name = "ch9",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA8_PTR1,
+ .ptr2_reg = DMA8_PTR2,
+ .cnt1_reg = DMA8_CNT1,
+ .cnt2_reg = DMA8_CNT2,
+ },
+};
+
+static int cx23885_risc_decode(u32 risc)
+{
+ static char *instr[16] = {
+ [ RISC_SYNC >> 28 ] = "sync",
+ [ RISC_WRITE >> 28 ] = "write",
+ [ RISC_WRITEC >> 28 ] = "writec",
+ [ RISC_READ >> 28 ] = "read",
+ [ RISC_READC >> 28 ] = "readc",
+ [ RISC_JUMP >> 28 ] = "jump",
+ [ RISC_SKIP >> 28 ] = "skip",
+ [ RISC_WRITERM >> 28 ] = "writerm",
+ [ RISC_WRITECM >> 28 ] = "writecm",
+ [ RISC_WRITECR >> 28 ] = "writecr",
+ };
+ static int incr[16] = {
+ [ RISC_WRITE >> 28 ] = 3, // 2
+ [ RISC_JUMP >> 28 ] = 3, // 2
+ [ RISC_SKIP >> 28 ] = 1,
+ [ RISC_SYNC >> 28 ] = 1,
+ [ RISC_WRITERM >> 28 ] = 3,
+ [ RISC_WRITECM >> 28 ] = 3,
+ [ RISC_WRITECR >> 28 ] = 4,
+ };
+ static char *bits[] = {
+ "12", "13", "14", "resync",
+ "cnt0", "cnt1", "18", "19",
+ "20", "21", "22", "23",
+ "irq1", "irq2", "eol", "sol",
+ };
+ int i;
+
+ printk("0x%08x [ %s", risc,
+ instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+ for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
+ if (risc & (1 << (i + 12)))
+ printk(" %s",bits[i]);
+ printk(" count=%d ]\n", risc & 0xfff);
+ return incr[risc >> 28] ? incr[risc >> 28] : 1;
+}
+
+void cx23885_wakeup(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q, u32 count)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_buffer *buf;
+ int bc;
+
+ for (bc = 0;; bc++) {
+ if (list_empty(&q->active))
+ break;
+ buf = list_entry(q->active.next,
+ struct cx23885_buffer, vb.queue);
+ /* count comes from the hw and is is 16bit wide --
+ * this trick handles wrap-arounds correctly for
+ * up to 32767 buffers in flight... */
+ if ((s16) (count - buf->count) < 0)
+ break;
+ do_gettimeofday(&buf->vb.ts);
+ dprintk(2,"[%p/%d] wakeup reg=%d buf=%d\n",buf,buf->vb.i,
+ count, buf->count);
+ buf->vb.state = STATE_DONE;
+ list_del(&buf->vb.queue);
+ wake_up(&buf->vb.done);
+ }
+ if (list_empty(&q->active)) {
+ del_timer(&q->timeout);
+ } else {
+ mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ }
+ if (bc != 1)
+ printk("%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc);
+}
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+ struct sram_channel *ch);
+
+int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+ struct sram_channel *ch,
+ unsigned int bpl, u32 risc)
+{
+ unsigned int i,lines;
+ u32 cdt;
+
+ if (ch->cmds_start == 0)
+ {
+ dprintk(1, "%s() Erasing channel [%s]\n",__FUNCTION__, ch->name);
+ cx_write(ch->ptr1_reg, 0);
+ cx_write(ch->ptr2_reg, 0);
+ cx_write(ch->cnt2_reg, 0);
+ cx_write(ch->cnt1_reg, 0);
+ return 0;
+ } else {
+ dprintk(1, "%s() Configuring channel [%s]\n",__FUNCTION__, ch->name);
+ }
+
+ bpl = (bpl + 7) & ~7; /* alignment */
+ cdt = ch->cdt;
+ lines = ch->fifo_size / bpl;
+ if (lines > 6)
+ lines = 6;
+ BUG_ON(lines < 2);
+
+ cx_write(8+0, cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC) );
+ cx_write(8+4, cpu_to_le32(8) );
+ cx_write(8+8, cpu_to_le32(0) );
+
+ /* write CDT */
+ for (i = 0; i < lines; i++) {
+ dprintk(2, "%s() 0x%08x <- 0x%08x\n", __FUNCTION__, cdt + 16*i, ch->fifo_start + bpl*i);
+ cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
+ cx_write(cdt + 16*i + 4, 0);
+ cx_write(cdt + 16*i + 8, 0);
+ cx_write(cdt + 16*i + 12, 0);
+ }
+
+ /* write CMDS */
+ if (ch->jumponly)
+ cx_write(ch->cmds_start + 0, 8);
+ else
+ cx_write(ch->cmds_start + 0, risc);
+ cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */
+ cx_write(ch->cmds_start + 8, cdt);
+ cx_write(ch->cmds_start + 12, (lines*16) >> 3);
+ cx_write(ch->cmds_start + 16, ch->ctrl_start);
+ if (ch->jumponly)
+ cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2) );
+ else
+ cx_write(ch->cmds_start + 20, 64 >> 2);
+ for (i = 24; i < 80; i += 4)
+ cx_write(ch->cmds_start + i, 0);
+
+ /* fill registers */
+ cx_write(ch->ptr1_reg, ch->fifo_start);
+ cx_write(ch->ptr2_reg, cdt);
+ cx_write(ch->cnt2_reg, (lines*16) >> 3);
+ cx_write(ch->cnt1_reg, (bpl >> 3) -1);
+
+ dprintk(2,"[bridged %d] sram setup %s: bpl=%d lines=%d\n",
+ cx23885_boards[dev->board].bridge,
+ ch->name,
+ bpl,
+ lines);
+
+ return 0;
+}
+
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+ struct sram_channel *ch)
+{
+ static char *name[] = {
+ "init risc lo",
+ "init risc hi",
+ "cdt base",
+ "cdt size",
+ "iq base",
+ "iq size",
+ "risc pc lo",
+ "risc pc hi",
+ "iq wr ptr",
+ "iq rd ptr",
+ "cdt current",
+ "pci target lo",
+ "pci target hi",
+ "line / byte",
+ };
+ u32 risc;
+ unsigned int i,j,n;
+
+ printk("%s: %s - dma channel status dump\n",
+ dev->name, ch->name);
+ for (i = 0; i < ARRAY_SIZE(name); i++)
+ printk("%s: cmds: %-15s: 0x%08x\n",
+ dev->name, name[i],
+ cx_read(ch->cmds_start + 4*i));
+
+ for (i = 0; i < 4; i++) {
+ risc = cx_read(ch->cmds_start + 4 * (i+14));
+ printk("%s: risc%d: ", dev->name, i);
+ cx23885_risc_decode(risc);
+ }
+ for (i = 0; i < (64 >> 2); i += n) {
+ risc = cx_read(ch->ctrl_start + 4 * i); /* No consideration for bits 63-32 */
+ printk("%s: (0x%08x) iq %x: ", dev->name, ch->ctrl_start + 4 * i, i);
+ n = cx23885_risc_decode(risc);
+ for (j = 1; j < n; j++) {
+ risc = cx_read(ch->ctrl_start + 4 * (i+j));
+ printk("%s: iq %x: 0x%08x [ arg #%d ]\n",
+ dev->name, i+j, risc, j);
+ }
+ }
+
+ printk("%s: fifo: 0x%08x -> 0x%x\n",
+ dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
+ printk("%s: ctrl: 0x%08x -> 0x%x\n",
+ dev->name, ch->ctrl_start, ch->ctrl_start+6*16);
+ printk("%s: ptr1_reg: 0x%08x\n",
+ dev->name, cx_read(ch->ptr1_reg));
+ printk("%s: ptr2_reg: 0x%08x\n",
+ dev->name, cx_read(ch->ptr2_reg));
+ printk("%s: cnt1_reg: 0x%08x\n",
+ dev->name, cx_read(ch->cnt1_reg));
+ printk("%s: cnt2_reg: 0x%08x\n",
+ dev->name, cx_read(ch->cnt2_reg));
+}
+
+void cx23885_risc_disasm(struct cx23885_tsport *port, struct btcx_riscmem *risc)
+{
+ struct cx23885_dev *dev = port->dev;
+ unsigned int i,j,n;
+
+ printk("%s: risc disasm: %p [dma=0x%08lx]\n",
+ dev->name, risc->cpu, (unsigned long)risc->dma);
+ for (i = 0; i < (risc->size >> 2); i += n) {
+ printk("%s: %04d: ", dev->name, i);
+ n = cx23885_risc_decode(risc->cpu[i]);
+ for (j = 1; j < n; j++)
+ printk("%s: %04d: 0x%08x [ arg #%d ]\n",
+ dev->name, i+j, risc->cpu[i+j], j);
+ if (risc->cpu[i] == RISC_JUMP)
+ break;
+ }
+}
+
+void cx23885_shutdown(struct cx23885_dev *dev)
+{
+ /* disable RISC controller */
+ cx_write(DEV_CNTRL2, 0);
+
+ /* Disable all IR activity */
+ cx_write(IR_CNTRL_REG, 0);
+
+ /* Disable Video A/B activity */
+ cx_write(VID_A_DMA_CTL, 0);
+ cx_write(VID_B_DMA_CTL, 0);
+ cx_write(VID_C_DMA_CTL, 0);
+
+ /* Disable Audio activity */
+ cx_write(AUD_INT_DMA_CTL, 0);
+ cx_write(AUD_EXT_DMA_CTL, 0);
+
+ /* Disable Serial port */
+ cx_write(UART_CTL, 0);
+
+ /* Disable Interrupts */
+ cx_write(PCI_INT_MSK, 0);
+ cx_write(VID_A_INT_MSK, 0);
+ cx_write(VID_B_INT_MSK, 0);
+ cx_write(VID_C_INT_MSK, 0);
+ cx_write(AUDIO_INT_INT_MSK, 0);
+ cx_write(AUDIO_EXT_INT_MSK, 0);
+
+}
+
+void cx23885_reset(struct cx23885_dev *dev)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ cx23885_shutdown(dev);
+
+ cx_write(PCI_INT_STAT, 0xffffffff);
+ cx_write(VID_A_INT_STAT, 0xffffffff);
+ cx_write(VID_B_INT_STAT, 0xffffffff);
+ cx_write(VID_C_INT_STAT, 0xffffffff);
+ cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
+ cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
+ cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+
+ mdelay(100);
+
+#if SRAM
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH01 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH02 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH03 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH04 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH05 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH06 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH07 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH08 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH09 ], 128, 0);
+
+#else
+ // FIXME: Put a pointer to the sram_channel table in cx23885_dev
+ // and stop all this ugly switch/if code
+ switch(cx23885_boards[dev->board].bridge) {
+ case CX23885_BRIDGE_885:
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH01 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH02 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH03 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH04 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH05 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH06 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH07 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH08 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23885_sram_channels[ SRAM_CH09 ], 128, 0);
+ break;
+ case CX23885_BRIDGE_887:
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH01 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH02 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH03 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH04 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH05 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH06 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH07 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH08 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &cx23887_sram_channels[ SRAM_CH09 ], 128, 0);
+ break;
+ default:
+ printk(KERN_ERR "%s() error, default case", __FUNCTION__ );
+ }
+#endif
+
+ switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ /* GPIO-0 656_CLK */
+ /* GPIO-1 656_D0 */
+ /* GPIO-2 8295A Reset */
+ /* GPIO-3-10 cx23417 data0-7 */
+ /* GPIO-11-14 cx23417 addr0-3 */
+ /* GPIO-15-18 cx23417 READY, CS, RD, WR */
+ /* GPIO-19 IR_RX */
+ dprintk( 1, "%s() Configuring HVR1800 GPIO's\n", __FUNCTION__);
+ // FIXME: Analog requires the tuner is brought out of reset
+ break;
+ }
+}
+
+
+static int cx23885_pci_quirks(struct cx23885_dev *dev)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ cx_clear(RDR_TLCTL0, 1 << 4);
+ break;
+ }
+ return 0;
+}
+
+static int get_resources(struct cx23885_dev *dev)
+{
+ if (request_mem_region(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0),
+ dev->name))
+ return 0;
+
+ printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
+ dev->name, (unsigned long long)pci_resource_start(dev->pci,0));
+
+ return -EBUSY;
+}
+
+static void cx23885_timeout(unsigned long data);
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+ u32 reg, u32 mask, u32 value);
+
+static int cx23885_ir_init(struct cx23885_dev *dev)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ dprintk(1, "%s() FIXME - Implement IR support\n", __FUNCTION__);
+ break;
+ }
+
+ return 0;
+}
+
+static int cx23885_dev_setup(struct cx23885_dev *dev)
+{
+ int i;
+
+ mutex_init(&dev->lock);
+
+ atomic_inc(&dev->refcount);
+
+ dev->nr = cx23885_devcount++;
+ dev->pci_bus = dev->pci->bus->number;
+ dev->pci_slot = PCI_SLOT(dev->pci->devfn);
+ dev->pci_irqmask = 0x001f00;
+
+ /* External Master 1 Bus */
+ dev->i2c_bus[0].nr = 0;
+ dev->i2c_bus[0].dev = dev;
+ dev->i2c_bus[0].reg_stat = I2C1_STAT;
+ dev->i2c_bus[0].reg_ctrl = I2C1_CTRL;
+ dev->i2c_bus[0].reg_addr = I2C1_ADDR;
+ dev->i2c_bus[0].reg_rdata = I2C1_RDATA;
+ dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
+ dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
+
+ /* External Master 2 Bus */
+ dev->i2c_bus[1].nr = 1;
+ dev->i2c_bus[1].dev = dev;
+ dev->i2c_bus[1].reg_stat = I2C2_STAT;
+ dev->i2c_bus[1].reg_ctrl = I2C2_CTRL;
+ dev->i2c_bus[1].reg_addr = I2C2_ADDR;
+ dev->i2c_bus[1].reg_rdata = I2C2_RDATA;
+ dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
+ dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
+
+ /* Internal Master 3 Bus */
+ dev->i2c_bus[2].nr = 2;
+ dev->i2c_bus[2].dev = dev;
+ dev->i2c_bus[2].reg_stat = I2C3_STAT;
+ dev->i2c_bus[2].reg_ctrl = I2C3_CTRL;
+ dev->i2c_bus[2].reg_addr = I2C2_ADDR;
+ dev->i2c_bus[2].reg_rdata = I2C3_RDATA;
+ dev->i2c_bus[2].reg_wdata = I2C3_WDATA;
+ dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */
+
+ /* Transport bus init dma queue */
+ spin_lock_init(&dev->ts2.slock);
+ dev->ts2.dev = dev;
+ dev->ts2.nr = 2;
+ dev->ts2.sram_chno = SRAM_CH06;
+ INIT_LIST_HEAD(&dev->ts2.mpegq.active);
+ INIT_LIST_HEAD(&dev->ts2.mpegq.queued);
+ dev->ts2.mpegq.timeout.function = cx23885_timeout;
+ dev->ts2.mpegq.timeout.data = (unsigned long)&dev->ts2;
+ init_timer(&dev->ts2.mpegq.timeout);
+
+ dev->ts2.reg_gpcnt = VID_C_GPCNT;
+ dev->ts2.reg_gpcnt_ctl = VID_C_GPCNT_CTL;
+ dev->ts2.reg_dma_ctl = VID_C_DMA_CTL;
+ dev->ts2.reg_lngth = VID_C_LNGTH;
+ dev->ts2.reg_hw_sop_ctrl = VID_C_HW_SOP_CTL;
+ dev->ts2.reg_gen_ctrl = VID_C_GEN_CTL;
+ dev->ts2.reg_bd_pkt_status = VID_C_BD_PKT_STATUS;
+ dev->ts2.reg_sop_status = VID_C_SOP_STATUS;
+ dev->ts2.reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT;
+ dev->ts2.reg_vld_misc = VID_C_VLD_MISC;
+ dev->ts2.reg_ts_clk_en = VID_C_TS_CLK_EN;
+ dev->ts2.reg_ts_int_msk = VID_C_INT_MSK;
+
+ // FIXME: Make this board specific
+ dev->ts2.pci_irqmask = 0x04; /* TS Port 2 bit */
+ dev->ts2.dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */
+ dev->ts2.ts_int_msk_val = 0x1111; /* TS port bits for RISC */
+ dev->ts2.gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ dev->ts2.ts_clk_en_val = 0x1; /* Enable TS_CLK */
+
+ cx23885_risc_stopper(dev->pci, &dev->ts2.mpegq.stopper, dev->ts2.reg_dma_ctl, dev->ts2.dma_ctl_val, 0x00);
+
+ sprintf(dev->name,"cx23885[%d]", dev->nr);
+
+ if (get_resources(dev) < 0) {
+ printk(KERN_ERR "CORE %s No more PCIe resources for "
+ "subsystem: %04x:%04x\n",
+ dev->name, dev->pci->subsystem_vendor,
+ dev->pci->subsystem_device);
+
+ cx23885_devcount--;
+ goto fail_free;
+ }
+
+ mutex_lock(&devlist);
+ list_add_tail(&dev->devlist, &cx23885_devlist);
+ mutex_unlock(&devlist);
+
+ /* PCIe stuff */
+ dev->lmmio = ioremap(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0));
+
+ dev->bmmio = (u8 __iomem *)dev->lmmio;
+
+ cx23885_pci_quirks(dev);
+
+ /* board config */
+ dev->board = UNSET;
+ if (card[dev->nr] < cx23885_bcount)
+ dev->board = card[dev->nr];
+ for (i = 0; UNSET == dev->board && i < cx23885_idcount; i++)
+ if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor &&
+ dev->pci->subsystem_device == cx23885_subids[i].subdevice)
+ dev->board = cx23885_subids[i].card;
+ if (UNSET == dev->board) {
+ dev->board = CX23885_BOARD_UNKNOWN;
+ cx23885_card_list(dev);
+ }
+ printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+ dev->name, dev->pci->subsystem_vendor,
+ dev->pci->subsystem_device, cx23885_boards[dev->board].name,
+ dev->board, card[dev->nr] == dev->board ?
