arm64: dts: qcom: msm8998-fxtec: Decouple from 8998 MTP

While the Pro-1 is based on MTP and is very close to it, it's really not great
for it to include the MTP dtsi straight up, as any small change will affect
both boards and not all of them will apply to the phone as well.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430162353.607709-13-konrad.dybcio@somainline.org

diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index f61ea651b0eb6377c24a804277b9454e1f19c901..adbb933f4cd1b1578b39c06f32258d87e4d19aeb 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -9,7 +9,10 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include "msm8998-mtp.dtsi"
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
 
 / {
        model = "F(x)tec Pro1 (QX1000)";
@@ -17,6 +20,11 @@
        chassis-type = "handset";
        qcom,board-id = <0x02000b 0x10>;
 
+       aliases {
+               serial0 = &blsp2_uart1;
+               serial1 = &blsp1_uart3;
+       };
+
        /*
         * Until we hook up type-c detection, we
         * have to stick with this. But it works.
@@ -186,6 +194,53 @@
                pinctrl-0 = <&ts_vio_default>;
                regulator-always-on;
        };
+
+       vph_pwr: vph-pwr-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vph_pwr";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+};
+
+&blsp1_uart3 {
+       status = "okay";
+
+       bluetooth {
+               compatible = "qcom,wcn3990-bt";
+
+               vddio-supply = <&vreg_s4a_1p8>;
+               vddxo-supply = <&vreg_l7a_1p8>;
+               vddrf-supply = <&vreg_l17a_1p3>;
+               vddch0-supply = <&vreg_l25a_3p3>;
+               max-speed = <3200000>;
+       };
+};
+
+&blsp1_uart3_on {
+       rx {
+               /delete-property/ bias-disable;
+               /*
+                * Configure a pull-up on 45 (RX). This is needed to
+                * avoid garbage data when the TX pin of the Bluetooth
+                * module is in tri-state (module powered off or not
+                * driving the signal yet).
+                */
+               bias-pull-up;
+       };
+
+       cts {
+               /delete-property/ bias-disable;
+               /*
+                * Configure a pull-down on 47 (CTS) to match the pull
+                * of the Bluetooth module.
+                */
+               bias-pull-down;
+       };
+};
+
+&blsp2_uart1 {
+       status = "okay";
 };
 
 &blsp2_i2c1 {
@@ -204,6 +259,91 @@
        };
 };
 
+&etf {
+       status = "okay";
+};
+
+&etm1 {
+       status = "okay";
+};
+
+&etm2 {
+       status = "okay";
+};
+
+&etm3 {
+       status = "okay";
+};
+
+&etm4 {
+       status = "okay";
+};
+
+&etm5 {
+       status = "okay";
+};
+
+&etm6 {
+       status = "okay";
+};
+
+&etm7 {
+       status = "okay";
+};
+
+&etm8 {
+       status = "okay";
+};
+
+&etr {
+       status = "okay";
+};
+
+&funnel1 {
+       status = "okay";
+};
+
+&funnel2 {
+       status = "okay";
+};
+
+&funnel3 {
+       status = "okay";
+};
+
+&funnel4 {
+       // FIXME: Figure out why clock late_initcall crashes the board with
+       // this enabled.
+       // status = "okay";
+};
+
+&funnel5 {
+       // FIXME: Figure out why clock late_initcall crashes the board with
+       // this enabled.
+       // status = "okay";
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
+&pm8005_regulators {
+       vdd_s1-supply = <&vph_pwr>;
+
+       pm8005_s1: s1 { /* VDD_GFX supply */
+               regulator-min-microvolt = <524000>;
+               regulator-max-microvolt = <1100000>;
+               regulator-enable-ramp-delay = <500>;
+
+               /* Hack until we rig up the gpu consumer */
+               regulator-always-on;
+       };
+};
+
 &pm8998_gpio {
        vol_up_pin_a: vol-up-active {
                pins = "gpio6";
@@ -240,6 +380,240 @@
        };
 };
 
