drivers/net/rtl8139.c: Fix tx timeout
authorShinya Kuribayashi <shinya.kuribayashi@necel.com>
Wed, 16 Jan 2008 07:11:14 +0000 (16:11 +0900)
committerBen Warren <biggerbadderben@gmail.com>
Wed, 16 Jan 2008 22:37:35 +0000 (17:37 -0500)
"to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
does, the condition "(currticks() < to)" becomes invalid and immediately
leads to tx timeout error. This patch introduces the fine-graded udely(10)
loops to ease the impact of wrapping around.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Masami Komiya <mkomiya@sonare.it>
Cc: Lucas Jin <lucasjin@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/rtl8139.c

index 4c24805..5d7ae74 100644 (file)
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
        defined(CONFIG_RTL8139)
 
-#define TICKS_PER_SEC  CFG_HZ
-#define TICKS_PER_MS   (TICKS_PER_SEC/1000)
-
-#define RTL_TIMEOUT    (1*TICKS_PER_SEC)
+#define RTL_TIMEOUT    100000
 
 #define ETH_FRAME_LEN          1514
 #define ETH_ALEN               6
@@ -414,9 +411,10 @@ static void rtl_reset(struct eth_device *dev)
 
 static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
 {
-       unsigned int status, to;
+       unsigned int status;
        unsigned long txstatus;
        unsigned int len = length;
+       int i = 0;
 
        ioaddr = dev->iobase;
 
@@ -436,8 +434,6 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
        outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
                ioaddr + TxStatus0 + cur_tx*4);
 
-       to = currticks() + RTL_TIMEOUT;
-
        do {
                status = inw(ioaddr + IntrStatus);
                /* Only acknlowledge interrupt sources we can properly handle
@@ -445,7 +441,8 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
                 * rtl_poll() function.  */
                outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
                if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
-       } while (currticks() < to);
+               udelay(10);
+       } while (i++ < RTL_TIMEOUT);
 
        txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
 
@@ -458,8 +455,8 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
                return length;
        } else {
 #ifdef DEBUG_TX
-               printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
-                       currticks()-to, status, txstatus);
+               printf("tx timeout/error (%d usecs), status %hX txstatus %X\n",
+                      10*i, status, txstatus);
 #endif
                rtl_reset(dev);