+ "insmod option" : "autodetected");
+
+ /* Configure the hardware internal memory for fifos */
+ switch(cx23885_boards[dev->board].bridge) {
+ case CX23885_BRIDGE_UNDEFINED:
+ case CX23885_BRIDGE_885:
+ dev->sram_channels = cx23885_sram_channels;
+ break;
+ case CX23885_BRIDGE_887:
+ dev->sram_channels = cx23887_sram_channels;
+ break;
+ default:
+ printk(KERN_ERR "%s() error, default case", __FUNCTION__ );
+ }
+
+ /* init hardware */
+ cx23885_reset(dev);
+
+ cx23885_i2c_register(&dev->i2c_bus[0]);
+ cx23885_i2c_register(&dev->i2c_bus[1]);
+ cx23885_i2c_register(&dev->i2c_bus[2]);
+ cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL);
+
+ cx23885_card_setup(dev);
+ cx23885_ir_init(dev);
+
+ if (cx23885_dvb_register(&dev->ts2) < 0) {
+ printk(KERN_ERR "%s() Failed to register dvb adapters\n", __FUNCTION__);
+ }
+
+ return 0;
+
+fail_free:
+ kfree(dev);
+ return -ENODEV;
+}
+
+void cx23885_dev_unregister(struct cx23885_dev *dev)
+{
+ release_mem_region(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0));
+
+ if (!atomic_dec_and_test(&dev->refcount))
+ return;
+
+ cx23885_dvb_unregister(&dev->ts2);
+ cx23885_i2c_unregister(&dev->i2c_bus[2]);
+ cx23885_i2c_unregister(&dev->i2c_bus[1]);
+ cx23885_i2c_unregister(&dev->i2c_bus[0]);
+
+ iounmap(dev->lmmio);
+}
+
+static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+ unsigned int offset, u32 sync_line,
+ unsigned int bpl, unsigned int padding,
+ unsigned int lines)
+{
+ struct scatterlist *sg;
+ unsigned int line,todo;
+
+ /* sync instruction */
+ if (sync_line != NO_SYNC_LINE)
+ *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
+
+ /* scan lines */
+ sg = sglist;
+ for (line = 0; line < lines; line++) {
+ while (offset && offset >= sg_dma_len(sg)) {
+ offset -= sg_dma_len(sg);
+ sg++;
+ }
+ if (bpl <= sg_dma_len(sg)-offset) {
+ /* fits into current chunk */
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl);
+ *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ offset+=bpl;
+ } else {
+ /* scanline needs to be split */
+ todo = bpl;
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|
+ (sg_dma_len(sg)-offset));
+ *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ todo -= (sg_dma_len(sg)-offset);
+ offset = 0;
+ sg++;
+ while (todo > sg_dma_len(sg)) {
+ *(rp++)=cpu_to_le32(RISC_WRITE|
+ sg_dma_len(sg));
+ *(rp++)=cpu_to_le32(sg_dma_address(sg));
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ todo -= sg_dma_len(sg);
+ sg++;
+ }
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
+ *(rp++)=cpu_to_le32(sg_dma_address(sg));
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ offset += todo;
+ }
+ offset += padding;
+ }
+
+ return rp;
+}
+
+int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+ struct scatterlist *sglist,
+ unsigned int top_offset, unsigned int bottom_offset,
+ unsigned int bpl, unsigned int padding, unsigned int lines)
+{
+ u32 instructions,fields;
+ u32 *rp;
+ int rc;
+
+ fields = 0;
+ if (UNSET != top_offset)
+ fields++;
+ if (UNSET != bottom_offset)
+ fields++;
+
+ /* estimate risc mem: worst case is one write per page border +
+ one write per scan line + syncs + jump (all 2 dwords). Padding
+ can cause next bpl to start close to a page border. First DMA
+ region may be smaller than PAGE_SIZE */
+ /* write and jump need and extra dword */
+ instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+ instructions += 2;
+ //if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
+ if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ if (UNSET != top_offset)
+ rp = cx23885_risc_field(rp, sglist, top_offset, 0,
+ bpl, padding, lines);
+ if (UNSET != bottom_offset)
+ rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
+ bpl, padding, lines);
+
+ /* save pointer to jmp instruction address */
+ risc->jmp = rp;
+ BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
+ return 0;
+}
+
+int cx23885_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+ struct scatterlist *sglist, unsigned int bpl,
+ unsigned int lines)
+{
+ u32 instructions;
+ u32 *rp;
+ int rc;
+
+ /* estimate risc mem: worst case is one write per page border +
+ one write per scan line + syncs + jump (all 2 dwords). Here
+ there is no padding and no sync. First DMA region may be smaller
+ than PAGE_SIZE */
+ /* Jump and write need an extra dword */
+ instructions = 1 + (bpl * lines) / PAGE_SIZE + lines;
+ instructions += 1;
+
+ //if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
+ if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines);
+
+ /* save pointer to jmp instruction address */
+ risc->jmp = rp;
+ BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
+ return 0;
+}
+
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+ u32 reg, u32 mask, u32 value)
+{
+ u32 *rp;
+ int rc;
+
+ if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ //*(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2 | RISC_IMM);
+ *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2);
+ *(rp++) = cpu_to_le32(reg);
+ *(rp++) = cpu_to_le32(value);
+ *(rp++) = cpu_to_le32(mask);
+ *(rp++) = cpu_to_le32(RISC_JUMP);
+ *(rp++) = cpu_to_le32(risc->dma);
+ *(rp++) = cpu_to_le32(0); /* bits 63-32 */
+ return 0;
+}
+
+void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf)
+{
+ BUG_ON(in_interrupt());
+ videobuf_waiton(&buf->vb,0,0);
+ videobuf_dma_unmap(q, &buf->vb.dma);
+ videobuf_dma_free(&buf->vb.dma);
+ btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
+ buf->vb.state = STATE_NEEDS_INIT;
+}
+
+static int cx23885_start_dma(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q,
+ struct cx23885_buffer *buf)
+{
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s() w: %d, h: %d, f: %d\n", __FUNCTION__,
+ buf->vb.width, buf->vb.height, buf->vb.field);
+
+#if SRAM
+ /* setup fifo + format */
+ cx23885_sram_channel_setup(dev,
+ &dev->sram_channels[ port->sram_chno ],
+ port->ts_packet_size, buf->risc.dma);
+ if(debug > 5)
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ] );
+#else
+ // FIXME: Put a pointer to the sram_channel table in cx23885_dev
+ // and stop all this ugly switch/if code
+ switch(cx23885_boards[dev->board].bridge) {
+ case CX23885_BRIDGE_885:
+ cx23885_sram_channel_setup(dev,
