ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.

Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 09c4f00..7fa71f5 100644 (file)
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -434,7 +435,20 @@ static struct platform_device *kota2_devices[] __initdata = {
        &sdhi1_device,
 };
 
+static unsigned long pin_pullup_conf[] = {
+       PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
 static const struct pinctrl_map kota2_pinctrl_map[] = {
+       /* MMCIF */
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+                                 "mmc0_data8_0", "mmc0"),
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+                                 "mmc0_ctrl_0", "mmc0"),
+       PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+                                   "PORT279", pin_pullup_conf),
+       PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+                                     "mmc0_data8_0", pin_pullup_conf),
        /* SCIFA2 (UART2) */
        PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
                                  "scifa2_data_0", "scifa2"),
@@ -452,6 +466,28 @@ static const struct pinctrl_map kota2_pinctrl_map[] = {
                                  "scifb_clk_0", "scifb"),
        PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
                                  "scifb_ctrl_0", "scifb"),
+       /* SDHI0 (microSD) */
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                 "sdhi0_data4", "sdhi0"),
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                 "sdhi0_ctrl", "sdhi0"),
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                 "sdhi0_cd", "sdhi0"),
+       PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                     "sdhi0_data4", pin_pullup_conf),
+       PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                   "PORT256", pin_pullup_conf),
+       PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+                                   "PORT251", pin_pullup_conf),
+       /* SDHI1 (BCM4330) */
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+                                 "sdhi1_data4", "sdhi1"),
+       PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+                                 "sdhi1_ctrl", "sdhi1"),
+       PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+                                     "sdhi1_data4", pin_pullup_conf),
+       PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
+                                   "PORT263", pin_pullup_conf),
 };
 
 static void __init kota2_init(void)
@@ -508,35 +544,8 @@ static void __init kota2_init(void)
        gpio_request(GPIO_FN_KEYOUT8, NULL);
 
        /* MMCIF */
-       gpio_request(GPIO_FN_MMCCLK0, NULL);
-       gpio_request(GPIO_FN_MMCD0_0, NULL);
-       gpio_request(GPIO_FN_MMCD0_1, NULL);
-       gpio_request(GPIO_FN_MMCD0_2, NULL);
-       gpio_request(GPIO_FN_MMCD0_3, NULL);
-       gpio_request(GPIO_FN_MMCD0_4, NULL);
-       gpio_request(GPIO_FN_MMCD0_5, NULL);
-       gpio_request(GPIO_FN_MMCD0_6, NULL);
-       gpio_request(GPIO_FN_MMCD0_7, NULL);
-       gpio_request(GPIO_FN_MMCCMD0, NULL);
        gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
-       /* SDHI0 (microSD) */
-       gpio_request(GPIO_FN_SDHICD0_PU, NULL);
-       gpio_request(GPIO_FN_SDHICMD0_PU, NULL);
-       gpio_request(GPIO_FN_SDHICLK0, NULL);
-       gpio_request(GPIO_FN_SDHID0_3_PU, NULL);
-       gpio_request(GPIO_FN_SDHID0_2_PU, NULL);
-       gpio_request(GPIO_FN_SDHID0_1_PU, NULL);
-       gpio_request(GPIO_FN_SDHID0_0_PU, NULL);
-
-       /* SDHI1 (BCM4330) */
-       gpio_request(GPIO_FN_SDHICLK1, NULL);
-       gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
-       gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
-       gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
-       gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
-       gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
-
 #ifdef CONFIG_CACHE_L2X0
        /* Early BRESP enable, Shared attribute override enable, 64K*8way */
        l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);