--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+#include "internals.h"
+#else
+#include <spi.h>
+#include <spi-mem.h>
+#endif
+
+#ifndef __UBOOT__
+/**
+ * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
+ * memory operation
+ * @ctlr: the SPI controller requesting this dma_map()
+ * @op: the memory operation containing the buffer to map
+ * @sgt: a pointer to a non-initialized sg_table that will be filled by this
+ * function
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares everything for you and provides a ready-to-use
+ * sg_table. This function is not intended to be called from spi drivers.
+ * Only SPI controller drivers should use it.
+ * Note that the caller must ensure the memory region pointed by
+ * op->data.buf.{in,out} is DMA-able before calling this function.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sgt)
+{
+ struct device *dmadev;
+
+ if (!op->data.nbytes)
+ return -EINVAL;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+ dmadev = ctlr->dma_tx->device->dev;
+ else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+ dmadev = ctlr->dma_rx->device->dev;
+ else
+ dmadev = ctlr->dev.parent;
+
+ if (!dmadev)
+ return -EINVAL;
+
+ return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes,
+ op->data.dir == SPI_MEM_DATA_IN ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data);
+
+/**
+ * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a
+ * memory operation
+ * @ctlr: the SPI controller requesting this dma_unmap()
+ * @op: the memory operation containing the buffer to unmap
+ * @sgt: a pointer to an sg_table previously initialized by
+ * spi_controller_dma_map_mem_op_data()
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares things so that the CPU can access the
+ * op->data.buf.{in,out} buffer again.
+ *
+ * This function is not intended to be called from SPI drivers. Only SPI
+ * controller drivers should use it.
+ *
+ * This function should be called after the DMA operation has finished and is
+ * only valid if the previous spi_controller_dma_map_mem_op_data() call
+ * returned 0.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sgt)
+{
+ struct device *dmadev;
+
+ if (!op->data.nbytes)
+ return;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+ dmadev = ctlr->dma_tx->device->dev;
+ else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+ dmadev = ctlr->dma_rx->device->dev;
+ else
+ dmadev = ctlr->dev.parent;
+
+ spi_unmap_buf(ctlr, dmadev, sgt,
+ op->data.dir == SPI_MEM_DATA_IN ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
+#endif /* __UBOOT__ */
+
+static int spi_check_buswidth_req(struct spi_slave *slave, u8 buswidth, bool tx)
+{
+ u32 mode = slave->mode;
+
+ switch (buswidth) {
+ case 1:
+ return 0;
+
+ case 2:
+ if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
+ (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+ return 0;
+
+ break;
+
+ case 4:
+ if ((tx && (mode & SPI_TX_QUAD)) ||
+ (!tx && (mode & SPI_RX_QUAD)))
+ return 0;
+
+ break;
+
+ default:
+ break;
+ }
+
+ return -ENOTSUPP;
+}
+
+bool spi_mem_default_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ if (spi_check_buswidth_req(slave, op->cmd.buswidth, true))
+ return false;
+
+ if (op->addr.nbytes &&
+ spi_check_buswidth_req(slave, op->addr.buswidth, true))
+ return false;
+
+ if (op->dummy.nbytes &&
+ spi_check_buswidth_req(slave, op->dummy.buswidth, true))
+ return false;
+
+ if (op->data.nbytes &&
+ spi_check_buswidth_req(slave, op->data.buswidth,
+ op->data.dir == SPI_MEM_DATA_OUT))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+
+/**
+ * spi_mem_supports_op() - Check if a memory device and the controller it is
+ * connected to support a specific memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to check
+ *
+ * Some controllers are only supporting Single or Dual IOs, others might only
+ * support specific opcodes, or it can even be that the controller and device
+ * both support Quad IOs but the hardware prevents you from using it because
+ * only 2 IO lines are connected.
+ *
+ * This function checks whether a specific operation is supported.
+ *
+ * Return: true if @op is supported, false otherwise.
+ */
+bool spi_mem_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ if (ops->mem_ops && ops->mem_ops->supports_op)
+ return ops->mem_ops->supports_op(slave, op);
+
+ return spi_mem_default_supports_op(slave, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+
+/**
+ * spi_mem_exec_op() - Execute a memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first checks that @op is supported and then tries to execute
+ * it.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+ unsigned int pos = 0;
+ const u8 *tx_buf = NULL;
+ u8 *rx_buf = NULL;
+ u8 *op_buf;
+ int op_len;
+ u32 flag;
+ int ret;
+ int i;
+
+ if (!spi_mem_supports_op(slave, op))
+ return -ENOTSUPP;
+
+ if (ops->mem_ops) {
+#ifndef __UBOOT__
+ /*
+ * Flush the message queue before executing our SPI memory
+ * operation to prevent preemption of regular SPI transfers.