+ &cx23885_sram_channels[ port->sram_chno ],
+ port->ts_packet_size, buf->risc.dma);
+ if(debug > 5)
+ cx23885_sram_channel_dump(dev, &cx23885_sram_channels[ port->sram_chno ] );
+ break;
+ case CX23885_BRIDGE_887:
+ cx23885_sram_channel_setup(dev,
+ &cx23887_sram_channels[ port->sram_chno ],
+ port->ts_packet_size, buf->risc.dma);
+ if(debug > 5)
+ cx23885_sram_channel_dump(dev, &cx23887_sram_channels[ port->sram_chno ] );
+ break;
+ default:
+ printk(KERN_ERR "%s() error, default case", __FUNCTION__ );
+ }
+#endif
+
+ if(debug > 5)
+ cx23885_risc_disasm(port, &buf->risc);
+
+ /* write TS length to chip */
+ cx_write(port->reg_lngth, buf->vb.width);
+
+ if (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) {
+ printk( "%s() Failed. Unsupported value in .portc (0x%08x)\n", __FUNCTION__,
+ cx23885_boards[dev->board].portc );
+ return -EINVAL;
+ }
+
+ // FIXME: review the need for these two lines
+ dprintk( 1, "%s() doing .dvb\n", __FUNCTION__);
+ udelay(100);
+
+ cx_write(port->reg_hw_sop_ctrl, 0x47 << 16 | 188 << 4);
+ cx_write(port->reg_ts_clk_en, port->ts_clk_en_val);
+
+ // FIXME: review the need for this
+ cx_write(GPIO2, 0x00);
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ cx_write(port->reg_vld_misc, 0x00);
+ dprintk(1, "%s() Configuring HVR1800/lp/1500 board\n", __FUNCTION__);
+ break;
+ default:
+ // FIXME
+ printk(KERN_ERR "%s() error, default case", __FUNCTION__ );
+ }
+
+ cx_write(port->reg_gen_ctrl, port->gen_ctrl_val);
+ udelay(100);
+
+ /* reset counter to zero */
+ cx_write(port->reg_gpcnt_ctl, 3);
+ q->count = 1;
+
+ /* A bug in the current 887 implementation, causes an NMI assert during
+ * starting or stopping interrupts or dma. Avoid the bug for the time being,
+ * enabling the developer to work on the demod/tuner locking work.
+ */
+ switch(cx23885_boards[dev->board].bridge) {
+ case CX23885_BRIDGE_885:
+ /* enable irqs */
+ dprintk(1, "%s() enabling TS int's and DMA\n", __FUNCTION__ );
+ cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
+ cx_set(port->reg_dma_ctl, port->dma_ctl_val);
+ cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask);
+ break;
+ case CX23885_BRIDGE_887:
+ // FIXME
+ dprintk(1, "%s() NOT enabling TS int's and DMA, NMI bug\n", __FUNCTION__ );
+ break;
+ default:
+ // FIXME: generate a sensible switch-default message
+ printk(KERN_ERR "%s() error, default case", __FUNCTION__ );
+ }
+
+ dprintk(1, "%s() Register Dump\n", __FUNCTION__);
+ dprintk(1, "%s() set port ts_int_msk, now %x\n", __FUNCTION__, cx_read(port->reg_ts_int_msk) );
+ dprintk(1, "%s() DEV_CNTRL2 0x%08x\n", __FUNCTION__, cx_read(DEV_CNTRL2) );
+ dprintk(1, "%s() PCI_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(PCI_INT_MSK) );
+ dprintk(1, "%s() VID_A_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(VID_A_INT_MSK) );
+ dprintk(1, "%s() VID_B_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(VID_B_INT_MSK) );
+ dprintk(1, "%s() VID_C_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(VID_C_INT_MSK) );
+ dprintk(1, "%s() VID_A_DMA_CTL 0x%08x\n", __FUNCTION__, cx_read(VID_A_DMA_CTL) );
+ dprintk(1, "%s() VID_B_DMA_CTL 0x%08x\n", __FUNCTION__, cx_read(VID_B_DMA_CTL) );
+ dprintk(1, "%s() VID_C_DMA_CTL 0x%08x\n", __FUNCTION__, cx_read(VID_C_DMA_CTL) );
+ dprintk(1, "%s() AUD_INT_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(AUDIO_INT_INT_MSK) );
+ dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08x\n", __FUNCTION__, cx_read(AUD_INT_DMA_CTL) );
+ dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08x\n", __FUNCTION__, cx_read(AUDIO_EXT_INT_MSK) );
+ dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08x\n", __FUNCTION__, cx_read(AUD_EXT_DMA_CTL) );
+
+ cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */
+
+ dprintk(1, "%s() set dev_cntrl2, now %x\n", __FUNCTION__, cx_read(DEV_CNTRL2) );
+ dprintk(1, "%s() VID_C_DMA_CTL , now %x\n", __FUNCTION__, cx_read(port->reg_dma_ctl) );
+ dprintk(1, "%s() VID_C_DMA_CTL , now %x\n", __FUNCTION__, cx_read(VID_C_DMA_CTL) );
+ dprintk(1, "%s() PAD_CTRL %x\n", __FUNCTION__, cx_read(PAD_CTRL) );
+ dprintk(1, "%s() GPIO2 %x\n", __FUNCTION__, cx_read(GPIO2) );
+ dprintk(1, "%s() VID_C_LN_LNGTH , now %x\n", __FUNCTION__, cx_read(port->reg_lngth) );
+ dprintk(1, "%s() VID_C_HW_SOP_CTL, now %x\n", __FUNCTION__, cx_read(port->reg_hw_sop_ctrl) );
+ dprintk(1, "%s() VID_C_GEN_CTL , now %x\n", __FUNCTION__, cx_read(port->reg_gen_ctrl) );
+ dprintk(1, "%s() VID_C_SOP_STATUS, now %x\n", __FUNCTION__, cx_read(VID_C_SOP_STATUS) );
+ dprintk(1, "%s() VID_C_TS_CLK_EN , now %x\n", __FUNCTION__, cx_read(VID_C_TS_CLK_EN) );
+ dprintk(1, "%s() VID_C_FIFO_OVLST, now %x\n", __FUNCTION__, cx_read(VID_C_FIFO_OVFL_STAT) );
+ dprintk(1, "%s() VID_C_INT_MSTAT , now 0x%08x\n", __FUNCTION__, cx_read(VID_C_INT_MSTAT) );
+ return 0;
+}
+
+static int cx23885_stop_dma(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ /* Stop interrupts and DMA */
+ cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
+ cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
+ return 0;
+}
+
+static int cx23885_restart_queue(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_buffer *buf;
+ struct list_head *item;
+
+ dprintk(5, "%s()\n", __FUNCTION__);
+ if (list_empty(&q->active))
+ {
+ struct cx23885_buffer *prev;
+ prev = NULL;
+
+ dprintk(5, "%s() queue is empty\n", __FUNCTION__);
+
+ for (;;) {
+ if (list_empty(&q->queued))
+ return 0;
+ buf = list_entry(q->queued.next, struct cx23885_buffer, vb.queue);
+ if (NULL == prev) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&q->active);
+ cx23885_start_dma(port, q, buf);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(5,"[%p/%d] restart_queue - first active\n",
+ buf,buf->vb.i);
+
+ } else if (prev->vb.width == buf->vb.width &&
+ prev->vb.height == buf->vb.height &&
+ prev->fmt == buf->fmt) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&q->active);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */
+ dprintk(5,"[%p/%d] restart_queue - move to active\n",
+ buf,buf->vb.i);
+ } else {
+ return 0;
+ }
+ prev = buf;
+ }
+ return 0;
+ }
+
+ buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue);
+ dprintk(2,"restart_queue [%p/%d]: restart dma\n",
+ buf, buf->vb.i);