+&qusb2phy {
+       status = "okay";
+
+       vdda-pll-supply = <&vreg_l12a_1p8>;
+       vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+       status = "okay";
+};
+
+&rpm_requests {
+       pm8998-regulators {
+               compatible = "qcom,rpm-pm8998-regulators";
+
+               vdd_s1-supply = <&vph_pwr>;
+               vdd_s2-supply = <&vph_pwr>;
+               vdd_s3-supply = <&vph_pwr>;
+               vdd_s4-supply = <&vph_pwr>;
+               vdd_s5-supply = <&vph_pwr>;
+               vdd_s6-supply = <&vph_pwr>;
+               vdd_s7-supply = <&vph_pwr>;
+               vdd_s8-supply = <&vph_pwr>;
+               vdd_s9-supply = <&vph_pwr>;
+               vdd_s10-supply = <&vph_pwr>;
+               vdd_s11-supply = <&vph_pwr>;
+               vdd_s12-supply = <&vph_pwr>;
+               vdd_s13-supply = <&vph_pwr>;
+               vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+               vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+               vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+               vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+               vdd_l6-supply = <&vreg_s5a_2p04>;
+               vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+               vdd_l9-supply = <&vreg_bob>;
+               vdd_l10_l23_l25-supply = <&vreg_bob>;
+               vdd_l13_l19_l21-supply = <&vreg_bob>;
+               vdd_l16_l28-supply = <&vreg_bob>;
+               vdd_l18_l22-supply = <&vreg_bob>;
+               vdd_l20_l24-supply = <&vreg_bob>;
+               vdd_l26-supply = <&vreg_s3a_1p35>;
+               vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+               vreg_s3a_1p35: s3 {
+                       regulator-min-microvolt = <1352000>;
+                       regulator-max-microvolt = <1352000>;
+               };
+
+               vreg_s4a_1p8: s4 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-allow-set-load;
+               };
+
+               vreg_s5a_2p04: s5 {
+                       regulator-min-microvolt = <1904000>;
+                       regulator-max-microvolt = <2040000>;
+               };
+
+               vreg_s7a_1p025: s7 {
+                       regulator-min-microvolt = <900000>;
+                       regulator-max-microvolt = <1028000>;
+               };
+
+               vreg_l1a_0p875: l1 {
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+               };
+
+               vreg_l2a_1p2: l2 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               vreg_l3a_1p0: l3 {
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1000000>;
+               };
+
+               vreg_l5a_0p8: l5 {
+                       regulator-min-microvolt = <800000>;
+                       regulator-max-microvolt = <800000>;
+               };
+
+               vreg_l6a_1p8: l6 {
+                       regulator-min-microvolt = <1808000>;
+                       regulator-max-microvolt = <1808000>;
+               };
+
+               vreg_l7a_1p8: l7 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               vreg_l8a_1p2: l8 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               vreg_l9a_1p8: l9 {
+                       regulator-min-microvolt = <1808000>;
+                       regulator-max-microvolt = <2960000>;
+               };
+
+               vreg_l10a_1p8: l10 {
+                       regulator-min-microvolt = <1808000>;
+                       regulator-max-microvolt = <2960000>;
+               };
+
+               vreg_l11a_1p0: l11 {
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1000000>;
+               };
+
+               vreg_l12a_1p8: l12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               vreg_l13a_2p95: l13 {
+                       regulator-min-microvolt = <1808000>;
+                       regulator-max-microvolt = <2960000>;
+               };
+
+               vreg_l14a_1p88: l14 {
+                       regulator-min-microvolt = <1880000>;
+                       regulator-max-microvolt = <1880000>;
+               };
+
+               vreg_l15a_1p8: l15 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               vreg_l16a_2p7: l16 {
+                       regulator-min-microvolt = <2704000>;
+                       regulator-max-microvolt = <2704000>;
+               };
+
+               vreg_l17a_1p3: l17 {
+                       regulator-min-microvolt = <1304000>;
+                       regulator-max-microvolt = <1304000>;
+               };
+
+               vreg_l18a_2p7: l18 {
+                       regulator-min-microvolt = <2704000>;
+                       regulator-max-microvolt = <2704000>;
+               };
+
+               vreg_l19a_3p0: l19 {
+                       regulator-min-microvolt = <3008000>;
+                       regulator-max-microvolt = <3008000>;
+               };
+
+               vreg_l20a_2p95: l20 {
+                       regulator-min-microvolt = <2960000>;
+                       regulator-max-microvolt = <2960000>;
+                       regulator-allow-set-load;
+               };
+
+               vreg_l21a_2p95: l21 {
+                       regulator-min-microvolt = <2960000>;
+                       regulator-max-microvolt = <2960000>;
+                       regulator-system-load = <800000>;
+                       regulator-allow-set-load;
+               };
+
+               vreg_l22a_2p85: l22 {
+                       regulator-min-microvolt = <2864000>;
+                       regulator-max-microvolt = <2864000>;
+               };
+
+               vreg_l23a_3p3: l23 {
+                       regulator-min-microvolt = <3312000>;
+                       regulator-max-microvolt = <3312000>;
+               };
+
+               vreg_l24a_3p075: l24 {
+                       regulator-min-microvolt = <3088000>;
+                       regulator-max-microvolt = <3088000>;
+               };
+
+               vreg_l25a_3p3: l25 {
+                       regulator-min-microvolt = <3104000>;
+                       regulator-max-microvolt = <3312000>;
+               };
+
+               vreg_l26a_1p2: l26 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-allow-set-load;
+               };
+
+               vreg_l28_3p0: l28 {
+                       regulator-min-microvolt = <3008000>;
+                       regulator-max-microvolt = <3008000>;
+               };
+
+               vreg_lvs1a_1p8: lvs1 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               vreg_lvs2a_1p8: lvs2 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+       };
+
+       pmi8998-regulators {
+               compatible = "qcom,rpm-pmi8998-regulators";
+
+               vdd_bob-supply = <&vph_pwr>;
+
+               vreg_bob: bob {
+                       regulator-min-microvolt = <3312000>;
+                       regulator-max-microvolt = <3600000>;
+               };
+       };
+};
+
+&remoteproc_adsp {
+       status = "okay";
+};
+
+&remoteproc_mss {
+       status = "okay";
+};
+
+&remoteproc_slpi {
+       status = "okay";
+};
+
 &tlmm {
        gpio-reserved-ranges = <0 4>;
 
