return -EBUSY;
}
- err = snd_wss_create(card, port[dev], cport[dev],
+ err = snd_cs4236_create(card, port[dev], cport[dev],
irq[dev],
dma1[dev], dma2[dev],
WSS_HW_DETECT3, 0, &chip);
if (err < 0)
return err;
+
+ acard->chip = chip;
if (chip->hardware & WSS_HW_CS4236B_MASK) {
- snd_wss_free(chip);
- err = snd_cs4236_create(card,
- port[dev], cport[dev],
- irq[dev], dma1[dev], dma2[dev],
- WSS_HW_DETECT, 0, &chip);
- if (err < 0)
- return err;
- acard->chip = chip;
err = snd_cs4236_pcm(chip, 0, &pcm);
if (err < 0)
if (err < 0)
return err;
} else {
- acard->chip = chip;
err = snd_wss_pcm(chip, 0, &pcm);
if (err < 0)
return err;
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/asoundef.h>
+#include <sound/initval.h>
/*
*
}
#endif /* CONFIG_PM */
-
+/*
+ * This function does no fail if the chip is not CS4236B or compatible.
+ * It just an equivalent to the snd_wss_create() then.
+ */
int snd_cs4236_create(struct snd_card *card,
unsigned long port,
unsigned long cport,
*rchip = NULL;
if (hardware == WSS_HW_DETECT)
hardware = WSS_HW_DETECT3;
- if (cport < 0x100) {
- snd_printk(KERN_ERR "please, specify control port "
- "for CS4236+ chips\n");
- return -ENODEV;
- }
+
err = snd_wss_create(card, port, cport,
irq, dma1, dma2, hardware, hwshare, &chip);
if (err < 0)
return err;
- if (!(chip->hardware & WSS_HW_CS4236B_MASK)) {
- snd_printk(KERN_ERR "CS4236+: MODE3 and extended registers "
- "not available, hardware=0x%x\n", chip->hardware);
- snd_device_free(card, chip);
- return -ENODEV;
+ if ((chip->hardware & WSS_HW_CS4236B_MASK) == 0) {
+ snd_printd("chip is not CS4236+, hardware=0x%x\n",
+ chip->hardware);
+ *rchip = chip;
+ return 0;
}
#if 0
{
idx, snd_cs4236_ctrl_in(chip, idx));
}
#endif
+ if (cport < 0x100 || cport == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "please, specify control port "
+ "for CS4236+ chips\n");
+ snd_device_free(card, chip);
+ return -ENODEV;
+ }
ver1 = snd_cs4236_ctrl_in(chip, 1);
ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
- snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport, ver1, ver2);
+ snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n",
+ cport, ver1, ver2);
if (ver1 != ver2) {
snd_printk(KERN_ERR "CS4236+ chip detected, but "
"control port 0x%lx is not valid\n", cport);
snd_cs4236_ctrl_out(chip, 2, 0xff);
snd_cs4236_ctrl_out(chip, 3, 0x00);
snd_cs4236_ctrl_out(chip, 4, 0x80);
- snd_cs4236_ctrl_out(chip, 5, ((IEC958_AES1_CON_PCM_CODER & 3) << 6) | IEC958_AES0_CON_EMPHASIS_NONE);
+ reg = ((IEC958_AES1_CON_PCM_CODER & 3) << 6) |
+ IEC958_AES0_CON_EMPHASIS_NONE;
+ snd_cs4236_ctrl_out(chip, 5, reg);
snd_cs4236_ctrl_out(chip, 6, IEC958_AES1_CON_PCM_CODER >> 2);
snd_cs4236_ctrl_out(chip, 7, 0x00);
- /* 0x8c for C8 is valid for Turtle Beach Malibu - the IEC-958 output */
- /* is working with this setup, other hardware should have */
- /* different signal paths and this value should be selectable */
- /* in the future */
+ /*
+ * 0x8c for C8 is valid for Turtle Beach Malibu - the IEC-958
+ * output is working with this setup, other hardware should
+ * have different signal paths and this value should be
+ * selectable in the future
+ */
snd_cs4236_ctrl_out(chip, 8, 0x8c);
chip->rate_constraint = snd_cs4236_xrate;
chip->set_playback_format = snd_cs4236_playback_format;
/* initialize extended registers */
for (reg = 0; reg < sizeof(snd_cs4236_ext_map); reg++)
- snd_cs4236_ext_out(chip, CS4236_I23VAL(reg), snd_cs4236_ext_map[reg]);
+ snd_cs4236_ext_out(chip, CS4236_I23VAL(reg),
+ snd_cs4236_ext_map[reg]);
- /* initialize compatible but more featured registers */
+ /* initialize compatible but more featured registers */
snd_wss_out(chip, CS4231_LEFT_INPUT, 0x40);
snd_wss_out(chip, CS4231_RIGHT_INPUT, 0x40);
snd_wss_out(chip, CS4231_AUX1_LEFT_INPUT, 0xff);