ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Sun, 9 Jun 2013 08:41:22 +0000 (10:41 +0200)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Wed, 19 Jun 2013 09:01:39 +0000 (11:01 +0200)
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Emilio López <emilio@elopez.com.ar>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts [new file with mode: 0644]

index b9f7121..9d6e5a4 100644 (file)
@@ -179,6 +179,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
        sun4i-a10-hackberry.dtb \
+       sun5i-a10s-olinuxino-micro.dtb \
        sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
        tegra20-iris-512.dtb \
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
new file mode 100644 (file)
index 0000000..64dc0c4
--- /dev/null
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+
+/ {
+       model = "Olimex A10s-Olinuxino Micro";
+       compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+       soc@01c20000 {
+               emac: ethernet@01c0b000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&emac_pins_a>;
+                       phy = <&phy1>;
+                       status = "okay";
+               };
+
+               mdio@01c0b080 {
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+
+               pinctrl@01c20800 {
+                       led_pins_olinuxino: led_pins@0 {
+                               allwinner,pins = "PE3";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <1>;
+                               allwinner,pull = <0>;
+                       };
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               uart2: serial@01c28800 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart2_pins_a>;
+                       status = "okay";
+               };
+
+               uart3: serial@01c28c00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart3_pins_a>;
+                       status = "okay";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxino>;
+
+               green {
+                       label = "a10s-olinuxino-micro:green:usr";
+                       gpios = <&pio 4 3 0>;
+                       default-state = "on";
+               };
+       };
+};