+ cx23885_start_dma(port, q, buf);
+ list_for_each(item,&q->active) {
+ buf = list_entry(item, struct cx23885_buffer, vb.queue);
+ buf->count = q->count++;
+ }
+ mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port,
+ struct cx23885_buffer *buf, enum v4l2_field field)
+{
+ struct cx23885_dev *dev = port->dev;
+ int size = port->ts_packet_size * port->ts_packet_count;
+ int rc;
+
+ dprintk(1, "%s: %p\n", __FUNCTION__, buf);
+ if (0 != buf->vb.baddr && buf->vb.bsize < size)
+ return -EINVAL;
+
+ if (STATE_NEEDS_INIT == buf->vb.state) {
+ buf->vb.width = port->ts_packet_size;
+ buf->vb.height = port->ts_packet_count;
+ buf->vb.size = size;
+ buf->vb.field = field /*V4L2_FIELD_TOP*/;
+
+ if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
+ goto fail;
+ cx23885_risc_databuffer(dev->pci, &buf->risc,
+ buf->vb.dma.sglist,
+ buf->vb.width, buf->vb.height);
+ }
+ buf->vb.state = STATE_PREPARED;
+ return 0;
+
+ fail:
+ cx23885_free_buffer(q,buf);
+ return rc;
+}
+
+void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf)
+{
+ struct cx23885_buffer *prev;
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *cx88q = &port->mpegq;
+
+ /* add jump to stopper */
+ buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+ buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma);
+ buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+ if (list_empty(&cx88q->active)) {
+ dprintk( 1, "queue is empty - first active\n" );
+ list_add_tail(&buf->vb.queue,&cx88q->active);
+ cx23885_start_dma(port, cx88q, buf);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = cx88q->count++;
+ mod_timer(&cx88q->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(1,"[%p/%d] %s - first active\n",
+ buf, buf->vb.i, __FUNCTION__);
+
+ } else {
+ dprintk( 1, "queue is not empty - append to active\n" );
+ prev = list_entry(cx88q->active.prev, struct cx23885_buffer, vb.queue);
+ list_add_tail(&buf->vb.queue,&cx88q->active);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = cx88q->count++;
+ prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */
+ dprintk( 1, "[%p/%d] %s - append to active\n",
+ buf, buf->vb.i, __FUNCTION__);
+ }
+}
+
+/* ----------------------------------------------------------- */
+
+static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, int restart)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *q = &port->mpegq;
+ struct cx23885_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->slock,flags);
+ while (!list_empty(&q->active)) {
+ buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue);
+ list_del(&buf->vb.queue);
+ buf->vb.state = STATE_ERROR;
+ wake_up(&buf->vb.done);
+ dprintk(1,"[%p/%d] %s - dma=0x%08lx\n",
+ buf, buf->vb.i, reason, (unsigned long)buf->risc.dma);
+ }
+ if (restart)
+ {
+ dprintk(1, "restarting queue\n" );
+ cx23885_restart_queue(port, q);
+ }
+ spin_unlock_irqrestore(&port->slock,flags);
+}
+
+void cx23885_cancel_buffers(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *q = &port->mpegq;
+
+ dprintk(1, "%s()\n", __FUNCTION__ );
+ del_timer_sync(&q->timeout);
+ cx23885_stop_dma(port);
+ do_cancel_buffers(port, "cancel", 0);
+}
+
+static void cx23885_timeout(unsigned long data)
+{
+ struct cx23885_tsport *port = (struct cx23885_tsport *)data;
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s()\n",__FUNCTION__);
+
+ if (debug > 5)
+#if SRAM
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]);
+#else
+ {
+ // FIXME: Put a pointer to the sram_channel table in cx23885_dev
+ // and stop all this ugly switch/if code
+ if(cx23885_boards[dev->board].bridge == CX23885_BRIDGE_885)
+ cx23885_sram_channel_dump(dev, &cx23885_sram_channels[ port->sram_chno ]);
+ if(cx23885_boards[dev->board].bridge == CX23885_BRIDGE_887)
+ cx23885_sram_channel_dump(dev, &cx23887_sram_channels[ port->sram_chno ]);
+ }
+#endif
+ cx23885_stop_dma(port);
+ do_cancel_buffers(port, "timeout", 1);
+}
+
+#define PCI_MSK_APB_DMA (1 << 12)
+#define PCI_MSK_AL_WR (1 << 11)
+#define PCI_MSK_AL_RD (1 << 10)
+#define PCI_MSK_RISC_WR (1 << 9)
+#define PCI_MSK_RISC_RD (1 << 8)
+
+#define PCI_MSK_AUD_EXT (1 << 4)
+#define PCI_MSK_AUD_INT (1 << 3)
+#define PCI_MSK_VID_C (1 << 2)
+#define PCI_MSK_VID_B (1 << 1)
+#define PCI_MSK_VID_A 1
+
+#define VID_C_MSK_BAD_PKT (1 << 20)
+#define VID_C_MSK_OPC_ERR (1 << 16)
+#define VID_C_MSK_SYNC (1 << 12)
+#define VID_C_MSK_OF (1 << 8)
+#define VID_C_MSK_RISCI2 (1 << 4)
+#define VID_C_MSK_RISCI1 1
+
+static irqreturn_t cx23885_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct cx23885_dev *dev = dev_id;
+ struct cx23885_tsport *port = &dev->ts2;
+ u32 pci_status, pci_mask;
+ u32 ts2_status, ts2_mask;
+ int count = 0, handled = 0;
+
+ pci_status = cx_read(PCI_INT_STAT);
+ pci_mask = cx_read(PCI_INT_MSK);
+
+ ts2_status = cx_read(VID_C_INT_STAT);
+ ts2_mask = cx_read(VID_C_INT_MSK);
+
+ if ( (pci_status == 0) && (ts2_status == 0) )
+ goto out;
+
+ count = cx_read(port->reg_gpcnt);
+ dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", pci_status, pci_mask );
+ dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, count );
+
+ if ( (pci_status & PCI_MSK_RISC_RD) ||
+ (pci_status & PCI_MSK_RISC_WR) ||
+ (pci_status & PCI_MSK_AL_RD) ||
+ (pci_status & PCI_MSK_AL_WR) ||
+ (pci_status & PCI_MSK_APB_DMA) ||
+ (pci_status & PCI_MSK_VID_C) ||
+ (pci_status & PCI_MSK_VID_B) ||
+ (pci_status & PCI_MSK_VID_A) ||
+ (pci_status & PCI_MSK_AUD_INT) ||
+ (pci_status & PCI_MSK_AUD_EXT) )
+ {
+
+ if (pci_status & PCI_MSK_RISC_RD)
+ dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", PCI_MSK_RISC_RD);
+ if (pci_status & PCI_MSK_RISC_WR)
+ dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", PCI_MSK_RISC_WR);
+ if (pci_status & PCI_MSK_AL_RD)
+ dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", PCI_MSK_AL_RD);
+ if (pci_status & PCI_MSK_AL_WR)
+ dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", PCI_MSK_AL_WR);
+ if (pci_status & PCI_MSK_APB_DMA)
+ dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", PCI_MSK_APB_DMA);
+ if (pci_status & PCI_MSK_VID_C)
+ dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", PCI_MSK_VID_C);
+ if (pci_status & PCI_MSK_VID_B)
+ dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", PCI_MSK_VID_B);