@@ -288,12 +662,41 @@
        };
 };
 
+&sdhc2 {
+       status = "okay";
+       cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+       vmmc-supply = <&vreg_l21a_2p95>;
+       vqmmc-supply = <&vreg_l13a_2p95>;
+
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc2_on &sdc2_cd>;
+       pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+       status = "okay";
+};
+
 &ufshc {
        status = "okay";
+       vcc-supply = <&vreg_l20a_2p95>;
+       vccq-supply = <&vreg_l26a_1p2>;
+       vccq2-supply = <&vreg_s4a_1p8>;
+       vcc-max-microamp = <750000>;
+       vccq-max-microamp = <560000>;
+       vccq2-max-microamp = <750000>;
 };
 
 &ufsphy {
        status = "okay";
+       vdda-phy-supply = <&vreg_l1a_0p875>;
+       vdda-pll-supply = <&vreg_l2a_1p2>;
+       vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+       status = "okay";
 };
 
 &usb3_dwc3 {
@@ -301,8 +704,24 @@
        extcon = <&extcon_usb>;
 };
 
+&usb3phy {
+       status = "okay";
+
+       vdda-phy-supply = <&vreg_l1a_0p875>;
+       vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
 /* GT9286 analog supply */
 &vreg_l28_3p0 {
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <2800000>;
 };
+
+&wifi {
+       status = "okay";
+
+       vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+       vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+       vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+       vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};