board: gateworks: gw_ventana: move SPL uart config out of common

Since DM_SERIAL is used for U-Boot we no longer need legacy UART code in
common.c shared by the SPL and U-Boot. Move the legacy UART config to
the non-DM SPL.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 2be6518..6b8900e 100644 (file)
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -19,17 +19,6 @@
 
 #include "common.h"
 
-/* UART2: Serial Console */
-static iomux_v3_cfg_t const uart2_pads[] = {
-       IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-void setup_iomux_uart(void)
-{
-       SETUP_IOMUX_PADS(uart2_pads);
-}
-
 /* MMC */
 static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
        IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),

diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index 526ff06..d7f60a0 100644 (file)
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -79,8 +79,6 @@ struct ventana {
 
 extern struct ventana gpio_cfg[GW_UNKNOWN];
 
-/* configure uart iomux */
-void setup_iomux_uart(void);
 /* configure gpio iomux/defaults */
 void setup_iomux_gpio(int board, struct ventana_board_info *);
 /* late setup of GPIO (configuration per baseboard and env) */

diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 60e2768..2d6ef30 100644 (file)
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -671,6 +671,17 @@ static void ccgr_init(void)
        writel(0x000003FF, &ccm->CCGR6);
 }
 
+/* UART2: Serial Console */
+static const iomux_v3_cfg_t uart2_pads[] = {
+       IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+void setup_iomux_uart(void)
+{
+       SETUP_IOMUX_PADS(uart2_pads);
+}
+
 /*
  * I2C pad configs:
  * I2C1: GSC