+ if (pci_status & PCI_MSK_VID_A)
+ dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", PCI_MSK_VID_A);
+ if (pci_status & PCI_MSK_AUD_INT)
+ dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", PCI_MSK_AUD_INT);
+ if (pci_status & PCI_MSK_AUD_EXT)
+ dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", PCI_MSK_AUD_EXT);
+
+ }
+
+ if ( (ts2_status & VID_C_MSK_OPC_ERR) ||
+ (ts2_status & VID_C_MSK_BAD_PKT) ||
+ (ts2_status & VID_C_MSK_SYNC) ||
+ (ts2_status & VID_C_MSK_OF))
+ {
+ if (ts2_status & VID_C_MSK_OPC_ERR)
+ dprintk(7, " (VID_C_MSK_OPC_ERR 0x%08x)\n", VID_C_MSK_OPC_ERR);
+ if (ts2_status & VID_C_MSK_BAD_PKT)
+ dprintk(7, " (VID_C_MSK_BAD_PKT 0x%08x)\n", VID_C_MSK_BAD_PKT);
+ if (ts2_status & VID_C_MSK_SYNC)
+ dprintk(7, " (VID_C_MSK_SYNC 0x%08x)\n", VID_C_MSK_SYNC);
+ if (ts2_status & VID_C_MSK_OF)
+ dprintk(7, " (VID_C_MSK_OF 0x%08x)\n", VID_C_MSK_OF);
+
+ printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name);
+
+ cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+#if SRAM
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]);
+#else
+ cx23885_sram_channel_dump(dev, &cx23885_sram_channels[ port->sram_chno ]);
+#endif
+
+
+ } else if (ts2_status & VID_C_MSK_RISCI1) {
+
+ dprintk(7, " (RISCI1 0x%08x)\n", VID_C_MSK_RISCI1);
+
+ spin_lock(&port->slock);
+ count = cx_read(port->reg_gpcnt);
+ cx23885_wakeup(port, &port->mpegq, count);
+ spin_unlock(&port->slock);
+
+ } else if (ts2_status & VID_C_MSK_RISCI2) {
+
+ dprintk(7, " (RISCI2 0x%08x)\n", VID_C_MSK_RISCI2);
+
+ spin_lock(&port->slock);
+ cx23885_restart_queue(port, &port->mpegq);
+ spin_unlock(&port->slock);
+
+ }
+
+ cx_write(VID_C_INT_STAT, ts2_status);
+ cx_write(PCI_INT_STAT, pci_status);
+ handled = 1;
+out:
+ return IRQ_RETVAL(handled);
+}
+
+static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ struct cx23885_dev *dev;
+ int err;
+
+ dev = kzalloc(sizeof(*dev),GFP_KERNEL);
+ if (NULL == dev)
+ return -ENOMEM;
+
+ /* pci init */
+ dev->pci = pci_dev;
+ if (pci_enable_device(pci_dev)) {
+ err = -EIO;
+ goto fail_free;
+ }
+
+ if (cx23885_dev_setup(dev) < 0) {
+ err = -EINVAL;
+ goto fail_free;
+ }
+
+ /* print pci info */
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
+ pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
+ "latency: %d, mmio: 0x%llx\n", dev->name,
+ pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+ dev->pci_lat, (unsigned long long)pci_resource_start(pci_dev,0));
+
+ pci_set_master(pci_dev);
+ if (!pci_dma_supported(pci_dev, 0xffffffff)) {
+ printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+ err = -EIO;
+ goto fail_irq;
+ }
+
+ err = request_irq(pci_dev->irq, cx23885_irq
+ , IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ if (err < 0) {
+ printk(KERN_ERR "%s: can't get IRQ %d\n",
+ dev->name, pci_dev->irq);
+ goto fail_irq;
+ }
+
+ pci_set_drvdata(pci_dev, dev);
+ return 0;
+
+fail_irq:
+ cx23885_dev_unregister(dev);
+fail_free:
+ kfree(dev);
+ return err;
+}
+
+static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
+{
+ struct cx23885_dev *dev = pci_get_drvdata(pci_dev);
+
+ cx23885_shutdown(dev);
+
+ pci_disable_device(pci_dev);
+
+ /* unregister stuff */
+ free_irq(pci_dev->irq, dev);
+ pci_set_drvdata(pci_dev, NULL);
+
+ mutex_lock(&devlist);
+ list_del(&dev->devlist);
+ mutex_unlock(&devlist);
+
+ cx23885_dev_unregister(dev);
+ kfree(dev);
+}
+
+static struct pci_device_id cx23885_pci_tbl[] = {
+ {
+ /* CX23885 */
+ .vendor = 0x14f1,
+ .device = 0x8852,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ /* CX23887 Rev 2 */
+ .vendor = 0x14f1,
+ .device = 0x8880,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ /* --- end of list --- */
+ }
+};
+MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl);
+
+static struct pci_driver cx23885_pci_driver = {
+ .name = "cx23885",
+ .id_table = cx23885_pci_tbl,
+ .probe = cx23885_initdev,
+ .remove = __devexit_p(cx23885_finidev),
+ /* TODO */
+ .suspend = NULL,
+ .resume = NULL,
+};
+
+static int cx23885_init(void)
+{
+ printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
+ (CX88_VERSION_CODE >> 16) & 0xff,
+ (CX88_VERSION_CODE >> 8) & 0xff,
+ CX88_VERSION_CODE & 0xff);
+#ifdef SNAPSHOT
+ printk(KERN_INFO "cx23885: snapshot date %04d-%02d-%02d\n",
+ SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
+#endif
+ return pci_register_driver(&cx23885_pci_driver);
+}
+
+static void cx23885_fini(void)
+{
+ pci_unregister_driver(&cx23885_pci_driver);
+}
+
+module_init(cx23885_init);
+module_exit(cx23885_fini);
+
+/* ----------------------------------------------------------- */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */
--- /dev/null
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _CX23885_REG_H_
+#define _CX23885_REG_H_
+
+
+/*
+Address Map
+0x00000000 -> 0x00009000 TX SRAM (Fifos)
+0x00010000 -> 0x00013c00 RX SRAM CMDS + CDT
+
+EACH CMDS struct is 0x80 bytes long
+
+DMAx_PTR1 = 0x03040 address of first cluster
+DMAx_PTR2 = 0x10600 address of the CDT
+DMAx_CNT1 = cluster size in (bytes >> 4) -1
+DMAx_CNT2 = total cdt size for all entries >> 3
+
+Cluster Descriptor entry = 4 DWORDS
+ DWORD 0 -> ptr to cluster
+ DWORD 1 Reserved
+ DWORD 2 Reserved
+ DWORD 3 Reserved
+
+Channel manager Data Structure entry = 20 DWORD
+ 0 IntialProgramCounterLow
+ 1 IntialProgramCounterHigh
+ 2 ClusterDescriptorTableBase
+ 3 ClusterDescriptorTableSize
+ 4 InstructionQueueBase
+ 5 InstructionQueueSize
+... Reserved
+ 19 Reserved
+
+
+*/
+
+/* Risc Instructions */
+#define RISC_CNT_INC 0x00010000
+#define RISC_CNT_RESET 0x00030000
+#define RISC_IRQ1 0x01000000
+#define RISC_IRQ2 0x02000000
+#define RISC_EOL 0x04000000
+#define RISC_SOL 0x08000000
+#define RISC_WRITE 0x10000000
+#define RISC_SKIP 0x20000000
+#define RISC_JUMP 0x70000000
+#define RISC_SYNC 0x80000000
+#define RISC_RESYNC 0x80008000
+#define RISC_READ 0x90000000
+#define RISC_WRITERM 0xB0000000
+#define RISC_WRITECM 0xC0000000
+#define RISC_WRITECR 0xD0000000
+
+//#define RISC_SYNC_ODD 0x80000000
+//#define RISC_SYNC_EVEN 0x80000200
+//#define RISC_RESYNC_ODD 0x80008000
+//#define RISC_RESYNC_EVEN 0x80008200
+
+// Do we need these?
+#define RISC_WRITEC 0x50000000
+#define RISC_READC 0xA0000000
+
+// Is this used?
