Since commit [
e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [
b738a50a:
genirq: Warn when handler enables interrupts]).
So now this flag is a NOOP and can be removed.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
- "Erase Config", NULL))
+ if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
irq);
else
static struct irqaction cayman_action_smsc = {
.name = "Cayman SMSC Mux",
.handler = cayman_interrupt_smsc,
- .flags = IRQF_DISABLED,
};
static struct irqaction cayman_action_pci2 = {
.name = "Cayman PCI2 Mux",
.handler = cayman_interrupt_pci2,
- .flags = IRQF_DISABLED,
};
static void enable_cayman_irq(struct irq_data *data)
int ret;
ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- IRQF_DISABLED, MODNAME, NULL);
+ 0, MODNAME, NULL);
if (unlikely(ret < 0)) {
printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
HP680_BTN_IRQ);
{
int ret;
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
"g2 DMA handler", &g2_dma_info);
if (unlikely(ret))
return -EINVAL;
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
chan->dev_id, chan);
}
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
dmae_name[n], (void *)dmae_name[n]);
if (unlikely(i < 0)) {
or = __raw_readl(DMAOR);
__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
- ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI0, dmabrg_irq, 0,
"DMABRG USB address error", NULL);
if (ret)
goto out0;
- ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI1, dmabrg_irq, 0,
"DMABRG Transfer End", NULL);
if (ret)
goto out1;
- ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI2, dmabrg_irq, 0,
"DMABRG Transfer Half", NULL);
if (ret == 0)
return ret;
u32 uval;
if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ 0, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ 0, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
PCI_STATUS_SIG_TARGET_ABORT | \
PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
"PCI SERR interrupt", hose);
if (unlikely(ret)) {
printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
BUG_ON(!psw_info);
ret = request_irq(irq, psw_info->irq_handler,
- IRQF_DISABLED | psw_info->irq_flags,
+ psw_info->irq_flags,
psw_info->name ? psw_info->name : DRV_NAME, pdev);
if (unlikely(ret < 0))
goto err;
for (i = 0; i < SMP_MSG_NR; i++)
request_irq(104 + i, ipi_interrupt_handler,
- IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+ IRQF_PERCPU, "IPI", (void *)(long)i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);