+ */
+ spi_flush_queue(ctlr);
+
+ if (ctlr->auto_runtime_pm) {
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ dev_err(&ctlr->dev,
+ "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ mutex_lock(&ctlr->bus_lock_mutex);
+ mutex_lock(&ctlr->io_mutex);
+#endif
+ ret = ops->mem_ops->exec_op(slave, op);
+#ifndef __UBOOT__
+ mutex_unlock(&ctlr->io_mutex);
+ mutex_unlock(&ctlr->bus_lock_mutex);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+#endif
+
+ /*
+ * Some controllers only optimize specific paths (typically the
+ * read path) and expect the core to use the regular SPI
+ * interface in other cases.
+ */
+ if (!ret || ret != -ENOTSUPP)
+ return ret;
+ }
+
+#ifndef __UBOOT__
+ tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
+ /*
+ * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
+ * we're guaranteed that this buffer is DMA-able, as required by the
+ * SPI layer.
+ */
+ tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA);
+ if (!tmpbuf)
+ return -ENOMEM;
+
+ spi_message_init(&msg);
+
+ tmpbuf[0] = op->cmd.opcode;
+ xfers[xferpos].tx_buf = tmpbuf;
+ xfers[xferpos].len = sizeof(op->cmd.opcode);
+ xfers[xferpos].tx_nbits = op->cmd.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen++;
+
+ if (op->addr.nbytes) {
+ int i;
+
+ for (i = 0; i < op->addr.nbytes; i++)
+ tmpbuf[i + 1] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+
+ xfers[xferpos].tx_buf = tmpbuf + 1;
+ xfers[xferpos].len = op->addr.nbytes;
+ xfers[xferpos].tx_nbits = op->addr.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->addr.nbytes;
+ }
+
+ if (op->dummy.nbytes) {
+ memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
+ xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
+ xfers[xferpos].len = op->dummy.nbytes;
+ xfers[xferpos].tx_nbits = op->dummy.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->dummy.nbytes;
+ }
+
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ xfers[xferpos].rx_buf = op->data.buf.in;
+ xfers[xferpos].rx_nbits = op->data.buswidth;
+ } else {
+ xfers[xferpos].tx_buf = op->data.buf.out;
+ xfers[xferpos].tx_nbits = op->data.buswidth;
+ }
+
+ xfers[xferpos].len = op->data.nbytes;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->data.nbytes;
+ }
+
+ ret = spi_sync(slave, &msg);
+
+ kfree(tmpbuf);
+
+ if (ret)
+ return ret;
+
+ if (msg.actual_length != totalxferlen)
+ return -EIO;
+#else
+
+ /* U-Boot does not support parallel SPI data lanes */
+ if ((op->cmd.buswidth != 1) ||
+ (op->addr.nbytes && op->addr.buswidth != 1) ||
+ (op->dummy.nbytes && op->dummy.buswidth != 1) ||
+ (op->data.nbytes && op->data.buswidth != 1)) {
+ printf("Dual/Quad raw SPI transfers not supported\n");
+ return -ENOTSUPP;
+ }
+
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ rx_buf = op->data.buf.in;
+ else
+ tx_buf = op->data.buf.out;
+ }
+
+ op_len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+ op_buf = calloc(1, op_len);
+
+ ret = spi_claim_bus(slave);
+ if (ret < 0)
+ return ret;
+
+ op_buf[pos++] = op->cmd.opcode;
+
+ if (op->addr.nbytes) {
+ for (i = 0; i < op->addr.nbytes; i++)
+ op_buf[pos + i] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+
+ pos += op->addr.nbytes;
+ }
+
+ if (op->dummy.nbytes)
+ memset(op_buf + pos, 0xff, op->dummy.nbytes);
+
+ /* 1st transfer: opcode + address + dummy cycles */
+ flag = SPI_XFER_BEGIN;
+ /* Make sure to set END bit if no tx or rx data messages follow */
+ if (!tx_buf && !rx_buf)
+ flag |= SPI_XFER_END;
+
+ ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag);
+ if (ret)
+ return ret;
+
+ /* 2nd transfer: rx or tx data path */
+ if (tx_buf || rx_buf) {
+ ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf,
+ rx_buf, SPI_XFER_END);
+ if (ret)
+ return ret;
+ }
+
+ spi_release_bus(slave);
+
+ for (i = 0; i < pos; i++)
+ debug("%02x ", op_buf[i]);
+ debug("| [%dB %s] ",
+ tx_buf || rx_buf ? op->data.nbytes : 0,
+ tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-");
+ for (i = 0; i < op->data.nbytes; i++)
+ debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]);
+ debug("[ret %d]\n", ret);
+
+ free(op_buf);
+
+ if (ret < 0)
+ return ret;
+#endif /* __UBOOT__ */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_exec_op);
+
+/**
+ * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
+ * match controller limitations
+ * @slave: the SPI device
+ * @op: the operation to adjust
+ *
+ * Some controllers have FIFO limitations and must split a data transfer
+ * operation into multiple ones, others require a specific alignment for
+ * optimized accesses. This function allows SPI mem drivers to split a single
+ * operation into multiple sub-operations when required.