+#define RISC_IMM 0x00000001
+
+//#define RISC_CNT_NONE 0x00000000
+//#define RISC_CNT_RSVR 0x00020000
+//#define RISC_JMP_SRP 0x01
+
+/* Audio and Video Core */
+#define HOST_REG1 0x00000000
+#define HOST_REG2 0x00000001
+#define HOST_REG3 0x00000002
+
+/* Chip Configuration Registers */
+#define CHIP_CTRL 0x00000100
+#define AFE_CTRL 0x00000104
+#define VID_PLL_INT_POST 0x00000108
+#define VID_PLL_FRAC 0x0000010C
+#define AUX_PLL_INT_POST 0x00000110
+#define AUX_PLL_FRAC 0x00000114
+#define SYS_PLL_INT_POST 0x00000118
+#define SYS_PLL_FRAC 0x0000011C
+#define PIN_CTRL 0x00000120
+#define AUD_IO_CTRL 0x00000124
+#define AUD_LOCK1 0x00000128
+#define AUD_LOCK2 0x0000012C
+#define POWER_CTRL 0x00000130
+#define AFE_DIAG_CTRL1 0x00000134
+#define AFE_DIAG_CTRL3 0x0000013C
+#define PLL_DIAG_CTRL 0x00000140
+#define AFE_CLK_OUT_CTRL 0x00000144
+#define DLL1_DIAG_CTRL 0x0000015C
+
+/* GPIO[23:19] Output Enable */
+#define GPIO2_OUT_EN_REG 0x00000160
+/* GPIO[23:19] Data Registers */
+#define GPIO2 0x00000164
+
+#define IFADC_CTRL 0x00000180
+
+/* Infrared Remote Registers */
+#define IR_CNTRL_REG 0x00000200
+#define IR_TXCLK_REG 0x00000204
+#define IR_RXCLK_REG 0x00000208
+#define IR_CDUTY_REG 0x0000020C
+#define IR_STAT_REG 0x00000210
+#define IR_IRQEN_REG 0x00000214
+#define IR_FILTR_REG 0x00000218
+#define IR_FIFO_REG 0x0000023C
+
+/* Video Decoder Registers */
+#define MODE_CTRL 0x00000400
+#define OUT_CTRL1 0x00000404
+#define OUT_CTRL2 0x00000408
+#define GEN_STAT 0x0000040C
+#define INT_STAT_MASK 0x00000410
+#define LUMA_CTRL 0x00000414
+#define HSCALE_CTRL 0x00000418
+#define VSCALE_CTRL 0x0000041C
+#define CHROMA_CTRL 0x00000420
+#define VBI_LINE_CTRL1 0x00000424
+#define VBI_LINE_CTRL2 0x00000428
+#define VBI_LINE_CTRL3 0x0000042C
+#define VBI_LINE_CTRL4 0x00000430
+#define VBI_LINE_CTRL5 0x00000434
+#define VBI_FC_CFG 0x00000438
+#define VBI_MISC_CFG1 0x0000043C
+#define VBI_MISC_CFG2 0x00000440
+#define VBI_PAY1 0x00000444
+#define VBI_PAY2 0x00000448
+#define VBI_CUST1_CFG1 0x0000044C
+#define VBI_CUST1_CFG2 0x00000450
+#define VBI_CUST1_CFG3 0x00000454
+#define VBI_CUST2_CFG1 0x00000458
+#define VBI_CUST2_CFG2 0x0000045C
+#define VBI_CUST2_CFG3 0x00000460
+#define VBI_CUST3_CFG1 0x00000464
+#define VBI_CUST3_CFG2 0x00000468
+#define VBI_CUST3_CFG3 0x0000046C
+#define HORIZ_TIM_CTRL 0x00000470
+#define VERT_TIM_CTRL 0x00000474
+#define SRC_COMB_CFG 0x00000478
+#define CHROMA_VBIOFF_CFG 0x0000047C
+#define FIELD_COUNT 0x00000480
+#define MISC_TIM_CTRL 0x00000484
+#define DFE_CTRL1 0x00000488
+#define DFE_CTRL2 0x0000048C
+#define DFE_CTRL3 0x00000490
+#define PLL_CTRL 0x00000494
+#define HTL_CTRL 0x00000498
+#define COMB_CTRL 0x0000049C
+#define CRUSH_CTRL 0x000004A0
+#define SOFT_RST_CTRL 0x000004A4
+#define CX885_VERSION 0x000004B4
+#define VBI_PASS_CTRL 0x000004BC
+
+/* Audio Decoder Registers */
+/* 8051 Configuration */
+#define DL_CTL 0x00000800
+#define STD_DET_STATUS 0x00000804
+#define STD_DET_CTL 0x00000808
+#define DW8051_INT 0x0000080C
+#define GENERAL_CTL 0x00000810
+#define AAGC_CTL 0x00000814
+#define DEMATRIX_CTL 0x000008CC
+#define PATH1_CTL1 0x000008D0
+#define PATH1_VOL_CTL 0x000008D4
+#define PATH1_EQ_CTL 0x000008D8
+#define PATH1_SC_CTL 0x000008DC
+#define PATH2_CTL1 0x000008E0
+#define PATH2_VOL_CTL 0x000008E4
+#define PATH2_EQ_CTL 0x000008E8
+#define PATH2_SC_CTL 0x000008EC
+
+/* Sample Rate Converter */
+#define SRC_CTL 0x000008F0
+#define SRC_LF_COEF 0x000008F4
+#define SRC1_CTL 0x000008F8
+#define SRC2_CTL 0x000008FC
+#define SRC3_CTL 0x00000900
+#define SRC4_CTL 0x00000904
+#define SRC5_CTL 0x00000908
+#define SRC6_CTL 0x0000090C
+#define BAND_OUT_SEL 0x00000910
+#define I2S_N_CTL 0x00000914
+#define I2S_OUT_CTL 0x00000918
+#define AUTOCONFIG_REG 0x000009C4
+
+/* Audio ADC Registers */
+#define DSM_CTRL1 0x00000000
+#define DSM_CTRL2 0x00000001
+#define CHP_EN_CTRL 0x00000002
+#define CHP_CLK_CTRL1 0x00000004
+#define CHP_CLK_CTRL2 0x00000005
+#define BG_REF_CTRL 0x00000006
+#define SD2_SW_CTRL1 0x00000008
+#define SD2_SW_CTRL2 0x00000009
+#define SD2_BIAS_CTRL 0x0000000A
+#define AMP_BIAS_CTRL 0x0000000C
+#define CH_PWR_CTRL1 0x0000000E
+#define CH_PWR_CTRL2 0x0000000F
+#define DSM_STATUS1 0x00000010
+#define DSM_STATUS2 0x00000011
+#define DIG_CTL1 0x00000012
+#define DIG_CTL2 0x00000013
+#define I2S_TX_CFG 0x0000001A
+
+#define DEV_CNTRL2 0x00040000
+#define PCI_INT_MSK 0x00040010
+#define PCI_MSK_APB_DMA (1 << 12)
+#define PCI_MSK_AL_WR (1 << 11)
+#define PCI_MSK_AL_RD (1 << 10)
+#define PCI_MSK_RISC_WR (1 << 9)
+#define PCI_MSK_RISC_RD (1 << 8)
+#define PCI_MSK_AUD_EXT (1 << 4)
+#define PCI_MSK_AUD_INT (1 << 3)
+#define PCI_MSK_VID_C (1 << 2)
+#define PCI_MSK_VID_B (1 << 1)
+#define PCI_MSK_VID_A 1
+#define PCI_INT_STAT 0x00040014
+#define PCI_INT_MSTAT 0x00040018
+
+#define VID_A_INT_MSK 0x00040020
+#define VID_A_INT_STAT 0x00040024
+#define VID_A_INT_MSTAT 0x00040028
+#define VID_A_INT_SSTAT 0x0004002C
+
+#define VID_B_INT_MSK 0x00040030
+#define VID_B_INT_STAT 0x00040034
+#define VID_B_INT_MSTAT 0x00040038
+#define VID_B_INT_SSTAT 0x0004003C
+
+#define VID_C_INT_MSK 0x00040040
+#define VID_C_MSK_BAD_PKT (1 << 20)
+#define VID_C_MSK_OPC_ERR (1 << 16)
+#define VID_C_MSK_SYNC (1 << 12)
+#define VID_C_MSK_OF (1 << 8)
+#define VID_C_MSK_RISCI2 (1 << 4)
+#define VID_C_MSK_RISCI1 1
+#define VID_C_INT_STAT 0x00040044
+#define VID_C_INT_MSTAT 0x00040048
+#define VID_C_INT_SSTAT 0x0004004C
+
+#define AUDIO_INT_INT_MSK 0x00040050
+#define AUDIO_INT_INT_STAT 0x00040054
+#define AUDIO_INT_INT_MSTAT 0x00040058
+#define AUDIO_INT_INT_SSTAT 0x0004005C
+
+#define AUDIO_EXT_INT_MSK 0x00040060
+#define AUDIO_EXT_INT_STAT 0x00040064
+#define AUDIO_EXT_INT_MSTAT 0x00040068
+#define AUDIO_EXT_INT_SSTAT 0x0004006C
+
+#define RDR_CFG0 0x00050000
+#define RDR_CFG1 0x00050004
+#define RDR_TLCTL0 0x00050318
+
+/* APB DMAC Current Buffer Pointer */
+#define DMA1_PTR1 0x00100000
+#define DMA2_PTR1 0x00100004
+#define DMA3_PTR1 0x00100008
+#define DMA4_PTR1 0x0010000C
+#define DMA5_PTR1 0x00100010
+#define DMA6_PTR1 0x00100014
+#define DMA7_PTR1 0x00100018
+#define DMA8_PTR1 0x0010001C
+
+/* APB DMAC Current Table Pointer */
+#define DMA1_PTR2 0x00100040
+#define DMA2_PTR2 0x00100044
+#define DMA3_PTR2 0x00100048
+#define DMA4_PTR2 0x0010004C
+#define DMA5_PTR2 0x00100050
+#define DMA6_PTR2 0x00100054
+#define DMA7_PTR2 0x00100058
+#define DMA8_PTR2 0x0010005C
+
+/* APB DMAC Buffer Limit */
+#define DMA1_CNT1 0x00100080
+#define DMA2_CNT1 0x00100084
+#define DMA3_CNT1 0x00100088
+#define DMA4_CNT1 0x0010008C
+#define DMA5_CNT1 0x00100090
+#define DMA6_CNT1 0x00100094
+#define DMA7_CNT1 0x00100098
+#define DMA8_CNT1 0x0010009C
+
+/* APB DMAC Table Size */
+#define DMA1_CNT2 0x001000C0
+#define DMA2_CNT2 0x001000C4
+#define DMA3_CNT2 0x001000C8
+#define DMA4_CNT2 0x001000CC
+#define DMA5_CNT2 0x001000D0
+#define DMA6_CNT2 0x001000D4
+#define DMA7_CNT2 0x001000D8
+#define DMA8_CNT2 0x001000DC
+
+/* Timer Counters */
+#define TM_CNT_LDW 0x00110000
+#define TM_CNT_UW 0x00110004
+#define TM_LMT_LDW 0x00110008
+#define TM_LMT_UW 0x0011000C
+
+/* GPIO */
+#define GP0_IO 0x00110010
+#define GPIO_ISM 0x00110014
+#define SOFT_RESET 0x0011001C
+
+/* GPIO (417 Microsoftcontroller) RW Data */
+#define MC417_RWD 0x00110020
+
+/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */
+#define MC417_OEN 0x00110024
+#define MC417_CTL 0x00110028
+#define CLK_DELAY 0x00110048
+#define PAD_CTRL 0x0011004C
+
+/* Video A Interface */
+#define VID_A_GPCNT 0x00130020
+#define VBI_A_GPCNT 0x00130024
+#define VID_A_GPCNT_CTL 0x00130030
+#define VBI_A_GPCNT_CTL 0x00130034
+#define VID_A_DMA_CTL 0x00130040
+#define VID_A_VIP_CTRL 0x00130080
+#define VID_A_PIXEL_FRMT 0x00130084
+#define VID_A_VBI_CTRL 0x00130088
+
+/* Video B Interface */
+#define VID_B_DMA 0x00130100
+#define VBI_B_DMA 0x00130108
+#define VID_B_GPCNT 0x00130120
+#define VBI_B_GPCNT 0x00130124
+#define VID_B_GPCNT_CTL 0x00130130
+#define VBI_B_GPCNT_CTL 0x00130134
+#define VID_B_DMA_CTL 0x00130140
+#define VID_B_SRC_SEL 0x00130144
+#define VID_B_LNGTH 0x00130150
+#define VID_B_HW_SOP_CTL 0x00130154
+#define VID_B_GEN_CTL 0x00130158
+#define VID_B_BD_PKT_STATUS 0x0013015C
+#define VID_B_SOP_STATUS 0x00130160
+#define VID_B_FIFO_OVFL_STAT 0x00130164
+#define VID_B_VLD_MISC 0x00130168
+#define VID_B_TS_CLK_EN 0x0013016C
+#define VID_B_VIP_CTRL 0x00130180
+#define VID_B_PIXEL_FRMT 0x00130184
+
+/* Video C Interface */
+#define VID_C_GPCNT 0x00130220
+#define VID_C_GPCNT_CTL 0x00130230
+#define VBI_C_GPCNT_CTL 0x00130234
+#define VID_C_DMA_CTL 0x00130240
+#define VID_C_LNGTH 0x00130250
+#define VID_C_HW_SOP_CTL 0x00130254
+#define VID_C_GEN_CTL 0x00130258
+#define VID_C_BD_PKT_STATUS 0x0013025C
+#define VID_C_SOP_STATUS 0x00130260
+#define VID_C_FIFO_OVFL_STAT 0x00130264
+#define VID_C_VLD_MISC 0x00130268
+#define VID_C_TS_CLK_EN 0x0013026C
+
+/* Internal Audio Interface */
+#define AUD_INT_A_GPCNT 0x00140020
+#define AUD_INT_B_GPCNT 0x00140024
+#define AUD_INT_A_GPCNT_CTL 0x00140030
+#define AUD_INT_B_GPCNT_CTL 0x00140034
+#define AUD_INT_DMA_CTL 0x00140040
+#define AUD_INT_A_LNGTH 0x00140050
+#define AUD_INT_B_LNGTH 0x00140054
+#define AUD_INT_A_MODE 0x00140058
+#define AUD_INT_B_MODE 0x0014005C
+
+/* External Audio Interface */
+#define AUD_EXT_DMA 0x00140100
+#define AUD_EXT_GPCNT 0x00140120
+#define AUD_EXT_GPCNT_CTL 0x00140130
+#define AUD_EXT_DMA_CTL 0x00140140
+#define AUD_EXT_LNGTH 0x00140150
+#define AUD_EXT_A_MODE 0x00140158
+
+/* I2C Bus 1 */
+#define I2C1_ADDR 0x00180000
+#define I2C1_WDATA 0x00180004
+#define I2C1_CTRL 0x00180008
+#define I2C1_RDATA 0x0018000C
+#define I2C1_STAT 0x00180010
+
+/* I2C Bus 2 */
+#define I2C2_ADDR 0x00190000
+#define I2C2_WDATA 0x00190004
+#define I2C2_CTRL 0x00190008
+#define I2C2_RDATA 0x0019000C
+#define I2C2_STAT 0x00190010
+
+/* I2C Bus 3 */
+#define I2C3_ADDR 0x001A0000
+#define I2C3_WDATA 0x001A0004
+#define I2C3_CTRL 0x001A0008
+#define I2C3_RDATA 0x001A000C
+#define I2C3_STAT 0x001A0010
+
+/* UART */
+#define UART_CTL 0x001B0000
+#define UART_BRD 0x001B0004
+#define UART_ISR 0x001B000C
+#define UART_CNT 0x001B0010
+
+#endif /* _CX23885_REG_H_ */
projects / platform / kernel / linux-rpi.git / commitdiff