+ *
+ * Return: a negative error code if the controller can't properly adjust @op,
+ * 0 otherwise. Note that @op->data.nbytes will be updated if @op
+ * can't be handled in a single step.
+ */
+int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ if (ops->mem_ops && ops->mem_ops->adjust_op_size)
+ return ops->mem_ops->adjust_op_size(slave, op);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+
+#ifndef __UBOOT__
+static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
+{
+ return container_of(drv, struct spi_mem_driver, spidrv.driver);
+}
+
+static int spi_mem_probe(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem;
+
+ mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+
+ mem->spi = spi;
+ spi_set_drvdata(spi, mem);
+
+ return memdrv->probe(mem);
+}
+
+static int spi_mem_remove(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem = spi_get_drvdata(spi);
+
+ if (memdrv->remove)
+ return memdrv->remove(mem);
+
+ return 0;
+}
+
+static void spi_mem_shutdown(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem = spi_get_drvdata(spi);
+
+ if (memdrv->shutdown)
+ memdrv->shutdown(mem);
+}
+
+/**
+ * spi_mem_driver_register_with_owner() - Register a SPI memory driver
+ * @memdrv: the SPI memory driver to register
+ * @owner: the owner of this driver
+ *
+ * Registers a SPI memory driver.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv,
+ struct module *owner)
+{
+ memdrv->spidrv.probe = spi_mem_probe;
+ memdrv->spidrv.remove = spi_mem_remove;
+ memdrv->spidrv.shutdown = spi_mem_shutdown;
+
+ return __spi_register_driver(owner, &memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner);
+
+/**
+ * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver
+ * @memdrv: the SPI memory driver to unregister
+ *
+ * Unregisters a SPI memory driver.
+ */
+void spi_mem_driver_unregister(struct spi_mem_driver *memdrv)
+{
+ spi_unregister_driver(&memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_unregister);
+#endif /* __UBOOT__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author:
+ * Peter Pan <peterpandong@micron.com>
+ * Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT_SPI_MEM_H
+#define __UBOOT_SPI_MEM_H
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <spi.h>
+
+#define SPI_MEM_OP_CMD(__opcode, __buswidth) \
+ { \
+ .buswidth = __buswidth, \
+ .opcode = __opcode, \
+ }
+
+#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \
+ { \
+ .nbytes = __nbytes, \
+ .val = __val, \
+ .buswidth = __buswidth, \
+ }
+
+#define SPI_MEM_OP_NO_ADDR { }
+
+#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth) \
+ { \
+ .nbytes = __nbytes, \
+ .buswidth = __buswidth, \
+ }
+
+#define SPI_MEM_OP_NO_DUMMY { }
+
+#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth) \
+ { \
+ .dir = SPI_MEM_DATA_IN, \
+ .nbytes = __nbytes, \
+ .buf.in = __buf, \
+ .buswidth = __buswidth, \
+ }
+
+#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth) \
+ { \
+ .dir = SPI_MEM_DATA_OUT, \
+ .nbytes = __nbytes, \
+ .buf.out = __buf, \
+ .buswidth = __buswidth, \
+ }
+
+#define SPI_MEM_OP_NO_DATA { }
+
+/**
+ * enum spi_mem_data_dir - describes the direction of a SPI memory data
+ * transfer from the controller perspective
+ * @SPI_MEM_DATA_IN: data coming from the SPI memory
+ * @SPI_MEM_DATA_OUT: data sent the SPI memory
+ */
+enum spi_mem_data_dir {
+ SPI_MEM_DATA_IN,
+ SPI_MEM_DATA_OUT,
+};
+
+/**
+ * struct spi_mem_op - describes a SPI memory operation
+ * @cmd.buswidth: number of IO lines used to transmit the command
+ * @cmd.opcode: operation opcode
+ * @addr.nbytes: number of address bytes to send. Can be zero if the operation
+ * does not need to send an address
+ * @addr.buswidth: number of IO lines used to transmit the address cycles
+ * @addr.val: address value. This value is always sent MSB first on the bus.
+ * Note that only @addr.nbytes are taken into account in this
+ * address value, so users should make sure the value fits in the
+ * assigned number of bytes.
+ * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
+ * be zero if the operation does not require dummy bytes
+ * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dir: direction of the transfer
+ * @data.buf.in: input buffer
+ * @data.buf.out: output buffer
+ */
+struct spi_mem_op {
+ struct {
+ u8 buswidth;
+ u8 opcode;
+ } cmd;
+
+ struct {
+ u8 nbytes;
+ u8 buswidth;
+ u64 val;
+ } addr;
+
+ struct {
+ u8 nbytes;
+ u8 buswidth;
+ } dummy;
+
+ struct {
+ u8 buswidth;
+ enum spi_mem_data_dir dir;
+ unsigned int nbytes;
+ /* buf.{in,out} must be DMA-able. */
+ union {
+ void *in;
+ const void *out;
+ } buf;
+ } data;
+};
+
+#define SPI_MEM_OP(__cmd, __addr, __dummy, __data) \
+ { \
+ .cmd = __cmd, \
+ .addr = __addr, \
+ .dummy = __dummy, \
+ .data = __data, \
+ }
+
+#ifndef __UBOOT__
+/**
+ * struct spi_mem - describes a SPI memory device
+ * @spi: the underlying SPI device
+ * @drvpriv: spi_mem_driver private data
+ *
+ * Extra information that describe the SPI memory device and may be needed by
+ * the controller to properly handle this device should be placed here.
+ *
+ * One example would be the device size since some controller expose their SPI
+ * mem devices through a io-mapped region.
+ */
+struct spi_mem {
+ struct udevice *dev;
+ void *drvpriv;
+};
+
+/**
+ * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem
+ * device
+ * @mem: memory device
+ * @data: data to attach to the memory device
+ */
+static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data)
+{
+ mem->drvpriv = data;
+}
+
+/**
+ * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem
+ * device
+ * @mem: memory device
+ *
+ * Return: the data attached to the mem device.
+ */
+static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
+{
+ return mem->drvpriv;
+}
+#endif /* __UBOOT__ */
+
+/**
+ * struct spi_controller_mem_ops - SPI memory operations
+ * @adjust_op_size: shrink the data xfer of an operation to match controller's
+ * limitations (can be alignment of max RX/TX size
+ * limitations)
+ * @supports_op: check if an operation is supported by the controller
+ * @exec_op: execute a SPI memory operation
+ *
+ * This interface should be implemented by SPI controllers providing an
+ * high-level interface to execute SPI memory operation, which is usually the
+ * case for QSPI controllers.
+ */
+struct spi_controller_mem_ops {
+ int (*adjust_op_size)(struct spi_slave *slave, struct spi_mem_op *op);
+ bool (*supports_op)(struct spi_slave *slave,
+ const struct spi_mem_op *op);
+ int (*exec_op)(struct spi_slave *slave,
+ const struct spi_mem_op *op);
+};
+
+#ifndef __UBOOT__
+/**
+ * struct spi_mem_driver - SPI memory driver
+ * @spidrv: inherit from a SPI driver
+ * @probe: probe a SPI memory. Usually where detection/initialization takes
+ * place
+ * @remove: remove a SPI memory
+ * @shutdown: take appropriate action when the system is shutdown
+ *
+ * This is just a thin wrapper around a spi_driver. The core takes care of
+ * allocating the spi_mem object and forwarding the probe/remove/shutdown
+ * request to the spi_mem_driver. The reason we use this wrapper is because
+ * we might have to stuff more information into the spi_mem struct to let
+ * SPI controllers know more about the SPI memory they interact with, and
+ * having this intermediate layer allows us to do that without adding more
+ * useless fields to the spi_device object.
+ */
+struct spi_mem_driver {
+ struct spi_driver spidrv;
+ int (*probe)(struct spi_mem *mem);
+ int (*remove)(struct spi_mem *mem);
+ void (*shutdown)(struct spi_mem *mem);
+};
+
+#if IS_ENABLED(CONFIG_SPI_MEM)
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sg);
+
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sg);
+#else
+static inline int
+spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sg)
+{
+ return -ENOTSUPP;
+}
+
+static inline void
+spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sg)
+{
+}
+#endif /* CONFIG_SPI_MEM */
+#endif /* __UBOOT__ */
+
+int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op);
+
+bool spi_mem_supports_op(struct spi_slave *slave, const struct spi_mem_op *op);
+
+int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op);
+
+#ifndef __UBOOT__
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
+ struct module *owner);
+
+void spi_mem_driver_unregister(struct spi_mem_driver *drv);
+
+#define spi_mem_driver_register(__drv) \
+ spi_mem_driver_register_with_owner(__drv, THIS_MODULE)
+
+#define module_spi_mem_driver(__drv) \
+ module_driver(__drv, spi_mem_driver_register, \
+ spi_mem_driver_unregister)
+#endif
+
+#endif /* __LINUX_SPI_MEM_H */
projects / platform / kernel / u-boot.git / commitdiff